Computer Engineering Commons^™

Developing A Forensic Continuous Audit Model, Grover S. Kearns, Katherine J. Barker, Stephen P. Danese

Journal of Digital Forensics, Security and Law

Despite increased attention to internal controls and risk assessment, traditional audit approaches do not seem to be highly effective in uncovering the majority of frauds. Less than 20 percent of all occupational frauds are uncovered by auditors. Forensic accounting has recognized the need for automated approaches to fraud analysis yet research has not examined the benefits of forensic continuous auditing as a method to detect and deter corporate fraud. The purpose of this paper is to show how such an approach is possible. A model is presented that supports the acceptance of forensic continuous auditing by auditors and management as …

Analysis Of Data Remaining On Second Hand Adsl Routers, Patryk Szewczyk

Journal of Digital Forensics, Security and Law

In theory, an ADSL router can provide an additional layer of security to a wired and wireless network through; access control, wireless encryption, firewall rule sets, and network event logging. An ADSL router may also contain the users’ usage habits and broadband account credentials. However, end-users may be unaware of the intricacies of the security measures available and the potentially confidential information stored on their device. As a result a second hand ADSL router may contain a wealth of user-specific information if not wiped and disposed of in a secure manner. This paper shows the data that was acquired from …

Book Review: Online Privacy: Issues In The Digital Age, Darlene M. Tester

Journal of Digital Forensics, Security and Law

This book is one of a series of books Currie has written about online areas of concern. This is the sixth book in the series. The purpose of the book is to act as a primer for people in the IT field who may need a point of reference for Internet issues such as gaming, security and privacy. The book takes a high level look at the complexities of privacy online from social networking to hackers and provides insight into what the most pressing issues of privacy are online today.

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Technology Corner: Virtual Crime Scene Reconstruction: The Basics Of 3d Modeling, Nick V. Flor

Journal of Digital Forensics, Security and Law

Digital crime scenes take place in the context of physical crime scenes. Virtual crime scene reconstruction is an activity where investigators create a 3- dimensional (3-D) model of an actual crime scene for the purpose of determining the events that lead to the crime. While virtual crime scene reconstruction is currently used for analyzing physical scenes, it can also help investigators visualize and explore ways digital media could have been used to perpetrate a crime. In this technology corner we explore one of the technologies underlying virtual crime scene reconstruction: 3-D modeling.

Working Inside The Box: An Example Of Google Desktop Search In A Forensic Examination, Timothy J. Latulippe

Journal of Digital Forensics, Security and Law

Information and the technological advancements for which mankind develops with regards to its storage has increased tremendously over the past few decades. As the total amount of data stored rapidly increases in conjunction with the amount of widely available computer-driven devices being used, solutions are being developed to better harness this data. These types of advancements are continually assisting investigators and computer forensic examiners. One such application which houses copious amounts of fruitful data is the Google Desktop Search program. Coupled with tested and verified techniques, examiners can exploit the power of this application to cater to their investigative needs. …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Book Review: Iphone And Ios Forensics: Investigation, Analysis And Mobile Security For Apple Iphone, Ipad And Ios Devices, Christopher Schulte

Journal of Digital Forensics, Security and Law

These are exciting times for Digital Forensics practitioners. While our examinations of mobile devices (including cell phones and tablet computers) continue to bring new and sometimes hair-pulling challenges into our labs and on-site engagements, research and understanding of these tiny computers is increasing at what seems an exponential rate. This is especially true in the iOS (Apple Computer’s mobile operating system that powers the iPhone, iPad, iPod Touch and Apple TV) space. The diligent work of talented computer scientists in this field allows examiners everywhere to reap the benefits of easier, faster and more effective examinations that yield more accurate …

Investigating Modern Communication Technologies: The Effect Of Internet-Based Communication Technologies On The Investigation Process, Matthew Simon, Jill Slay

Journal of Digital Forensics, Security and Law

Communication technologies are commonplace in modern society. For many years there were only a handful of communication technologies provided by large companies, namely the Public Switched Telephone Network (PSTN) and mobile telephony; these can be referred to as traditional communication technologies. Over the lifetime of traditional communication technologies has been little technological evolution and as such, law enforcement developed sound methods for investigating targets using them. With the advent of communication technologies that use the Internet – Internet-based or contemporary communication technologies – law enforcement are faced with many challenges. This paper discusses these challenges and their potential impact. It …

Collaborative And Distributed Algorithms For Localization In Wireless Sensor Networks Based On The Solution Of Spatially Constrained Local And Sub-Local Problems, Juan De Dios Cota

Open Access Theses & Dissertations

In this research we present algorithms for the distributed and collaborative localization of nodes for applications in wireless sensor networks. The algorithms are distributed in the sense that each node can estimate its own position using only range information and position estimates from neighboring nodes. The algorithms aim at achieving good accuracy with low computational complexity and low energy consumption. We consider the full localization process consisting of an initialization stage followed by a refinement stage.

For initialization, we propose a \emph{bilateration} algorithm where each node uses a set of anchors and their respective ranges to solve a set of …

Algorithms For Training Large-Scale Linear Programming Support Vector Regression And Classification, Pablo Rivas Perea

Open Access Theses & Dissertations

The main contribution of this dissertation is the development of a method to train a Support Vector Regression (SVR) model for the large-scale case where the number of training samples supersedes the computational resources. The proposed scheme consists of posing the SVR problem entirely as a Linear Programming (LP) problem and on the development of a sequential optimization method based on variables decomposition, constraints decomposition, and the use of primal-dual interior point methods. Experimental results demonstrate that the proposed approach has comparable performance with other SV-based classifiers. Particularly, experiments demonstrate that as the problem size increases, the sparser the solution …

2d Gaussian Object Motion Detection, Miguel Angel Chaidez

Open Access Theses & Dissertations

Dr. John Moya, and associated research assistants, have previously created an image-change recognition algorithm (JESSE) to mark changes within an image. The focus of this thesis is to present a physical application and modification of this algorithm in order to detect a surgeon's hand and verify chip placement on a printed circuit board.

There are different techniques in implementing visual recognition and motion detection with smart systems but the high cost and complicated calibration of these systems make them impractical. The goal was to create a system that is simple, inexpensive and applicable to multiple applications that will allow the …

Using Smartphones For Indoor Navigation, Benjamin Thomas Loulier

Purdue Polytechnic Masters Theses

This directed projet is about the use of smartphones for indoor navigation.

Nowadays, indoor navigation is a real challenge, we are all familiar with the multiple applications of GPS based navigation but all these applications cannot be transfered in an indoor environment as we cannot receive a GPS signal inside.

The document is composed of three different parts related to indoor navigation using smartphones. The first part presents an inertial positioning system for pedestrians walking in an indoor environment, this system is implemented on an iPhone 4. In the second part we introduce a positioning system using RFID tags scattered …

Efficient Channel Allocation And Medium Access Organization Algorithms For Vehicular Networking, Zaydoun Yahya Rawashdeh

Wayne State University Dissertations

Due to the limited bandwidth available for Vehicular Ad-hoc Networks (VANETs), organizing the wireless channel access to efficiently use the bandwidth is one of the main challenges in VANET. In this dissertation, we focus on channel allocation and media access organization for Vehicle-to-Roadside Units (V2R) and Vehicle-to-Vehicle (V2V) communications. An efficient channel allocation algorithm for Roadside Unit (RSU) access is proposed. The goal of the algorithm is to increase system throughput by admitting more tasks (vehicles) and at the same time reduce the risk of the admitted tasks. The algorithm admits the new requests only when their requirements can be …

Development Of Load Balancing Algorithm Based On Analysis Of Multi-Core Architecture On Beowulf Cluster, Damian Valles

Open Access Theses & Dissertations

In this work, analysis, and modeling were employed to improve the Linux Scheduler for HPC use. The performance throughput of a single compute-node of the 23 node Beowulf cluster, Virgo 2.0, was analyzed to find bottlenecks and limitations that affected performance in the processing hardware where each compute-node consisted of two quad-core processors with eight gigabytes of memory. The analysis was performed using the High Performance Linpack (HPL) benchmark.

In addition, the processing hardware of the compute-node was modeled using an Instruction per Cycle (IPC) metric that was estimated using linear regression. Modeling data was obtained by using the Tuning …

Utepcam: A Scalable Wireless Vision Sensor Architecture For Computational, Power And Bandwidth Constrained Scenarios, Ricardo Zepeda

Open Access Theses & Dissertations

UTEPcam is a low cost and power vision sensor node system. UTEPcam is composed of an Atmel atmega32 8-bit microcontroller, a CY7C09099V static RAM chip, an OV6620 CMOS image sensor, a XBEE transceiver and a SD Flash memory card, and four logic gates. UTEPcam's simple yet efficiently architecture enables it to capture video at one frame per second. At its absolute highest, it is estimated that UTEPcam consumes only 1.321 Amps. When in standby, UTEPcam consumes 21 microamps. Furthermore, UTEPcam's program takes up only 1Kbyte of memory space.

UTEPcam's CPU, a simple 8-bit MCU, is unlike most vision sensor node …

Formation Of Graphene Sheets Through Laser Exfoliation Of Highly Ordered Pyrolytic Graphite, Min Qian, Yun-Shen Zhou, Yang Gao, Jong Bok Park, Tao Feng, Su Mei Huang, Zhuo Sun, Lan Jiang, Yongfeng Lu

Department of Electrical and Computer Engineering: Faculty Publications

Freestanding two-dimensional (2D) few-layer graphene was formed through laser exfoliation of highly ordered pyrolytic graphite, using a pulsed neodymium-doped yttrium aluminum garnet (Nd:YAG) laser. Graphene sheets of several nanometers in thickness and micrometers in size were obtained. The laser exfoliation process was investigated at different laser fluences and distances between target and substrate. Three different phases, amorphous carbon, few-layer graphene sheets, and thin graphite films, were obtained as the laser fluence increased. This study reveals an existing route of forming freestanding 2D nanostructures through laser exfoliation.

Terahertz Optical-Hall Effect Characterization Of Two-Dimensional Electron Gas Properties In Algan/Gan High Electron Mobility Transistor Structures, S. Schöche, Junxia Shi, A. Boosalis, P. Kühne, C. M. Herzinger, John A. Woollam, W. J. Schaff, L. F. Eastman, M. Schubert, Tino Hofmann

Department of Electrical and Computer Engineering: Faculty Publications

The free-charge carrier mobility, sheet density, and effective mass of a two-dimensional electron gas are exemplarily determined in the spectral range from 640 GHz to 1 THz in a AlGaN/GaN heterostructure using the optical-Hall effect at room temperature. Complementary midinfrared spectroscopic ellipsometry measurements are performed for analysis of heterostructure constituents layer thickness, phonon mode, and free-charge carrier parameters. The electron effective mass is determined to be (0.22 ± 0.04)m₀. The high-frequency sheet density and carrier mobility parameters are in good agreement with results from dc electrical Hall effect measurements, indicative for frequency-independent carrier scattering mechanisms of the …

Reprogrammed Transcriptome In Rhesus-Bovine Interspecies Somatic Cell Nuclear Transfer Embryos, Kai Wang, Hasan H. Otu, Ying Chen, Young Lee, Keith Latham, Jose B. Cibelli

Department of Electrical and Computer Engineering: Faculty Publications

Background: Global activation of the embryonic genome (EGA), one of the most critical steps in early mammalian embryo development, is recognized as the time when interspecies somatic cell nuclear transfer (iSCNT) embryos fail to thrive.

Methodology/Principal Findings: In this study, we analyzed the EGA-related transcriptome of rhesus-bovine iSCNT 8- to 16- cell embryos and dissected the reprogramming process in terms of embryonic gene activation, somatic gene silencing, and maternal RNA degradation. Compared with fibroblast donor cells, two thousand and seven genes were activated in iSCNT embryos, one quarter of them reaching expression levels comparable to those found in in vitro …

A Study On Influence Of Borax To Polyester Insulators, Aysel Ersoy, Ayten Kuntman

Turkish Journal of Electrical Engineering and Computer Sciences

In this study the effect of borax on polyester insulators is investigated by evaluating the tracking and erosion resistance using the inclined plane test. The test procedure follows the ASTM D2303 standard. During the test, 50 Hz current was acquired from the ground electrode allowing a sampling rate of 48000 samples per second. The effect of borax concentration on the glass transition and the degradation temperature is studied by employing differential scanning calorimetry (DSC) analysis. The addition of borax to the unsaturated polyester resulted in an increase in the glass transition temperature, while the addition of 0.5% of borax by …

Design Of Cdba-Based Active Polyphase Filter For Low-If Receiver Applications, Mehmet Sağbaş

Turkish Journal of Electrical Engineering and Computer Sciences

A novel first-order active-RC polyphase filter section, using current differencing buffered amplifiers (CDBAs), is presented. The section uses 6 resistors, 2 capacitors, and 2 CDBAs. The transfer function of the proposed section has a single pole and optionally a single zero. Increasing the number of cascading sections, any higher order polyphase filter can be realized. This paper also introduces the leakage caused by element deviation and the effects of the amplifier in nonideal cases. Furthermore, nonideal performances of the proposed filter section are tested with PSpice simulations.

A Novel Expression For Resonant Length Obtained By Using Artificial Bee Colony Algorithm In Calculating Resonant Frequency Of C-Shaped Compact Microstrip Antennas, Ali̇ Akdağli, Mustafa Berkan Bi̇çer, Seda Ermi̇ş

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a novel and simple expression for resonant length to calculate the resonant frequency of C-shaped compact microstrip antennas operating on UHF band applications. C-shaped compact microstrip antennas with different physical dimensions and electrical parameters were simulated by means of a software package that employs the method of finite difference time domain. With the aid of the artificial bee colony algorithm, an expression for the resonant length depending on physical dimensions was constructed by using simulation data. The resonant length expression provided less than 1.6% error on average over the simulated 144 antennas. A comparison between the results …

Ellipsoid Based L_2 Controller Design For Lpv Systems With Saturating Actuators, İbrahi̇m Beklan Küçükdemi̇ral, Levent Ucun, Yavuz Eren, Haluk Görgün, Gali̇p Cansever

Turkish Journal of Electrical Engineering and Computer Sciences

This paper addresses the L_2 gain control problem for disturbance attenuation in Linear Parameter Varying (LPV) Systems having saturating actuators when the system is subjected to L_2 disturbances. In the presented method, saturating actuator is expressed analytically with a convex hull of some linear feedback which let us construct L_2 control problem via Linear Matrix Inequalities (LMIs) which are obtained by some ellipsoids. It is shown that the stability and disturbance rejection capabilities of the control system are all measured by means of these nested ellipsoids where the inner ellipsoid covers the initial conditions for states whereas the outer ellipsoid …

Model Predictive Controller Design Of Hydrocracker Reactors, Di̇la Gökçe

Turkish Journal of Electrical Engineering and Computer Sciences

This study summarizes the design of a Model Predictive Controller (MPC) in Tüpraş, İzmit Refinery Hydrocracker Unit Reactors. Hydrocracking process, in which heavy vacuum gasoil is converted into lighter and valuable products at high temperature and pressure is described briefly. Controller design description, identification and modeling studies are examined and the model variables are presented. WABT (Weighted Average Bed Temperature) equalization and conversion increase are simulated, results are discussed.

Design And Implementation Of A Voice-Controlled Prosthetic Hand, Musa Hakan Asyali, Mustafa Yilmaz, Mahmut Tokmakçi, Kanber Sedef, Beki̇r Hakan Aksebzeci̇, Rohin Mittal

Turkish Journal of Electrical Engineering and Computer Sciences

Current hand prostheses are mostly driven by electromyography (EMG) signal, and existing experiments have proved that multichannel EMG signal controls are not suitable due to early fatigue problems and high effort requirements to perform even simple activities. Therefore, in this study we present a new voice-controlled active hand prosthesis to perform several basic tasks. We first designed a novel multifingered prosthetic hand with the ability of picking up and releasing objects. The prosthetic hand employs 3 DC motors and gears to transfer motion to the linked iparts of the fingers. We used flexible thin-film resistive force sensors at the fingertips …

Papr Reduction Using Artificial Bee Colony Algorithm In Ofdm Systems, Necmi̇ Taşpinar, Dervi̇ş Karaboğa, Mahmut Yildirim, Bahri̇ye Akay

Turkish Journal of Electrical Engineering and Computer Sciences

Partial transmit sequence (PTS) is an attractive scheme for peak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM) systems, but its high computational complexity to find optimum phase factors is the main drawback. In this paper, we propose PTS based on an artificial bee colony (ABC) algorithm (ABC-PTS) for reducing the computational complexity of the PTS in the OFDM system. The ABC-PTS was compared to conventional PTS using a random search strategy (RS-PTS) and optimum PTS. In addition, the bit error rate (BER) performance of the ABC-PTS was shown when a high power amplifier (HPA) was used for …

Stray Magnetic Field Distributed Around A Pmsm, Ali̇ Ahmed Adam, Kayhan Gülez, Seli̇m Köroğlu

Turkish Journal of Electrical Engineering and Computer Sciences

In this work, the low frequency electromagnetic emission from permanent magnet synchronous motors is studied. The main objective is to provide a safety region for humans in the vicinity of these motors, especially as these motors are now being used widely in inhabited areas, where high flux densities are expected. In this study, a new proposed equivalent magnetic circuit is used to estimate the stray fields at the surface of the motor. The analysis showed that the emission of the stray field in the radial direction depends on the permeability of the stator body. Low values of permeability may result …

Adaptive Wiener-Turbo Systems With Jpeg & Bit Plane Compressions In Image Transmission, Ersi̇n Göse

Turkish Journal of Electrical Engineering and Computer Sciences

In recent years, for transmission of 2D colored images over the fading channels, a new scheme has been denoted as ``adaptive Wiener-turbo systems with JPEG & bit plane compressions'' (AW-TSwJBC). In this paper, the performance of AW-TSwJBC is introduced over Rician and Rayleigh fading channels. We benefited from the neighborhood relation of pixels for each color plane by using a new iterative block, the ``adaptive Wiener-turbo'' scheme, which employs a turbo decoder, JPEG encoder/decoders, and adaptive Wiener filtering. In our approach, we could also alter compression ratios due to the importance of the image to be transferred. Based on the …

New Srco With Explicit Current-Mode Output Using Two Ccs And Grounded Capacitors, D R. Bhaskar, Kasim K. Abdalla, Raj Senani

Turkish Journal of Electrical Engineering and Computer Sciences

A new Grounded-Capacitor Single Resistance Controlled Sinusoidal Oscillator (SRCO) with explicit current output using two Current Conveyors (CCs) and five passive elements is presented. The proposed circuit offers (i) independent control of condition of oscillation and frequency of oscillation, (ii) low active and passive sensitivities, (iii) use of both the grounded capacitors (suitable for IC implementation) and (iv) reasonably good frequency stability. The workability of the proposed configuration has been confirmed by the PSPICE simulations.

Imitation Of Basic Hand Preshapes By Fluid Based Method: Fluidics Formation Control, Umut Ti̇lki̇, İsmet Erkmen, Aydan Müşerref Erkmen

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a new approach is developed, avoiding the correspondence problem caused by the difference in embodiment between imitator and demonstrator in imitation learning. In our work, the imitator is a fluidic system of dynamics totally different than the imitatee, which is a human performing hand gestures. The fluidic system is composed of fluid particles, which are used for the discretization of the problem domain. In this work, we demonstrate the fluidics formation control so as to imitate by observation basic hand preshaping features. Our fluidic formation control is based on setting suitable parameters of Smoothed Particle Hydrodynamics (SPH), …