Computer Engineering Commons^™

Advanced Day-Ahead Scheduling Of Hvac Demand Response Control Using Novel Strategy Of Q-Learning, Model Predictive Control, And Input Convex Neural Networks, Rahman Heidarykiany, Cristinel Ababei

Electrical and Computer Engineering Faculty Research and Publications

In this paper, we present a Q-Learning optimization algorithm for smart home HVAC systems. The proposed algorithm combines new convex deep neural network models with model predictive control (MPC) techniques. More specifically, new input convex long short-term memory (ICLSTM) models are employed to predict dynamic states in an MPC optimal control technique integrated within a Q-Learning reinforcement learning (RL) algorithm to further improve the learned temporal behaviors of nonlinear HVAC systems. As a novel RL approach, the proposed algorithm generates day-ahead HVAC demand response (DR) signals in smart homes that optimally reduce and/or shift peak energy usage, reduce electricity costs, …

Understanding The Breadth And Impact Of The Ias [President’S Message], Ayman El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

No abstract provided.

Optimization-Based Distributed Controller For Multi-Agents System In Microgrid Secondary Control, Fahad S. Alshammari, Ayman El-Refaie, Saleh Alyahya, Sheroz Khan

Electrical and Computer Engineering Faculty Research and Publications

Micro-grids function to connect to power system power produced by the renewable energy resources. In islanded micro-grids, grid-forming units collaborate to maintain the micro-grids voltage and frequency by utilizing droop control technique that includes primary, secondary and tertiary levels. Secondary control intervenes to improve power sharing and restore voltage and frequency to their nominal levels. However, the conventional droop control applied to a grid with mismatched line parameters experiences a trade-off between reactive power sharing and voltage regulations. This paper applies real-time trajectory tracking convex optimization to ensure by communicating power sharing between units in a consensus topology. The optimization …

Low Cost Additive Manufacturing Of Segmented Stator Composite Polymer Permanent Magnet Dc Motors, Ben Goldberg, Jordan Bailey, Connor Hawkins, Colin Haskins, Razvan Voicu

Symposium of Student Scholars

This study presents a novel approach to the design, manufacture, and optimization of segmented stators for composite construction axial flux permanent magnet DC motors. Traditional axial flux stator manufacturing is both challenging and expensive, creating a bottleneck in rapid prototyping and innovation. To overcome these limitations, the stator is divided into individually fabricated segments using advanced composite polymer materials and low-cost additive manufacturing techniques. This segmentation not only drastically reduces production complexity and cost but also allows for customized coil geometries that maximize the surface area for improved heat dissipation.

A key innovation of our design is the integration of …

Sustainable Smart Farming Device With Leafit Adaptive Growth Technology, Saville Atkins, Anthony Iwejuo, Julian Pitts, Luis Mercado, Rachnicha Rojjhanarittikorn, Sandip Das, Hai Ho

Symposium of Student Scholars

For farmers, gardeners, and horticulture enthusiasts worldwide, one immutable reality is that maintaining a consistent physical presence to care for plants is not always feasible. In addition, different plants have unique needs for watering, nutrients, and environmental conditions to thrive. Failing to meet these specific needs can result in poor plant health, reduced yields, and inefficient resource usage. In this research project, we have designed and developed ‘LeaFit’ – a cutting-edge Internet of Things (IoT) device that offers a sophisticated and sustainable smart farming and gardening solution. Equipped with intelligent soil moisture, ambient temperature, humidity, and light sensors, LeaFit autonomously …

Deep Learning-Based Multi-Class Classification Of Breast Cancer Ultrasound Images Using Convolutional Neural Networks, Andres E. Dewendt Urdaneta

ATU Scholars Symposium

The National Cancer Institute forecasts 2,001,140 cancer diagnoses in 2024, with approximately 600,000 expected deaths. Breast cancer is projected to be the most prevalent, with about 310,000 cases. Early diagnosis is critical to improving outcomes, and various diagnostic technologies, including imaging, biopsies, and blood tests, play a vital role. Image testing methods include X-rays, ultrasounds, magnetic resonance imaging (MRI), and PET scans. Artificial intelligence (AI) has recently significantly improved cancer detection, improving speed, accuracy, and effectiveness. This research project uses a convolution neural network (CNN) to analyze ultrasound breast images, classifying them as benign, malignant, or normal. Our CNN model …

An Empirical Evaluation Of Communication Technologies And Quality Of Delivery Measurement In Networked Microgrids, Ruairí De Fréin, Yasin Emir Kutlu

Articles

Networked microgrids (NMG) are gaining popularity as an example of smartgrids (SG), where power networks are integrated with communication technologies. Communication technologies enable NMGs to be monitored and controlled via communication networks. However, ensuring that communication networks in NMGs satisfy quality of delivery (QoD) metrics such as the round trip time (RTT) of NMG control data is necessary. This paper addresses the communication network types and communication technologies used in NMGs. We present various NMG deployments to demonstrate real-life applicability in different contexts. We develop a real-time NMG testbed using real hardware such as Cisco 4331 Integrated Services Routers (ISR). …

Sustainable Poultry Farming: A Concept Of Iot-Based Poultry Management System For Small-Scale Farmers, Ayodeji Akinsoji Okubanjo, Ignatius Kema Okakwu, Olufemi Peter Alao, Nurudeen Samuel. Lawal, Ayoola Abiola Babalola, Abisola Olayiwola

Al-Bahir

Conventional poultry management techniques are failing to meet increased demand for poultry products as the population continues to grow. As a result, this issue has become a major concern for small-scale farmers, particularly those in low-income areas, in terms of food security. One of the main reasons for this is that the farmers rely on intensive farming methods which are inefficient for automating daily poultry operations. However, intensive farming methods pose major environmental concerns to ecosystems and poultry health. Also, the environmental conditions, welfare, and productivity of poultry operations may be harmed by the global climate crisis and poultry waste …

From Adversarial Attacks To Robust Classifiers - A Study In Social Media Spam Detection - Black Box & White Box, Jonathan Jose Penaloza Rumie

Undergraduate Theses

Adversarial attacks pose a significant threat to the reliability of machine learning-based spam detection systems in social media. This undergraduate thesis, "From Adversarial Attacks to Robust Classifiers: A Study in Social Media Spam Detection – Black Box & White Box," systematically examines the impact of both black-box and white-box adversarial attacks on a range of spam classifiers, including Logistic Regression, Decision Trees, Random Forests, K-Nearest Neighbors, Bagging, Gradient Boosting, and Support Vector Machines. Leveraging a novel dataset derived from Twitter spam messages and enhanced with adversarial perturbations such as synonym replacement and character-level modifications, this study evaluates classifier performance under …

Enhancing Iot Security Using Lightweight Machine Learning Algorithms: A Comprehensive Approach Using Ensemble Learning, Feature Selection, And Federated Transfer Learning, Khawlah Harahsheh

Electrical & Computer Engineering Theses & Dissertations

The rapid expansion of the Internet of Things (IoT) has introduced significant security vulnerabilities due to the resource-constrained nature of IoT devices and their exposure to cyber threats. Traditional security solutions are often infeasible due to the high computational and storage demands they impose. This dissertation presents a lightweight, AI-driven security framework that enhances IoT network resilience by integrating feature selection, ensemble learning, and federated transfer learning while maintaining data privacy and minimizing computational overhead.

The proposed framework consists of three primary components: Feature Selection for Intrusion Detection, which optimizes performance by reducing redundant data and improving detection accuracy with …

Clinical Use Of Sit2stand Ai Application For Kinematic Analysis In Prosthesis Users., Samerial Brown

Posters - 2025

Biomechanical analysis is a tool to evaluate prosthetic and orthotic patient's. These tools offer the clinician capability of understanding the mechanism of injury, gait deviation or prosthesis problem. Video based analysis require expensive hardware, software, and training which sometimes costs $40-100,000.

The recent advent of artificial intelligence (AI) has opened up the possibility of acquiring high speed human motion video analysis using low-cost hardware and open-source machine learning algorithms. Still, free assessments like the Sit2Stand test is a current clinical outcome measure which assesses ability of a patient to stand and sit as fast as possible 5x. The faster the …

Swvl: A Custom Ai-Powered Face Tracking Camera Gimbal, Alexander J. Anderson-Mcleod, Jakub Jerzmanowski, Michael Laitarovsky, Trevor Allison, Jagger Tanner

Senior Theses

In response to the growing demand for smarter, more responsive face tracking cameras in the post-pandemic world, our team designed SWVL, a custom AI-powered face tracking gimbal meant to address the limitations commonly encountered by the commercial models currently on the market. These commercially available gimbals come with several issues, such as frequently losing track of the person in the frame and requiring manual resets, which we sought to fix with our implementation. We designed a system with fully custom hardware and software including a 3D printed dual-axis camera gimbal driven by stepper motors, a control PCB based around an …

On The Provenance Of Software Systems: Automating Software Traceability With Knowledge Graph And Large Language Model Synergy, Tyler Procko

Doctoral Dissertations and Master's Theses

The present dissertation delineates a system that enables those engaged in software development to automatically generate and maintain project life cycle provenance. All projects are implemented and made manifest with the development of artifacts, e.g., papers, code files, etc. Tools exist to accelerate artifact creation, but little focus is paid to the processes that produce them. In terms of Ontology, or, from Ancient Greek, the study of being, the two most basic entities in reality are Continuant and Occurrent, or, roughly, “Artifact” and “Process”. This dissertation posits that for any created artifact, its process of creation, i.e., its life …

Understanding The Breadth And Impact Of The Ias [Presidents Message], Ayman El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

No abstract provided.

Heat-Pipe-Based Thermal Management System Design For A 250 Kw Gan-Based Integrated Modular Motor Drive, Seyed Iman Hosseini Sabzevari, Salar Koushan, Armin Ebrahimian, Towhid Islam Chowdhury, Nathan Weise, Ayman El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

Integrated modular motor drive (IMMD) is an effective approach for realizing high-efficiency, high-power-density, and fault-tolerant electric machines. However, designing an efficient thermal management system (TMS) for the motor drive becomes a challenge, particularly due to space constraints. This article presents the design of a TMS based on 3-mm heat pipes for a 250-kW IMMD intended for aviation applications. The power electronics module is simulated using PLECS software where an electrothermal analysis is conducted. A simplified thermal resistance model of the system is developed to estimate the die junction temperature of gallium nitride (GaN) semiconductors. The performance of the proposed TMS …

Role Of Eye-Tracking Technology And Software Algorithms In Enhancing Adhd Detection And Diagnosis: A Systematic Literature Review, Lauren E. Perkins

Honors College Theses

This systematic literature review explores the role of eye-tracking technology and software algorithms in enhancing the detection and diagnosis of ADHD. ADHD, a neurodevelopmental disorder affecting both children and adults, is traditionally diagnosed through behavioral assessments, which may lack objectivity. Recent studies suggest that eye-tracking, specifically focusing on saccades, fixations, and blink rates, offers the potential for more accurate and objective measures of ADHD. The review examines clinical trials, observational studies, and machine learning research to assess the correlation between ADHD and eye movement patterns. Results indicate that individuals with ADHD exhibit distinct eye movement patterns, which can be quantified …

Conversational Open-Domain Question Answering For Resource-Constrained Languages, Emrah Budur, Tunga Güngör

Turkish Journal of Electrical Engineering and Computer Sciences

The growing interest in Conversational AI has led to the development of Conversational OpenQA systems as a crucial step for meeting users' information needs in real world scenarios. Conversational OpenQA systems enhance standard OpenQA performance by leveraging conversation history of the users. However, building effective Conversational OpenQA systems requires large-scale Conversational OpenQA datasets, often limited to the English language, hindering progress in low-resource languages. We present a robust Conversational OpenQA system enhanced by conversational context, designed for languages with limited resources and exemplified in our case study for Turkish. To address data limitations in a cost-effective way, we repurpose existing …

A Case Study Of Gray-Box Fuzzing With Byte- And Tree-Level Mutation Strategies In Xml-Based Applications For Exposing Security Vulnerabilities, Şerafetti̇n Şentürk, Vahi̇d Garousi, Nejat Yumuşak

Turkish Journal of Electrical Engineering and Computer Sciences

Fuzzing is an automated process for detecting crashes and vulnerabilities in software system and it is classified as grammar- or mutation-based in terms of input generation. While the grammar-based fuzzing generates inputs from a specification and takes highly-structured inputs, mutation-based fuzzing generates inputs by modifying input files and abstract syntax trees randomly. There are not many case studies comparing the crash detection capabilities in the scope of mutation-based fuzzing. To add to the body of empirical evidence in this area, this case study compares fuzzing with different mutation strategies to evaluate their effectiveness in three aspects: fault detection effectiveness, fault …

Optimizing Parameters For Efficient Computation With Fully Homomorphic Encryption Schemes, Cavi̇dan Yakupoğlu Karaağaç, Kurt Rohloff

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, we aim to provide a parameter selection approach for the BFVrns scheme, one of the prominent fully homomorphic encryption (FHE) schemes. Selecting parameters for lattice-based FHE schemes poses a practical challenge for both experts and nonexperts. To solve this problem, we introduce a hybrid approach that combines theoretical approach with experimental analysis. First, we employ regression analysis to examine the impact of parameters on both performance and security. The varying behavior of FHE parameters in terms of performance, security, and ciphertext expansion factor (CEF) makes parameter selection more challenging. To address this issue, we employ a multi-objective …

Decomposition Lstm With Dual Multi-Head Self-Attention For Wind Turbine Drivetrain State Forecasting, Haikun Jia, Huini Sun, Shuang Bai

Turkish Journal of Electrical Engineering and Computer Sciences

Due to the clean and renewable nature of wind energy, accurate prediction of rotor loads and operating states for wind turbine units has become of paramount importance. Currently, traditional methods relying on expert analysis combined with instrument testing for qualitative reasoning are both time-consuming and labor-intensive, and their accuracy guarantees are limited. In response to wind farm data entailing the interweaving of data from multiple sources and the diverse interrelations across various features and time steps, this study introduces a method for predicting rotor loads and operating states. Initially, we employ an iterative multi-scale seasonal-trend decomposition block to capture latent …

Fuzzy-Virtual Inertia Control To Improve The Frequency Response Of Multi-Area Power Systems, Nourelhouda Djaraf, Yacine Daili, Abderrahim Zemmit, Abdelghani Harrag

Turkish Journal of Electrical Engineering and Computer Sciences

Virtual inertia control (VIC) is essential for power systems dominated by electronic devices to compensate for the lack of inertia and ensure frequency regulation. However, most existing VICs often focus solely on optimizing the virtual inertia parameter to adapt to the high penetration of renewable energy sources (RESs) without considering the damping factor. This oversight can lead to significant fluctuations and power mismatches, especially in interconnected systems where the coordination between MGs is sensitive and essential, and there is a risk of propagation of deviations between MGs, which makes the control more complex. To address these issues, this paper presents …

Multikernel Embedded Fusion Unet (Mkef-Unet): A Robust Deep Learning Approach For Accurate Segmentation Of Chagas Parasites, Preet Kumar, Carlos Brito-Loeza, Lavdie Rada

Turkish Journal of Electrical Engineering and Computer Sciences

This paper introduces a novel approach for segmenting Chagas parasites on stained blood smear samples from mice during the acute phase of infection with Trypanosoma cruzi utilizing a U-Net-based deep learning model named multikernel embedded fusion UNet (MKEF-UNet). Our proposed model incorporates DenseNet-121 for feature extraction, a classifier module for predicting parasite information, and a segmentation decoder with multiscale feature fusion to generate precise segmentation results. Notably, the integration of the embedded vector module, multikernel convolutions with dilations, and advanced data augmentation techniques significantly enhance the model’s robustness and generalization capabilities. In extensive experiments on the Chagas dataset, MKEF-UNet achieves …

Enhancing Spatial-Temporal Video Prediction With Ts-Vq-Vae: A Novel Encoder-Processor-Decoder Approach, Mei Feng, Fan Li

Turkish Journal of Electrical Engineering and Computer Sciences

Video prediction is a significant and actively researched area within the data science community. Its primary objective is to generate future video frames based on historical frames, finding applications in diverse domains such as human motion prediction, climate change analysis, and traffic flow forecasting. Traditional methods combine Convolutional Neural Networks (CNNs) and Recurrent Neural Networks (RNNs) to capture complex correlations in spatial-temporal signals. Recent methods improve video prediction accuracy by introducing external information such as optical flow, semantic maps, and human pose data. However, these methods have limitations, such as not fully exploring the intermediate states of learning representations, overlooking …

Emg-Based Intraoperative Neuromonitoring Using Advanced Machine Learning Approaches, Abdalla Nabil Elsharkawy, Nourhan Zayed

Mechanical Engineering

Intraoperative neuromonitoring (IONM) plays a critical role in minimizing nerve damage during surgeries by providing real-time feedback on neural integrity. This study evaluated models associated with deep learning and machine learning models for electromyography classification of signal during intraoperative neuromonitoring (IONM). The CNNLSTM model achieved the highest accuracy (85.2%), outperforming traditional models like KNN (53%), RF (62%), and CNN (76%). This demonstrates the degree to which the CNN-LSTM model can gain insight into temporal and spatial dependencies throughout the EMG signals, which makes it optimal for real-time classification in IONM applications. This implies that deep learning techniques can improve surgical …

Neurophisology Biosignals Of Cognitive Training Classification In Virtual Reality Environment Using Deep Learning Model, Nourhan Zayed, Mohamed Reda

Mechanical Engineering

This research investigates the potential of neurophysiological biosignals fusion, such as electroencephalogram (EEG) and Eye Tracking signals (ET), to classify cognitive states during virtual reality (VR) training, specifically for the rehabilitation of neurodegenerative diseases. By analyzing EEG data collected from participants engaged in VR-based cognitive exercises, we aim to identify patterns associated with different cognitive states and develop a robust classification system. A Convolutional Neural Network (CNN) model was developed to predict task performance utilizing neurophysiological inputs in an immersive world. This system could be used to monitor cognitive function, assess treatment efficacy, and provide real-time feedback to adapt the …

Harmonicthreads – An Interface That Supports Accessibility In Musical Interaction, Ellie Nguyen, Miyuki Weldon, Franceli L. Cibrian

Engineering Faculty Articles and Research

Traditional musical instruments often can create boundaries due to their cost, training, mobility, and cognitive requirements, making musical expression inaccessible. To address this challenge, we developed HarmonicThreads, a novel pervasive computing interface consisting of a responsive, flexible fabric. HarmonicThreads provides a tactile and auditory experience, allowing users to easily create and control sounds. Using embedded sensors and real-time processing, HarmonicThreads interprets the user's natural movements and interactions to create adaptable musical outputs. This enables context-aware musical interaction, demonstrating the potential of pervasive interfaces in reducing barriers and making musical expression more accessible.

Development And Validation Of An Artificial Intelligence System For Surgical Case Length Prediction, Adhitya Ramamurthi, Bhabishya Neupane, Priya Deshpande, Ryan Hanson, Kellie R. Brown, Kathleen K. Christians, Douglas B. Evans, Anai N. Kothari

Electrical and Computer Engineering Faculty Research and Publications

Background

Accurate case length estimation is a vital part of optimizing operating room use; however, significant inaccuracies exist with current solutions. The purpose of this study was to develop and validate an artificial intelligence system for improved surgical case length prediction by applying natural language processing and machine-learning methods.

Methods

All inpatient elective surgical cases longer than 30 minutes completed between 2017 and 2023 at a single, quaternary care hospital were considered. Data were split into training, test, and hold-out validation for model training and testing. Linear regression, CategoricalBoost, and feed-forward neural network each were trained and used embeddings created …

Industry Applications Society And Conferences [President’S Message], Ayman El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

No abstract provided.

Industry Applications Society And Conferences [Presidents Message], Ayman El-Refaie

Electrical and Computer Engineering Faculty Research and Publications

No abstract provided.

Modeling Of Analog-To-Digital Converter In Signal Processing, Ravshan Aliev, A.U. Djalilov

Chemical Technology, Control and Management

This article is devoted to the study of the modeling process of analog-to-digital converters (ADCs) that process signals, one of the main parts of control system elements and devices. As we know, ADCs are an important part of modern control systems. During the research, the main stages of analog signal conversion were analyzed, i.e. discretization, quantization, coding. A classification of analog-to-digital conversion methods was made and the advantages and disadvantages of each were identified. Also, the characteristics and parameters of ADC were studied, their impact on ADCs performance was evaluated, and it was determined that certain characteristics should be taken …