Open Access. Powered by Scholars. Published by Universities.®

Transportation Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Publications

Discipline
Institution
Keyword
Publication Year
Publication Type

Articles 121 - 150 of 190

Full-Text Articles in Transportation Engineering

Enhancing Evaluation Of Wildlife Detection Systems, Nick N. Ferenchak Ph.D Oct 2020

Enhancing Evaluation Of Wildlife Detection Systems, Nick N. Ferenchak Ph.D

Publications

Every year in the United States, wildlife-vehicle collisions (WVCs) cause 200 human fatalities, 26,000 human injuries, and substantial harm to wildlife populations, resulting in approximately $8.4 billion in total costs. The research team examined two US 64 bridges located near Lumberton, New Mexico that were designed to allow wildlife to cross underneath. Monitoring stations were positioned at each of the crossings so that both wildlife approaches and passages were observed. Special mounting brackets were designed and fabricated to allow for the installation of monitoring equipment. Wildlife observations were supplemented with WVC counts. Over seven months of study, nearly 100,000 wildlife …

Go to article

Optimizing The Geometric Configuration And Manufacturing Process Of High Mast Illumination Poles, Arturo Montoya Ph.D, Adolfo Matamoros Ph.D, Reza Nasouri, Echizeni Ikpah, Arsalan Majlesi Oct 2020

Optimizing The Geometric Configuration And Manufacturing Process Of High Mast Illumination Poles, Arturo Montoya Ph.D, Adolfo Matamoros Ph.D, Reza Nasouri, Echizeni Ikpah, Arsalan Majlesi

Publications

This work presents the development of a high-fidelity model that accounts for the cumulative effect of welding and hot- dip galvanizing on the determining the resulting residual stresses and deformations induced during the manufacturing process of high mast illumination poles (HMIPs). This model is meant to elucidate the root causes of weld toe cracks in HMIPs. A TxDOT pole-to-base plate connection detail was used as the reference model in the analysis. Welding was modeled using the plug-in Abaqus Welding Interface (AWI), which automatically implements a series of sequential thermal and mechanical analyses. Then, the welding stress results were used as …

Go to article

Bridge Construction Monitoring Using Lidar For Quantified, Objective Quality-Control Quality-Assurance (Qoqcqa), Fernando Moreu Ph.D, Chris Lippitt Ph.D, Xinxing Yuan Oct 2020

Bridge Construction Monitoring Using Lidar For Quantified, Objective Quality-Control Quality-Assurance (Qoqcqa), Fernando Moreu Ph.D, Chris Lippitt Ph.D, Xinxing Yuan

Publications

Transportation infrastructure construction quality control and quality assurance demands construction monitoring by field inspectors. Currently, these inspectors monitor infrastructure by measuring and photographing structures. These tasks allow them to assess any correction decision during construction or to inform about the quality of the construction process for the future. In order to promote and objective decisions obtained during infrastructure construction, the proposed research project developed and implemented a methodology to measure construction progress and compared it with the designed 3D shape, quantifying the difference. This proposed project includes implementation for the development of DOT standards that could be added in near …

Go to article

The Impacts Of Increased Adverse Weather Events On Freight Movement, Kyung "Kate" Hyun Ph.D, Stephen P. Mattingly Ph.D, Mehrdad Arabi Oct 2020

The Impacts Of Increased Adverse Weather Events On Freight Movement, Kyung "Kate" Hyun Ph.D, Stephen P. Mattingly Ph.D, Mehrdad Arabi

Publications

Freight transportation is a major economic backbone of the United States and is vital to sustaining the nation’s economic growth. Ports, as one of the primary components of freight transportation and important means of integrating into the global economic system, have experienced significant growth and increased capacity during the past two decades. The study addresses an important national freight mobility goal to enhance the resilience of the port transportation operations in the event of extreme weather events. This study develops an adaptable resilience assessment framework that evaluates the impact of a disruptive event on transportation operations. The framework identifies dynamic …

Go to article

Development Of Corrosion Inhibiting Geopolymers Based Cement For Transportation Infrastructure, Homero Castaneda, Miladin Radovic, Changkyu Kim, Oscar Huang Oct 2020

Development Of Corrosion Inhibiting Geopolymers Based Cement For Transportation Infrastructure, Homero Castaneda, Miladin Radovic, Changkyu Kim, Oscar Huang

Publications

Geopolymers are gaining attention as affordable, sustainable, and eco-friendly replacement for Ordinary Portland Cement (OPC) in concrete civil structures. More importantly, Geopolymer-based Cement (GPC) provide sustainable and environmentally friendly alternative to OPCs as GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g., fly ash) or abounded natural sources (e.g., clay) and thus reduce significant CO2 production associated with processing of OPC. Although, a lot of work has been done on improving mechanical properties of GPC over the last two decades, there are only a few studies on effects of GPC concrete on steel rebar …

Go to article

Eco-Friendly Stabilization Of Sulfate-Rich Expansive Soils Using Geopolymers For Transportation Infrastructure, Xinbao Yu, Anand Puppala, Miladin Radovic, Sayantan Chakraborty, Jungyeon Jang, Oscar Huang Oct 2020

Eco-Friendly Stabilization Of Sulfate-Rich Expansive Soils Using Geopolymers For Transportation Infrastructure, Xinbao Yu, Anand Puppala, Miladin Radovic, Sayantan Chakraborty, Jungyeon Jang, Oscar Huang

Publications

Traditional calcium-based stabilizers, such as lime, to stabilize sulfate-rich expansive soils, are lasting-challenges in geotechnical engineering. The biggest problem with using calcium-based stabilizers is that when calcium and water are exposed to sulfate-rich expansive soils, they form ettringite as an expansive mineral, which causes sulfate-induced heaving. The study aimed to investigate the feasibility of stabilizing sulfate-rich expansive soils using geopolymers for transportation infrastructure. Literature review on sulfate-induced heaving and sulfate-rich soils stabilized with geopolymers suggests a direction for how to stabilize sulfate soils using geopolymers. The engineering tests were conducted to determine the swell, shrinkage, and strength behavior of natural, …

Go to article

Advanced Modeling And Design Methodology For Pavements Using Plasticity-Based Shakedown Theory, Shengli Chen, Chao Sun, Xu Wang, Zhiming Zhang Oct 2020

Advanced Modeling And Design Methodology For Pavements Using Plasticity-Based Shakedown Theory, Shengli Chen, Chao Sun, Xu Wang, Zhiming Zhang

Publications

Pavement design is a process intended to find the most economical combination of layer thickness and material type for the pavement, taking into account the properties of the subgrade soil and the traffic to be carried during the service life of the road. The currently prevalent methods of pavement analysis and design, however, are more or less empirical in U.S., which possess the shortcoming that the important type of pavement distress of rutting related to the accumulation of plastic or permanent deformations cannot be effectively considered. This project proposes an exploratory study on the application of the plasticity theory-based shakedown …

Go to article

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power Jan 2020

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power

Publications

Civil Engineering Research in Ireland 2020: Conference Proceedings.

Go to article

Soil-Recycled Aggregate-Geopolymer Road Base/Subbase Mixtures: Steps Towards Sustainability, Mohammad Khattak, Daniel Odion Oct 2019

Soil-Recycled Aggregate-Geopolymer Road Base/Subbase Mixtures: Steps Towards Sustainability, Mohammad Khattak, Daniel Odion

Publications

This study deals with the development of Soil-Geopolymer mixtures using flyash, alkali activator and recycled aggregates (RAG) including recycled concrete (RCA) and reclaimed asphalt (RAP) as an alternative to soil-cement for pavement base and subbase layers. Several mix constituents were varied such as flyash type and content, RCA and RAP content and ratio of sodium silicate and sodium hydroxide. Experiment design was established and mechanical and durability characteristics of Soil-RAG-Geopolymer mixtures were evaluated and then compared to the conventional soil-cement mixtures. The results of the testing showed that for the selected Soil-RAG-Geopolymer mixtures the strength, stiffness, permanent deformation, and durability …

Go to article

The Impact Of Hurricane Harvey On Pavement Structures In The South East Texas And South West Louisiana, Stefan Romanoschi Oct 2019

The Impact Of Hurricane Harvey On Pavement Structures In The South East Texas And South West Louisiana, Stefan Romanoschi

Publications

This study developed a methodology to estimate the damage caused by flooding, such that caused by Hurricane Harvey, on a road or street network. The flooded street or pavement sections are identified using GIS flood maps with street GIS maps used for pavement management systems (PMS) by cities or state authorities. Then the damage caused by flooding directly through the increase moisture in foundation layers or indirectly due to the increase heavy traffic during the relief effort is estimated. An example Excel macro was created to illustrate the estimation process. The methodology estimates the increase in rehabilitation costs since the …

Go to article

Mitigating Reflective Cracking Through The Use Of A Ductile Concrete Interlayer, Qian Zhang, Mohammad Khattak, Adway Das Sep 2019

Mitigating Reflective Cracking Through The Use Of A Ductile Concrete Interlayer, Qian Zhang, Mohammad Khattak, Adway Das

Publications

Reflective cracking is considered one of the most important issues that causes premature deterioration of composite pavements. Many types of mitigation methods have been studied in the past. However, they are either not effective in delaying the reflective cracking, or they only extend the service life by a few years. To address this critical issue and significantly extend the service life of the composite pavement, in this research, a ductile interlayer made of engineered cementitious composites (ECC) was proposed. It was hypothesized that by adding a thin layer of highly ductile ECC material between the existing pavement and overlay, reflective …

Go to article

Performance Of Drilled Shaft Under Combination Of Complicated Loads Under Hurricane Event, Jie Huang, Sazzad Bin-Shafique Sep 2019

Performance Of Drilled Shaft Under Combination Of Complicated Loads Under Hurricane Event, Jie Huang, Sazzad Bin-Shafique

Publications

This project includes experimental and numerical studies to investigate and assess the impact of vertical loads on a laterally loaded drilled shaft under various conditions. The experimental study includes lab testing and lab-scale load test to examine a drilled shaft subjected to vertical and lateral loads at a reduced scale. With the data obtained from the lab-scale testing, a numerical model was calibrated, which was used to perform a parametric study to scrutinize the effect of many possible factors such as soil stiffness, soil friction angle, and drilled shaft geometry. With all the factors considered in this study, the vertical …

Go to article

Investigation Of Physical And Dynamic Properties Of High Porous Concrete, Ildar Akhmadullin Sep 2019

Investigation Of Physical And Dynamic Properties Of High Porous Concrete, Ildar Akhmadullin

Publications

This project pursued two main objectives: (1) providing opportunities to Baton Rouge Community College (BRCC) students to develop hands-on laboratory skills and exposure to the transportation field, and (2) investigating porous concrete properties. Several BRCC student groups performed the work presented within this report; students prepared samples with different porosity and permeability according to standard specifications. The testing of the samples was performed at the Louisiana Transportation Research Center (LTRC) facility under the supervision of LTRC specialists. Findings indicate that the porosity of samples is backward proportional to the compression strength. This function is not linear but can be estimated …

Go to article

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya Sep 2019

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya

Publications

This research focused on investigating a highly sustainable and efficient reinforced concrete structural member for future infrastructure by utilizing emerging high-performance materials. These materials include ultra-high-performance fiber-reinforced concrete (UHP-FRC) and corrosion-resistant high-strength fiber-reinforced polymer (FRP) bars. Four reduced scale UHP-FRC specimens were tested under large displacement reversals to prove the proposed new ductile-concrete strong-reinforcement (DCSR) design concept by fully utilizing these ultra-high-performance materials. Micro steel fibers were incorporated into three specimens and ultra-high molecular weight polyethylene fibers were blended into the fourth specimen. One specimen with ASTM A1035 MMFX high-strength steel rebars, one with high-strength glass fiber reinforced polymer (GFRP) …

Go to article

Evaluating How The Quality Of Pedestrian Infrastructure Affects The Choice To Walk, Gregory Rowangould, Alexis Corning-Padilla Sep 2019

Evaluating How The Quality Of Pedestrian Infrastructure Affects The Choice To Walk, Gregory Rowangould, Alexis Corning-Padilla

Publications

While the benefits of walking are well understood, the physical design of sidewalks and their maintenance needs generally receive much less attention in both research and practice than the infrastructure used by other modes of transportation. As a result, we know comparatively little about how the design of sidewalks and quality of the overall pedestrian environment affect the decision to walk. In our study we conducted a household travel survey to collect data on walking frequency and attributes related to sidewalk quality and the quality of the walking environment in Albuquerque, New Mexico. We used summary statistics and statistical modeling …

Go to article

Combining Virtual Reality And Machine Learning For Enhancing The Resiliency Of Transportation Infrastructure In Extreme Events, Supratik Mukhopadhyay, Yimin Zhu, Ravindra Gudishala Sep 2019

Combining Virtual Reality And Machine Learning For Enhancing The Resiliency Of Transportation Infrastructure In Extreme Events, Supratik Mukhopadhyay, Yimin Zhu, Ravindra Gudishala

Publications

Traffic management models that include route choice form the basis of traffic management systems. High-fidelity models that are based on rapidly evolving contextual conditions can have significant impact on smart and energy efficient transportation. Existing traffic/route choice models are generic and are calibrated on static contextual conditions. These models do not consider dynamic contextual conditions such as the location, failure of certain portions of the road network, the social network structure of population inhabiting the region, route choices made by other drivers, extreme conditions, etc. As a result, the model’s predictions are made at an aggregate level and for a …

Go to article

Integrated Full-Scale Physical Experiments And Numerical Modeling Of The Performance And Rehabilitation Of Highway Embankments, Navid Jafari, Anand Puppala, Sayantan Chakraborty, Burak Boluk Sep 2019

Integrated Full-Scale Physical Experiments And Numerical Modeling Of The Performance And Rehabilitation Of Highway Embankments, Navid Jafari, Anand Puppala, Sayantan Chakraborty, Burak Boluk

Publications

The study aimed to fundamentally understand how soil strength and hydraulic properties are impacted by recurring cycles of wetting and drying induced by climate variability, with the practical implication of forecasting the stability of highway embankment slopes. The review of literature on the effects of long-term cyclic wetting-drying phases on hydro-mechanical properties of clayey soils suggests that only a few cycles of wetting and drying can impact the strength and hydraulic conductivity, where the latter can increase several orders of magnitude. Laboratory model-scale experiments of Louisiana and Texas soils are still ongoing and will relate the laboratory test results to …

Go to article

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala Sep 2019

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala

Publications

Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and environmentally friendly alternative than OPC. This research explores methods to develop GPC with desired properties and evaluate their …

Go to article

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo Aug 2019

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo

Publications

This research investigated the use of locally produced ultra-high performance concrete (UHPC) as a grouting material to repair deteriorated shear keys. Shear keys are used in adjacent girder superstructures to produce monolithic behavior and load transfer across the structure. Shear key durability is a concern since shear key degradation can jeopardize the integrity of the structure. Transportation agencies have reported that 75% of distress in adjacent girder bridges is due to cracking and de-bonding along shear keys. Previous research has shown that locally produced UHPC has excellent mechanical and durability properties. UHPC has also been shown to have good bonding …

Go to article

Lifecycle Environmental Impact Of High-Speed Rail System In The I-45 Corridor, Raghava Kommalapati, Venkata Botlaguduru, Doeun Choe Aug 2019

Lifecycle Environmental Impact Of High-Speed Rail System In The I-45 Corridor, Raghava Kommalapati, Venkata Botlaguduru, Doeun Choe

Publications

The Houston-Dallas (I-45) corridor is the busiest route among 18 traffic corridors in Texas. The expected population growth and the surge in passenger mobility could result in a significant impact on the regional environment. This study uses a life cycle framework to estimate the net change in environmental impact with the development of a high speed rail system (HSR) along the I-45 corridor. The study follows ISO 14040 principles and standards of life cycle assessment and uses SimaPro 8.5® software and the Ecoinvent 3.3 inventory database. Infrastructure construction, vehicle manufacturing, system operation, and end of life phases are included in …

Go to article

Smart Charging Of Future Electric Vehicles Using Roadway Infrastructure, Sara Ahmed, Ethan Ahn, Mahmoud Reda Taha, Samer Dessouky, Moneeb Genedy, Daniel Fernandez, Ann Sebestian, Patience Raby Aug 2019

Smart Charging Of Future Electric Vehicles Using Roadway Infrastructure, Sara Ahmed, Ethan Ahn, Mahmoud Reda Taha, Samer Dessouky, Moneeb Genedy, Daniel Fernandez, Ann Sebestian, Patience Raby

Publications

Inspired by the fact that there is an immense amount of renewable energy sources available on the roadways such as mechanical pressure and frictional heat, this study presented the development and implementation of an innovative charging technique for future electric vehicles (EVs) by fully utilizing the existing roadways and the state-of-the-art nanotechnology and power electronics. The project introduced a novel wireless charging system, SIC (Smart Illuminative Charging), that uses LEDs powered by piezoelectric nanomaterials as the energy transmitter source and thin film solar panels placed at the bottom of the EVs as the receiver, which is then poised to deliver …

Go to article

Vehicle Sensing And Communications Using Led Headlights To Enhance The Performance Of Intelligent Transportation Systems: Proof Of Concept, Implementation, And Applications, Sabit Ekin, Samir Ahmed Aug 2019

Vehicle Sensing And Communications Using Led Headlights To Enhance The Performance Of Intelligent Transportation Systems: Proof Of Concept, Implementation, And Applications, Sabit Ekin, Samir Ahmed

Publications

This project investigates the use of vehicle light-emitting diode (LED) headlamp devices for improving the accuracy and reliability of traffic (sensing and communication) data measurements required for developing effective intelligent transportation systems (ITS) technologies and solutions. Vehicular communication and sensing technologies are mainly based on conventional radio frequency (RF) or laser technologies. These systems suffer from several issues such as RF interference and poor performance in scenarios where the incidence angle between the speed detector and the vehicle is rapidly varying. Introducing a new sensing technology will add diversity to these systems and enhance the reliability of the real-time data. …

Go to article

Elimination Of Empirical, Ineffective And Expensive Pg Plus Tests To Characterize Modified Binders, Zahid Hossain, Ashraf Elsayed, Mm Tariq Morshed, Mohammad Hassan Aug 2019

Elimination Of Empirical, Ineffective And Expensive Pg Plus Tests To Characterize Modified Binders, Zahid Hossain, Ashraf Elsayed, Mm Tariq Morshed, Mohammad Hassan

Publications

For characterizing the polymer modified binders, different state Departments of Transportation (DOTs) use different time consuming and empirical Performance Grade (PG) Plus test methods. Furthermore, the PG Plus tests are silent when asphalt binders are modified with chemicals such as polyphosphoric acid (PPA). But, the effects of the elastomeric or plastomeric polymer are not accurately identified through these conventional tests such as Elastic Recovery (ER) and tenacity. Thus, the main research goal of this study is to recommend alternative test method(s), which can possibly be pursued by using a commonly available device, a Dynamic Shear Rheometer (DSR). Three PG binders …

Go to article

Use Of Rice Husk Ash (Rha) In Flowable Fill Concrete Mix Material, Zahid Hossain, Kazi Tamzidul Islam Aug 2019

Use Of Rice Husk Ash (Rha) In Flowable Fill Concrete Mix Material, Zahid Hossain, Kazi Tamzidul Islam

Publications

In the way of finding sustainable development, the flowable fill is a relatively new construction technology. Flowable fill is a self-compacting material, which has been developed in recent years. Flowable fill has been used for different applications such as backfilling walls, sewer trenches, bridge abutments, conduit trenches, pile excavations, and retaining walls. This study examines the potential uses of Rice Husk Ash (RHA) as a sustainable cementitious material (SCM) in the preparation of flowable fill concrete. (RHA is an agricultural by-product of the rice milling process. This study has evaluated the usage of RHA in producing low strength and self-consolidating …

Go to article

Self-Healing Concrete Using Encapsulated Bacterial Spores In A Simulated Hot Subtropical Climate, Marwa Hassan, Jose Milla, Tyson Rupnow, Ahsennur Soysal Aug 2019

Self-Healing Concrete Using Encapsulated Bacterial Spores In A Simulated Hot Subtropical Climate, Marwa Hassan, Jose Milla, Tyson Rupnow, Ahsennur Soysal

Publications

Bacterial concrete has become one of the most promising self-healing alternatives due to its capability to seal crack widths through microbial induced calcite precipitation (MICP). In this study, two bacterial strains were embedded at varying dosages (by weight of cement) in concrete. Beam specimens were used to identify the maximum crack-sealing efficiency, while cylinder samples were used to determine their effects on the intrinsic mechanical properties, as well as its stiffness recovery over time after inducing damage. The concrete specimens were cured in wet-dry cycles to determine their feasibility in Region 6. The results showed that the specimen groups with …

Go to article

Karst Sinkhole Detecting And Mapping Using Airborne Lidar, Su Zhang, Shirley Baros, Susan Bogus Aug 2019

Karst Sinkhole Detecting And Mapping Using Airborne Lidar, Su Zhang, Shirley Baros, Susan Bogus

Publications

The focus of this study is to detect sinkhole hazards using airborne light detection and ranging (LiDAR) data. The premise is sinkholes, particularly those close to transportation infrastructure assets, could cause substantial damages to infrastructure assets, and therefore, being able to accurately and rapidly detect them is essential. However, it is expensive, time-consuming, labor-intensive, and unsafe to survey sinkholes using conventional ground observation methods. This research project was focused on developing accurate and rapid airborne LiDAR-based sinkhole detection and mapping methods, and transfer the technologies to transportation engineers for implementation and workforce development. The project team also identified best practices …

Go to article

Decision-Making Tool For Road Preventive Maintenance Using Vehicle Vibration Data, Changbum Ahn, Chao Wang, Jing Du Aug 2019

Decision-Making Tool For Road Preventive Maintenance Using Vehicle Vibration Data, Changbum Ahn, Chao Wang, Jing Du

Publications

Automated and timely road pavement damage inspection is critical to the preventive maintenance and the long-term sustainability and resilience of roads in Region 6. Current road inspection practices rely heavily on a manual process. Sensor-based methods (e.g., LiDAR scanning) are promising but can be too expensive for a wider adoption. This study employs a crowdsourcing approach of using the vibration patterns of regular vehicles in inferring specific types of road damages. A cloud-based smart phone app and system was developed to collect real-time vehicle vibrations, location data, and road damage images for training the detection model. However, there is a …

Go to article

Strategies For Prioritizing Needs For Accelerated Construction After Hazard Events, Fernando Moreu, Chao Wang, Xinxing Yuan, Laleh Ghanbari, Claudia Garrido Aug 2019

Strategies For Prioritizing Needs For Accelerated Construction After Hazard Events, Fernando Moreu, Chao Wang, Xinxing Yuan, Laleh Ghanbari, Claudia Garrido

Publications

There is a need for rapid and responsive infrastructure repair and construction after natural disaster events such as hurricanes, wildfires, and tornadoes. These natural disasters often shut down basic infrastructure systems, as experienced recently in several Region 6 states as well as in other states around the country. Accelerated construction practices are often used in these situations to speed up the traditional, and often slow, project delivery process. However, after a natural disaster, several and different types of transportation infrastructure components are in need of inspection, rehabilitation or reconstruction, and transportation agencies are challenged with the task of prioritizing these …

Go to article

Augmented Reality Enhancing The Inspections Of Transportation Infrastructure: Research, Education, And Industry Implementation, Fernando Moreu, Chris Lippitt, Dilendra Maharjan, Marlon Aguero, Xinxing Yuan Aug 2019

Augmented Reality Enhancing The Inspections Of Transportation Infrastructure: Research, Education, And Industry Implementation, Fernando Moreu, Chris Lippitt, Dilendra Maharjan, Marlon Aguero, Xinxing Yuan

Publications

Transportation infrastructure needs continuous monitoring that is conducted by field inspectors regularly in the field. Currently, infrastructure inspectors climb, measure, and photograph structures annually to inform repair needs and prioritize decisions. In order to promote and accelerate early learner's expertise in decision-making capabilities during infrastructure inspections, this research project developed various software applications using augmented reality (AR) as an inspection tool for bridges and bridge management, more specifically. By objectively quantifying infrastructure field inspections, inspectors can make more accurate field assessments and managers can make better-informed decisions. This project collaborated with stakeholders, national laboratories, DOT agencies such as NCHRP and …

Go to article

Workforce Development Symposiums For Uhpc, Brad Weldon, Craig Newtson, Grace Mcmurry, Leticia Davila Aug 2019

Workforce Development Symposiums For Uhpc, Brad Weldon, Craig Newtson, Grace Mcmurry, Leticia Davila

Publications

Ultra-high performance concrete (UHPC) is a cementitious material with a dense microstructure that contributes to high compressive strengths as well as enhanced durability properties. UHPC also possesses significant post-cracking strength and ductility due to the addition of fibers. These characteristics produce a material that provides advantages over conventional concrete; however, high costs attributed to materials and production, lack of industry familiarity and knowledge, and the absence of standardized design procedures have impeded its widespread use. To help disseminate knowledge on UHPC, two workforce development symposiums on UHPC were held in Las Cruces, New Mexico. The symposiums consisted of presentations and …

Go to article

First Prev Next Last