Computer Engineering Commons^™

Performance Comparison Of Phase Change Materials And Metal-Insulator Transition Materials For Direct Current And Radio Frequency Switching Applications, Protap Mahanta, Mohiuddin Munna, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Advanced understanding of the physics makes phase change materials (PCM) and metal-insulator transition (MIT) materials great candidates for direct current (DC) and radio frequency (RF) switching applications. In the literature, germanium telluride (GeTe), a PCM, and vanadium dioxide (VO₂), an MIT material have been widely investigated for DC and RF switching applications due to their remarkable contrast in their OFF/ON state resistivity values. In this review, innovations in design, fabrication, and characterization associated with these PCM and MIT material-based RF switches, have been highlighted and critically reviewed from the early stage to the most recent works. We initially …

Genetic Algorithm Amplifier Biasing System (Gaabs): Genetic Algorithm For Biasing On Differential Analog Amplifiers, Sean Whalen

Computer Engineering

Genetic Algorithm Amplifier Biasing System (GAABS) - Senior Project Analysis

Summary of Functional Requirements

This project integrates LTSpice with a python script that runs a genetic algorithm to bias a differential amplifier. The system biases the amplifier with 2 different voltages, the base voltage for the PNP BJTs of the active loads and a voltage controlling the current of the current sink. The project runs via a python script, gets data from LTSpice’s command line call, and iteratively runs until the system is biased to achieve the greatest gain on an arbitrary input voltage.

Primary Constraints

Some of the main …

Portable High-Definition Audio Spectrum Analyzer, Alex Zahn, Jamie Corr

Electrical Engineering

The Portable High-definition Audio Spectrum Analyzer (PHASA) allows the user to visualize the audio frequency spectrum of an incoming line-level stereo audio signal. Upon pressing the touch screen spectrum graph, the PHASA displays the corresponding frequency and volume levels as well as crosshairs at the touched location. The PHASA features multiple left/right channel display modes— Left channel only, right channel only, both channels simultaneously, and the average between the two channels. The PHASA features multiple resolution display modes (standard-resolution and high-resolution) and multiple dynamics display modes (standard dynamics, averaging, and peak/hold). The PHASA accepts input audio via a 1/4" TRS …

Microgrid Protection Student Laboratory: Human-Machine Interface And Scada Database, Nathan P. Martinez

Electrical Engineering

The electric utility system, a ubiquitous and fundamental component of modern life, has changed more in the last 20 years than the last 100. With more homes and businesses installing distributed energy resources (DERs) such as solar panels, battery storage, and other intermittent sources, massive changes need to take place in the electric transmission and distribution systems. Engineers must develop a new skill set for a modern utility industry. This project summarizes a component for a new laboratory class aimed at power engineering students at Cal Poly which supports the laboratory through the creation of a human-machine interface (HMI) and …

Data Mining Ancient Script Image Data Using Convolutional Neural Networks, Shruti Daggumati, Peter Revesz

School of Computing: Conference and Workshop Papers

The recent surge in ancient scripts has resulted in huge image libraries of ancient texts. Data mining of the collected images enables the study of the evolution of these ancient scripts. In particular, the origin of the Indus Valley script is highly debated. We use convolutional neural networks to test which Phoenician alphabet letters and Brahmi symbols are closest to the Indus Valley script symbols. Surprisingly, our analysis shows that overall the Phoenician alphabet is much closer than the Brahmi script to the Indus Valley script symbols.

Analog Sorting Using Pulse Width Modulation, Riley C. Olson

Computer Engineering

As time goes on, computers become more and more powerful. However, as processing time becomes less of a limiting factor for computing tasks, power consumption takes its place for many tasks. This paper proposes and tests a new method for sorting analog signals. This new sorting method converts analog signals into Pulse Width Modulated(PWM) signals of varying duty cycle , which are then sorted by a simple network of combinational logic, and then converted to a normal binary representation. In order to implement this new method, multiple circuits had to be designed and and tested to ensure their functionality and …

Towards Autonomous Localization Of An Underwater Drone, Nathan Sfard

Master's Theses

Autonomous vehicle navigation is a complex and challenging task. Land and aerial vehicles often use highly accurate GPS sensors to localize themselves in their environments. These sensors are ineffective in underwater environments due to signal attenuation. Autonomous underwater vehicles utilize one or more of the following approaches for successful localization and navigation: inertial/dead-reckoning, acoustic signals, and geophysical data. This thesis examines autonomous localization in a simulated environment for an OpenROV Underwater Drone using a Kalman Filter. This filter performs state estimation for a dead reckoning system exhibiting an additive error in location measurements. We evaluate the accuracy of this Kalman …

"Dual Peaks" Analog Distortion Guitar Effects Pedal, Dave Raul Breuer

Computer Engineering

The Dual Peaks distortion pedal is an analog effects pedal for electric guitar that distorts and boosts the guitar signal in order to achieve tonal characteristics often heard in music genres such as blues, rock, hard rock, and metal. Dual Peaks aims to remedy the current distortion pedal design, and provide a new spin not often provided in the majority of pedals. Dual Peaks contains two separate distortion channels which provide the player with a vast array of distortion and overdrive tones at the press of a switch. Also, Dual Peaks has a "noise gate" and 3-band equalizer circuits built …

Collision Avoidance Smartphone, Matt Columbres, Aaron Parisi, Joey Schnecker, Luis Wong

Electrical Engineering

There are many instances in day-to-day life where people cannot or would rather not pay full attention to their surroundings. Walking while preoccupied with a smartphone or walking while blind are excellent examples where technology could be used to make the task of avoiding 2collisions reactive, instead of proactive. A device which monitors a user’s surroundings and notifies the user when a potential collision is detected (and, additionally, notifying them as to where the obstacle is with respect to them) could be used to make walking distracted less of a hazard for the user and those around the user and …

Roborodentia Robot: Treadbot, Stephen C. Schmidt

Computer Science and Software Engineering

This document is a summary of my contest entry to the 2018 Cal Poly Roborodentia competition. It is meant to be a process overview and design outline of the mechanical, electrical, and software components of my robot.

Pressure Ulcer Prevention System, Rey-David Palomares, Ojus Rao

Interdisciplinary Design Senior Theses

Pressure ulcers, also known as bedsores, are a widespread but often understated problem. A pressure ulcer is an injury that develops with constant pressure on an area of skin for a long time. They range from bruises to open wounds to even exposed bone. These injuries especially impact bedridden and elderly hospital inpatients, since these people must depend on nursing staff for mobility.

Pressure ulcers can seem to be a solved problem. Solutions that completely eliminate pressure ulcers do exist. These solutions, however, are too expensive for widespread use, at thousands of dollars per bed. Other solutions, such as relying …

The Design, Building, And Testing Of A Constant On Discreet Jammer For The Ieee 802.15.4/Zigbee Wireless Communication Protocol, Alexandre J. Marette

Master's Theses

As wireless protocols become easier to implement, more products come with wireless connectivity. This latest push for wireless connectivity has left a gap in the development of the security and the reliability of some protocols. These wireless protocols can be used in the growing field of IoT where wireless sensors are used to share information throughout a network. IoT is being implemented in homes, agriculture, manufactory, and in the medical field. Disrupting a wireless device from proper communication could potentially result in production loss, security issues, and bodily harm. The 802.15.4/ZigBee protocol is used in low power, low data rate, …

Developing, Evaluating, And Demonstrating An Open Source Gateway And Mobile Application For The Smartfarm Decision Support System, Caleb D. Fink

Master's Theses

The purpose of this research is to design, develop, evaluate, and demonstrate an open source gateway and mobile application for the SmartFarm open source decision support system to improve agricultural stewardship, environmental conservation, and provide farmers with a system that they own. There are very limited options for an open source gateway for collecting data on the farm. The options available are: expensive, require professional maintenance, are not portable between systems, improvements are made only by the manufacturer, limited in customization options, difficult to operate, and data is owned by the company rather than the farmer. The gateway is designed …

Arm Mke1xf Mcu Replatform, Nathan Hong, Derek Lung, Japsimran Singh, Bevin Tang

Computer Engineering

After Cal Poly Racing’s electrical team began to hit the technical limits of the ADC and other I/O features of the current 8-bit Atmel AT90 microcontroller unit, it became clear that an upgrade was due. This replatforming project takes the functionalities of the old, 8-bit architecture, and aims to provide a 32-bit version using the ARM MKE1xF MCU. With the idea of having a working PCB as a stretch goal, the scope of the library development was limited to enable base functionality. Thus, the only libraries developed were for the Timer, ADC, SPI, UART, and CAN. Additionally, this document discusses …

Lionfish Detection System, Carmelo Furlan, Andrew Boniface

Computer Engineering

Deep neural networks have proven to be an effective method in classification of images. The ability to recognize objects has opened the door for many new systems which use image classification to solve challenging problems where conventional image classification would be inadequate. We trained a large, deep convolutional neural network to identify lionfish from other species that might be found in the same habitats. Google’s Inception framework served as a powerful platform for our fish recognition system. By using transfer learning, we were able to obtain exceptional results for the classification of different species of fish. The convolutional neural network …

The Human Keyboard, Derek Char, Thomas Chung, Alexander Mckee, Allen Pai

Interdisciplinary Design Senior Theses

Most products that implement features for user interactions utilize buttons or switches for the user to command to select actions to perform. Such designs are typically controlled with direct motions, such as touch or voice and are seldom designed in consideration of those unable to utilize direct control. In this project, we designed technology that reads naturally occuring biosignals from the body, which then can be apply those signals with any interface. For our specific application in this project, we decided to implement a keyboard. Instead of teaching the fingers how to type on a mechanical keyboard, the body can …

Composite Bending-Dominated Hollow Nanolattices: A Stiff, Cyclable Mechanical Metamaterial, Biwei Deng, Rong Xu, Kejie Zhao, Yongfeng Lu, Sabyasachi Ganguli, Gary J. Cheng

Department of Electrical and Computer Engineering: Faculty Publications

Manufacturing ultralight and mechanical reliable materials has been a long-time challenge. Ceramicbased mechanical metamaterials provide significant opportunities to reverse their brittle nature and unstable mechanical properties and have great potential as strong, ultralight, and ultrastiff materials. However, the failure of ceramics nanolattice and degradation of strength/modulus with decreasing density are caused by buckling of the struts and failure of the nodes within the nanolattices, especially during cyclic loading. Here, we explore a new class of 3D ceramic-based metamaterials with a high strength–density ratio, stiffness, recoverability, cyclability, and optimal scaling factor. Deformation mode of the fabricated nanolattices has been engineered through …

Vehicle Pseudonym Association Attack Model, Pierson Yieh

Master's Theses

With recent advances in technology, Vehicular Ad-hoc Networks (VANETs) have grown in application. One of these areas of application is Vehicle Safety Communication (VSC) technology. VSC technology allows for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications that enhance vehicle safety and driving experience. However, these newly developing technologies bring with them a concern for the vehicular privacy of drivers. Vehicles already employ the use of pseudonyms, unique identifiers used with signal messages for a limited period of time, to prevent long term tracking. But can attackers still attack vehicular privacy even when vehicles employ a pseudonym change strategy? The major contribution …

Artificial Neural Network-Based Robotic Control, Justin Ng

Master's Theses

Artificial neural networks (ANNs) are highly-capable alternatives to traditional problem solving schemes due to their ability to solve non-linear systems with a nonalgorithmic approach. The applications of ANNs range from process control to pattern recognition and, with increasing importance, robotics. This paper demonstrates continuous control of a robot using the deep deterministic policy gradients (DDPG) algorithm, an actor-critic reinforcement learning strategy, originally conceived by Google DeepMind. After training, the robot performs controlled locomotion within an enclosed area. The paper also details the robot design process and explores the challenges of implementation in a real-time system.

Corridor Navigation For Monocular Vision Mobile Robots, Matthew James Ng

Master's Theses

Monocular vision robots use a single camera to process information about its environment. By analyzing this scene, the robot can determine the best navigation direction. Many modern approaches to robot hallway navigation involve using a plethora of sensors to detect certain features in the environment. This can be laser range finders, inertial measurement units, motor encoders, and cameras.

By combining all these sensors, there is unused data which could be useful for navigation. To draw back and develop a baseline approach, this thesis explores the reliability and capability of solely using a camera for navigation. The basic navigation structure begins …

Automatic Segmentation Of Trees In Dynamic Outdoor Environments, Amy Tabb, Henry P. Medeiros

Electrical and Computer Engineering Faculty Research and Publications

Segmentation in dynamic outdoor environments can be difficult when the illumination levels and other aspects of the scene cannot be controlled. Specifically in orchard and vineyard automation contexts, a background material is often used to shield a camera's field of view from other rows of crops. In this paper, we describe a method that uses superpixels to determine low texture regions of the image that correspond to the background material, and then show how this information can be integrated with the color distribution of the image to compute optimal segmentation parameters to segment objects of interest. Quantitative and qualitative experiments …

Multi-Task Learning Framework For Mining Crowd Intelligence Towards Clinical Treatment, Shweta Yadav, Asif Ekbal, Sriparna Saha, Pushpak Bhattacharyya, Amit Sheth

Publications

In recent past, social media has emerged as an active platform in the context of healthcare and medicine. In this paper, we present a study where medical user’s opinions on health-related issues are analyzed to capture the medical sentiment at a blog level. The medical sentiments can be studied in various facets such as medical condition, treatment, and medication that characterize the overall health status of the user. Considering these facets, we treat analysis of this information as a multi-task classification problem. In this paper, we adopt a novel adversarial learning approach for our multi-task learning framework to learn the …

Do Nir Spectra Collected From Laboratory-Reared Mosquitoes Differ From Those Collected From Wild Mosquitoes?, Masabho Peter Milali, Maggy T. Sikulu-Lord, Samson Sifael Kiware, Floyd E. Dowell, Richard J. Povinelli, George F. Corliss

Electrical and Computer Engineering Faculty Research and Publications

Background

Near infrared spectroscopy (NIRS) is a high throughput technique that measures absorbance of specific wavelengths of light by biological samples and uses this information to classify the age of lab-reared mosquitoes as younger or older than seven days with an average accuracy greater than 80%. For NIRS to estimate ages of wild mosquitoes, a sample of wild mosquitoes with known age in days would be required to train and test the model. Mark-release-recapture is the most reliable method to produce wild-caught mosquitoes of known age in days. However, it is logistically demanding, time inefficient, subject to low recapture rates, …

Fault Identification And Location For Distribution Network With Distributed Generations, Wen Fan, Yuan Liao

Electrical and Computer Engineering Faculty Publications

Power distribution networks with distributed generations may experience faults. It is essential to promptly locate the fault for fast repair and restoration. This paper presents a novel method for identifying the faulted section and accurate location of faults that occur on power distribution grid. Appropriate matrices are set up to represent meter locations on the grid and the topology of the grid. The voltage and current measurements obtained are utilized to decide the fault sections. Then fault location is determined by solving equations that link measurements and fault locations through bus impedance matrix. The method is applicable to both single …

An Analysis Of Lora Low Power Technology And Its Applications, Gomathy Venkata Krishnan

Maseeh Summer Undergraduate Research Experience

The number of Internet of Things (IoT) devices has exponentially increased in the last decade. With the increase in these devices, there is a necessity to effectively connect and control these devices remotely. Cellular technologies cannot handle this demand since they are not cost effective and easy to deploy. This is where LoRa technology comes handy. LoRa is long-range, low-power, low cost technology that supports internet of things applications. LoRa has many advantages in terms of capacity, mobility, battery lifetime and cost. It uses the unlicensed 915MHz ISM band and can be easily deployed.

This research is focused on setting …

An Exploration Of Software Defined Radio And Gnu Radio Companion For Use In Drone-To-Drone Communication, Amanda K. H. Voegtlin

Maseeh Summer Undergraduate Research Experience

In a world that increasingly relies on automation and intelligent robotics, there is a need for drones to expand their independence and adaptability in navigating their environments. One approach to this problem is the use of wireless communication between units in order to coordinate their sensor data and build real-time maps of the environments they are navigating. However, especially indoors, relying on a fixed transmission tower to provide data to the units faces connectivity challenges.

The purpose of this research was to determine the fitness of an on-drone assembly that uses the the NI B200mini software-defined radio board and Gnu …

Improvement Of 802.11 Protocol On Fully Programmable Wireless Radio, Eunji Lee

Maseeh Summer Undergraduate Research Experience

The growth in the number of connected device usage has led to a rapidly increased data traffic on wireless network and the demand for access to high speed and stable Internet connection is becoming more prominent. However, current off the shelf wireless cards are not programmable or observable across layers of the standard protocol stack, which leads to poor practical performance. Thus, Wireless Open Access Research Platform (WARP), a scalable wireless platform providing programmable functionality at every layer of the network stack, has been used for the real-time implementation and improvement of 802.11 protocol.

Fiber Optic Sensor And Methods For Highly-Sensitive Detection Of Strain In Large Frequency Range, Ming Han

Department of Electrical and Computer Engineering: Faculty Publications

An in-line fiber-optic sensing element, a system, and methods for detecting strain using a fiber optic sensor are described that include using at least two chirped grating structures. In an implementation, an in-line fiber-optic sensing element that employs example techniques in accordance with the present disclosure in includes an optically transmissive fiber including a core and an outer layer; a Fabry-Perot cavity defined by a portion of the optically transmissive fiber and two chirped fiber-Bragg grating structures, where the two chirped grating structures are separated and are configured to reflect light.

Decco: Deep-Learning Enabled Coverage And Capacity Optimization For Massive Mimo Systems, Yang Yang, Yang Li, Kai Li, Shuang Zhao, Rui Chen, Jun Wang, Song Ci

Department of Electrical and Computer Engineering: Faculty Publications

System capacity and service coverage are the most critical performance metrics in cellular wireless communication networks. Usually, system capacity enhancements are at the expense of service coverage degradations, and vice versa. This capacity-coverage tradeoff and the associated joint optimization problem becomes very challenging in massive multiple-input multiple-output (MIMO) wireless systems, due to a large amount of antenna tilt values to be configured and very sophisticated inter-cell interference conditions, under massive antenna scenarios. This paper proposes a novel approach, namely group alignment of user signal strength (GAUSS), to efficiently support the user scheduling for the massive MIMO system, and thus serve …

Design Of A Distributed Real-Time E-Health Cyber Ecosystem With Collective Actions: Diagnosis, Dynamic Queueing, And Decision Making, Yanlin Zhou

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, we develop a framework for E-health Cyber Ecosystems, and look into different involved actors. The three interested parties in the ecosystem including patients, doctors, and healthcare providers are discussed in 3 different phases. In Phase 1, machine-learning based modeling and simulation analysis is performed to remotely predict a patient's risk level of having heart diseases in real time. In Phase 2, an online dynamic queueing model is devised to pair doctors with patients having high risk levels (diagnosed in Phase 1) to confirm the risk, and provide help. In Phase 3, a decision making paradigm is proposed …