Transportation Engineering Commons^™

Relationship Between Road Network Characteristics And Traffic Safety, Hatim Sharif, Samer Dessouky

Publications

The Transportation and Capital Improvement of the City of San Antonio, Texas Department of Transportation (TxDOT) and other related agencies often make several efforts based on traffic data to improve safety at intersections, but the number of intersection crashes is still on the high side. There is no one size fits all solution for intersections and the City is often usually confronted with doing best value option analysis on different solutions to choose the least expensive yet more advancements. The goal of this project was to obtain the relationship between road network characteristics and public safety with a focus on …

Use Of Ultra-High-Performance Fiber-Reinforced Concrete (Uhp-Frc) For Fast And Sustainable Repair Of Pavements, Shih-Ho Chao

Publications

This research presents a new methodology, which enables streets, roads, highways, bridges, and airfields to use an advanced fiber-reinforced concrete material, which can delay or prevent the deterioration of these transportation infrastructure when subjected to traffic and environmental loadings. The major problem of concrete is its considerable deterioration and limited service life due to its brittleness and limited durability. As a result, it requires frequent repair and eventual replacement, which consumes more natural resources. Ultra-high-performance fiber-reinforced concrete (UHP-FRC) introduces significant enhancement in the sustainability of concrete structures due to its dense microstructure and damage-tolerance characteristics. These characteristics can significantly reduce …

Simplified Approach For Structural Evaluation Of Flexible Pavements At The Network Level, Mena Souliman, Stefan Romanoschi, Samer Dessouky

Publications

Currently, there are few available simple procedures to identify structurally weak pavement sections utilizing Falling Weight Deflectometer (FWD) data at the network level (e.g., city, state or province). A simple method is required to determine the structural condition of pavement sections that can be directly implemented and automated in current pavement databases. The objective of this research study is to develop a simple analysis method to determine the structural condition of pavement sections utilizing the currently available non-destructive testing (NDT) deflection measurement devices at the network level that can be directly implemented and automated in the database of a typical …

A Comprehensive Reliability-Based Framework For Corrosion Damage Monitoring And Repair Design Of Reinforced Concrete Structures, Homero Castaneda, Aydin Karsilaya, Ayman Okeil, Mahmoud Reda Taha

Publications

In this work, we developed a comprehensive framework for corrosion management of reinforced concrete (RC) structures. This framework includes critical steps of an effective approach to quantify the damage evolution as well as providing the timeframe for effective maintenance/repair strategies for corrosion assessment in RC structures. The framework included several activities including the use of indirect and direct inspection tools, theoretical development for damage prediction, experimental measurements and theoretical development of repair time based on reliability. The uniqueness of the framework is the integration of deterministic modeling of corrosion damage evolution by using mechanistic analysis with statistical modeling on corrosion …

Evaluation Of Comparative Damaging Effects Of Multiple Truck Axles For Flexible Pavements, Stefan Romanoschi, Athanassios Papagiannakis

Publications

This study aims at evaluating the effect of overlapping flexible pavement strain responses from truck axles that are not part of multiple axle configurations (i.e., tandem, triple and quad). For this purpose, a newly constructed pavement was instrumented with strain gauges installed at the bottom of the asphalt concrete base layer on US-287 south of Mansfield, TX. This pavement structure is typically used for medium- to high-volume roads in the South-Central region of the United States. The strain gauges were used to measure longitudinal and transverse strains under several passes of a test vehicle. This was a class 6 truck …

Coastal Bridges Under Hurricane Stresses Along The Texas And Louisiana Coast, Adolfo Matamoros, Firat Testik

Publications

The main objective of this study is to develop a high-resolution model capable of simulating the response of bridge structures to hydrodynamic loads for hurricane design conditions (i.e., surge height, wave height, and frequency) expected in the Texas-Louisiana coast. The model relied on Coupled Eulerian-Lagrangian (CEL) techniques where solids are simulated with Lagrangian meshes, while fluids are simulated using Eulerian meshes, and was calibrated using historical data from wave impact laboratory tests. Two high resolution models were created, the first of a tsunami wave impact test conducted at Oregon State University and the second of a bridge located in the …

Development Of A Self-Powered Structural Health Monitoring System For Transportation Infrastructure, Aydin Karsilaya, Samer Dessouky, Athanassios Papagiannakis

Publications

Roadways and bridges play an important role in the economic and social health of society by connecting commerce and people. Economic growth and population expansion pose considerable burden on the aging infrastructure (i.e., pavements and bridges). There is a pressing need to develop structural health monitoring (SHM) technologies capable of collecting infrastructure utilization data. Doing so inexpensively with self-powered systems will revolutionize infrastructure monitoring technology, and will improve decision making enabling roadway and bridge preservation. In this study, a self-powered battery-less structural health monitoring (SHM) system was developed. It is powered by a thermal energy harvester equipped with thermoelectric generators …

Mitigating Traffic Congestion On I-10 In Baton Rouge, La: Supply- And Demand-Oriented Strategies & Treatments, Samir Ahmed, Osama Osman, Julius Codjoe

Publications

The aim of this study is to develop a better understanding of the causes of traffic congestion on I-10 in the Baton Rouge, LA area, particularly at the I-10 Mississippi River Bridge, and to identify treatments and strategies to mitigate congestion at the bridge site. This study developed and calibrated a microsimulation model of I-10 (from Lobdell Highway in Port Allen to Highland Road, I-110 to Florida Street, and I-12 to Walker Road) and investigated several supply- and demand-oriented strategies. This includes: rehabilitation and utilization of the old Mississippi River Bridge on US-190 and the existing US-190/US-61 corridor, overall demand …

Recruiting, Retaining, And Promoting For Careers At Transportation Agencies, Christofer Harper, Susan Bogus, Raghava Kommalapati, Doeun Choe

Publications

State transportation agencies currently face complex challenges in recruiting and retaining the workforce necessary to function effectively. The situation exacerbates due to the number of employees from different generations that have to coexist with varying values, expectations, and principles. These agencies are primarily comprised of two generational groups: the baby-boomers, who are approaching retirement and occupy many managerial positions; and the millennials, who are demonstrating their interest in technology and demanding dynamism in their careers. This multiplicity of interest represents a challenge for human resources (HR) in addressing workforce issues and providing the necessary means to recruit and retain qualified …

Research Incentive Programs For Closures Of Public And Private Grade Crossings, Julius Codjoe

Publications

Vehicle-train crashes that occur at highway-rail crossings result in injuries, fatalities, and damage to equipment. In order to reduce the number of vehicle-train crashes, Federal Railroad Administration requires states which have challenges with crossing safety, including Louisiana, to develop a State Action Plan to improve grade crossing safety. Consequently, identification of specific solutions for improving safety at crossings was included in the 2015 Louisiana Transportation Plan as one of its objectives. This study seeks to identify and evaluate current and new incentive programs that encourage closure of at-grade railroad crossings to reduce the number of potential vehicle-train collision points, and …

The Influence Of Shared Mobility And Transportation Policies On Vehicle Ownership, Edgar Bertini Ruas

PSU Transportation Seminars

With the emergence of several new providers of shared mobility services, such as Uber, Biketown and Car2go, there has been the promise of changes to the traditional way of owning and using a vehicle. One potential consequence of the new mobility services is the reduction in vehicle ownership. At the same time, cities are trying to anticipate these changes by reducing the amount of space dedicated to parking. This thesis aims to asses the extent to which new shared mobility and transportation policy strategies (especially parking requirements and transit pass availability) relate to vehicle ownership among residents of multifamily dwellings. …

Webinar: Segmenting The Market For Transportation Demand Management Campaigns, Philip L. Winters, Amy Lester

TREC Webinar Series

Social marketing seeks to develop and integrate marketing concepts with other approaches to influence behaviors that benefit individuals and communities for the greater social good. It is a useful transportation demand management (TDM) planning approach to promote travel behavior change. The purpose of this study was to explore a consumer market segmentation technique successfully used in Europe for its applicability to marketing efforts in the United States. Attitudinal and demographic data were collected from 1900 individuals in Florida, Oregon, and Virginia modeled after the European approach. Clustering analysis was applied to divide the sample into segments so that members of …

Scenarios For Adoption Of Autonomous Vehicle Technologies In Freight, Sabya Mishra

PSU Transportation Seminars

Innovation adoption research has largely ignored organizational adoption, and little work has been done to understand or predict the adoption of innovations by freight organizations. Among the existing innovation adoption theoretical and methodological approaches this seminar will explore which are most appropriate methods for freight organizational adoption. The seminar will present a disaggregate market penetration model for freight transportation organizations adopting connected autonomous vehicle (CAV) technology and demonstrate an application using a case study area in Memphis, TN. The seminar will highlight ongoing and future organizational adoption research for CAVs, and other innovations.

Effects Of Moving Bottlenecks On Traffic Operations On Four-Lane Level Freeway Segments, Jianan Zhou

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The Highway Capacity Manual (HCM) was developed to provide capacity and level of service analyses for roadway facilities. Trucks may adversely affect the quality of traffic flow on a roadway. In HCM, the passenger car equivalent (PCE) of a truck, which represents the number of passenger cars that have an equivalent effect on traffic flow, is used to account for the impacts of trucks. However, in the past ten years rural freeways in the western rural U.S. have experienced conditions that lie outside the standard HCM conditions. Also, the current HCM truck PCEs may not be appropriate for the western …

Statistical Investigation Of Road And Railway Hazardous Materials Transportation Safety, Amirfarrokh Iranitalab

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Transportation of hazardous materials (hazmat) in the United States (U.S.) constituted 22.8% of the total tonnage transported in 2012 with an estimated value of more than 2.3 billion dollars. As such, hazmat transportation is a significant economic activity in the U.S. However, hazmat transportation exposes people and environment to the infrequent but potentially severe consequences of incidents resulting in hazmat release. Trucks and trains carried 63.7% of the hazmat in the U.S. in 2012 and are the major foci of this dissertation. The main research objectives were 1) identification and quantification of the effects of different factors on occurrence and …

Modeling Socio-Economic Determinants Of Traffic Fatalities, Amin Azimian, Deogratias Eustace

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Over several decades, traffic growth has caused an increased number of traffic crashes, which are associated with economic losses and human sufferings. According to the National Highway Traffic Safety Administration [1] in 2016 there were a total of 34,247 fatal traffic crashes in the United States that resulted into 37,133 fatalities. Risk factors relating to the occurrence of fatal and injury severity of motor vehicle crashes have been extensively studied. Most studies [2-7] that have attempted to model the occurrences of traffic crashes and fatalities have been mainly confined to factors related to driver characteristics, roadway geometry characteristics, traffic characteristics, …

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Publications

Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the corrosion precursors and the corrosion process during damage evolution. Therefore, this work aims to develop and characterize the …

Development, Training, Education, And Implementation Of Low-Cost Sensing Technologies For Bridge Structural Health Monitoring (Shm), Fernando Moreu, Chris Lippitt, Dilendra Maharjan, Marlon Aguero, Roya Nasimi

Publications

Transportation infrastructure needs continuous monitoring. However, traditional inspections cost money and are conducted visually. New technologies for bridge monitoring are expensive and complex. This project involved developing cost-effective sensor technologies that can be applied towards the maintenance of railroad bridges by recording reference-free transverse displacement. More specifically, this project developed new applications of new technologies (Arduino, wireless smart sensors, drones, Hololens) and promoted workforce development with an emphasis on outreach of high-school students. This project was carried out in three main phases: (1) development and validation of technologies, (2) education and outreach to students, and (3) outreach to industry consisting …

Sustainability-Based Long-Term Management Of Bridges Under Multi-Hazard Exposure, Mohamed Soliman

Publications

Bridges are under deterioration due to various mechanical and environmental stressors. Hydraulic-related hazards (e.g., flood and scour), aggressive environmental conditions, and seismic events (e.g., earthquake) are recognized as the most significant threats to the safety of bridges. In traditional risk assessment methods for structures susceptible to damage due to floods and other natural hazards (e.g., corrosion and seismic events), future hazard predictions are conducted using historic return periods and climate records. However, recent increase in flood intensity in central-southern states indicate that future hazard occurrence rate may not necessarily follow past trends. Accordingly, current design, assessment, and management methodologies should …

Driver Comprehension Of Permissive Right-Turns With A Flashing Yellow Arrow (Fya), Christopher Monsere, David Hurwitz

PSU Transportation Seminars

This research explored driver comprehension and behaviors with respect to right-turn signal displays with a focus on the Flashing Yellow Arrow (FYA) in a driving simulator and a comprehension survey. Flashing yellow arrows are used in place of other turn signals, such as solid green or flashing yellow or red circles, to indicate that drivers may turn after yielding to oncoming traffic. These turns are considered “permissive.” Turns where no conflicting traffic is present, such as those indicated with a green arrow, are “protected” turns. The flashing yellow arrow’s inclusion in the 2009 Manual on Uniform Traffic Control Devices sped …

Machine Learning Tools For Optimization Of Fuel Consumption At Signalized Intersections In Connected/Automated Vehicles Environment, Saleh Ragab Mousa

LSU Doctoral Dissertations

Researchers continue to seek numerous techniques for making the transportation sector more sustainable in terms of fuel consumption and greenhouse gas emissions. Among the most effective techniques is Eco-driving at signalized intersections. Eco-driving is a complex control problem where drivers approaching the intersections are guided, over a period of time, to optimize fuel consumption. Eco-driving control systems reduce fuel consumption by optimizing vehicle trajectories near signalized intersections based on information of the SpaT (Signal Phase and Timing). Developing Eco-driving applications for semi-actuated signals, unlike pre-timed, is more challenging due to variations in cycle length resulting from fluctuations in traffic demand. …

Unobserved Heterogeneity And Spatial Correlation: Statistical And Econometric Analyses Of Heavy-Vehicle Hard Braking And Crash Frequency, Jason Anderson

PSU Transportation Seminars

In heavy-vehicles (a truck with a gross vehicle weight rating of greater than 10,000 pounds), a hard braking event is described as an event that prompts the vehicle’s “black box” to record an abrupt change in speed. More specifically, this occurs when the driver applies excess force to the vehicle’s brake. These hard braking events can then serve as a proxy for several factors, such as economic impacts, environmental impacts, and impacts on safety. In the context of the present study, being that approximately one-third of all heavy-vehicle-caused crashes in 2014 were attributed to faulty brakes, there is a need …

Prediction And Rehabilitation Of Highway Embankment Slope Failures In Changing Climate, Navid Jafari, Anand Puppala

Publications

Highway slopes constructed with clayey soil are prone to desiccation cracks due to wetting and drying weather cycle, which allows greater moisture infiltration into the embankment from precipitation. Fissures formed due to extended wetting and drying cycles allow water to seep deeper into the soil than surficial wetting and increase the water content. This increases the moisture content in the soil and results in reduction in shear strength to the fully softened strength. On the other hand, development of desiccation cracks and reduction of the soil matric suction ultimately result in higher hydraulic conductivity value which causes development of higher …

Modeling The Impact Of Traffic Conditions And Bicycle Facilities On Cyclists' On-Road Stress Levels, Àlvaro Caviedes, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Past research efforts have shown that cyclists’ safety, stress, and comfort levels greatly affect the routes chosen by cyclists and cycling frequency. Some researchers have tried to categorize cyclists’ levels of traffic stress utilizing data that can be directly measured in the field, such as the number of motorized travel lanes, motorized vehicle travel speeds, and type of bicycle infrastructure. This research effort presents a novel approach: real-world, on-road measurements of physiological stress as cyclists travel across different types of bicycle facilities at peak and off-peak traffic times. By matching videos with stressful events, it was possible to observe the …

In-Situ Mechanical Characterization For Compacted Aggregates, Douglas Cortes, Paola Bandini

Publications

The evaluation of compacted unbound aggregate layers is perhaps the most common undertaking in transportation-related projects. The assessment of compaction compliance in engineered fills, subgrades, subbases, and bases in roadways and railways is central to ensure longevity of ground transportation infrastructure. In many cases, premature failures in roadways that originate in the unbound aggregate layers can be traced back to inadequate compaction. These failures are preventable, provided the problem areas can be identified by a suitable field test during construction. The most widely used method for compaction assessment during construction is the nuclear density gauge (NDG) test. While the device …

Bridge Inspecting With Unmanned Aerial Vehicles R&D, Paul Darby, Vijaya Gopu

Publications

The project achieves through research including literature, on site interviews, and experimentation: 1) a recommendation for a UAV-based system to practically assist in routine bridge inspection work in the State of Louisiana, 2) the identification and description of advantages, disadvantages, and limitations in the use of UAVs for routing bridge inspection work in Louisiana, and 3) provided recommendations for future work. The Yuneec H520 aircraft and its E90 camera are recommended, as is the need for a boat to be included as part of the system. The recommended system has advantages in reaching portions of the bridge that are difficult …

Development Of Environmentally-Friendly Stabilization Methods For Transportation Infrastructure Based On Geopolymers, Miladin Radovic, Anand Puppala

Publications

Geopolymers (GPs) have received much attention as an eco-friendly and sustainable alternative to conventional chemical additives, since they can be processed at room temperatures from aqueous solutions by utilizing waste materials (e.g. fly ash) or abundant natural sources (e.g. clay). A collaborative research study is carried out by teams from Texas A&M University (TAMU) and University of Texas at Arlington (UTA) to investigate the effectiveness of GPs for stabilizing base and subgrade materials by considering the strength and shrink-swell characteristics. Two types of clay, obtained from the North Dallas area, were mixed with a potassium-based GP synthesized from metakaolin and …

Sustainable And Equitable Financing For Pedestrian Infrastructure Maintenance, Gregory Rowangould

Publications

In many communities, pedestrian infrastructure is discontinuous, inaccessible to those with physical disabilities, and poorly maintained. Correcting these problems would be a first step in providing infrastructure to achieve the active travel and related transportation goals of many communities. One nearly universal challenge to maintaining sidewalks in a state of good repair and addressing environmental justice concerns is an adequate, sustainable, and equitable source of funding. Municipal governments across the country maintain and repair their streets and roadways; however, most require residents to maintain and repair public sidewalks adjacent to their property. These policies are difficult to enforce and may …

Bridge Deck Overlays Using Ultra-High Performance Concrete, Craig Newtson, Brad Weldon

Publications

This study investigated the use of a locally produced ultra-high performance concrete (UHPC) as an alternative to typical overlay materials. Several bond strength tests including slant-shear, splitting tension, and direct tension tests were performed to assess the bond strength between UHPC and normal strength concrete (NSC) substrate with varying surface textures. Tests were also conducted to assess the early-age and longer-term shrinkage behavior and coefficient of thermal expansion of the UHPC as well as rapid chloride permeability testing. Good bond between UHPC and NSC substrate was observed even with inadequate surface texture. Combined shrinkage and thermal effects were investigated for …

Development Of Long-Term Aging Factor For Asphalt Mixtures’ Cracking Resistance, Yucheng Shi

LSU Master's Theses

To characterize the cracking resistance of asphalt mixtures, semi-circular bend (SCB) test has been developed and subsequently accepted as a routine test in mixture design in Louisiana. However, SCB test requires specimens to be aged for five days in laboratory, which makes it not implementable in quality control (QC)/quality assurance (QA).

The primary project objective was to develop an aging factor to transfer the unaged SCB Jc to the aged SCB Jc. Specific objectives were to: (1) investigate the effect of laboratory aging on asphalt mixtures’ cracking resistance and asphalt binders’ rheological and chemical properties, (2) develop an aging …