Computer Engineering Commons^™

Uav Attitude Control With Lqr Controller Based On Extended State Observer, Pan Jian, Changlong Liu

Journal of System Simulation

Abstract: Due to the external disturbances and parameter variations in the complex environment, the traditional linear quadratic controller (LQR) may induce instability to the controlled object. A control strategy of LQR based on extended state observer (ESO) is proposed, which aims to ensure the working reliability of the controlled object in complex environment. The nonlinear mathematical model of the quadrotor Qball-X4 is established. The ESO’s abilities of estimating and compensating the impact of internal/external disturbances simultaneously are used to improve the LQR attitude controller. Matlab/Simulink simulation and an experiment of trajectory tracking on the quadrotor Qball-X4 verify the validity …

Emerging Roles Of Virtual Patients In The Age Of Ai, C. Donald Combs, P. Ford Combs

Computational Modeling & Simulation Engineering Faculty Publications

Today's web-enabled and virtual approach to medical education is different from the 20th century's Flexner-dominated approach. Now, lectures get less emphasis and more emphasis is placed on learning via early clinical exposure, standardized patients, and other simulations. This article reviews literature on virtual patients (VPs) and their underlying virtual reality technology, examines VPs' potential through the example of psychiatric intake teaching, and identifies promises and perils posed by VP use in medical education.

An Evaluation Of Learning Employing Natural Language Processing And Cognitive Load Assessment, Mrunal Tipari

Dissertations

One of the key goals of Pedagogy is to assess learning. Various paradigms exist and one of this is Cognitivism. It essentially sees a human learner as an information processor and the mind as a black box with limited capacity that should be understood and studied. With respect to this, an approach is to employ the construct of cognitive load to assess a learner's experience and in turn design instructions better aligned to the human mind. However, cognitive load assessment is not an easy activity, especially in a traditional classroom setting. This research proposes a novel method for evaluating learning …

Deep Learning: Edge-Cloud Data Analytics For Iot, Katarina Grolinger, Ananda M. Ghosh

Electrical and Computer Engineering Publications

Sensors, wearables, mobile and other Internet of Thing (IoT) devices are becoming increasingly integrated in all aspects of our lives. They are capable of collecting massive quantities of data that are typically transmitted to the cloud for processing. However, this results in increased network traffic and latencies. Edge computing has a potential to remedy these challenges by moving computation physically closer to the network edge where data are generated. However, edge computing does not have sufficient resources for complex data analytics tasks. Consequently, this paper investigates merging cloud and edge computing for IoT data analytics and presents a deep learning-based …

Emotion Forecasting In Dyadic Conversation : Characterizing And Predicting Future Emotion With Audio-Visual Information Using Deep Learning, Sadat Shahriar

Legacy Theses & Dissertations (2009 - 2024)

Emotion forecasting is the task of predicting the future emotion of a speaker, i.e., the emotion label of the future speaking turn–based on the speaker’s past and current audio-visual cues. Emotion forecasting systems require new problem formulations that differ from traditional emotion recognition systems. In this thesis, we first explore two types of forecasting windows(i.e., analysis windows for which the speaker’s emotion is being forecasted): utterance forecasting and time forecasting. Utterance forecasting is based on speaking turns and forecasts what the speaker’s emotion will be after one, two, or three speaking turns. Time forecasting forecasts what the speaker’s emotion will …

Controlled Switching In Kalman Filtering And Iterative Learning Controls, He Li

Masters Theses

“Switching is not an uncommon phenomenon in practical systems and processes, for examples, power switches opening and closing, transmissions lifting from low gear to high gear, and air planes crossing different layers in air. Switching can be a disaster to a system since frequent switching between two asymptotically stable subsystems may result in unstable dynamics. On the contrary, switching can be a benefit to a system since controlled switching is sometimes imposed by the designers to achieve desired performance. This encourages the study of system dynamics and performance when undesired switching occurs or controlled switching is imposed. In this research, …

Dedicated Hardware For Machine/Deep Learning: Domain Specific Architectures, Angel Izael Solis

Open Access Theses & Dissertations

Artificial intelligence has come a very long way from being a mere spectacle on the silver screen in the 1920s [Hml18]. As artificial intelligence continues to evolve, and we begin to develop more sophisticated Artificial Neural Networks, the need for specialized and more efficient machines (less computational strain while maintaining the same performance results) becomes increasingly evident. Though these “new” techniques, such as Multilayer Perceptron’s, Convolutional Neural Networks and Recurrent Neural Networks, may seem as if they are on the cutting edge of technology, many of these ideas are over 60 years old! However, many of these earlier models, at …

Personal Universes: A Solution To The Multi-Agent Value Alignment Problem, Roman V. Yampolskiy

Faculty and Staff Scholarship

AI Safety researchers attempting to align values of highly capable intelligent systems with those of humanity face a number of challenges including personal value extraction, multi-agent value merger and finally in-silico encoding. State-of-the-art research in value alignment shows difficulties in every stage in this process, but merger of incompatible preferences is a particularly difficult challenge to overcome. In this paper we assume that the value extraction problem will be solved and propose a possible way to implement an AI solution which optimally aligns with individual preferences of each user. We conclude by analyzing benefits and limitations of the proposed approach.

Exploring Cyber-Physical Systems, Misbah Uddin Mohammed

Graduate Research Theses & Dissertations

The advances in IOT, Computer Vision, AI and Machine Learning have made these technologies ubiquitous to our daily lives. From Smart Phones to Connected Vehicles, Cyber Physical systems have been interspersed into everything we interact in today’s world. The aim or this thesis was to explore these advances in Cyber Physical Systems and analyze the different sectors they were affecting. We then hand-picked certain domains and explored further by carrying out practical projects using some of the latest software and hardware resources available. Technologies like Amazon Alexa services, NVIDIA Jetson boards, TensorFlow, OpenCV, NodeJS were heavily employed in our various …

Volumetric Error Compensation For Industrial Robots And Machine Tools, Le Ma

Doctoral Dissertations

“A more efficient and increasingly popular volumetric error compensation method for machine tools is to compute compensation tables in axis space with tool tip volumetric measurements. However, machine tools have high-order geometric errors and some workspace is not reachable by measurement devices, the compensation method suffers a curve-fitting challenge, overfitting measurements in measured space and losing accuracy around and out of the measured space. Paper I presents a novel method that aims to uniformly interpolate and extrapolate the compensation tables throughout the entire workspace. By using a uniform constraint to bound the tool tip error slopes, an optimal model with …

Effective Plant Discrimination Based On The Combination Of Local Binary Pattern Operators And Multiclass Support Vector Machine Methods, Vi N T Le, Beniamin Apopei, Kamal Alameh

Research outputs 2014 to 2021

Accurate crop and weed discrimination plays a critical role in addressing the challenges of weed management in agriculture. The use of herbicides is currently the most common approach to weed control. However, herbicide resistant plants have long been recognised as a major concern due to the excessive use of herbicides. Effective weed detection techniques can reduce the cost of weed management and improve crop quality and yield. A computationally efficient and robust plant classification algorithm is developed and applied to the classification of three crops: Brassica napus (canola), Zea mays (maize/corn), and radish. The developed algorithm is based on the …

Computational Modeling Of Trust Factors Using Reinforcement Learning, C. M. Kuzio, A. Dinh, C. Stone, L. Vidyaratne, K. M. Iftekharuddin

Electrical & Computer Engineering Faculty Publications

As machine-learning algorithms continue to expand their scope and approach more ambiguous goals, they may be required to make decisions based on data that is often incomplete, imprecise, and uncertain. The capabilities of these models must, in turn, evolve to meet the increasingly complex challenges associated with the deployment and integration of intelligent systems into modern society. Historical variability in the performance of traditional machine-learning models in dynamic environments leads to ambiguity of trust in decisions made by such algorithms. Consequently, the objective of this work is to develop a novel computational model that effectively quantifies the reliability of autonomous …

Sensor-Based Human Activity Recognition Using Bidirectional Lstm For Closely Related Activities, Arumugam Thendramil Pavai

Electronic Theses, Projects, and Dissertations

Recognizing human activities using deep learning methods has significance in many fields such as sports, motion tracking, surveillance, healthcare and robotics. Inertial sensors comprising of accelerometers and gyroscopes are commonly used for sensor based HAR. In this study, a Bidirectional Long Short-Term Memory (BLSTM) approach is explored for human activity recognition and classification for closely related activities on a body worn inertial sensor data that is provided by the UTD-MHAD dataset. The BLSTM model of this study could achieve an overall accuracy of 98.05% for 15 different activities and 90.87% for 27 different activities performed by 8 persons with 4 …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

Automatic Identification Of Animals In The Wild: A Comparative Study Between C-Capsule Networks And Deep Convolutional Neural Networks., Joel Kamdem Teto, Ying Xie

Master of Science in Computer Science Theses

The evolution of machine learning and computer vision in technology has driven a lot of

improvements and innovation into several domains. We see it being applied for credit decisions, insurance quotes, malware detection, fraud detection, email composition, and any other area having enough information to allow the machine to learn patterns. Over the years the number of sensors, cameras, and cognitive pieces of equipment placed in the wilderness has been growing exponentially. However, the resources (human) to leverage these data into something meaningful are not improving at the same rate. For instance, a team of scientist volunteers took 8.4 years, …

Higher-Level Consistencies: Where, When, And How Much, Robert J. Woodward

School of Computing: Dissertations, Theses, and Student Research

Determining whether or not a Constraint Satisfaction Problem (CSP) has a solution is NP-complete. CSPs are solved by inference (i.e., enforcing consistency), conditioning (i.e., doing search), or, more commonly, by interleaving the two mechanisms. The most common consistency property enforced during search is Generalized Arc Consistency (GAC). In recent years, new algorithms that enforce consistency properties stronger than GAC have been proposed and shown to be necessary to solve difficult problem instances.

We frame the question of balancing the cost and the pruning effectiveness of consistency algorithms as the question of determining where, when, and how much of a higher-level …

Enhancing 3d Visual Odometry With Single-Camera Stereo Omnidirectional Systems, Carlos A. Jaramillo

Dissertations, Theses, and Capstone Projects

We explore low-cost solutions for efficiently improving the 3D pose estimation problem of a single camera moving in an unfamiliar environment. The visual odometry (VO) task -- as it is called when using computer vision to estimate egomotion -- is of particular interest to mobile robots as well as humans with visual impairments. The payload capacity of small robots like micro-aerial vehicles (drones) requires the use of portable perception equipment, which is constrained by size, weight, energy consumption, and processing power. Using a single camera as the passive sensor for the VO task satisfies these requirements, and it motivates the …

Computational Thinking And Literacy, Sharin Rawhiya Jacob, Mark Warschauer

Journal of Computer Science Integration

Today’s students will enter a workforce that is powerfully shaped by computing. To be successful in a changing economy, students must learn to think algorithmically and computationally, to solve problems with varying levels of abstraction. These computational thinking skills have become so integrated into social function as to represent fundamental literacies. However, computer science has not been widely taught in K-12 schools. Efforts to create computer science standards and frameworks have yet to make their way into mandated course requirements. Despite a plethora of research on digital literacies, research on the role of computational thinking in the literature is sparse. …

Investigating Dataset Distinctiveness, Andrew Ulmer, Kent W. Gauen, Yung-Hsiang Lu, Zohar R. Kapach, Daniel P. Merrick

The Summer Undergraduate Research Fellowship (SURF) Symposium

Just as a human might struggle to interpret another human’s handwriting, a computer vision program might fail when asked to perform one task in two different domains. To be more specific, visualize a self-driving car as a human driver who had only ever driven on clear, sunny days, during daylight hours. This driver – the self-driving car – would inevitably face a significant challenge when asked to drive when it is violently raining or foggy during the night, putting the safety of its passengers in danger. An extensive understanding of the data we use to teach computer vision models – …

Deep Neural Network Architectures For Modulation Classification Using Principal Component Analysis, Sharan Ramjee, Shengtai Ju, Diyu Yang, Aly El Gamal

The Summer Undergraduate Research Fellowship (SURF) Symposium

In this work, we investigate the application of Principal Component Analysis to the task of wireless signal modulation recognition using deep neural network architectures. Sampling signals at the Nyquist rate, which is often very high, requires a large amount of energy and space to collect and store the samples. Moreover, the time taken to train neural networks for the task of modulation classification is large due to the large number of samples. These problems can be drastically reduced using Principal Component Analysis, which is a technique that allows us to reduce the dimensionality or number of features of the samples …

Identification And Optimal Linear Tracking Control Of Odu Autonomous Surface Vehicle, Nadeem Khan

Mechanical & Aerospace Engineering Theses & Dissertations

Autonomous surface vehicles (ASVs) are being used for diverse applications of civilian and military importance such as: military reconnaissance, sea patrol, bathymetry, environmental monitoring, and oceanographic research. Currently, these unmanned tasks can accurately be accomplished by ASVs due to recent advancements in computing, sensing, and actuating systems. For this reason, researchers around the world have been taking interest in ASVs for the last decade. Due to the ever-changing surface of water and stochastic disturbances such as wind and tidal currents that greatly affect the path-following ability of ASVs, identification of an accurate model of inherently nonlinear and stochastic ASV system …

Combination Forecasting Of Stock Index Time Series Based On Cooperative Game Theory, Luo Wei

Journal of System Simulation

Abstract: In view of the characteristics of nonlinear, large amplitude, frequent fluctuations in China's stock market, a prediction method of intelligent composite stock index time series based on the cooperative game is presented. The prediction model of stock index time series is established by using neural network method based on the correlations among the various economic indicators, and the development trend and laws of stock index time series are established by using the improved ARIMA method. The two methods are combined by importing cooperative game method. Simulation results show that the prediction accuracy of the presented method is controlled …

Real-Time Simulator For Spatial Information Networks Based On Analog If Signal Processing, Zeguo Yang, Ma Shang, Diaopeng Huang, Jianhao Hu, Lixiang Liu

Journal of System Simulation

Abstract: To solve the problem of real-time simulation of spatial information network with high dynamic network topology, a real-time simulator based on the IF signal processing is proposed. Compared with traditional channel simulator, it supports both the channel transmission characteristics like channel fading, Doppler shift, noise, and path delay, and the real-time simulation of dynamic network topology changes. The simulator supports 8~128 70 MHz IF (0~20 MHz signal bandwidth) emulated nodes with flexible link type configuration. The maximal fading depth is 100 dB, the maximal Doppler shift is 2 MHz, and the maximal path delay can reach up …

Research And Simulation Of Roots-Type Power Machine Control System Based On Fuzzy Pid, Yan-Jun Xiao, Yonggeng Wang, Jing Ran, Feng Hua, Yongcong Li

Journal of System Simulation

Abstract: For utilizing the domestic low grade waste heat resources, a Roots-type steam engine is developed. To make the roots engine stably output electric energy, an efficient constant power control system needs to be designed. The controlled object characteristics of the roots engine are analyzed; the modeling of the control system is established; and on this basis the fuzzy control algorithm is introduced. The fuzzy adaptive PID controller for the roots power machine constant power output is designed and the related MATLAB simulation is carried out. The results show that the Roots type steam power machine with fuzzy adaptive PID …

Application Of Finite Element Modification And Model Order Reduction In Temperature Control System, Xiaona Wang, Ye Ying, Qiyue Xu, Sebastian Marin, Michael Hohmann, Shuliang Ye

Journal of System Simulation

Abstract: A modification and model order reduction (MOR) method based on finite element model is proposed, which can be used in the design of simulation platform of furnace temperature control system. Based on the step response test of furnace behavior and the modification of finite element model's key parameters in ANSYS, the model reflecting the actual characteristics of furnace is obtained. Based on the software tool called mor4ansys using Krylo subspace reduction method, the state space model is obtained. The MATLAB/Simulink simulation platform based on state space model is built for more research work on furnace temperature control design. Based …

Online Synthesis Incremental Data Streams Classification Algorithm, Sanmin Liu, Yuxia Liu

Journal of System Simulation

Abstract: Online learning is the effective way to solve the sample's non-recurrence in data streams classification, and how to deal with the problem of sample deficiency is the critical point for improving online learning efficiency. According to the mean square error decomposition theory of the model's parameter estimation and the idea of cluster, the new samples are constructed by linear synthesis with the class center and the sample, which can improve the distribution information of sample and reduce the lower bound of parameter value. The online incremental learning is executed and the class center point is continuously updated. Through theory …

A Lightweight Modeling And Simulation Technical Framework For Complex Systems, Ji Hang, Junhua Zhou, Guoqiang Shi, Tingyu Lin, Junjie Xue

Journal of System Simulation

Abstract: Aiming at the modeling and simulation verification of complex systems, the paper established a lightweight simulation technical framework and a system building method. The simulation technical framework is built based on distributed network communication middleware and has graphic user interface, simulation management and run control modules, it packages effective and lightweight network middleware, object management, event management and time management and it is capable of interoperability and its members have abilities of reusable and combinable. The results show that the framework can supports flexible construction and effective simulation on complex systems.

Temperature Characteristics Of Contact Wire Under Different Driving Intervals, Hongwei Wang, Zhang Kai, Zhiyong Wang, Fengyi Guo, Liu Shuai, Zhang Qiong

Journal of System Simulation

Abstract: To reduce the wear of pantograph and catenary system while decreasing the headway, the temperature field of the contact wire is studied. A simulation model is established by using the COMSOL Multiphysics software. The effectiveness of the model is verified with temperature experiments. Temperature field of the contact wire of freight locomotive and passenger locomotive in different intervals is studied by simulation. The smaller the headway of trains, the higher the temperature value, and the shorter the balance process. Under the constraint of temperature field, the headway of freight locomotive couldn't be less than 180s under long term operation. …

Modeling And Simulation Of Islanded System With Wind And Storage Power, Ye Peng, Yaoning Hu, Minghui Sun

Journal of System Simulation

Abstract: With the consumption of primary energy and the severe environmental issues, the new energy power generation has been attracted much attention by scholars at home and abroad. As an important application form of new energy power generation, the operation of the islanded system with wind and storage power has a huge potential for future development. For the islanded system with wind and storage power, each mathematical model and the mathematical model of control system were established. In the electromagnetic transient simulation platform PSCAD, the corresponding electromagnetic transient simulation model was built based on the established mathematical model. The dynamic …

Analysis And Simulation Of Temperature Control For Battery Pole Piece Electromagnetic Heating Roller, Jing Ran, Feng Hua, Yonggeng Wang, Haiping Song, Yanjun Xiao

Journal of System Simulation

Abstract: With the application of electromagnetic heating roller on battery pole piece rolling,the processing technology, quality and efficiency of the battery pole piece are improved. The special heating technology of electromagnetic heating roller which involves multi-physics coupling in the process of conversion makes it difficult to control the heating process and determine the control index. By studying the electromagnetic heating theory, the mathematical model of electromagnetic heating roller is established and the simulation and analysis of the electromagnetic heating roller using MATLAB software and the finite difference method are carried out. The distribution, change rule and influence factors of the …