Transportation Engineering Commons^™

Design And Evaluation Of Land‑Saving And Beautiful Median Barriers, Li Jingjun, Wa Ng Xin, Qi Jie, Wang Zijian, Liu Siyuan

Journal of China & Foreign Highway

During the construction and expansion of expressways and national and provincial highways，more diversified requirements have been put forward for the median barrier，including reliable protective performance，small footprints，beautiful traffic environments，and economic costs.However，the existing median barrier achievements still have some shortcomings.In order to better meet the design and use needs of median barriers for highways，theoretical analysis，computer simulation，and full-scale impact tests with real vehicles were adopted，and the force characteristics of different types of median barriers were analyzed.A new design concept of beam-column integration was put forward.Through systematic research on the barrier height，width，beam，column，foundation，and other structures，a land-saving and beautiful median barrier was developed.The median barrier had …

Guardrail Improvement For Old Bridges In Expressways, Liu Xinping, Zhang Shihui, Shang Zhongping, Han Yue, Zhang Qiang

Journal of China & Foreign Highway

In view of the insufficient protection grade of the guardrail in old bridges，a combined guardrail suitable for the low concrete wall guardrail in the old bridge was designed and developed by using finite element analysis while not damaging the main structure of the bridge.The protection grade was verified to reach SA grade through a full-scale vehicle collision test.The guardrail was designed with new high-strength alloy steel，with light weight and beautiful appearance.There was no need to dismantle the original concrete foundation in the old bridge，which is convenient for construction and requires low cost.Therefore，it is worth being popularized and applied in the …

Research And Field Test On Ultra‑Thin Wearing Course Based On Balanced Design Concept, Gu Jianjun, Li Xia, Li Atan, Sun Qiang, Li Jie, Jiang Zhaowei

Journal of China & Foreign Highway

To address the application of an ultra-thin wearing course in expressway asphalt pavement maintenance engineering，the ultra-thin wearing course system based on the balance design concept was systematically studied.In this paper，the action mechanism and application characteristics of modifiers were analyzed，and the proportion design test of the ultra-thin wearing course was designed based on the balance design method.Finally，according to the proportion design test，the optimal proportion of the ultra-thin wearing course material was selected for test road paving.Research shows that the direct-cast high viscosity modifier is convenient for transportation and storage，improves the elastic recovery of asphalt mixtures and reduces permanent deformation.Under the condition …

Intelligent Bridge Lifecycl E Maintenance System Based On Long‑Term Inspection, Ye Zhiwei, Zhang Jiaxin, Tan Haishan, Fan Lei, He Wen, Dong You, Wu Wanglin

Journal of China & Foreign Highway

The current bridge maintenance sy stem in China primarily relies on bridge inspection data to prioritize the state of bridges and allocate a limited budget accordingly.This strategy focuses on repairing bridges with low performance，concentrating on restorative maintenance but ignoring preventive maintenance.In view of the total lifecycle cost，the repair-oriented method may require a lower initial investment but leads to significant resource consumption in the mid to late stages.Based on existing highway bridge maintenance systems，an intelligent maintenance system relying on Chinese standards and bridge inspection data and combining repair and prevention was developed.The system model mainly consisted of two modules：the bridge performance …

Improvement Of Gravelly Laterite And Cement Stable Disposal In West Africa, Jin Haibing, Yi Zicheng, Zhuo Rong

Journal of China & Foreign Highway

Owing to poor gradation and high liquid limit and plasticity index，the application of gravel laterite on road paving is limited in West Africa.To overcome this issue，laterite granule combined with sand at different content was explored.The performance including the particle composition，limit water content and CBR value was investigated.The results indicate that sand treatment can improve the gradation，enhance the compactness，and reduce the plasticity index.The improved gravel laterite can meet the requirements of subbase，cushion，and base courses.Cement treatment can improve the mechanical properties of laterite grains.Cement and sand content affect the unconfined compressive strength significantly，with an optimal sand content range identified.Specifically，laterite granules mixed with …

Dynamic Impact Testing And Numerical Analysis Of Non-Proprietary Astm F2656-20 M50 Anti-Ram Barrier Components, Weston Kelley

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In a post-9/11 world, hostile actors are using vehicles as weapons to inflict civilian casualties. Pedestrians, vulnerable road users, military personnel, and police may be targeted using a vehicle as a weapon. The United States Department of Defense (DoD) also utilizes Entry Control Facilities (ECFs) which are carefully designed transportation corridors to manage how threat vehicles are able to access military facilities. In 2004, DoD started to upgrade all ECFs using both passive and active barriers. Many anti-ram vehicle barriers were evaluated according to the criteria established in ASTM F2656, but to date few options are available which are (1) …

Safety Evaluation Of Hawaii Dot Modified Type A-1 Flared Buried In Backslope Guardrail End Terminal, Sina Changizian

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The Hawaii Department of Transportation (HDOT) desired to evaluate the crashworthiness of a guardrail end terminal design in which the upstream guardrail anchorage was connected to a block partially buried in a cut slope, known as a “Buried in Backslope” or BIB design. The HDOT BIB system used an upper W-beam with 8-in. deep blockouts attached to W6x9 steel posts and a lower W-beam rubrail located 3 in. below the upper rail. The system used two horizontal flares: 7.4:1 near the upstream anchor block and a 13:1 flare through the ditch.

Critical impact points (CIPs) were identified and recommended for …

Study On Treatment Method Of Expansive Soil Embankment In Expressway Reconstruction And Extension, Wang Yuwei, Hu Yanli, Zhang Rui

Journal of China & Foreign Highway

In order to fully utilize expansive soil as filler in highway reconstruction and expansion projects，this paper draws on the successful experience of using expansive soil directly in road construction.It proposes an embankment treatment scheme that involves the use of geogrid-reinforced expansive soil with edge wrapping，based on the reconstruction and expansion project of the Hefei to Dagudian section of the G 40 Shanghai-Shaanxi Expressway.Through laboratory tests，the road performance and swelling characteristics of the expansive soil filler were investigated to determine the applicable scope and compaction control indices of the filler.Then，the feasibility of the embankment treatment scheme was demonstrated through the prediction …

Research On Construction Risk Of Desert Highway Subgrade Engineering Based On Sem, Wang Shouxu, Han Lingyun

Journal of China & Foreign Highway

Highway construction in desert areas is of great significance to improving the nodes of transportation networks and developing the economy of remote areas.In order to effectively explore the construction risks of desert highway subgrade engineering，the five aspects of personnel risk，technical risk，material risk，mechanical risk，and environmental risk were analyzed，and 23 indicators affecting the construction risk of desert highway subgrade engineering were screened out by literature research method.Based on the effective data collected by questionnaire survey，a structural equation model （SEM ） of the construction risk of desert highway subgrade engineering was constructed，and the key influencing factors of the construction risk were analyzed.The results …

Lightweight Replacement Technology For Existing Soft Subgrade Based On Over‑Consolidated State, Huang Baotao, Zhang Mudan, Huang Xiangshuo, Fang Mingshan, Feng Jianxue, Huang Lizhen

Journal of China & Foreign Highway

In order to solve the differential settlement of soft subgrade in coastal areas，based on the elastic deformation theory of overconsolidation stress ratio，the calculation and analysis of artificial overconsolidation stress ratio and the new technology of lightweight replacement were carried out to reduce the additional stress of vehicle load and structure weigh.The results show that the replacement thickness of the lightweight material with suitable density can make the additional stress at the bottom of the subgrade less than the deadweight stress of the original soft soil，and the additional stress is less than the initial flow stress of the soft soil.The resulting …

Analysis Of Stress And Drainage Characteristics Of Water Film Between Tire And Road Surface And Influence Of Groove Parameters, Sun Zhenhao, Chen Jun

Journal of China & Foreign Highway

In order to study the stress characterist ics of water film on cement concrete road surface under the action of the tire and the influence of grooves，the finite element model of tire-water film-road surface was constructed using SolidWorks and Ansys Workbench.Based on computational fluid dynamics （CFD ） control equation and fluid-structure coupling theory，the flow law of water film on road surface under the action of the tire and the influence of water film thickness，driving speed，groove width，groove spacing，and groove direction on the hydrodynamic lift of tire were analyzed.The results show that the hydrodynamic lift of the tire increases with the increasing …

Rut Development Law And Correction Factor Of Axle Load Conversion Of Asphalt Pavement In Long And Large Longitudinal Slope, Guo Chenchen, Ding Tingting, Lyu Xin, Sun Jianxiu, Zhang Jizhe, Yao Zhanyong

Journal of China & Foreign Highway

The existing design specifications do not make special design provisions for pavements in long and large longitudinal slopes，and the directly applied design specifications ignore the stress characteristics of these pavements，which fail to guarantee pavement performance and life.In order to realize the differential design of the pavement structure of special road sections，based on the measured dynamic modulus of asphalt mixture，annual traffic volume，and temperature data，this paper used the self-developed temperature-axle load analysis software to convert the real traffic volume into standard axle load.Abaqus software was used to establish a rut model under the coupling effect of measured axle load and temperature，and the …

Mechanical Behavior Of Composite Structures Of Wearing Course And Underlying Layer For Asphalt Pavements, Yang Xiaohua, Yuan Zhanwen, Wen Yongbing, Zhou Chao, Wu Hao

Journal of China & Foreign Highway

The interlayer bonding state of pavement structures changes due to the influence of various factors under service conditions，and this change exhibits a significant influence on the mechanical behavior of pavement structures.Through the composite structure test and numerical analysis，the mechanical behavior of the composite structure of different wearing courses and underlying layers under different stresses and bonding states was studied.The test used three commonly used wearing course （surface layer ） materials of asphalt pavements，namely AC- 13，OGFC- 13，and SMA- 13 for comparative analysis.The test results show that different composite structures exhibit different interlayer bonding properties and fatigue characteristics due to the difference …

Shear Strength Test Of Hefei Expansive Soil Under Low Stress Conditions With Controlled Suction, Hou Chaoqun, Zhang Rongjian, Li Yongxin

Journal of China & Foreign Highway

Topsoil slide and instability of expansive soil slopes may occur under variable saturation conditions.In order to study the strength characteristics of unsaturated expansive soil under low stress conditions，several different matrix suction and stress conditions were set by unsaturated triaxial apparatus.The triaxial shear test of Hefei expansive soil was carried out，and the test data were analyzed.The test results show that when the net confining stress on the expansive soil continues to weaken，the stress-strain curve transitions from strain hardening to strain softening.The strength of unsaturated expansive soil increases with increasing matrix suction.The shear strength of shallow expansive soil shows a significant reduction …

Comparative Analysis Of Test Results Of Different Nano‑Clay Improved Loess, Zhao Danni, Cao Baohua, Xu Jiangbo, Nan Yalin, Chen Nengyuan, Zhang Peng, Wang Heping

Journal of China & Foreign Highway

The orthogonal design t est was used to quantitatively analyze the influencing factors and influence degree of compressive strength，shear strength index，and permeability coefficient of improved loess，and the optimal content of improved loess was obtained.In addition，the improvement mechanism of nano-clay materials on loess was explored by scanning electron microscopy.The results show that：① The factors affecting the compressive strength of improved loess are the content of nano-clay，water content，and curing age，and the factors affecting cohesion，internal friction angle，and permeability coefficient are the content，dry density，and confining pressure.② Under different influencing factors，nano-montmorillonite can effectively improve the compressive strength of loess than attapulgite.③ When the material content …

Influence Of Rap Content On Mechanical Properties And Pavement Performance Of Warm Recycled Asphalt Mixture, Ren Ruibo, Yin Liyang, Xu Qiang, Zhao Pinhui, Ma Shidong

Journal of China & Foreign Highway

Warm recycling technology is an effective new technology for recycling recycled asphalt pavement （RAP ）.In order to improve the pavement performance of warm recycled asphalt and effectively enhance the recycling rate of RAP，the influence of RAP content on the performance of warm recycled asphalt mixture was investigated through mechanical properties and pavement performance analysis，and the correlation between dynamic stability and mechanical parameters of creep tests under repeated loading was discussed.The results show that with the increase in RAP content，the high-temperature stability，shear resistance，and elastic deformation resistance of warm recycled asphalt mixture are improved，but the low-temperature crack resistance and water stability are …

Different Forms Of Nano‑Sio2 In Emulsified Asphalt And Their Effects On Emulsion Storage Stability, Ji Chao, Cao Yuanhao, Li Zhigang

Journal of China & Foreign Highway

The insufficient storage performance of emulsified asphalt has always been a problem affecting its application，and there have been studies in China on nano-SiO2 particles as additives to improve the stability of emulsified asphalt，but the effect is not obvious.Based on the principle of Pickering emulsion，nano-SiO2 with surface modification was used as an emulsifier to directly emulsify matrix asphalt，and whether its stability improvement effect on emulsified asphalt is better than nano-SiO2 as a modified additive was explored.Firstly，three emulsified asphalt were prepared，namely ordinary modified emulsified asphalt A，emulsified asphalt B with nano-SiO2 as a modified additive，and emulsified asphalt C based on the new nano-SiO2 …

Study On Test Methods Of Wheel Sticking‑Free Emulsified Asphalt, Wang Peng, Qin Yongchun, Wang Jie, Xiong Weiming, Chang Rong, Fu Chongfeng, Feng Guoli

Journal of China & Foreign Highway

The wheel sticking-free emulsified asphalt is a key material to solve the wheel sticking problem in the process of asphalt pavement construction，with the wheel sticking-free effect as the core index.The accurate evaluation of the wheel sticking-free effect is important for the popularization and application of wheel sticking-free emulsified asphalt.Based on the research results in China and abroad，two test methods for wheel sticking-free effects （counterweight method and indenter method ） were innovatively proposed，and the wheel sticking-free effects of various emulsified asphalt were evaluated.The test results show that the two test methods can accurately evaluate the wheel sticking-free performance of emulsified asphalt，and …

Study On Mobilization Rate Of Rap Aged Asphalt Based On Ftir, Zou Xiaoyong, Li Ning, Wu Wenxiu, Wang Xin, Xu Xiaohe

Journal of China & Foreign Highway

During the preparation of the recycled asphalt mixture，part of the aged asphalt is first transferred from the surface of the recycled material to the new aggregate and then diffused and fused with the new asphalt，in which the percentage of transferred aged asphalt plays a key role in the final regeneration effect.In order to study the degree of transfer of aged asphalt in reclaimed asphalt pavement （RAP ），the mobilization rate （RMR） was calculated and analyzed based on the Fourier transform infrared spectroscopy （FTIR ）.The AC-13 graded recycled asphalt mixture was mixed and sieved to separate the new aggregate and RAP.The recycled …

Effect Evaluation Method Of Foamed Asphalt Based On Digital Image Processing Technology, Chang Xiaoyu

Journal of China & Foreign Highway

In view of the shortage of deter mining the optimal foaming parameters of foamed asphalt only by experience，this paper adopted digital image processing technology to collect images of the mixture of foamed asphalt and milled material RAI obtained under different foaming conditions and carried out grayscale image conversion，morphological processing，binary image conversion，and image segmentation，so as to calculate the asphalt wrapping rate in different areas.With the uniform dispersion of asphalt in the mixture as the indicator，the foaming effect of foamed asphalt was evaluated，and the optimal foaming parameters were determined.The results show that the digital image processing technology can quickly and effectively evaluate …

Study On Flexural Behavior Of Wet Joints Of Prefabricated Steel‑Uhpc Composite Bridge Deck, Liao Wancheng, Zhao Hua, An Jiahe

Journal of China & Foreign Highway

Prefabricated steel-UHPC composite bridge deck is a new deck structure system that places the longitudinal rib at the upper layer and forms PBL shear connectors.This structure can be prefabricated in the factory and assembled on-site.The adjacent steel beams are integrated by welding，and the cast in-situ UHPC wet joints connect the adjacent UHPC bridge decks.However，these wet joints represent the structure's vulnerable segments but with little research.To this end，a full-scale model test has been conducted to study the flexural behavior of the wet joints in a steel-UHPC composite bridge deck in a practical project.The Abaqus finite element model was established and verified …

Deflection Variation Rule Of Main Girder For A Concrete Cable‑Stayed Bridge Based On Combined Static And Dynamic Modification, Li Qi, Qi D Ongchun, Yang Hu, Zhao Zhiguo

Journal of China & Foreign Highway

In order to solve the problem of continuous downward deflection of the main girder for a concrete cable-stayed bridge during its service life，the deflection variation of the main girder for a long-span concrete cable-stayed bridge during its service was analyzed based on the modified model.A dual-objective optimization problem was constructed by using the combined static and dynamic finite element model modification method and was solved by the non-dominated sorting genetic algorithm （NSGA- Ⅱ）.The Pareto optimal solution set was obtained，and the coordinated optimal solution was found in the Pareto optimal solution set，so as to modify the finite element model.The calculated values …

Influence Of Aerodynamic Shape Change On Wind Resistance Performance Of Large Span Truss Bridge, Jing Dade, Su Yi

Journal of China & Foreign Highway

The development of the transportation an d tourism industry has led to bridges fulfilling additional roles，such as tourism，alongside their transportation functions，resulting in significant changes in structural aerodynamic shape and ventilation rate.This paper analyzed a double-tower single-span steel truss suspension bridge with a main span of 1 088 m，re-evaluated its wind resistance performance through the full-bridge aeroelastic model wind tunnel test，and evaluated the pedestrian comfort problem while studying the wind-resistant stability of the structure.The results indicate that the structural dynamic characteristics of the bridge remain almost unchanged before and after altering the aerodynamic shape of the bridge for its scenic spot …

Influence Of Section Selection On Mechanical Performance Of Corrugated Steel Box Culvert, Zhang Shun, Liu Baodong, Gao Meng, Wu Fei, Wang Zhihong

Journal of China & Foreign Highway

Corrugated steel box culverts exhibit a higher section utilization rate compared with circular，arched，and pipe-arch corrugated steel structures，making them more suitable for for scenarios with restricted embankment height.While numerous studies focus on strengthening strategies for corrugated steel box culverts，research on selecting cross-sectional forms is scarce.This study utilized the finite element analysis software Abaqus to develop finite element models of corrugated steel box culverts with sidewall inclination angles of 0°，5°，10°，15° and 20° respectively.The impact of these inclination angles on the structural stress and deformation outcomes was analyzed.The results indicate that increasing the sidewall inclination angles can effectively reduce vertical deformation and maximum …

Study On Anchorage Reliability For Strand Shoe And Pull Rod Of Air‑Spinning Suspension Bridge, Huang Anming, Yang Bo, Chen Long, Xie Jun, Chen Xin

Journal of China & Foreign Highway

Each strand wire of the main cable in the suspension bridge constructed by the AS method is sleeved and anchored on the strand shoes on both banks.The strand shoe transmits the strand force to the anchoring system through the pull rod.The bearing capacity of the strand shoe after the interaction between the strand shoe and the wires of the main cable，the stress state of the wires after small curvature bending，and the influence of installation accuracy of the pull rod on the anchoring reliability all need to be qualitatively and quantitatively studied and verified by the experiment.In this paper，the main cable …

Construction Technology Of Reactive Powder Concrete Prestressed Box Girder, Wang Xiaojie

Journal of China & Foreign Highway

At present，high-strength and high-performance concrete has some disadvantages，such as low flexural strength，large brittleness，and poor volume stability.Reactive powder concrete （RPC ） is a new type of material，which has good mechanical properties and high impermeability.It can reduce the amount of concrete to a greater extent and reduce the weight of the structure，achieving the purpose of safety，reliability，and cost saving.This paper applied RPC to highway prestressed box girder.Through the innovation and optimization of mix ratio，the change in traditional transportation technology，and curing technology research of steam curing shed，it effectively shortens the pouring time of RPC，ensuring the pouring quality and strength.

Key Construction Techniques For Incremental Launching And High Falling Beam Of Long‑Span Simply Supported Steel Box Girder, Wu Yanbin, Lyu Maofeng, Yin Qijia, Yu Guanqiu

Journal of China & Foreign Highway

Based on the overpass project over Beijing-Hong Kong-Macao Expressway on Changsha Pan-Pan Road，this paper proposed a construction method of large-slope walking-type incremental launching and high falling beam of steel box girder given the difficulties in busy traffic under the bridge，large pushing slope，and great total height of falling beam.After the steel box girder assembly was completed，some bridge deck ancillary facilities were constructed in advance in the preassembly yard and the weight was allocated.The steel box girder was pushed synchronously，thereby reducing the aerial work on the bridge in the later stage.During the incremental launching construction of the steel box girder above the …

Research On Gravity Anchorage Foundation Of Dadu River Bridge In Luding, Zhou Ti Ng, Tao Qiyu, Li Zejun

Journal of China & Foreign Highway

Moraine soils formed during th e Qua ternary glacial period are widely distributed in the west of China，exhibiting good mechanical properties and deep overburden.This paper studied the Dadu River bridge in Luding and investigated the influence of various foundation forms on anchorage stability in the case of considering moraine soils as the soil supporting layer of gravity anchorage foundation through theoretical analysis and numerical simulation.The findings suggest that a slant expanded foundation with a notched sill demonstrates good force-bearing capability and is cost-effective.These results can provide a reference for similar construction projects in the west of China.

Fragilit Y Analysis Of Continuous Rigid Frame Bridge With High Piers And Long Span Subjected To Near‑Field Earthquakes, Sun Yongjiang

Journal of China & Foreign Highway

Near-field earthquakes are more destructive to the continuous rigid frame bridge with high piers and long span.Based on a new-built continuous rigid frame bridge with high piers and long span，considering the seismic demand probability of bridges under near-field earthquakes，this paper utilized OpenSees to analyze the time history of the bridge.The structure response of the bridge under near-field earthquakes was obtained by the nephogram method，and the vulnerability of the bridge under earthquake was analyzed based on the curvature demand probability model of the structure.The results show that the probability response of curvature demand of a continuous rigid frame bridge with high …

Prediction Method Of Surrounding Rock Deformation Of Highway Tunnels Based On Bayes‑Lstm, Liu Zhi, Li Xinyu, Li Zhen, Kong Xianguang, Chang Jiantao

Journal of China & Foreign Highway

In the process of highway tunnel construction，the stability of surrounding rock has a great impact on tunnel construction.Therefore，the monitoring measurement and accurate prediction of surrounding rock deformation of highway tunnels are the keys to ensuring the safety of tunnel construction.In view of the low prediction accuracy and poor generalization ability of tunnel surrounding rock deformation，this paper proposed a Bayesian （Bayes ）-based method to optimize the long-term and short-term memory （LSTM ） network.The method first preprocessed the original monitoring data of crown settlement and peripheral convergence，then constructed the initial LSTM model of crown settlement and peripheral convergence of highway tunnels，and used …