Transportation Engineering Commons^™

Semi-Flexible Pavement Structure Analysis Based On Double Modulus Theory, Pan Qinxue, Zhou Shurui, Hu Jia, Zhang Long, Song Xiaojin, Liu Hongfu

Journal of China & Foreign Highway

Semi-flexible pavement materials have significant differences in tension and compression.If the mechanical response analysis of pavement structures is conducted by using the traditional linear elastic theory with a single modulus,there will be a considerable deviation from actual situations.To analyze and optimize semi-flexible pavement structures,this paper compared the changes in key mechanical responses of pavement structures under six different semi-flexible layer positions and thickness combinations based on the double modulus theory.The results show that there is a significant difference in the calculation results of key mechanical responses of the pavement based on the double modulus theory and the single modulus theory,with …

Structural System Reliability Analysis Method For Cable-Supported Bridges Based On Deep Belief Networks, Chen Zhenyu, Xie Bo, Lu Naiwei

Journal of China & Foreign Highway

Aiming at the high-precision reconstruction of structural function functions caused by the strong nonlinearity of cable load-bearing bridge structures,this study presented a structural system reliability analysis method based on a deep belief network (DBN ).A long-span suspension bridge was used as the engineering background to identify the dominant fault path of the structural system and analyze the law of structural fault path transfer caused by the deterioration of the suspender strength.Numerical analysis results show that DBN can capture the nonlinear mechanical behavior of the finite element model of the suspension bridge,thereby making the implicit statically indeterminate functional function explicit and …

Experimental Study On Engineering Performance Of Post-Planted Precast Concrete Pile With Prebored Grouting, Zhao Yu, Wang Wei, Jiang Lei, Song Zhenya, Zhang Hao

Journal of China & Foreign Highway

The traditional piling methods of precast concrete (PC) piles are difficult to pass through the hard soil layers and tend to induce severe soil squeezing effects.To address this issue,the technology of a post-planted PC pile with prebored grouting was analyzed.Based on the project of the Hefei‒ Zongyang section of G3W Dezhou ‒ Shangrao Expressway,the bearing characteristics of post-planted PC piles were researched by the load tests of five piles in two different field test sections.The results show that the bearing capacity of the PC piles can be effectively improved by setting the cement mortar coating layer around the PC piles.The …

Research On Evaluation Index Of Low-Temperature Semi-Circular Bending Test Of Asphalt Mixtures, Lyu Songtao, Chen Qi, Lu Weiwei, Zhao Pei, Wang Jinping

Journal of China & Foreign Highway

This article aims to investigate the low-temperature crack resistance performance of asphalt mixtures under different aging conditions and loading rates and select appropriate indicators to accurately characterize and quantify their performance.Based on the semi-circular bending test,the influence of different aging degrees (unaged,short-term aged,long-term aged for three days,and long-term aged for five days ) and loading rates (50 mm/min,5 mm/min,0.5 mm/min,and 0.1 mm/min ) on the low-temperature performance of asphalt mixtures was investigated.The evaluation effect and applicable range of five crack resistance performance indicators,namely fracture energy (Gf),stress intensity factor (KIC),flexibility index (IFI),crack resistance index (ICRI),and balanced cracking index (IBCI),were studied through …

Research On Pavement Crack Segmentation Based On Swin-U, Wang Hua, Wang Liangcai, Xiong Feng, Hu Jing

Journal of China & Foreign Highway

To address the issues of overfitting,low computational speed,and insufficient target information extraction in pavement crack segmentation tasks,this study proposed a Swin-U network model based on the U-Net architecture.The model adopted the Swin-Transformer as the feature extraction module to enhance the model ’s fitting capability and enable more accurate crack feature extraction,thereby enhancing segmentation accuracy.Additionally,a stable loss function,Focal Loss,was introduced to improve the accuracy of target segmentation.Experiment results on a proprietary pavement crack dataset show that the Swin-U network model achieves pixel-level segmentation of crack images and significantly outperforms the traditional U-Net.On the test set,it improves the intersection over union and …

Long-Term Water P Ermeability Performance Of Asphalt Mixtures Under Wide-Scope Void Ratio, Chen Sanxi, Guan Hongxin, Yao Ming, Mo Zhiwei, Jiang Wangheng

Journal of China & Foreign Highway

In order to compare the water pe rmeability performance of asphalt mixtures with different void ratios after scouring and clogging,self-developed equipment was adopted to conduct vertical water permeability tests,dynamic water scouring-based water permeability tests,water pressure tests,and simulated clogging tests on semi-open-graded DK- 13 mixtures with void ratios of 9%,11%,and 13%,as well as open-graded PA- 13 mixtures with void ratios of 15%,17%,and 19%.The experimental results show that:① The water permeability performance of the asphalt mixture becomes better as the void ratio increases.The water permeability coefficient changes relatively small after the void ratio of the asphalt mixture reaches 15%,which is attributed to …

Research On Key Construction Monitoring Technology Of Long-Span Skewed Arch And Curved Beam Bridge, Xu Yufeng, Zhang Zhantao, Xie Yunfei, Li Zihui

Journal of China & Foreign Highway

As a new structure with sloping arch ribs and curved main beams,a skewed arch and curved beam bridge markedly differs from the conventional bridge in construction monitoring technology due to its complex structure and prominent spatial effect.To investigate the key technology in construction monitoring,this study took a long-span skewed arch and curved beam bridge as the engineering background and discussed construction process simulation analysis,field monitoring,and parameter identification and adjustment of the bridge.The results show that the plate-shell unit model has higher calculation accuracy and can comprehensively show the stresses in all directions of the bridge compared with the beam element …

Study On Aerodynamic Optimization Of Π-Shaped Cable-Stayed Bridge With Vortex-Induced Vibration In Mountainous Areas, Zeng Min, Liu Hanyun, Mao Na, Chen Baixiang, Han Yan, Li Chunguang

Journal of China & Foreign Highway

Given vortex-induced vibrations of bridges caused by high wind attack angles in mountainous canyons,this study investigated the vortex-induced dynamic characteristics of a Π-shaped steel-concrete composite beam cable-stayed bridge in a mountainous canyon under high wind attack angles based on wind tunnel tests and examined aerodynamic measures for vortex suppression.Firstly,a finite element model of the bridge was established,and the dynamic characteristics of the bridge in both the completed and construction states were analyzed.Subsequently,a 1∶50 scale detailed segment model was designed based on similarity theory to analyze the vortex-induced vibration performance of the original main beam under conventional wind attack angles of …

Wind Tunnel Experiment On Wind-In Duced Vibration Performance Of Arch-Shaped Inclined Steel Bridge Tower In Construction Free-Standing State Using Ae Roelastic Model, Xu Peijun, Deng Fei Yun, Chen Shixuan, Zhang Jiren

Journal of China & Foreign Highway

This paper presented a wind tunnel experimental study on the wind-induced response characteristics of a rectangular-sectioned arch-shaped inclined steel bridge tower during the construction free-standing stage.A 1:50 scaled aeroelastic model was employed to conduct experiments at different wind yaw angles β (0°‒180°).The experimental results indicate:① under the uniform flow field,the tower in its free-standing state does not experience galloping when the bridge ’s wind speed reaches 60 m/s;② under the uniform flow field,the tower exhibits bending vortex-induced vibrations (VIVs ) along the bridge direction or transverse to the bridge direction.However,the amplitudes of the tower top displacements associated with these VIVs …

Numerical Simulation Study On Scour Erosion Of Bridge Pile Foundations In Service, Wang Shang, Mi Jiangchuan, Chen Mingtao, Song Dan, Zhang Qiao, Zhang Yong, Wang Weixiao

Journal of China & Foreign Highway

Bridge pile foundations in servic e are subjected to long-term scour erosion caused by sediment-laden water flow,leading to a gradual expansion of the eroded and worn areas.This in turn results in varying degrees of damage to the pile foundation structure and reduces the durability and safety of the bridge.In order to study the impact of scour erosion on bridge pile foundations,this study took the Hanjiang No.1 Bridge in Ankang City as the research object.The ANSYS FLUENT software was used to conduct three-dimensional numerical simulations of the pile foundation and analyze the distribution characteristics and patterns of scour erosion under different …

Research On Influence Of Shield Synchronous Grouting Parameters On Surface Deformation, Luo Xu, Zhang Zhaofeng, Fu Helin, Cao Guiqian, Zhao Chuanming

Journal of China & Foreign Highway

In order to determine reasonable grouting parameters,control surface settlement,and reduce the risk of excessive surface settlement caused by irrational synchronous grouting parameters,this study studied the shield tunnel project between maglev T 2 station and maglev T 3 station.A numerical simulation method was adopted to study the influence of grouting pressure,grouting volume,and the elastic modulus of slurry on surface deformation.The results show that the tunnel synchronous grouting has a significant effect on surface settlement control.A greater grouting pressure,equivalent grouting layer thickness,and elastic modulus of slurry mean a smaller surface settlement.As the three parameters increase,the variation range of surface settlement decreases and …

Intelligent Vehicle Path Tracking Control Integrating Road Adhesion Constraints, Zhang Zhiguo, Wang Pu, Zhang Xinglong, Wang Yan

Journal of China & Foreign Highway

In the field of fault-tolerant control for intelligent vehicle path tracking,the existing methods based on model predictive control (MPC ) have limitations.They often assume that the vehicle model parameters are fixed and ignore the impact of dynamic changes in model parameters,which are caused by factors such as vehicle load changes and external environmental interference,on the path tracking accuracy.When the steering system fails,the front wheel steering angle commands calculated by MPC cannot be directly executed and need to be converted into yaw moment control.Although the existing sliding mode yaw moment control methods have strong robustness,the chattering problem affects the stability and …

Research On Parametric Method Of Highway Bim Based On Digital Delivery, Li Jinlong, Wang Xinnan

Journal of China & Foreign Highway

By analyzing the application points and the current situation of digital delivery in each stage of highway engineering construction,this study found that the lack of parameter management and definition in the modification and refinement process of building information modeling (BIM ) source files at each stage led to difficulties in the splitting and refinement of BIM at each stage and even the need for reconstruction.To this end,a method for strengthening the overall planning of the whole life cycle was proposed.By clarifying the demand for model parameters according to the application points of each stage,a mechanism for parameter reservation and classification …

Reconstruction Plan Of Small-Spacing Interchange Connection Sections On Expressway : A Case Study Of Xinlong‒Gangkou Interchange On Zhongshan‒Jiangmen Expressway, Jie Qiang, Fu Xinsha

Journal of China & Foreign Highway

The plan design for the small-spacing interchange connection on the expressway directly affects operational efficiency and driving safety.To achieve the conversion of traffic flow between different expressways,this study explored the reconstruction plan of the connection section under the condition that the interchange spacing did not meet the Design Specification for Highway Alignment (JTG D20‒2017 ) and investigated two connection schemes,including auxiliary lane and collector-distributor lane by taking the Xinlong –Gangkou interchange of the Zhongshan‒Jiangmen Expressway reconstruction and expansion project as an example.The results show that the auxiliary lane is recommended in consideration of the long-term service level,speed coordination,operational efficiency,and engineering …

Design Of Champlain Bridge In Canada, Xie Yaning, Zhou Yanfeng, Marwan Nader

Journal of China & Foreign Highway

The Champlain Bridge,an iconic gateway spanning the St.Lawrence River in Montreal,showcases not only the excellence of engineering but also becomes an integral part of the city ’s landscape.With a main span of 240 m,the bridge employs a unique single-pylon harp-shaped double-plane cable-stayed structure.The upper pylon is inspired by a tuning fork in its lateral design,while the upper crossbeam artfully mimics the shape of a bow tie,endowing the bridge with a visual beauty that harmoniously blends elegance and strength.The bridge deck,with a total width of 60 m,was the widest double-plane cable-stayed bridge in the world when it was completed.The typical spans …

Research On Bridge Jacking Decision Based On Carbon Emission Analysis, Zhang Xinmin, Hu Chengze, Gao Hongbo, Yang Yunping, Sun Zhihong, Cao Hongyou

Journal of China & Foreign Highway

To lift the longitudinal section of existing bridges in highway reconstruction and expansion projects due to insufficient under-bridge clearance,this study took the reconstruction of a 32.5 m T-beam bridge in the reconstruction and expansion project of the Guangzhou‒Shenzhen Expressway as the research object.By using a carbon emission factor method,carbon emissions of three reconstruction schemes,including broken-column jacking,conversion of bearing pads into bridge piers,and demolition and reconstruction,were calculated under different lifting heights,and the corresponding construction and installation costs were compared.The results show that when the longitudinal section of the bridge is lifted to a certain height,the economic benefits of the broken-column jacking …

Research On Rc-Uhpc Composite Slab Frame Culvert Technology In Wave-Affected Areas, Qiu Junfeng

Journal of China & Foreign Highway

To address the problems in the construction of offshore bridges and culverts such as the structures susceptible to waves,limited layout,and high cost of soft foundation treatment,this paper proposed a new technical solution for reinforced concrete and ultra-high performance concrete (RC-UHPC ) composite slab frame culverts.With supporting engineering,the ordinary box culvert was selected as a comparison scheme for technical and economic analysis,and the design points and construction procedures of new structures were introduced.Based on the calculation results of the overall bearing force,the bearing performance of the top slab under different load conditions was analyzed,along with an investigation of the secondary internal …

Inverse Analysis Of Thermal Parameters Of Concrete Box Girder Based On De-Bp Neural Network, Yao Yong, Yan Yu, Sun Bo Wen, Wang Yuesong, Jiang Tianyong

Journal of China & Foreign Highway

In view of temperature cracks in concrete box girders easily occurring during construction,an inverse analysis method based on uniform design theory and differential evolution back propagation (DE-BP ) neural network was proposed to accurately obtain the thermal parameters of concrete box girders and ensure the reliability of temperature analysis of concrete box girders.This method established the nonlinear relationship between the temperature peak of characteristic points and the thermal parameters through the DE-BP neural network.By using the uniform design method and the Abaqus finite element numerical model,130 sets of sample data were generated.Based on the ratio of 12∶1 for training samples …

Field Test Research On Optimization Of Smooth Blasting Parameters Based On Drilling Speed, Wang Haitao, Lu Jianghua, Liu Yang, Huang Mingli, Wu Xuan

Journal of China & Foreign Highway

This study aims to address poor adaptability and timeliness in the design of smooth blasting hole parameters in t he past.With the drilling and blasting method-based construction of large cross-section tunnels in Botanggou and Tielugou along the Zunhua‒Qinhuangdao Expressway as the research background and Ⅲ and Ⅳ grade surrounding rocks of porphyritic granite as the research object,statistical regression analysis and theoretical derivation were conducted on the measured data during on-site drilling according to the rock solidity coefficient.Based on this,a simple parameter design method for a smooth blasting layer based on the drilling speed index of an air leg anchor rod …

Distribution Characteristics Of Internal Distress And Maintenance Decision-Making For Asphalt Pavement Based On Three-Dimensional Ground-Penetrating Radar, Li Xiaohua, Song Liang, Ye Wei, Xie Xiaodong, Yang Jiangang, Gao Jie

Journal of China & Foreign Highway

The distribution characteristics of internal distress in pavement structures and the corresponding maintenance decisions are crucial for improving road performance and extending service life.Based on three-dimensional ground-penetrating radar (3D GPR ) technology,this study investigated the internal distress of a 12-kilometer section of both driving and overtaking lanes of an expressway in Hubei Province.High-resolution images of internal pavement distress were obtained,and milling maintenance decisions were optimized by employing these images and a modular decision-making model.Through an efficient and non-destructive technique,the distribution characteristics of internal pavement distress were analyzed,and potential distress types were identified,providing a scientific basis for maintenance decision-making.Data analysis revealed …

Impacts Of Cognitive Workload On Veteran Driver Reaction Time: Predictive Modeling Using Bayesian And Machine Learning Methods, Kenneth Ofosu-Kwabe

All Theses

In high-demand environments, the ability to manage cognitive workload can mean the difference between optimal or safe performance and critical failure or accidents. Veterans face an elevated risk of fatal motor vehicle accidents due to post-deployment stress, combat-related injuries, and challenges readjusting to civilian driving. This study explores how cognitive workload affects reaction time performance using a driving simulator by collecting and analyzing subjective workload ratings (using the NASA-TLX survey), physiological signals from eye-tracking and performance data from a sample of 28 Veterans.

We examined how task difficulty, cognitive indicators and personal attributes influence reaction times across an interactive driving …

Drainage Area Limitations Of Single Watershed, Peak Flow Estimates From Nrcs Methods, Timothy A. Maughan, Rollin H. Hotchkiss, Riley Hales

Nebraska Department of Transportation: Research Reports

Most state Department of Transportation roadway design sections predict peak flow for culvert design using, amongst other approaches, Natural Resources Conservation Service (NRCS) TR-20 technology. Even though this technology is more than 50 years old, there are no clear guidelines for how large a single watershed drainage area may be while remaining appropriate for predicting peak discharge with this method. Our objective was to identify the drainage area where TR-20 peak flow predictions significantly deviate from flow frequency predictions. We developed flow frequency estimates for 130 small-area stream gage sites in rural Nebraska and compared the calculated return period discharges …

Comparison And Evaluation Of Overlay And Leveling Binder In Traffic Circle Construction, Pratik Neupane

Graduate Theses and Dissertations (2019 - present)

Traffic circles play a vital role in managing traffic flow and ensuring safety, yet their unique traffic conditions make them prone to early cracking and deformation. This study evaluated the performance of overlay and leveling binder asphalt mixtures for a reconstructed traffic circle at the University of South Alabama, using plant-mixed laboratory-compacted (PMLC) specimens. Volumetric analyses were performed to determine maximum specific gravity (Gmm), bulk specific gravity (Gmb), and air voids content. Laboratory tests were conducted on both the overlay and leveling binder layers using indirect tensile cracking test (IDEAL-CT) and indirect tensile rutting test (IDEAL-RT) to assess cracking tolerance …

Development Of A Microcontroller-Based Intelligent Traffic Light Control System For Vehicular Movement In T-Junctions, Frederick O. Ehiagwina

Tanzania Journal of Engineering and Technology (TJET)

This research is devoted to the issue of regulating traffic congestion in major cities using light-dependent resistors coupled with the PIC16F877A microcontroller. This study proposes an intelligent traffic control system for T-Junctions, utilizing sensing and control to optimize traffic flow through dynamic phase adjustments and congestion reduction, enabled by a microcontroller-based decision-making system. The proposed system reduces traffic congestion, automates control, and enhances safety, minimizing accidents and lowering infrastructure costs. Under simulated environment, it demonstrates an average response time of 50 ms and achieves 99% accuracy in displaying the correct countdown. Finally, the number of state transitions handled per minute …

Smart Highway Construction Site Monitoring Using Artificial Intelligence, Mehran Mazari, Yahaira Nava-Gonzalez, Ly Jacky N. Nhiayi, Mohamad H. Saleh

Mineta Transportation Institute

Construction is a large sector of the economy and plays a significant role in creating economic growth and national development,and construction of transportation infrastructure is critical. This project developed a method to detect, classify, monitor, and track objects during the construction, maintenance, and rehabilitation of transportation infrastructure by using artificial intelligence and a deep learning approach. This study evaluated the performance of AI and deep learning algorithms to compare their performance in detecting and classifying the equipment in various construction scenes. Our goal was to find the optimized balance between the model capabilities in object detection and memory processing requirements. …

Static Performance And Stability Of A Multi-Span Hybrid Continuous Rigid Frame Bridge With High Piers, Huang Yu, Liu Guanyu, Yi Jianbo, Xing Xuan, Su Miao, Peng Hui

Journal of China & Foreign Highway

In order to study the static performance and stability of a steel-concrete composite continuous rigid frame bridge in Suichang,Zhejiang Province,a single girder and girder lattice finite element model for the whole bridge was established by using Midas Civil,and a local solid finite element model was established by using Ansys.A detailed analysis of the structural displacement and stress state of the bridge in use and the local stress in the solid section of the pier and girder under different loads was carried out.The influence of the pile-bottom restraint stiffness and pier-girder connection form on the overall stability of the bridge was …

Influence Of Train Speed On Thermal Insulation And Anti-Thawing Length For Tunnel In Cold Region, Huang Huanan, Chen Yong, Wang Yibo, Wu Yaping

Journal of China & Foreign Highway

To study the influence of train speed on thermal insulation and anti-thawing measures for surrounding rock of tunnels in cold regions,it is necessary to analyze the temperature field.By using the Kunlun Mountain Tunnel Project in cold regions as a case study,the effects of external atmospheric temperature,piston wind effects caused by varying train speeds,and the driving resistance on the distribution of the tunnel ’s internal temperature field were considered.A three-dimensional numerical calculation model including the surrounding rock,concrete lining,and tunnel air was established by utilizing the thermo-fluid-structure interaction (TFSI ) technique.The thermal environment variations caused by trains at different speeds were predicted.The …

Parametric Analysis Of Composite Slab With Steel Bar Trusses At Construction Stages, Zhang Junhao, He Jun, Tan Chao, Feng Sidong, Wang Zitong

Journal of China & Foreign Highway

To clarify the structural behavior of composite slab with steel bar trusses at key construction stages including hoisting and concrete post-pouring,a composite beam bridge with a main span of 60 m in Georgia ’s E60 Highway was investigated.A finite element model was developed by using ABAQUS to simulate the construction process and analyze the influence of parameters such as prefabricated bottom slab material,number of hoisting points,slab thickness,and number of steel bar trusses on the principal stress of concrete and mid-span deflection.The results indicate that ultra-high-performance concrete (UHPC ) prefabricated bottom slabs prevent plastic damage and enhance slab stiffness.Normal concrete (NC) …

Cracking Characteristics Of Cement-Stabilized Macadam With Early Strength Agent Under Variable Temperature And Humidity Curing Conditions, Ge Dongdong, Liu Dingyuan, Lyu Songtao, Jiang Xiangyang, Xue Yanhua, Yu Yang

Journal of China & Foreign Highway

In environments with large temperature variations and low humidity,the curing conditions of cement-stabilized macadam fail to meet the specifications,leading to slow early strength development and increased susceptibility to cracking.This study aimed to investigate the effects of actual environmental temperature,humidity,curing age,and addition of early strength agents on the cracking characteristics of cement-stabilized macadam.Variable temperature conditions were determined based on actual environmental temperature data.Four curing conditions were set by combining temperatures (variable temperature and standard temperature ) with relative humidity of 95%,80%,and 65%,respectively.Three types of specimens were prepared with 0%,10%,and 15% early strength agent contents and cured for 14 and 28 days,respectively.The …

Identification And Prediction Model For Traffic Blockage State Of Highways To Xizang, Wu Ling, Liu Jianbei, Zhang Zhiwei, Shan Donghui, Chi Gandu

Journal of China & Foreign Highway

To identify the traffic blockage state on highways to Xizang in extreme environments,comprehensive evaluation indicators for traffic blockage state based on the entropy-weighted TOPSIS method were proposed by using the traffic blockage event parameters observed on four major highways to Xizang:Sichuan ‒ Xizang Highway,Yunnan ‒ Xizang Highway,Qinghai ‒ Xizang Highway,and Xinjiang ‒ Xizang Highway.The K-Medoids clustering algorithm was used to categorize the traffic blockage state into different levels.By considering factors such as hazard types,road types,traffic volume,and vehicle type ratios,a classification model for the traffic blockage state on highways to Xizang was constructed based on machine learning algorithms.The results show that …