Transportation Engineering Commons^™

Use Of Rice Hull Ash (Rha) As A Sustainable Source Of Construction Material, Zahid Hossain, Ashraf Elsayed

Publications

With the imminent shortage of natural resources, the need to find sustainable development is the highest in recent history. Therefore, this study examines the potential uses of Rice Hull Ash (RHA) as a sustainable cementitious material (SCM) in preparation of concrete. This study also assesses the use of RHA as an alternative of commonly used polymers in preparing high-grade asphalt binders. RHA is a potential sustainable solution because it is currently being treated as an agricultural waste material, yet its high silica content makes it a potential construction material. Three different sizes of RHA (600 µm, 150 µm, and 44 …

Development Of A Self-Healing And Rejuvenating Mechanisms For Asphalt Mixtures Containing Recycled Asphalt Shingle, Marwa Hassan

Publications

The objective of this study was to test the hypothesis that hollow-fibers encapsulating a rejuvenator product could improve both self-healing, rejuvenation, and mechanical properties of asphalt mixtures. Hollow-fibers containing a rejuvenating product were synthesized via a wet spinning procedure with sodium-alginate polymer as the encapsulating material. An optimization of the production parameters for the synthesis of fibers was performed to develop fibers suitable for high-temperature and shear stress environment typical of asphalt mixture production. A self-healing experiment was conducted to evaluate the healing/rejuvenation capabilities of sodium-alginate fibers in asphalt mixtures with varying types of binders and recycled materials. Based on …

Development Of Environmentally-Friendly Stabilization Methods For Transportation Infrastructure Based On Geopolymers, Miladin Radovic, Anand Puppala

Publications

Geopolymers (GPs) have received much attention as an eco-friendly and sustainable alternative to conventional chemical additives, since they can be processed at room temperatures from aqueous solutions by utilizing waste materials (e.g. fly ash) or abundant natural sources (e.g. clay). A collaborative research study is carried out by teams from Texas A&M University (TAMU) and University of Texas at Arlington (UTA) to investigate the effectiveness of GPs for stabilizing base and subgrade materials by considering the strength and shrink-swell characteristics. Two types of clay, obtained from the North Dallas area, were mixed with a potassium-based GP synthesized from metakaolin and …

Sustainable And Equitable Financing For Pedestrian Infrastructure Maintenance, Gregory Rowangould

Publications

In many communities, pedestrian infrastructure is discontinuous, inaccessible to those with physical disabilities, and poorly maintained. Correcting these problems would be a first step in providing infrastructure to achieve the active travel and related transportation goals of many communities. One nearly universal challenge to maintaining sidewalks in a state of good repair and addressing environmental justice concerns is an adequate, sustainable, and equitable source of funding. Municipal governments across the country maintain and repair their streets and roadways; however, most require residents to maintain and repair public sidewalks adjacent to their property. These policies are difficult to enforce and may …

Bridge Deck Overlays Using Ultra-High Performance Concrete, Craig Newtson, Brad Weldon

Publications

This study investigated the use of a locally produced ultra-high performance concrete (UHPC) as an alternative to typical overlay materials. Several bond strength tests including slant-shear, splitting tension, and direct tension tests were performed to assess the bond strength between UHPC and normal strength concrete (NSC) substrate with varying surface textures. Tests were also conducted to assess the early-age and longer-term shrinkage behavior and coefficient of thermal expansion of the UHPC as well as rapid chloride permeability testing. Good bond between UHPC and NSC substrate was observed even with inadequate surface texture. Combined shrinkage and thermal effects were investigated for …

Development Of Long-Term Aging Factor For Asphalt Mixtures’ Cracking Resistance, Yucheng Shi

LSU Master's Theses

To characterize the cracking resistance of asphalt mixtures, semi-circular bend (SCB) test has been developed and subsequently accepted as a routine test in mixture design in Louisiana. However, SCB test requires specimens to be aged for five days in laboratory, which makes it not implementable in quality control (QC)/quality assurance (QA).

The primary project objective was to develop an aging factor to transfer the unaged SCB Jc to the aged SCB Jc. Specific objectives were to: (1) investigate the effect of laboratory aging on asphalt mixtures’ cracking resistance and asphalt binders’ rheological and chemical properties, (2) develop an aging …

Development Of Self-Healing Mechanisms For Asphalt Pavements, Max Abelardo Aguirre Deras

LSU Doctoral Dissertations

Self-healing mechanisms, such as microcapsules or hollow-fibers, filled with an asphalt rejuvenator present an emerging technology that would enhance an asphalt mixture’s resistance to cracking damage caused by vehicular and environmental loading. The objectives of this study were to: (a) Evaluate the effects of asphalt rejuvenators on hot-mix asphalt mixtures in order to test its effects on the fundamental engineering properties of the mixtures at high and intermediate temperatures; (b) Develop a synthesis procedure for production of microcapsules and hollow-fibers containing an asphalt rejuvenator; (c) Evaluate the self-healing efficiency of double-walled microcapsules and hollow-fibers filled with an asphalt rejuvenator, through …

Automated Merging Control Algorithm: A Cooperative Approach For Connected Automated Vehicles In Platoons, Sogand Karbalaieali

LSU Doctoral Dissertations

Transportation systems are being transformed by advanced vehicular connectivity and automation. Human-driven vehicles are being replaced by Connected Automated Vehicles (CAV). The US Department of Transportation’s (DOT) Intelligent Transportation System Joint Program Office (ITS JPO) promotes automated vehicle research which encourages the development and deployment of automated vehicles by infrastructure-based solutions. Advancements in traffic design and operation can offer solutions to the challenges that CAVs face. An example of these challenges is merging on highways where traffic operation could be enhanced by the use of Vehicle to Infrastructure (V2I) communication between the onramp and the mainline vehicles and roadside units …

Effect Of Driver, Vehicle, And Road Related Factors On Crashes At Intersections And Non-Intersections: A Naturalistic Driving Study, Grace Naa Ashley

LSU Master's Theses

Traffic accidents in the U.S. have declined over the last two decades but continue to cost the country billions of U.S. dollars each year. Intersection accidents alone account for 23% of the 32,675 deaths that occurred by motor vehicle crashes in 2014. In light of this, the first part of this study sought to identify driver behavior and secondary tasks that influenced the occurrence of a crashes at controlled, uncontrolled and non-intersections with multiple logistic regression. The second part of the study used decision tree which applied machine learning algorithms to identify significant factors that influenced the occurrence of crashes …

Operational Impact Of Shadow Evacuation On Regional Road Networks During Short-Notice Emergency Evacuations, Efe Emre Tuncer

LSU Master's Theses

As part of evacuation planning, development of effective tactical and operational strategies are essential to safely and efficiently mobilize the public away from the threat. Evacuations are classified by the time between notification and the anticipated arrival of the threat which can be categorized as short, or no-notice emergencies. Emergencies involve the computation of the time required to evacuate the area of risk, which is the time to clear a radius of up to about 10-miles around the nuclear power plant, known as the emergency planning zone (EPZ). These evacuation time estimates (ETE) also account for the evacuation of the …

Diversionary Behavior During Congestion, Venkata Vamsikrishna Peddisetty

LSU Master's Theses

Most people in the US prefer to travel on freeways, but when there is congestion they divert onto local routes to avoid travel delay. This study measures the traffic diversion induced by an increase in congestion on I-10 freeway in Baton Rouge during congestion, using a Bluetooth Detection System. The main objective of the study was to identify the difference in the level of congestion on the I-10 between the Mississippi River Bridge and the I-10/I-12 split and the level of congestion on local roads that triggers traffic to divert from the freeway to parallel arterials. Other objectives include measuring …

Field Investigation And Performance Evaluation Of Interface Bonding Between Pavement Layers, Ramendra N. Das

LSU Master's Theses

Proper bonding between pavement layers is essential to provide a monolithic pavement structure that allows distribution of loading over a larger area. Inadequate interface bonding may cause debonding or shear failure at the interface due to the accumulation of concentrated tensile stresses at the bottom of the overlay. Tack coat, a light application of asphaltic cement emulsion is applied on the existing surface to create a strong adhesive bond between pavement layers. The objectives of this study are to investigate the effects of various factors affecting bond strength between hot-mix asphalt (HMA) overlay and underlying pavement layers in the field. …

Sustained Flow Index: A Stochastic Measure Of Freeway Performance, Siavash Shojaat

LSU Doctoral Dissertations

The capacity of a road addresses its quantitative traffic carrying ability. The estimation of capacity as a parameter to assess traffic flow performance on freeway facilities has received considerable attention in the literature. Research into the traffic operation at high volumes reveals that the capacity of freeways is not a fixed number, but rather a random variable. Thus, in a stochastic approach to freeway capacity of estimation, the capacity is treated as a random variable generated from a population of flow observations, stemmed from a certain distribution function. Since the type of capacity distribution function is generally not known with …

Development Of A Mode And Destination Type Joint Choice Model For Hurricane Evacuation, Ruijie Bian

LSU Doctoral Dissertations

Since Hurricane Katrina, transit evacuation service has been seen to serve critical needs in affected cities and an increasing number of hurricanes have struck the east coast where more people rely on public transportation to evacuate. Thus, it is important to model mode choice in evacuation for a better estimation of evacuation transit demand. In this study, a joint mode and destination type choice model was estimated based on multiple post-storm behavioral surveys from the northeastern seaboard to the Gulf coast. A Nested Logit model specification was used to estimate this joint choice model. The estimated model showed significant linkage …

An Enhanced Bridge Weigh-In-Motion Methodology And A Bayesian Framework For Predicting Extreme Traffic Load Effects Of Bridges, Yang Yu

LSU Doctoral Dissertations

In the past few decades, the rapid growth of traffic volume and weight, and the aging of transportation infrastructures have raised serious concerns over transportation safety. Under these circumstances, vehicle overweight enforcement and bridge condition assessment through structural health monitoring (SHM) have become critical to the protection of the safety of the public and transportation infrastructures. The main objectives of this dissertation are to: (1) develop an enhanced bridge weigh-in-motion (BWIM) methodology that can be integrated into the SHM system for overweight enforcement and monitoring traffic loading; (2) present a Bayesian framework to predict the extreme traffic load effects (LEs) …

Application Of Surface Treatments To Improve Fuel Efficiency Of Internal Combustion Engines, Amirabbas Akbarzadeh

LSU Master's Theses

To improve the tribological performance of contacting surfaces, different surface modification methods can be employed. Surface texturing and surface coating are examples of viable techniques developed for this purpose. Surface texturing involves creating micropatterns on the contacting surfaces while surface coating requires depositing a thin layer of a suitable material on the surface(s) to improve the component’s friction and wear characteristics. The performance of textured surfaces is affected by the geometric characteristic of textures.When dealing with surface coating parameters, the parameters of interests are the type of coating materials and their thicknesses.

The current study aims to experimentally study the …

Performance Evaluation And Development Of Mechanistic Empirical Pavement Design Procedure Of Thin Rcc Pavements, Moinul Islam Mahdi

LSU Doctoral Dissertations

With the increasing shale gas exploration, agricultural and logging activities on the low volume roadways, the Louisiana Department of Transportation and Development (LADOTD) and the Louisiana Transportation Research Center (LTRC) are interested in thin applications of Roller Compacted Concrete (RCC) to be used as a design alternative for those low volume roadways having frequently heavy truck trafficking. The objectives of this research were: (1) to evaluate the structural performance and cracking failure mechanism of thin RCC pavements; (2) to develop a mechanistic-empirical based RCC pavement thickness design procedure for LADOTD to use in their low-volume pavement design.

In this study, …