Computer Engineering Commons^™

Amodal Instance Segmentation And Multi-Object Tracking With Deep Pixel Embedding, Yanfeng Liu

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This thesis extends upon the representational output of semantic instance segmentation by explicitly including both visible and occluded parts. A fully convolutional network is trained to produce consistent pixel-level embedding across two layers such that, when clustered, the results convey the full spatial extent and depth ordering of each instance. Results demonstrate that the network can accurately estimate complete masks in the presence of occlusion and outperform leading top-down bounding-box approaches.

The model is further extended to produce consistent pixel-level embeddings across two consecutive image frames from a video to simultaneously perform amodal instance segmentation and multi-object tracking. No post-processing …

Aluminum/Carbon Composites Materials Fabricated By The Powder Metallurgy Process, Amélie Veillère, Hiroki Kurita, Akira Kawasaki, Yongfeng Lu, Jean-Marc Heintz, Jean-François Silvain

Department of Electrical and Computer Engineering: Faculty Publications

Aluminum matrix composites reinforced with carbon fibers or diamond particles have been fabricated by a powder metallurgy process and characterized for thermal management applications. Al/C composite is a nonreactive system (absence of chemical reaction between the metallic matrix and the ceramic reinforcement) due to the presence of an alumina layer on the surface of the aluminum powder particles. In order to achieve fully dense materials and to enhance the thermo-mechanical properties of the Al/C composite materials, a semi-liquid method has been carried out with the addition of a small amount of Al-Si alloys in the Al matrix. Thermal conductivity and …

The Trolley Problem In Virtual Reality, Jungsu Pak, Ariane Guirguis, Nicholas Mirchandani, Scott Cummings, Uri Maoz

Student Scholar Symposium Abstracts and Posters

Would people react to the Trolley problem differently based on the medium? Immersive Virtual Reality Driving Simulator was used to examine participants respond to the trolley problem in a realistic and controlled simulated environment.

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

Bitcoin Price Prediction Using Neural Networks, Vladislav Killiakov

Electrical Engineering

In this project, I will investigate the performance of several major neural network architectures for the task of Bitcoin price prediction. Bitcoin is a cryptocurrency that is recently becoming increasingly more popular, and more widely adopted as a financial instrument. As a result, more efforts have been made in the past several years to model and predict its price. However, to this moment a large portion of work on Bitcoin price modeling was done using statistical or classical machine learning techniques. At the same time, other artificial intelligence based prediction techniques, and specifically neural networks, have not been explored to …

Neural Network Classification Of Brainwave Alpha Signalsin Cognitive Activities, Ahmad Azhari, Adhi Susanto, Andri Pranolo, Yingchi Mao

Knowledge Engineering and Data Science

The signal produced by human brain waves is one unique feature. Signals carry information and are represented in electrical signals generated from the brain in a typical waveform. Human brain wave activity will always be active even when sleeping. Brain waves will produce different characteristics in different individuals. Physical and behavioral characteristics can be identified from patterns of brain wave activity. This study aims to distinguish signals from each individual based on the characteristics of alpha signals from brain waves produced. Brain wave signals are generated by giving several mental perception tasks measured using an Electroencephalogram (EEG). To get different …

Optimisation Of Rice Fertiliser Composition Using Genetic Algorithms, Retno Dewi Anissa, Wayan Firdaus Mahmudy, Agus Wahyu Widodo

Knowledge Engineering and Data Science

There are so many problems with food scarcity. One of them is not too good rice quality. So, an enhancement in rice production through an optimal fertiliser composition. Genetic algorithm is used to optimise the composition for a more affordable price. The process of genetic algorithm is done by using a representation of a real code chromosome. The reproduction process using a one-cut point crossover and random mutation, while for the selection using binary tournament selection process for each chromosome. The test results showed the optimum results are obtained on the size of the population of 10, the crossover rate …

Handwriting Character Recognition Usingvector Quantization Technique, Haviluddin Haviluddin, Rayner Alfred, Ni’Mah Moham, Herman Santoso Pakpahan, Islamiyah Islamiyah, Hario Jati Setyadi

Knowledge Engineering and Data Science

This paper seeks to explore Learning Vector Quantization (LVQ) processing stage to recognize The Buginese Lontara script from Makassar as well as explaining its accuracy. The testing results of LVQ obtained an accuracy degree of 66.66 %. The most optimal variant of network architecture in the recognition process is a variation of learning rate of 0.02, a maximum epoch of 5000 and a hidden layer of 90 neurons which was the result of recognition based on feature 8. Based on these variations, the obtained performance with a mean square error (MSE) of 0.0306 and the time required during the learning …

Comparison Of Indonesian Imports Forecastingby Limited Period Using Sarima Method, Harits Ar Rosyid, Mutyara Whening Aniendya, Heru Wahyu Herwanto

Knowledge Engineering and Data Science

The development of Indonesia's imports fluctuate over years. Inability to anticipate such rapid changes can cause economic slump due to inappropriate policy. For instance, recent years imports in rice led to the extermination of rice reserves. The reason is to maintain the market price of rice in Indonesia. To overcome these changes, forecasting the amount of imports should assist the Government in determining the optimum policy. This can be done by utilizing an algorithm to forecast time series data, in this case the amount of imports in the next few months with a high degree of accuracy. This study uses …

Resource Allocation And Task Scheduling Optimization In Cloud-Based Content Delivery Networks With Edge Computing, Yang Peng

Operations Research and Engineering Management Theses and Dissertations

The extensive growth in adoption of mobile devices pushes global Internet protocol (IP) traffic to grow and content delivery network (CDN) will carry 72 percent of total Internet traffic by 2022, up from 56 percent in 2017. In this praxis, Interconnected Cache Edge (ICE) based on different public cloud infrastructures with multiple edge computing sites is considered to help CDN service providers (SPs) to maximize their operational profit. The problem of resource allocation and performance optimization is studied in order to maximize the cache hit ratio with available CDN capacity.

The considered problem is formulated as a multi-stage stochastic linear …

Pixel-Level Deep Multi-Dimensional Embeddings For Homogeneous Multiple Object Tracking, Mateusz Mittek

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The goal of Multiple Object Tracking (MOT) is to locate multiple objects and keep track of their individual identities and trajectories given a sequence of (video) frames. A popular approach to MOT is tracking by detection consisting of two processing components: detection (identification of objects of interest in individual frames) and data association (connecting data from multiple frames). This work addresses the detection component by introducing a method based on semantic instance segmentation, i.e., assigning labels to all visible pixels such that they are unique among different instances. Modern tracking methods often built around Convolutional Neural Networks (CNNs) and additional, …

Iomt Malware Detection Approaches: Analysis And Research Challenges, Mohammad Wazid, Ashok Kumar Das, Joel J.P.C. Rodrigues, Sachin Shetty, Youngho Park

VMASC Publications

The advancement in Information and Communications Technology (ICT) has changed the entire paradigm of computing. Because of such advancement, we have new types of computing and communication environments, for example, Internet of Things (IoT) that is a collection of smart IoT devices. The Internet of Medical Things (IoMT) is a specific type of IoT communication environment which deals with communication through the smart healthcare (medical) devices. Though IoT communication environment facilitates and supports our day-to-day activities, but at the same time it has also certain drawbacks as it suffers from several security and privacy issues, such as replay, man-in-the-middle, impersonation, …

Ldakm-Eiot: Lightweight Device Authentication And Key Management Mechanism For Edge-Based Iot Deployment, Mohammad Wazid, Ashok Kumar Das, Sachin Shetty, Joel J. P. C. Rodrigues, Youngho Park

VMASC Publications

In recent years, edge computing has emerged as a new concept in the computing paradigm that empowers several future technologies, such as 5G, vehicle-to-vehicle communications, and the Internet of Things (IoT), by providing cloud computing facilities, as well as services to the end users. However, open communication among the entities in an edge based IoT environment makes it vulnerable to various potential attacks that are executed by an adversary. Device authentication is one of the prominent techniques in security that permits an IoT device to authenticate mutually with a cloud server with the help of an edge node. If authentication …

Comparison Of Naïve Bayes Algorithm And Decision Tree C4.5for Hospital Readmission Diabetes Patientsusing Hba1c Measurement, Utomo Pujianto, Asa Luki Setiawan, Harits Ar Rosyid, Ali M. Mohammad Salah

Knowledge Engineering and Data Science

Diabetes is a metabolic disorder disease in which the pancreas does not produce enough insulin or the body cannot use insulin produced effectively. The HbA1c examination, which measures the average glucose level of patients during the last 2-3 months, has become an important step to determine the condition of diabetic patients. Knowledge of the patient's condition can help medical staff to predict the possibility of patient readmissions, namely the occurrence of a patient requiring hospitalization services back at the hospital. The ability to predict patient readmissions will ultimately help the hospital to calculate and manage the quality of patient care. …

Second-Order Fault Tolerant Extended Kalman Filter For Discrete Time Nonlinear Systems, Xin Wang, Edwin E. Yaz

Electrical and Computer Engineering Faculty Research and Publications

As missing sensor data may severely degrade the overall system performance and stability, reliable state estimation is of great importance in modern data-intensive control, computing, and power systems applications. Aiming at providing a more robust and resilient state estimation technique, this paper presents a novel second-order fault-tolerant extended Kalman filter estimation framework for discrete-time stochastic nonlinear systems under sensor failures, bounded observer-gain perturbation, extraneous noise, and external disturbances condition. The failure mechanism of multiple sensors is assumed to be independent of each other with various malfunction rates. The proposed approach is a locally unbiased, minimum estimation error covariance based nonlinear …

Comparison And Design Optimization Of A Five-Phase Flux-Switching Pm Machine For In-Wheel Traction Applications, Hao Chen, Xiangdong Liu, Nabeel Demerdash, Ayman M. El-Refaie, Jing Zhao, Jiangbiao He

Electrical and Computer Engineering Faculty Research and Publications

A comparative study of five-phase outer-rotor flux-switching permanent magnet (FSPM) machines with different topologies for in-wheel traction applications is presented in this paper. Those topologies include double-layer winding, single-layer winding, C-core, and E-core configurations. The electromagnetic performance in the low-speed region, the flux-weakening capability in the high-speed region, and the fault-tolerance capability are all investigated in detail. The results indicate that the E-core FSPM machine has performance advantages. Furthermore, two kinds of E-core FSPM machines with different stator and rotor pole combinations are optimized, respectively. In order to reduce the computational burden during the large-scale optimization process, a mathematical technique …

Comparative Study Of Winding Configurations Of A Five-Phase Flux-Switching Pm Machine, Hao Chen, Xiangdong Liu, Ayman M. El-Refaie, Jing Zhao, Nabeel Demerdash, Jiangbiao He

Electrical and Computer Engineering Faculty Research and Publications

This paper introduces a general method for determination of the most suitable winding configurations for five-phase flux-switching permanent magnet (FSPM) machines, associated with feasible stator/rotor-pole combinations. Consequently, the effect of winding configurations on the performance of a five-phase outer-rotor FSPM machine is thoroughly investigated, including non-overlapping concentrated windings (single-layer, double-layer, and multi-layer) as well as distributed winding. The electromagnetic characteristics in the low-speed region, the flux-weakening capability in the high-speed region, and the fault-tolerant capability under faulty situations are evaluated and compared in detail. This work shows that compared with the conventional single-layer or double-layer concentrated windings, the FSPM machine …

Evaluation And Analysis Of Null Convention Logic Circuits, John Davis Brady

Graduate Theses and Dissertations

Integrated circuit (IC) designers face many challenges in utilizing state-of-the-art technology nodes, such as the increased effects of process variation on timing analysis and heterogeneous multi-die architectures that span across multiple technologies while simultaneously increasing performance and decreasing power consumption. These challenges provide opportunity for utilization of asynchronous design paradigms due to their inherent flexibility and robustness.

While NULL Convention Logic (NCL) has been implemented in a variety of applications, current literature does not fully encompass the intricacies of NCL power performance across a variety of applications, technology nodes, circuit scale, and voltage scaling, thereby preventing further adoption and utilization …

Involuntary Signal-Based Grounding Of Civilian Unmanned Aerial Systems (Uas) In Civilian Airspace, Keith Conley

Master's Theses

This thesis investigates the involuntary signal-based grounding of civilian unmanned aerial systems (UAS) in unauthorized air spaces. The technique proposed here will forcibly land unauthorized UAS in a given area in such a way that the UAS will not be harmed, and the pilot cannot stop the landing. The technique will not involuntarily ground authorized drones which will be determined prior to the landing. Unauthorized airspaces include military bases, university campuses, areas affected by a natural disaster, and stadiums for public events. This thesis proposes an early prototype of a hardware-based signal based involuntary grounding technique to handle the problem …

Security Of The Internet Of Things: Vulnerabilities, Attacks And Countermeasures, Ismail Butun, Houbing Song, Patrik Osterberg

Publications

Wireless Sensor Networks (WSNs) constitute one of the most promising third-millennium technologies and have wide range of applications in our surrounding environment. The reason behind the vast adoption of WSNs in various applications is that they have tremendously appealing features, e.g., low production cost, low installation cost, unattended network operation, autonomous and longtime operation. WSNs have started to merge with the Internet of Things (IoT) through the introduction of Internet access capability in sensor nodes and sensing ability in Internet-connected devices. Thereby, the IoT is providing access to huge amount of data, collected by the WSNs, over the Internet. Hence, …

Water Pipeline Leakage Detection Based On Machine Learning And Wireless Sensor Networks, Yang Liu, Xuehui Ma, Yong Tie, Yinghui Zhang, Jing Gao

Department of Electrical and Computer Engineering: Faculty Publications

The detection of water pipeline leakage is important to ensure that water supply networks can operate safely and conserve water resources. To address the lack of intelligent and the low efficiency of conventional leakage detection methods, this paper designs a leakage detection method based on machine learning and wireless sensor networks (WSNs). The system employs wireless sensors installed on pipelines to collect data and utilizes the 4G network to perform remote data transmission. A leakage triggered networking method is proposed to reduce the wireless sensor network’s energy consumption and prolong the system life cycle effectively. To enhance the precision and …

Machine Current Sensor Fdi Strategy In Pmsms, Haibo Li, Yi Qian, Sohrab Asgarpoor, Hamid Sharif

Department of Electrical and Computer Engineering: Faculty Publications

This work proposes a machine current sensor fault detection and isolation (FDI) strategy in permanent magnet synchronous machines (PMSMs) resilient to multiple faults. The fault detection is performed by comparing the measured and estimated DC link currents. The fault isolation is achieved according to machine phase signal estimation and the corresponding residual examination. Single sensor fault, multiple sensor faults and non-sensor fault are covered by the proposed FDI method. The proposed sensor FDI method is not influenced by machine imbalance, feasible for FDI of both single and multiple machine current sensor faults, and capable of distinguishing between machine current sensor …

An Open-Source Integration Platform For Multiple Peripheral Modules With Kuka Robots, Mahyar Abdeetedal, Mehrdad Kermani Ph.D., P.Eng.

Electrical and Computer Engineering Publications

This paper presents an open-source software interface for the integration of a Kuka robot with peripheral tools and sensors, KUI: Kuka User Interface. KUI is developed based on Kuka Fast Research Interface (FRI) which enables soft real-time control of the robot. Simulink Desktop Real-Time™ or any User Datagram Protocol (UDP) client can send real-time commands to Kuka robot via KUI. In KUI, third-party tools can be added and controlled synchronously with Kuka light-weight robot (LWR). KUI can send the control commands via serial communication to the attached devices. KUI can generate low-level commands using data acquisition (DAQ) boards. This feature …

Artificial Intelligence Empowered Uavs Data Offloading In Mobile Edge Computing, Nicholas Alexander Kemp

Electrical and Computer Engineering ETDs

The advances introduced by Unmanned Aerial Vehicles (UAVs) are manifold and have paved the path for the full integration of UAVs, as intelligent objects, into the Internet of Things (IoT). This paper brings artificial intelligence into the UAVs data offloading process in a multi-server Mobile Edge Computing (MEC) environment, by adopting principles and concepts from game theory and reinforcement learning. Initially, the autonomous MEC server selection for partial data offloading is performed by the UAVs, based on the theory of the stochastic learning automata. A non-cooperative game among the UAVs is then formulated to determine the UAVs' data to be …