Transportation Engineering Commons^™

Effect Evaluation Method Of Foamed Asphalt Based On Digital Image Processing Technology, Chang Xiaoyu

Journal of China & Foreign Highway

In view of the shortage of deter mining the optimal foaming parameters of foamed asphalt only by experience，this paper adopted digital image processing technology to collect images of the mixture of foamed asphalt and milled material RAI obtained under different foaming conditions and carried out grayscale image conversion，morphological processing，binary image conversion，and image segmentation，so as to calculate the asphalt wrapping rate in different areas.With the uniform dispersion of asphalt in the mixture as the indicator，the foaming effect of foamed asphalt was evaluated，and the optimal foaming parameters were determined.The results show that the digital image processing technology can quickly and effectively evaluate …

Study On Flexural Behavior Of Wet Joints Of Prefabricated Steel‑Uhpc Composite Bridge Deck, Liao Wancheng, Zhao Hua, An Jiahe

Journal of China & Foreign Highway

Prefabricated steel-UHPC composite bridge deck is a new deck structure system that places the longitudinal rib at the upper layer and forms PBL shear connectors.This structure can be prefabricated in the factory and assembled on-site.The adjacent steel beams are integrated by welding，and the cast in-situ UHPC wet joints connect the adjacent UHPC bridge decks.However，these wet joints represent the structure's vulnerable segments but with little research.To this end，a full-scale model test has been conducted to study the flexural behavior of the wet joints in a steel-UHPC composite bridge deck in a practical project.The Abaqus finite element model was established and verified …

Deflection Variation Rule Of Main Girder For A Concrete Cable‑Stayed Bridge Based On Combined Static And Dynamic Modification, Li Qi, Qi D Ongchun, Yang Hu, Zhao Zhiguo

Journal of China & Foreign Highway

In order to solve the problem of continuous downward deflection of the main girder for a concrete cable-stayed bridge during its service life，the deflection variation of the main girder for a long-span concrete cable-stayed bridge during its service was analyzed based on the modified model.A dual-objective optimization problem was constructed by using the combined static and dynamic finite element model modification method and was solved by the non-dominated sorting genetic algorithm （NSGA- Ⅱ）.The Pareto optimal solution set was obtained，and the coordinated optimal solution was found in the Pareto optimal solution set，so as to modify the finite element model.The calculated values …

Influence Of Aerodynamic Shape Change On Wind Resistance Performance Of Large Span Truss Bridge, Jing Dade, Su Yi

Journal of China & Foreign Highway

The development of the transportation an d tourism industry has led to bridges fulfilling additional roles，such as tourism，alongside their transportation functions，resulting in significant changes in structural aerodynamic shape and ventilation rate.This paper analyzed a double-tower single-span steel truss suspension bridge with a main span of 1 088 m，re-evaluated its wind resistance performance through the full-bridge aeroelastic model wind tunnel test，and evaluated the pedestrian comfort problem while studying the wind-resistant stability of the structure.The results indicate that the structural dynamic characteristics of the bridge remain almost unchanged before and after altering the aerodynamic shape of the bridge for its scenic spot …

Influence Of Section Selection On Mechanical Performance Of Corrugated Steel Box Culvert, Zhang Shun, Liu Baodong, Gao Meng, Wu Fei, Wang Zhihong

Journal of China & Foreign Highway

Corrugated steel box culverts exhibit a higher section utilization rate compared with circular，arched，and pipe-arch corrugated steel structures，making them more suitable for for scenarios with restricted embankment height.While numerous studies focus on strengthening strategies for corrugated steel box culverts，research on selecting cross-sectional forms is scarce.This study utilized the finite element analysis software Abaqus to develop finite element models of corrugated steel box culverts with sidewall inclination angles of 0°，5°，10°，15° and 20° respectively.The impact of these inclination angles on the structural stress and deformation outcomes was analyzed.The results indicate that increasing the sidewall inclination angles can effectively reduce vertical deformation and maximum …

Study On Anchorage Reliability For Strand Shoe And Pull Rod Of Air‑Spinning Suspension Bridge, Huang Anming, Yang Bo, Chen Long, Xie Jun, Chen Xin

Journal of China & Foreign Highway

Each strand wire of the main cable in the suspension bridge constructed by the AS method is sleeved and anchored on the strand shoes on both banks.The strand shoe transmits the strand force to the anchoring system through the pull rod.The bearing capacity of the strand shoe after the interaction between the strand shoe and the wires of the main cable，the stress state of the wires after small curvature bending，and the influence of installation accuracy of the pull rod on the anchoring reliability all need to be qualitatively and quantitatively studied and verified by the experiment.In this paper，the main cable …

Construction Technology Of Reactive Powder Concrete Prestressed Box Girder, Wang Xiaojie

Journal of China & Foreign Highway

At present，high-strength and high-performance concrete has some disadvantages，such as low flexural strength，large brittleness，and poor volume stability.Reactive powder concrete （RPC ） is a new type of material，which has good mechanical properties and high impermeability.It can reduce the amount of concrete to a greater extent and reduce the weight of the structure，achieving the purpose of safety，reliability，and cost saving.This paper applied RPC to highway prestressed box girder.Through the innovation and optimization of mix ratio，the change in traditional transportation technology，and curing technology research of steam curing shed，it effectively shortens the pouring time of RPC，ensuring the pouring quality and strength.

Key Construction Techniques For Incremental Launching And High Falling Beam Of Long‑Span Simply Supported Steel Box Girder, Wu Yanbin, Lyu Maofeng, Yin Qijia, Yu Guanqiu

Journal of China & Foreign Highway

Based on the overpass project over Beijing-Hong Kong-Macao Expressway on Changsha Pan-Pan Road，this paper proposed a construction method of large-slope walking-type incremental launching and high falling beam of steel box girder given the difficulties in busy traffic under the bridge，large pushing slope，and great total height of falling beam.After the steel box girder assembly was completed，some bridge deck ancillary facilities were constructed in advance in the preassembly yard and the weight was allocated.The steel box girder was pushed synchronously，thereby reducing the aerial work on the bridge in the later stage.During the incremental launching construction of the steel box girder above the …

Research On Gravity Anchorage Foundation Of Dadu River Bridge In Luding, Zhou Ti Ng, Tao Qiyu, Li Zejun

Journal of China & Foreign Highway

Moraine soils formed during th e Qua ternary glacial period are widely distributed in the west of China，exhibiting good mechanical properties and deep overburden.This paper studied the Dadu River bridge in Luding and investigated the influence of various foundation forms on anchorage stability in the case of considering moraine soils as the soil supporting layer of gravity anchorage foundation through theoretical analysis and numerical simulation.The findings suggest that a slant expanded foundation with a notched sill demonstrates good force-bearing capability and is cost-effective.These results can provide a reference for similar construction projects in the west of China.

Fragilit Y Analysis Of Continuous Rigid Frame Bridge With High Piers And Long Span Subjected To Near‑Field Earthquakes, Sun Yongjiang

Journal of China & Foreign Highway

Near-field earthquakes are more destructive to the continuous rigid frame bridge with high piers and long span.Based on a new-built continuous rigid frame bridge with high piers and long span，considering the seismic demand probability of bridges under near-field earthquakes，this paper utilized OpenSees to analyze the time history of the bridge.The structure response of the bridge under near-field earthquakes was obtained by the nephogram method，and the vulnerability of the bridge under earthquake was analyzed based on the curvature demand probability model of the structure.The results show that the probability response of curvature demand of a continuous rigid frame bridge with high …

Prediction Method Of Surrounding Rock Deformation Of Highway Tunnels Based On Bayes‑Lstm, Liu Zhi, Li Xinyu, Li Zhen, Kong Xianguang, Chang Jiantao

Journal of China & Foreign Highway

In the process of highway tunnel construction，the stability of surrounding rock has a great impact on tunnel construction.Therefore，the monitoring measurement and accurate prediction of surrounding rock deformation of highway tunnels are the keys to ensuring the safety of tunnel construction.In view of the low prediction accuracy and poor generalization ability of tunnel surrounding rock deformation，this paper proposed a Bayesian （Bayes ）-based method to optimize the long-term and short-term memory （LSTM ） network.The method first preprocessed the original monitoring data of crown settlement and peripheral convergence，then constructed the initial LSTM model of crown settlement and peripheral convergence of highway tunnels，and used …

Research On Shape Optimization Of Four‑Center Circular Highway Tunnel Based On Parametric Modeling Idea, Zhu Lei, Guo Meng, Guo Jinyong, Shen Caihua, Zhang Hanyi

Journal of China & Foreign Highway

The rational cross-sectional form of the four-center circular highway tunnel contributes to enhancing the stress state of the lining structure，reducing cracks in the composite lining，and enhancing the durability of the tunnel structure.Utilizing the Ansys APDL programming platform and guided by the design principle of continuous-curvature，a parametric modeling equation for the geometrical dimensions of local tunnel shape in arch foot area was established.The calculation method and numerical simulation models for the equivalent mechanical parameters of the anchor reinforcement area were also developed.The study revealed the impact of the local tunnel shape parameter design in the arch foot area on the internal …

Test On Water Mist Wrapped Dust Reduction Technology For Tunnels, Wang Yijun, Wang Fei, Jia Yuedi, Pan Weihua, He Xingchun, Yao Wenhui

Journal of China & Foreign Highway

In order to eliminate the dust produced by tunnel blasting more quickly and effectively，two kinds of mist spray and dust reduction schemes were put forward，which were the “air duct water mist wrapped type ” and the “vehicle-mounted water mist wrapped type ”.The field test was carried out on Jiaoding Tunnel in Yunnan.The results show that for the dust reduction technology scheme of “air duct water mist wrapped type ”，the dust concentration of the No.1 characteristic position at the tunnel face decreases to 3.87 mg/m3 after 10 minutes of dust reduction，which meets the specification requirements.For the dust reduction technology of “vehicle-mounted …

Numerical Simulation On Bearing Characteristics Of Tunnel‑Type Anchorage Of A Grand Bridge Over Qingjiang River, Yin Hongmei, Shi Qian, Zhang Yihu

Journal of China & Foreign Highway

This paper took the tunnel-type anchorage on the left bank of a grand bridge over the Qingjiang River as an example and established a three-dimensional geological generalization model based on the engineering geological analysis.In addition，the paper used different software to realize the approximate grid discrete division of complex rock mass and tunnel-type anchorage structure.FLAC3D software was used to simulate different working conditions，and the deformation characteristics and bearing capacity of the tunnel-type anchorage were obtained.It is found that the potential failure mode of the tunnel-type anchorage is that the anchor and the rock mass cut by the structural plane on the …

Expressway Traffic Flow Prediction Based On Data From Multiple Related Toll Stations, Zhang Yang, Yao Fangyu, Yang Shumin

Journal of China & Foreign Highway

The strong inter-economic connection makes a spatial correlation between traffic data from multiple related toll stations between urban cluster regions，and an accurate description of this connection can improve the accuracy of expressway traffic flow prediction.However，due to many uncertainties，the correlation is difficult to be captured and quantified.To solve this problem，an ATGCN-ResGRU deep learning-based expressway traffic flow prediction method was proposed.By combining attention mechanisms，three graph convolutional networks （GCN ） topological networks with high，medium，and low attention levels were constructed，and spatial learning data was obtained according to the weighted attention level of each network.The connection of multiple related toll stations was quantified and graded.At …

Study On Length Of Deceleration Lane Of Left Off‑Ramp For Urban Underground Interchanges Based On Traffic Conflicts, Wang Hailiang, Cheng Chong, Guan Hong, Ding Naikan

Journal of China & Foreign Highway

To set a reasonable range of the length of the deceleration lane in the diverge area of the left off-ramp for urban underground interchanges，the effects of the length of the deceleration lane，as well as interactions between traffic volumes and design speeds of mainline and ramp on traffic conflict in the diverge area，were exami ned.By taking the underground interchange of the Wuhan East-South Lakes Tunnel Project as an example，the VISSIM micro traffic simulation test was carried out，and the conflict rate （RCR） and exposed time to collision （TTET） were extracted.The results show that ① when the length of the deceleration lane increases，the …

Study On Safety Risk Assessment System For Waste Dump Of Mountainous Expressways, Ye Xian, Yin Hao, Zhao Xin, Wang Guanqun, Gao Yu

Journal of China & Foreign Highway

The safety of waste dump projects of mountainous expressways is related to environmental protection，water and soil conservation，highway building protection，and downstream environment-sensitive point protection，so it is necessary to put forward safety assessment methods.Based on the data analysis of 1 369 waste dumps in Yunnan Province，the safety risk factors of the waste dump engineering were proposed and summarized as five primary indicators，including site selection and design factors，construction factors，regional geological factors，external influencing factors，and data integrity factors，and 18 secondary indicators were further put forward.The group decision-making analytic hierarchy process （AHP ） model was established，and the weight of secondary indexes was determined by 64 technical …

Carbon Emission Calculation And Scheme Selection For Roadbed Drainage Ditches By Mechanized Construction, Xing Hao, Wu Jiarun, Li Han, Lin Yuliang, Guo Dongdong

Journal of China & Foreign Highway

Aligned with the peak carbon and neutrality goals，the mechanized construction of roadbed drainage ditches should consider not only construction efficiency and economic factors but also carbon emissions.This study，centered on the Meng-LYU highway，devised approaches to calculate roadbed drainage ditches' carbon emissions and investment costs across three stages：building material production，transportation，and construction.By introducing the concept of carbon trading to align carbon emissions and investment costs，a comprehensive comparison was conducted between the conventional supporting formwork method and the hydraulically powered sliding formwork method regarding equivalent carbon emissions.An orthogonal experiment was conducted involving the upper length of the roadbed drainage ditch，pouring thickness，haul distance，and construction length …

Technical Essentials Of Road Geometric Design In Serbia, Xu Da, Yang Xueyong, Yuan Yingshuang, Chen Dongsheng

Journal of China & Foreign Highway

With the continuous advancement of China's Belt and Road Initiative，more and more Chinese enterprises are participating in the construction of engineering projects in Central and Eastern Europe，which brings some challenges for designers to master and use local codes for engineering design and consultation.According to the concrete practice of road reconstruction design of Hungary-Serbia Railway （Serbia section ），the application of horizontal and vertical indexes in road geometric design in Serbian was summarized.It is found that road design in Serbian has perfect design standards and systems.The Serbian code and the Chinese code are relatively close in terms of road geometric design standards，and …

Analysis On Design Concept Of Subgrade And Pavement Of Colombia High‑Grade Highway, Liu Tao, Hu Guanhua, Yuan Yi

Journal of China & Foreign Highway

Colombian highway design predominantly adheres to American Standards，emphasizing design concepts reflective of the United States while encompassing Colombia's engineering design habits，concepts，and characteristics.This paper introduced the main design schemes of the Colombia MAR 2 Highway Project in northern Colombia，including protection engineering，drainage engineering，subgrade filling，spoil ground，and pavement.It conducted a comparative analysis between Colombian and Chinese design concepts，highlighting similarities and disparities，and put forward the thinking of mutual learning.

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

A 3-Step, Open-Data, Ride-Hailing Ridership Model With Pricing Applications, Richard A. Mucci

Theses and Dissertations--Civil Engineering

Researchers and practitioners studied the effects ride-hailing had in cities before the covid-19 pandemic. Previous research found ride-hailing to produce negative externalities, such as reducing transit ridership and increasing congestion in various cities. Since the pandemic, ride-hailing ridership has nearly recovered to pre-pandemic levels in Chicago. Ride-hailing ridership has grown steadily since the pandemic while a rider’s willingness to share their trip stagnated. Ride-hailing ridership nearly recovering to pre-covid levels in Chicago suggests that transportation planners, and policy makers, will need to continue assessing the impacts ride-hailing trips have in their cities.

Pickup and drop off locations in the Chicago …

Ground Tire Rubber As A Sustainable Additive: Transforming Desert Sand Behavior, Nabil Ismael, Dalya Ismael, Asmaa Al-Ahmad

Engineering Technology Faculty Publications

Managing waste tires presents a significant challenge globally, particularly in regions experiencing high temperatures and shortage of landfill sites. This issue is affecting countries like Kuwait, where the abundance of waste tires is a major source of environmental and safety risks, particularly during the intensely hot summer months. This extreme heat has sparked numerous fires, leading to substantial air pollution due to thick black smoke. Given the limited disposal options, recycling waste tires and finding practical applications for ground tire rubber (GTR) is essential. To address the challenge, a comprehensive laboratory testing program was conducted, using locally produced rubber aggregates …

Digitalization Of Railway Transportation Through Ai-Powered Services: Digital Twin Trains, Salih Sarp, Murat Kuzlu, Vukica Jovanovic, Zekeriya Polat, Ozgur Guler

Engineering Technology Faculty Publications

Digitalization is a key concept that transformed the various industries through technologies like Internet of Things (IoT), Artificial Intelligence (AI), and Digital Twin (DT). Although innovations provided by the advancement of digitalization have paved the way for more efficient operations and products for transportation, the rail transportation sector struggles to keep up with the rest of the transportation industry, since trains are designed to last for decades, and the insufficient infrastructure investment leads to multiple railroad derailments across the globe. Therefore, the primary aim is to transform current railway systems into human-centric, adaptable, sustainable and future-proof networks, aligning with Industry …

Examining The Effectiveness Of Oiled Ballast Water Treatment Processes: Insights Into Hydrocarbon Oxidation Product Formation And Environmental Implications, Maxwell L. Harsha, Danielle E. Verna, Yanila Salas-Ortiz, Eduardo Osborn, Eduardo Turcios Valle, Aleksandar I. Goranov, Patrick G. Hatcher, Ana M. Aguilar-Islas, Patrick L. Tomco, David C. Podgorski

Chemistry & Biochemistry Faculty Publications

Ballast water released from ships into coastal environments has been identified as a mechanism that introduces contaminants of concern into coastal ecosystems. This study investigates the treatment processes employed at a ballast water treatment facility in Valdez, Alaska, that remove hydrocarbons from unsegregated ballast water. Specifically, the aim is to quantify and characterize hydrocarbons of emerging concern, known as dissolved hydrocarbon oxidation products (HOPs) and heavy metals (HMs), throughout the treatment process. Specialized analytical techniques were employed, such as non-volatile dissolved organic carbon analysis, fluorescence spectroscopy, Fourier transform-ion cyclotron resonance-mass spectrometry, and inductively coupled plasma triple quadrupole mass spectrometry. Results …

Ethical Decision-Making In Older Drivers During Critical Driving Situations: An Online Experiment, Amandeep Singh, Sarah Yahoodik, Yovela Murzello, Samuel Petkac, Yusuke Yamani, Siby Samuel

Psychology Faculty Publications

The present study examined the impact of aging on ethical decision-making in simulated critical driving scenarios. 204 participants from North America, grouped into two age groups (18–30 years and 65 years and above), were asked to decide whether their simulated automated vehicle should stay in or change from the current lane in scenarios mimicking the Trolley Problem. Each participant viewed a video clip rendered by the driving simulator at Old Dominion University and pressed the space-bar if they decided to intervene in the control of the simulated automated vehicle in an online experiment. Bayesian hierarchical models were used to analyze …

Modeling Coupled Driving Behavior During Lane Change: A Multi-Agent Transformer Reinforcement Learning Approach, Hongyu Guo, Mehdi Keyvan-Ekbatani, Kun Xie

Civil & Environmental Engineering Faculty Publications

In a lane change (LC) scenario, the lane change vehicle interacts with surrounding vehicles. The interactions not only affect their driving behaviors but also influence the traffic flow. This study aims to model the coupled behavior of the lane changer and the follower in the target lane during LC. Large-scale real-world connected vehicle (CV) data from the Safety Pilot Model Deployment (SPMD) program are used to extract LCs and study vehicle interactions. A multi-agent Transformer-based deep deterministic policy gradient (MA-TDDPG) method is proposed to model the coupled behaviors during LC. The multi-agent framework can handle the multiple agents’ behaviors with …

Implications Of Alternative Communications And Sensing Technologies For Implementing Variable Speed Limit Control Through Connected Vehicles: Sag Curve As A Case Study, Reza Vatani Nezafat, Mecit Cetin, Elizabeth Williams, George F. List

Civil & Environmental Engineering Faculty Publications

Connected vehicles (CVs) will enable various applications to improve traffic flow. This paper's focus is to investigate how the potential implementation of variable speed limit (VSL) through different types of communication and sensing technologies on CVs makes it possible to mitigate congestion at a sag curve bottleneck. A VSL algorithm is developed and implemented in a simulation environment for controlling the inflow of vehicles to a sag curve to minimize delays and increase throughput. Both vehicle-to-vehicle (V2V) and infrastructure-to-vehicle (I2V) options for CVs are investigated when implementing the VSL control strategy in a simulation environment. Also, for measuring traffic density …

Contribution Of High Turbidity To Tidal Dynamics In A Curved Channel In Zhoushan Islands, China, Li Li, Fangzhou Shen, Zhiguo He, Gangfeng Ma, Jiachen Wang, Kailong Huangfu

Civil & Environmental Engineering Faculty Publications

The curved tidal channel, Luotou Deep-water Navigational Channel, is the main channel of the Ningbo Zhoushan Port, which is ranked first in the world. Tidal dynamics in the channel are spatially and temporally asymmetric. In this study, the three-dimensional tidal dynamics in the channel were analyzed using field data and simulated using FVCOM. The results show that the tides in the channel flood/ebb along the northern/southern bank near the bottom/surface layer and these asymmetries are due to the imbalanced Coriolis force, centrifugal force, sea-level gradient, and density gradient. Residual current velocity peaks (0.7 m/s) in the middle of the channel …

Railroad Condition Monitoring Using Distributed Acoustic Sensing And Deep Learning Techniques, Md Arifur Rahman

College of Graduate Studies: Theses & Dissertations

Proper condition monitoring has been a major issue among railroad administrations since it might cause catastrophic dilemmas that lead to fatalities or damage to the infrastructure. Although various aspects of train safety have been conducted by scholars, in-motion monitoring detection of defect occurrence, cause, and severity is still a big concern. Hence extensive studies are still required to enhance the accuracy of inspection methods for railroad condition monitoring (CM). Distributed acoustic sensing (DAS) has been recognized as a promising method because of its sensing capabilities over long distances and for massive structures. As DAS produces large datasets, algorithms for precise …