Computer Engineering Commons^™

Examination Of The Nonlinear Dynamics Of A Chaotic Acousto-Optic Bragg Modulator With Feedback Under Signal Encryption And Decryption, Mohammed A. Al-Saedi, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

An acousto-optic Bragg cell with first-order feedback, which exhibits chaotic behavior past the threshold for bistability, was recently examined for possible chaotic encryption and recovery of simple messages (such as low-amplitude periodic signals) applied via the bias input of the sound cell driver. We carry out a thorough examination of the nonlinear dynamics of the Bragg cell under intensity feedback for (i) dc variations of the feedback gain (β˜) and the phase shift parameter (α^ 0) and (ii) ac variations of α^ 0; total under signal encryption, investigating both from two different perspectives: (i) examining chaos in view of the …

Commentary And Interpretations Of Tagore’S 'Ode To Africa', Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

This is a commentary/interpretation of Rabindranath Tagore's poem "Ode to Africa."

Time Dynamics Of Self-Pumped Reflection Gratings In A Photorefractive Polymer, Partha P. Banerjee, S. H. Buller, C. M. Liebig, S. A. Basun, Gary Cook, Dean R. Evans, Pierre-Alexandre Blanche, J. Thomas, Cory W. Christenson, N. Peyghambarian

Electrical and Computer Engineering Faculty Publications

The time dynamics of self-pumped reflection gratings in a commonly used photorefractive polymer PDCST:PVK:ECZ-BBP:C60 with no additional electron sources or traps is investigated. While holes are normally the mobile charges and responsible for grating formation, our experimental observations, analyzed using multi-exponential fitting curves, show evidence of electrons in addition to holes as charge carriers, particularly above an applied field of 40 V/μm.

The dependence of effective carrier mobilities on the applied electric field, deduced from experimental results, show stronger field dependence of electron mobility at high electric fields. At an applied field of 70 V/μm, electron and hole mobilities become …

Forecasting Natural Gas Consumption In İstanbul Using Neural Networks And Multivariate Time Series Methods, Ömer Fahretti̇n Demi̇rel, Seli̇m Zai̇m, Ahmet Çalişkan, Pinar Özuyar

Turkish Journal of Electrical Engineering and Computer Sciences

The fast changes and developments in the world's economy have substantially increased energy consumption. Consequently, energy planning has become more critical and important. Forecasting is one of the main tools utilized in energy planning. Recently developed computational techniques such as genetic algorithms have led to easily produced and accurate forecasts. In this paper, a natural gas consumption forecasting methodology is developed and implemented with state-of-the-art techniques. We show that our forecasts are quite close to real consumption values. Accurate forecasting of natural gas consumption is extremely critical as the majority of purchasing agreements made are based on predictions. As a …

Strongly Complete Logics For Coalgebras, Alexander Kurz, Jiří Rosický

Engineering Faculty Articles and Research

Coalgebras for a functor model different types of transition systems in a uniform way. This paper focuses on a uniform account of finitary logics for set-based coalgebras. In particular, a general construction of a logic from an arbitrary set-functor is given and proven to be strongly complete under additional assumptions. We proceed in three parts.

Part I argues that sifted colimit preserving functors are those functors that preserve universal algebraic structure. Our main theorem here states that a functor preserves sifted colimits if and only if it has a finitary presentation by operations and equations. Moreover, the presentation of the …

A Video Encoder Design Combining Edge-Adaptive Lifting And Scalable Block-Matching With Motion Compensation, Sedat Telçeken, Ömer Nezi̇h Gerek

Turkish Journal of Electrical Engineering and Computer Sciences

This study aimed to achieve video compression by using a novel lifting-based hybrid encoder that also uses motion compensation. The proposed encoder separates video frames into temporal groups, within which certain frames are selected for producing temporal and spatial predictions over the rest of the frames. The predictions utilize spatiotemporal lifting together with motion compensation. The combination of spatial information with temporal changes is inspired from the idea of edge-adaptive lifting, which alters prediction directions in images. A further incorporation of well-known block-matching methods with different levels was observed to improve the performance. To provide the first compression results, unpredicted …

Tunable Srr-Based Substrate For A Microstrip Patch Antenna, Adnan Sondaş, Mustafa Hi̇kmet Bi̇lgehan Uçar, Yunus Emre Erdemli̇

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a microstrip patch antenna over an artificial substrate composed of split-ring resonator (SRR) elements is introduced. As the SRR-based substrate provides miniaturization for the patch, metallic loadings placed between the rings of the SRR elements offer frequency-tuning capability. Practical switch models are employed in lieu of those loadings to demonstrate dynamic control of the operational frequency. The full-wave analysis and design of the proposed tunable patch were carried out using CST Microwave Studio, and the cross-comparisons were provided via Ansoft HFSS. Preliminary measurements are also presented, demonstrating the prospective performance of the proposed design.

Research On Cutoff Wavelength Of Dominant Mode And Field Patterns In Trapezoidal Microshield Lines, Hai Sun, Yujiang Wu

Turkish Journal of Electrical Engineering and Computer Sciences

The influence of the position of the metallic signal strip on the cutoff characteristic of the dominant mode and the field patterns in 3 types of trapezoidal microshield lines are calculated by the edge-based finite element method. These trapezoidal microshield lines include trapezoidal microshield lines with a single signal line, dual signal lines, and 3 signal lines. The cutoff wavelength of the dominant mode can be adjusted by changing the dimensions of metallic signal strips as well as by adjusting their positions. Field patterns of the dominant mode and the first-higher-order mode for different dimensions and the dielectric constant of …

A New Multipath Channel Transformation Technique, Tuğrul Çavdar

Turkish Journal of Electrical Engineering and Computer Sciences

A new channel transformation technique is introduced in this paper The technique is employed on the receiver side and has 2 filters. The first filter is the inverse complex conjugate of the estimated channel. The profile of this filter's output is triangular. The taps of the second filter are calculated according to the output of the first filter to produce an exponentially decreasing profile. This technique transforms most channel profiles to exponentially decreasing channel profiles. Thus equalizers adopting the proposed technique may have better bit error rates and lower computational complexity on frequency-selective channels. This paper evaluates the efficiency of …

Effects Of Diacritics On Turkish Information Retrieval, Adi̇l Alpkoçak, Meltem Ceylan

Turkish Journal of Electrical Engineering and Computer Sciences

We investigate the effects of improper use of diacritics in the Turkish alphabet on information retrieval. A diacritic is simply a supplementary sign added to a letter to change the sound value of the letter, and the Turkish alphabet has 5 special letters derived from Latin by adding different diacritics. The statistical analysis performed in this study shows that retrieval performance significantly decreases when documents and queries contain letters with different forms, such that documents consist of letters with diacritics while queries consist of standard Latin letters and vice versa. In order to tackle this challenge, we propose 3 approaches: …

Context Gathering And Management For Centralized Context-Aware Handover In Heterogeneous Mobile Networks, Behrouz Shahgholi Ghahfarokhi, Naser Movahhedinia

Turkish Journal of Electrical Engineering and Computer Sciences

Context-aware handover decision has recently been considered as a candidate for next-generation heterogeneous wireless networks. The context-aware handover methods proposed in the literature differ in some aspects, including the location of the handover decision (distributed or centralized). Depending on the location of the decision point, the appropriate part of the context knowledge should be transferred in those methods. This paper proposes a context gathering mechanism for a policy-based context-aware handover method, which implements mobile-initiated and network assisted handover. The proposed network context gathering mechanism is based on a media-independent handover (MIH) framework and the paper justifies the usability of the …

Observer Path Design By Imitation Of Competing Constraints For Bearing Only Tracking, Ridvan Gürcan, Mesut Kartal

Turkish Journal of Electrical Engineering and Computer Sciences

In the bearing only tracking (BOT) problem the observer tries to estimate the position of the target. The observer maneuver is a requirement to guarantee the uniqueness of the estimation. Determining an observer maneuver for BOT is a difficult problem due to its nonlinear nature. This paper proposes a new method that combines the reference BOT scenarios as a priori knowledge with the incoming bearing measurements to obtain an observer maneuver in a generic optimization framework. The use of a priori knowledge makes the observer maneuver design more realistic. The maneuver recommendation process uses the imitation of competing constraints. In …

A Novel Three-Phase Transformer Hysteresis Model In Matlab^{Tm} Simulink, Okan Özgönenel, Kami̇l Ri̇fat İrfan Güney, Ömer Usta, Hasan Di̇ri̇k

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a new transformer model displaying hysteresis using the MATLAB{\texttrademark} Simulink environment. The proposed model displays a complete scheme for the simulation of 3-phase transformers. The new model is mainly based on the transmission line model and the Jiles-Atherton model of a power system using lumped parameters. Jiles-Atherton model parameters were determined by curve fitting and numerical optimization iteration. The developed model is particularly suitable for fault analysis and protective relaying studies under harmonic conditions where the transformer is driven into the nonlinear regime. The performance of the method was evaluated by both theorical and experimental data.

New Change Impact Factor Estimation In Software Development, Murat Kahraman Güngör, Ersi̇n Elbaşi, James Walter Fawcett

Turkish Journal of Electrical Engineering and Computer Sciences

Change in software is always an essential part of software development and maintenance. Estimating a proposed change's effect on the later phases of the development helps project managers and developers with decision-making and predicting future progress. During development, on some occasions, speedy solutions are necessary to meet project schedules. Such quick changes may lead to major quality flaws in the long term, even though they solve local problems in the short term. Controlled management of change is achieved by being able to estimate the impact of changes. In this paper, we propose a new change impact factor estimation and present …

An Improved Fastslam Framework Using Soft Computing, Ramazan Havangi, Mohammad Ali Nekoui, Mohammad Teshnehlab

Turkish Journal of Electrical Engineering and Computer Sciences

FastSLAM is a framework for simultaneous localization and mapping (SLAM) using a Rao-Blackwellized particle filter. However, FastSLAM degenerates over time. This degeneracy is due to the fact that a particle set estimating the pose of the robot loses its diversity. One of the main reasons for losing particle diversity in FastSLAM is sample impoverishment. In this case, most of the particle weights are insignificant. Another problem of FastSLAM relates to the design of an extended Kalman filter (EKF) for the landmark position's estimation. The performance of the EKF and the quality of the estimation depend heavily on correct a priori …

Action-Reaction Based Parameters Identification And States Estimation Of Flexible Systems, Islam Shoukry, Emrah Deni̇z Kunt, Asif Sabanovic

Turkish Journal of Electrical Engineering and Computer Sciences

This work attempts to identify and estimate flexible system's parameters and states by a simple utilization of the Action-Reaction law of dynamical systems. Attached actuator to a dynamical system or environmental interaction imposes an action that is instantaneously followed by a dynamical system reaction. The dynamical system's reaction carries full information about the dynamical system including system parameters, dynamics and externally applied forces that arise due to system interaction with the environment. This in turn implies that the dynamical system's reaction can be considered as a natural feedback as it carries full coupled information about the dynamical system. The idea …

Reducing Electromagnetic Interferences In Flyback Ac-Dc Converters Based On The Frequency Modulation Technique, Gökhan Çabuk, Selçuk Kilinç

Turkish Journal of Electrical Engineering and Computer Sciences

One of the most preferable types of switched-mode power supplies (SMPS) is the flyback converter, due to its wide range of application areas. Properties such as low cost, provision of multiple output voltage terminals, and higher efficiencies make it important, and hence its usage in technologies including cell phone chargers, personal computers, set-top boxes, and televisions is increasing. Special attention should be paid to the design of this type of converter due to its working principles and electromagnetic interference (EMI) performance. Rapid switching of high current and high voltage during the operation of SMPS causes an EMI problem. The level …

Lyapunov's Direct Method For Stabilization Of The Furuta Pendulum, Türker Türker, Haluk Görgün, Gali̇p Cansever

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a novel stabilization result for the Furuta pendulum for a large region of attraction including almost all of the upper half plane. The solution is obtained via constructing a Lyapunov function after set of coordinate changes. Then, a set of differential equations are solved to achieve asymptotic stability which is proved in accordance with La Salle's invariance principle. The effectiveness of the proposed stabilization method is illustrated with simulation studies.

Energy Savings In Simultaneous Multi-Threaded Processors Through Dynamic Resizing Of Datapath Resources, Gürhan Küçük, Mi̇ne Mesta

Turkish Journal of Electrical Engineering and Computer Sciences

Nowadays, all the designers of systems from high-performance servers to battery-operated handheld devices aim for reliability, high-performance and longevity. Central within these aims the issue of processor power consumption is becoming increasingly important. In this study, we aim to adapt our already-proven method for single-threaded superscalar processors to simultaneous multi-threaded (SMT) processors for energy savings. The original method focused on resizing datapath resources according to the demands of running applications. To achieve this, the targeted resources are physically divided into multiple partitions, and turned on and off according to the needs of the applications. Since, the energy consumption of the …

An Improved Distributed Power-Control Scheme For Cellular Mobile Systems, Hamid Farrokhi, Mostafa Rezayi

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a new distributed power-control (DPC) scheme is suggested to improve convergence speed and system robustness against carrier-to-interference-ratio (CIR) estimation errors. To expedite the CIR balancing in our DPC scheme, an instability detection rule was used. As compared with Foschini's DPC (FDPC) method, numerical results indicated that the proposed algorithm achieves performance improvements in terms of outage probability as well as in the algorithm's convergence speed. More specifically, by appropriate selection of some parameters, the algorithm speed reduces from about 90 iterations in FDPC to 9 iterations in the proposed algorithm. The system robustness against CIR estimation errors …

Design Parameters And Uncertainty Bound Estimation Functions For Adaptive-Robust Control Of Robot Manipulators, Recep Burkan

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a parameter and uncertainty bound estimation functions for adaptive-robust control of robot manipulators are developed. A Lyapunov function is defined and parameters and uncertainty bound estimation functions are developed based on the Lyapunov function. Thus, stability of an uncertain system is guaranteed and uniform boundedness of the tracking error is achieved. As distinct from previous parameter and bound estimation laws, the parameters and uncertainty bounds are updated as a function of a combination of trigonometric function depending on robot parameters and tracking error. Based on the same Lyapunov function, a robust control law is also defined and …

A Comparative Study Of Blind And Nonblind Trainings In A Single-Carrier Wimax (Ieee 802.16-2004) Radio, Ali̇ Özen

Turkish Journal of Electrical Engineering and Computer Sciences

Experimental and theoretical bit error rate performance evaluations of blind and nonblind training techniques are obtained by using a single-carrier WiMAX (IEEE 802.16-2004) radio for high-order quadrature amplitude modulation channels. Instead of using a certain type of channel profile, this study concentrates on true frequency-selective Rayleigh fading channels and also evaluates the fast fading scenario of Rayleigh channels in a real-time WiMAX radio environment around 3.5 GHz. The popular least mean squares (LMS) learning algorithm and constant modulus learning algorithm (CMA) are used as benchmarks in an investigation of nonblind and blind trainings, namely recursive least squares (RLS), modified-CMA, normalized-CMA, …

Load Sharing Based On Moving Roles In Multiagent Systems, Şebnem Bora, Ali̇ Murat Ti̇ryaki̇, Oğuz Di̇kenelli̇

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, we present a load-sharing approach based on the refactoring of agents. According to our approach, the role(s) that makes an agent overloaded is identified and transferred to less loaded agents. The excess workload of this heavily loaded agent is then transferred to the new agent. This approach defines a new agent, called the ``monitor agent,'' which monitors the workload of agents in the organization and decides about the refactoring of the agents. The monitor agent uses the platform ontology, which explicitly describes the components of the agent organization, including agents and their roles, plans, and workloads. This …

Fuzzy Logic Control For A Wind/Battery Renewable Energy Production System, Onur Özdal Mengi̇, İsmai̇l Hakki Altaş

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a designed proportional-integral (PI) controller and a fuzzy logic controller (FLC) that fix the voltage amplitude to a constant value of 380 V and 50 Hz for loads supplied from a wind/battery hybrid energy system are explained and compared. The quality of the power produced by the wind turbine is affected by the continuous and unpredictable variations of the wind speed. Therefore, voltage-stabilizing controllers must be integrated into the system in order to keep the voltage magnitude and frequency constant at the load terminals, which requires constant voltage and frequency. A fuzzy logic-based controller to be used …

Training Data Optimization For Anns Using Genetic Algorithms To Enhance Mppt Efficiency Of A Stand-Alone Pv System, Ahmet Afşi̇n Kulaksiz, Ramazan Akkaya

Turkish Journal of Electrical Engineering and Computer Sciences

Maximum power point tracking (MPPT) algorithms are used to force photovoltaic (PV) modules to operate at their maximum power points for all environmental conditions. In artificial neural network (ANN)-based algorithms, the maximum power points are acquired by designing ANN models for PV modules. However, the parameters of PV modules are not always provided by the manufacturer and cannot be obtained readily by the user. Experimental measurements implemented in the overall PV system may be used to obtain the ANN dataset. One drawback of this method is that the generalization ability of the neural network usually degrades and some data reducing …

Discrete Particle Swarm Optimization For The Team Orienteering Problem, Ai̇şe Zülal Şevkli̇, Fati̇h Erdoğan Sevi̇lgen

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a novel discrete particle swarm optimization (PSO) algorithm is proposed to solve the team orienteering problem (TOP). Discrete evaluation is achieved by redefining all operators and operands used in PSO. To obtain better results, a strengthened PSO, which improves both exploration and exploitation during the search process, is employed. Our algorithm achieves the best known solutions in a short time compared to previous heuristics for the TOP.

Performance Analysis Of Wind Turbine-Driven Permanent Magnet Generator With Matrix Converter, Ramasamy Bharanikumar, A Nirmal Kumar

Turkish Journal of Electrical Engineering and Computer Sciences

Wind energy, among all of the renewable energy sources, has made rapid developments and significant inroads in electrical power systems. With the increased use of wind energy conversion systems (WECSs), several technologies have been developed. Since WECSs are more cost competitive, the comparison of different wind generator systems is the need of the hour. Permanent magnet generators employing these technologies have some significant advantages over conventional generators, such as no need of excitation, low volume and weight, high precision, and deletion of the gearbox. A variable-speed WECS with a permanent magnet generator and a matrix converter is proposed in this …

Economic Analysis Of A Wind-Battery Hybrid System: An Application For A House In Gebze, Turkey, With Moderate Wind Energy Potential, Bahti̇yar Dursun, Ci̇han Gökçöl

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, the energy demand of a house in Gebze, Turkey, is met by using wind energy as a primary energy source combined with rechargeable batteries. The wind-battery system is simulated by MATLAB while considering that energy continuity is maintained by using a sufficient number of batteries. A life-cycle cost analysis is carried out over a 20-year system lifetime because the operating time of the hybrid system is subject to the turbine life, usually assumed to be 20 years. The wind turbine generators considered are of various nominal powers, ranging from 0.6 to 450 kW. For each wind turbine, …

Short-Term Wind Speed Estimation Based On Weather Data, Okan Özgönenel, David W.P. Thomas

Turkish Journal of Electrical Engineering and Computer Sciences

For accurate and efficient use of wind power, it is important to know the statistical characteristics, availability, diurnal variation, and prediction of wind speed. Prediction of wind power permits the scheduling of the connection or the disconnection of wind turbines to achieve optimal operating costs. In this paper, a simple and accurate method for predicting wind speed based on weather-sensitive data is presented. The proposed wind speed prediction system is cost-effective and only needs wind speed data at 40 m and weather data to forecast wind speeds at 50 m and 60 m for the current and next months. Hellman …

Compact Dual-Band Split-Ring Antenna For 2.4/5.2 Ghz Wlan Applications, Siddik Cumhur Başaran

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a compact dual-band printed antenna for 2.4/5.2 GHz WLAN applications. The radiating elements of the proposed antenna are composed of rectangular split-ring elements and metallic loadings placed appropriately between the rings. The antenna size is very compact (22 \times 26 \times 1.6 mm), and it can be integrated easily with other RF front-end circuits. It is demonstrated that the proposed antenna can completely cover the required bandwidths of IEEE 802.11b (2.4-2.484 GHz) and IEEE 802.11a (5.15-5.35 GHz) with satisfactory radiation characteristics. Analysis and design of the proposed antenna was carried out with the Ansoft highfrequency structure simulator. …