Computer Engineering Commons^™

Printed Circuit Board For Introductory Animatronics Course, Preston Brown

Computer Engineering

For many years, freshmen Computer Engineering students at California Polytechnic State University have taken a course that introduces them to the “processes of electronics manufacturing. They are lectured on concepts such as CAD/CAM design, Design for Manufacture (DFM), documentation requirements, prototyping and production planning”. The laboratory portion of the course allows students to “use hands-on techniques to solidify knowledge of project planning, soldering, automation, hand tool usage and production methods” by manufacturing their own power supply, starting with aluminum sheets, a bag of components, and and an unassembled printed circuit board (PCB).

While the project is popular among students, department …

Universal Uav Payload Interface, Nolan Reker, David Troy Jr, Drew Troxell

Computer Engineering

Unmanned Aerial Vehicle (UAV) technology is becoming increasingly accessible for civilian use. Both open-source and commercial-purpose UAVs can be obtained affordably or even built. However, the platforms available are very segmented in their customization to a specific application (i.e. land surveying, payload delivery). This project aims to create a Universal Payload Interface (UPI) mounted to the underside of multi-rotors or other UAVs to enable the attachment of customizable sensor payloads. These payloads allow a single UAV to be rapidly reconfigured to perform a multitude of tasks.

The Universal Payload Interface facilitates communication between the payload, onboard flight controller, and operator …

Forest Sign Maker, Victor Espinosa Iii, Kevin Ly, Lisa Yip

Mechanical Engineering

Executive Summary:

The Inyo National Forest is arguably one of the most beautiful locations in California, containing natural masterpieces such as Mount Whitney and the Ancient Bristlecone Pine Forest. Despite its magnificence, the Inyo National Forest can be a treacherous region. The Friends of the Inyo take pride in being able to facilitate the viewing experience for all outdoorsmen by maintaining the mountain trails, which includes providing adequate trail signage.

Unfortunately, there is a fundamental issue with the recent state of trail signage in the Inyo National Forest: the rate at which signs are being vandalized or naturally destroyed is …

Power Supply For Driving High Power Leds With Wireless Control, Joshua C. Avery

Computer Engineering

This project is the design of a power supply for driving high power light emitting diodes (LEDs) with wireless control. The project is divided into two sections, the power supply for driving the LED lights, and the wireless control and fan power supply.

M-1: The Mealy Open Source Custom Midi Controller, Garrett Leung, Darren O. Mistica

Electrical Engineering

With the high price of large mixing consoles, aspiring artists are restricted to using a mouse to control digital facsimiles of knobs, faders, switches, and buttons. Though using the software controls is considered a simple task, dedicated hardware allows for tactile, visual, and utility. At a low cost, the heart of the MTech M-1 can be customized and placed into any shell with any combination of controls as possible with the underlying platform.

Modern MIDI controllers require significant physical space due to their preset button layout and space consuming setups. Despite their high price, modern MIDI controllers have only one …

Assessing Impact Of Exposure To Cyberphysical Systems On Student Interest In Information Technology Careers, Mayari I. Serrano Anazco

Purdue Polytechnic Masters Theses

The main purpose of this project is to determine if the use of Information Technology (IT) tools, specifically cyberphysical devices, in outreach sessions will promote interest of young individuals in pursuing IT careers. The Diversity office of Purdue’s College of Technology offers a number of outreach sessions to a variety of target populations throughout the year. Each department in the college has an opportunity to present a session related to a field of study offered by the department. The research was carried out thru the Spring 2015 semester during the DOiT and Vision outreach programs offered through the college’s Diversity …

Design And Development Of Two Component Hydrogel Ejector For Three-Dimensional Cell Growth, Thomas Dunkle, Jessica Deschamps, Connie Dam

Honors Scholar Theses

Hydrogels are useful in wound healing, drug delivery, and tissue engineering applications, but the available methods of injecting them quickly and noninvasively are limited. The medical industry does not yet have access to an all-purpose device that can quickly synthesize hydrogels of different shapes and sizes. Many synthesis procedures that have been developed result in the formation of amorphous hydrogels. While generally useful, amorphous hydrogels exhibit limited capability in tissue engineering applications, especially due to their viscous properties. This endeavor aims to modulate the appropriate gelation parameters, optimize the injection process, and create a prototype that allows for the extrusion …

Synthetic Aperture Radar: Rapid Detection Of Target Motion In Matlab, Daniel S. Kassen

Master's Theses

Synthetic Aperture Radar (SAR) has come into widespread use in several civilian and military applications. The focus of this paper is the military application of imaging point targets captured by an airborne SAR platform. Using the traditional SAR method of determining target motion by analyzing the difference between subsequent images takes a relatively large amount of processing resources. Using methods in this thesis, target motion can be estimated before even a single image is obtained, reducing the amount of time and power used by a significantly large amount. This thesis builds on work done by Brain Zaharri and David So. …

Disc Golf Locator, Christian Wallenfelsz, Shane Gamble, Noah Sanor, Brandon Linhart

Electrical and Computer Engineering Faculty Research

Disc golf is a game similar to traditional golf where players throw small plastic discs into chain-link nets. Disc golf courses cover several acres containing lakes, small wooded areas, large bushes, and grassy fields. It is not uncommon to accidentally throw a golf disc into the woods or bushes, so it is the goal of this project to create a device to locate the disc and make suggestions for the player to improve performance. A small device will be attached the disc which will track its location and flight characteristics. The device will contain a GPS receiver, an inertial measurement …

Remote Mobile Screen (Rms): An Approach For Secure Byod Environments, Santiago Manuel Gimenez Ocano

School of Computing: Dissertations, Theses, and Student Research

Bring Your Own Device (BYOD) is a policy where employees use their own personal mobile devices to perform work-related tasks. Enterprises reduce their costs since they do not have to purchase and provide support for the mobile devices. BYOD increases job satisfaction and productivity in the employees, as they can choose which device to use and do not need to carry two or more devices.

However, BYOD policies create an insecure environment, as the corporate network is extended and it becomes harder to protect it from attacks. In this scenario, the corporate information can be leaked, personal and corporate spaces …

Comparing The Efficiency Of Heterogeneous And Homogeneous Data Center Workloads, Brandon Kimmons

College of Graduate Studies: Theses & Dissertations

Abstract

Information Technology, as an industry, is growing very quickly to keep pace with increased data storage and computing needs. Data growth, if not planned or managed correctly, can have larger efficiency implications on your data center as a whole. The long term reduction in efficiency will increase costs over time and increase operational overhead. Similarly, increases in processor efficiency have led to increased system density in data centers. This can increase cost and operational overhead in your data center infrastructure.

This paper proposes the idea that balanced data center workloads are more efficient in comparison to similar levels of …

Design Of An All-In-One Embedded Flight Control System, Joel D. Elmore

Theses and Dissertations

This thesis describes an all-in-one flight control system (FCS) that was designed for unmanned aerial vehicles (UAVs). The project focuses on the embedded hardware aspect of a stand-alone system with low-cost and reliability in mind.

High Definition 3d Printing – Comparing Sla And Fdm Printing Technologies, Tyler Finnes

The Journal of Undergraduate Research

For consumer level additive manufacturing, there are currently two main methods to 3D print objects: Stereo lithography and Fused Deposition Modeling. Both processes add material, layer by layer, to create objects. Stereo lithography (SLA) uses a UV light source to selectively cure resin while Fused Deposition Modeling (FDM) extrudes semi-liquid plastic in a specific layout to create objects. As with most technologies, both styles of printing have advantages and disadvantages. The biggest advantage of SLA 3D printing is very high resolution. SLA 3D printing can produce objects with more than double the resolution of FDM printers. The mUVe 3D SLA …

Applications Of Ultrasonic Non-Destructive Testing In 3d Printing, Parker Lawley

The Journal of Undergraduate Research

To determine the capabilities of ultrasonic non-destructive testing methods in 3D printing, test specimens were designed to evaluate advantages and limitations in using ultrasoundC-scanning to determine 3D printing effectiveness. A Matlab program was written to process the data obtained from the UTwin software and ultrasound tank, as well as produce 3D models of the parts being tested. Thickness, types of features, and various printing methods were evaluated to determine how these characteristics vary in effectiveness of C-scan imaging. Results from the UTwin software C-scans were compared to the Matlab program’s imaging and three-dimensional modeling. After determining the capabilities of ultrasonic …

Stargrazer One: A New Architecture For Distributed Maximum Power Point Tracking Of Solar Photovoltaic Sources, Edgard Munoz-Coreas

Theses and Dissertations--Electrical and Computer Engineering

The yield from a solar photovoltaic (PV) source is dependent on factors such as light and temperature. A control system called a maximum power point tracker (MPPT) ensures that the yield from a solar PV source is maximized in spite of these factors. This thesis presents a novel implementation of a perturb and observe (PO) MPPT.

The implementation uses a switched capacitor step down converter and a custom digital circuit implementation of the PO algorithm. Working in tandem, the switched capacitor step down converter and the custom digital circuit implementation were able to successfully track the maximum power point of …

Ultra-Fast, Autonomous, Reconfigurable Communication System, Paul Bupe Jr

College of Graduate Studies: Theses & Dissertations

The recent years have witnessed an increase in natural disasters in which the destruction of essential communication infrastructure has significantly affected the number of casualties. In 2005, Hurricane Katrina in the United States resulted in over 1,900 deaths, three million land-line phones disconnections, and more than 2000 cell sites going out of service. This incident highlighted an urgent need for a quick-deployment, efficient communication network for emergency relief purposes. In this research, a fully autonomous system to deploy Unmanned Aerial Vehicles (UAVs) as the first phase disaster recovery communication network for wide-area relief is presented. As part of this system, …

Hadoop Based Data Intensive Computation On Iaas Cloud Platforms, Sruthi Vijayakumar

UNF Graduate Theses and Dissertations

Cloud computing is a relatively new form of computing which uses virtualized resources. It is dynamically scalable and is often provided as pay for use service over the Internet or Intranet or both. With increasing demand for data storage in the cloud, the study of data-intensive applications is becoming a primary focus. Data intensive applications are those which involve high CPU usage, processing large volumes of data typically in size of hundreds of gigabytes, terabytes or petabytes. The research in this thesis is focused on the Amazon’s Elastic Cloud Compute (EC2) and Amazon Elastic Map Reduce (EMR) using HiBench Hadoop …

Wingtip Dynamics Simulator, Eugene Fox, Nick Rodriguez, Steven Rieber

Mechanical Engineering

Raytheon is a defense contracting company with an electronic warfare division that is developing a radio frequency signal triangulation system. Part of the focus in improving this technology is the need for accurate and real time locational knowledge of the signal receivers, which are located at the tips of aircraft wings. Due to turbulence during flight, the fluttering motion of the wings alter the distance and angle relationships of the two receivers and add noise to the received signal data, which negatively affect the triangulation estimates. To mitigate this error caused by the wing flutter, Raytheon is developing a software …

Optimizing Performance And Scalability On Hybrid Mpsocs, Hongyuan Ding

Graduate Theses and Dissertations

Hardware accelerators are capable of achieving significant performance improvement. But design- ing hardware accelerators lacks the flexibility and the productivity. Combining hardware accelerators with multiprocessor system-on-chip (MPSoC) is an alternative way to balance the flexibility, the productivity, and the performance. However, without appropriate programming model it is still a challenge to achieve parallelism on a hybrid (MPSoC) with with both general-purpose processors and dedicated accelerators. Besides, increasing computation demands with limited power budget require more energy-efficient design without performance degradation in embedded systems and mobile computing platforms. Reconfigurable computing with emerging storage technologies is an alternative to enable the optimization …

Fresh Bytes - Connected Hydroponics For Small-Scale Growing, Jack Bowen

Liberal Arts and Engineering Studies

Many users are now transitioning to small-scale hydroponics and aquaponics at home. There can be a barrier to entry with these systems as there is a delicate balance of chemicals, pH, etc. that must be maintained. There are sensors for these various components but they are either aimed at commercial production or are un-automated. Fresh Bytes is a microcomputer with sensors to detect all of these unseen components in a hydroponic system. A prototype of this microcomputer is produced along with CAD plans for more professional versions of it. The sensors are verified and future development is contemplated.

Improved Microrobotic Control Through Image Processing And Automated Hardware Interfacing, Archit R. Aggarwal, Wuming Jing, David J. Cappelleri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Untethered submilliliter-sized robots (microrobots) are showing potential use in different industrial, manufacturing and medical applications. A particular type of these microrobots, magnetic robots, have shown improved performance in power and control capabilities compared to the other thermal and electrostatic based robots. However, the magnetic robot designs have not been assessed in a robust manner to understand the degree of control in different environments and their application feasibility. This research project seeks to develop a custom control software interface to provide a holistic tool for researchers to evaluate the microrobotic performance through advance control features. The software deliverable involved two main …

Foss Big Data Storage Solution, Nurdeen Salami

STAR Program Research Presentations

NASA projects require a reliable approach to store large volumes of data. Accordingly, it is crucial to adopt a lightweight, reliable, and scalable database. Current NASA databases bear costly license fees with undesirable speed and flexibility. The purpose of utilizing the AERO Institute as an IT test bed, or “Sandbox,” is to design, build, test, and implement software solutions prior to transfer to NASA projects. Cassandra coupled with the Astyanax API is a viable solution for storing big data. Store a minimum of 2GB of C-FOSS data in multiple file formats (.csv, .log, .xml, and .jpg). Use benchmark tests to …

Idpal – A Partially-Adiabatic Energy-Efficient Logic Family: Theory And Applications To Secure Computing, Mihail T. Cutitaru

Electrical & Computer Engineering Theses & Dissertations

Low-power circuits and issues associated with them have gained a significant amount of attention in recent years due to the boom in portable electronic devices. Historically, low-power operation relied heavily on technology scaling and reduced operating voltage, however this trend has been slowing down recently due to the increased power density on chips. This dissertation introduces a new very-low power partially-adiabatic logic family called Input-Decoupled Partially-Adiabatic Logic (IDPAL) with applications in low-power circuits. Experimental results show that IDPAL reduces energy usage by 79% compared to equivalent CMOS implementations and by 25% when compared to the best adiabatic implementation. Experiments ranging …

Spirit: A Home Automation System, Andrew Choi

Computer Engineering

Spirit is a multi device home automation system. Designed and implemented for California Polytechnic State University’s Senior Project program, this project was worked on during the duration of two school quarters from January 7, 2014 to June 13, 2014. The system consists of monitor/controllers designed to carry out everyday tasks in the average American household and an accompanying mobile application designed to receive information and control the devices. The monitor/controllers, or “Spirits”, are primarily developed using Arduino development tools and Arduino microcontroller boards. The spirits include a thermostat, named Tempus, an electrical outlet, Electrus, and a wall light switch, Luxos.

Chromium Os On Freescale I.Mx6q, Pushpal Sidhu

Computer Engineering

This projects intention is to get Chromium OS running on a Freescale i.MX6q processor, a processor based on the ARM® Cortex™-A9 architecture. The development board I used is the Ventana GW5400 by Gateworks. This project inherently meant using Chromium OS's development system which meant I created a board specific package for the Ventana single board computer. This project is a proof of concept that can mean extending Chromium OS to various implementations of the ARM® Cortex™-A9 architecture.

Battery Management System, Michael Desando, Kyle Woody

Electrical Engineering

Problem Statement:

There have been recent reports of multi-million dollar companies having to recall entire projects due to their BMS’s malfunctioning or operating incorrectly. The purpose of this project is to analyze the future of batteries, the Lithium-Ion cell, and to exercise a BMS to better understand its capabilities and possible cases for errors. Lithium ion batteries are intolerant of overcharge and overdischarge. Abuse of this kind can result in high temperatures, venting of gases, fire, or explosion. Therefore battery management systems have been devised to prevent such abuse. Recent events such as fires on the Boeing Dreamliner and the …

All Purpose Mobile Gps, James C. Smith, Matt Weege, Kevin Peters

Electrical Engineering

The aim of the All Purpose Mobile GPS (The System) is to create a GPS tracking device that can accurately record location and calculate velocity, distance traveled and elevation change even when the satellite signal is lost. This data can later overlay on existing internet-based maps illustrating a trip to oneself or others. The portable tracker consumes very little power achieving several days’ worth of power in a single charge. A solar cell provides a quick battery boost in a pinch. SD Card storage increases compatibility with computers and other forms of data transfer. Data processing, such as viewing the …

Ad-Hoc Hid: Modular Wireless Human Interface Device, Joseph A. Mazzanti

Electrical Engineering

Ad-Hoc HID is a modular, reprogrammable Human Interface Device. This device is intended to function as a keyboard, gamepad, or mouse, according to the user's needs. The final project is intended to be switch agnostic, making the final product adaptable to the user’s needs.

Design Of Cpu Simulation Software For Armv7 Instruction Set Architecture, Dillon Tellier

Computer Engineering

Simulations have long been a part of the engineering process in both the professional and academic domain. From a pedagogic standpoint, simulations allow students to explore the dynamics of engineering scenarios by controlling variables, taking measurements, and observing behavior which would be difficult or impossible without simulation. One such tool is a CPU simulator used in Cal Poly’s Computer Architecture classes; this software simulates an instruction accurate operation of a computer processor and reports statistics regarding the execution of the supplied compiled machine code. For the last several years Cal Poly’s computer architecture classes have used a previous version of …

The Construction And Characterization Of A Magneto-Optical Trap For Rubidium-87 And Electromagnetically-Induced Transparency In Rubidium-87 In A Vapor Cell, Yu Liu

Honors College Theses

Recent years have observed fast developments in neutral atomic vapor based quantum information storage technology. The technique utilizes light fields in the optical wavelength region as signal carrier and retriever and neutral atomic systems (e.g. single atoms, ensembles of atoms, atom-like defects in solids) as storage media. Photons are robust carriers of information due to their high velocity (c = 2.998 x 10⁸ m/s) and ease of transportation (they propagate rectilinearly with low loss). Their high mobility, however, makes it a challenging task to spatially localize and therefore store them. Atoms (or atom-like systems), on the other hand, can …