Transportation Engineering Commons^™

Application Of The Iec Technical Specification For Assessment Of Wave Energy Resource: A Case Study From The West Coast Of Ireland, Iulia Anton, Stephen Nash

Civil Engineering Research in Ireland 2020

There is significant interest globally in harnessing our ocean wave energy resource, estimated at approximately 30,000 TWh/year. The key to this is understanding the resource. The International Electrotechnical Commission (IEC) has developed a technical specification for the evaluation of wave energy resource, IEC-TS 62600- 101: Wave energy resource assessment and characterization. This research applies the IEC standard for a resource characterization study of the Atlantic Marine Energy Test Site on the west coast of Ireland. A key focus is the comparison of the detailed IEC validation approach using scatter diagrams with the traditional timeseries validation approach. Coarse (0.005°) and fine …

A Review Of Vision Based Methods For Pothole Detection And Road Profile Analysis, Darragh Lydon, Su Taylor, Myra Lydon, Julia Early

Civil Engineering Research in Ireland 2020

This paper is an overview of the development and application of Computer Vision for the detection of pothole, pavement distress and road profile analysis and categorisation. A brief explanation of the traditional methods for determining these factors is given, followed by a chronological description of the evolution and the challenges of using Computer Vision (CV) approaches to determine these conditions. The paper is separated into sections aligned to image capture and analysis methodologies. Qualitative evaluations and comparison of these methods have been provided along with the proposal of guidelines for new computer vision-based road analysis systems.

Analysis And Optimisation Of Tii’S Pams Reset Values And Deterioration Models For Irish Pavement Conditions, James Quinn, Raymond Mcgowan, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ireland has a national road network of approximately 5300km that is managed by Transport Infrastructure Ireland (TII). TII create yearly pavement maintenance and renewal programs from the operation of a Pavement Asset Management System (PAMS). Accurate pavement deterioration models and reset values are an essential part of PAMS and are required for life cycle cost analysis (LCCA). Pavement maintenance and renewal schemes are prioritised based on the LCCA's largest benefit to cost ratio, and therefore optimise the annual pavement maintenance and renewal budget. Currently, TII implement pavement deterioration models and reset values from Austria's and Belgium's PAMS, and are not …

Winter Maintenance On The Irish Road Network, Hugh Mcconnell, Brian Mccann

Civil Engineering Research in Ireland 2020

Winter maintenance relates to those activities undertaken where the objective is to minimise the impact of frost, ice or snow on the travelling public. The responsibility for winter maintenance of all roads in Ireland currently rests with local authorities and Transport Infrastructure Ireland (TII) (Formerly the NRA) on behalf of the Department of Transport, Tourism and Sport (DTTaS), (DTTaS, 2017). The aim of the study was to examine current winter maintenance practices undertaken in Ireland by local authorities and the Motorway Maintenance and Renewals Contracts (MMaRC) contractors and examine the potential financial, operational and environmental benefits if pre-wet and brine …

A Review Of Vision Based Methods For Pothole Detection And Road Profile Analysis, Darragh Lydon, S. E. Taylor, Myra Lydon, Julia Early

Civil Engineering Research in Ireland 2020

This paper is an overview of the development and application of Computer Vision for the detection of pothole, pavement distress and road profile analysis and categorisation. A brief explanation of the traditional methods for determining these factors is given, followed by a chronological description of the evolution and the challenges of using Computer Vision (CV) approaches to determine these conditions. The paper is separated into sections aligned to image capture and analysis methodologies. Qualitative evaluations and comparison of these methods have been provided along with the proposal of guidelines for new computer vision-based road analysis systems.

Winter Maintenance On The Irish Road Network, Hugh Mcconnell, Brian Mccann

Civil Engineering Research in Ireland 2020

Winter maintenance relates to those activities undertaken where the objective is to minimise the impact of frost, ice or snow on the travelling public. The responsibility for winter maintenance of all roads in Ireland currently rests with local authorities and Transport Infrastructure Ireland (TII) (Formerly the NRA) on behalf of the Department of Transport, Tourism and Sport (DTTaS), (DTTaS, 2017). The aim of the study was to examine current winter maintenance practices undertaken in Ireland by local authorities and the Motorway Maintenance and Renewals Contracts (MMaRC) contractors and examine the potential financial, operational and environmental benefits if pre-wet and brine …

Modelling The Thermal Behaviour Of A Precast Pcm Enhanced Concrete Cladding Panel, Dervilla Niall, Roger P. West, Oliver Kinnane, Richard Hegarty

Civil Engineering Research in Ireland 2020

According to the World Business Council for Sustainable Development there is currently a stock of more than 80 million buildings in Europe built between 1950 and 1975, a period during which energy performance was not considered in building design. To enable governments to comply with the European Directive 2010/31/EU on the energy performance of buildings, strategies are required to improve the energy efficiency of these buildings. Using the mass of a building to store or dissipate heat can reduce the demand on the auxiliary heating and/or cooling systems and hence reduce the overall energy demand of the building.

Previous research …

Analysis And Design Of A Novel Heavy-Duty Precast Element, Daniel Naughton, Michael Naughton, Michael O'Sullivan, Suhaib Salawdeh

Civil Engineering Research in Ireland 2020

Window sills are common to most buildings. In Ireland, concrete is the most popular material used for external sills. A standard one-metre concrete window sill weighs about 70kg. While external window sills are required to have sufficient capacity to resist damage during transportation and loading, they are non-structural elements. Therefore, there is no need for their high selfweight. This project looks to redesign concrete window sills to make them lighter. Decreasing the amount of concrete used in each sill would significantly reduce their self-weight. This would make concrete window sills more manageable in terms of transportation and installation. Two design …

Development And Localisation Of Ultra High Performance Concrete Using A Particle Packing Model, William Wilson, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ultra-high performance fibre reinforced concrete (UHPFRC) is used worldwide to improve the structural performance of infrastructure such as bridges, extend their working life and reduce environmental impact. As a result thinner structures are constructed leading to reductions in the structure’s self-weight and the volume of concrete and natural raw aggregates used in their construction. A drawback to UHPFRC is that it results in a significant rise in initial costs over normal and even high performance concretes, and it has very high binder contents, which in some cases is greater than 1100kg/m³. Therefore, the cost-efficiency and sustainability of this …

Composite Behaviour Of Wide Sandwich Panels With High Performance Concrete Thin Wythes With And Without Thermomass Shear Connectors, Jagoda Lipczynska, Roger P. West, Michael Grimes, Dervilla Niall, Oliver Kinnane, Richard Hegarty

Civil Engineering Research in Ireland 2020

To partly address the future sustainability of energy use in buildings, there is a program in Europe to retrofit domestic and commercial buildings with non-load bearing insulated re-cladding and over-cladding panels. Recent research work has shown that limited composite action is possible depending on the type of non-conductive shear connector and the stiffness of the insulation between the inner and outer wythes. This paper reports on the mix design development to develop high strength 20mm thick wythes and the manufacture of sandwich panels with five silicone-bonded layers of XPS insulation, making up a panel which is 220mm thick. These model …

Performance Testing Of Hot Mix Asphalt Containing Biochar, Shadi Saadeh, Yazan Al-Zubi, Basel Zaatarah

Mineta Transportation Institute

In recent years, researchers have been able to identify asphalt binder additives, such as polymers and bio-binder, that can enhance the rheological and mechanical properties of asphalt binders. Earlier studies show that utilizing bio-binder as a partial replacement for asphalt binder has shown promising results in both mechanical and sustainability aspects. Biochar additions improved binder viscosity and low-temperature characteristics. Biochar, which is a byproduct of producing bio-binder, has shown enhanced rheological and mechanical properties when used as an additive to the asphalt binder. In this study, the mechanical properties of asphalt mixtures containing Biochar were investigated. In addition, its color …

Interdisciplinary Education Outreach With Traffic Sensor Build Kits, Sarah V. Hernandez, Mariah B. Crews

Civil Engineering Teaching and Learning

The goal of this project was to attract K-12 students to transportation engineering careers through STEM outreach programs. To accomplish this goal, the object of the project was to design and implement maritime freight oriented educational outreach activities centered on traffic sensing technologies for middle, high school, and first-year college students. In MarTREC Project 5011 (Evaluating the Performance of Intermodal Connectors), the research team designed a low-cost, easily implementable LiDAR and Bluetooth sensor bundle that was capable of detecting, characterizing, and tracking freight trucks as they traveled to and from inland waterway port areas. The sensor provided data necessary to …

Examining The Effects Of Reducing The Cement Content Of Portland Cement Concrete Pavement, Bryan Casillas

Graduate Theses and Dissertations

Portland cement is a significant component in a concrete mixture. For concrete used in portland cement concrete pavement (PCCP), the Arkansas Department of Transportation (ARDOT) specifies a minimum cementitious material content of 564 lb/yd3 and a maximum water-cementitious material ratio of 0.45. Prior research conducted at the University of Arkansas, TRC 0603, indicated concrete mixtures used in five bridge decks throughout Arkansas achieved the required 28-day strength at seven days, and the measured compressive strength at 28 days was 30% greater than required. The use of high strength concrete in pavements throughout the state can increase cracking and consequently reduce …

Quantifying Workability, Compactability, And Cohesion Gain Of Asphalt Emulsion Cold In-Place Recycling, Sadie Casillas

Graduate Theses and Dissertations

To maximize the life and quality of a pavement, proper maintenance and rehabilitation are essential. Strategies for pavement rehabilitation with many sustainable benefits are pavement recycling. This dissertation focuses on two types of in-situ pavement recycling: Cold in-place recycling (CIR) stabilized with asphalt emulsion and full depth reclamation (FDR) stabilized with asphalt emulsion or foamed asphalt. One white paper (Chapter 2), two accepted peer reviewed journal articles (Chapters 3 and 4), and one submitted peer reviewed journal article (Chapter 5) are presented in this document to create better understanding of the unique material characterization of asphalt emulsion cold recycled materials, …

Verifying The Calcium Oxychloride Threshold In Cementitious Pastes, Fatoumata Traore

Graduate Theses and Dissertations

Calcium oxychloride (CAOXY) formation is a serious deterioration mechanism known to cause joint damage in concrete pavements. CAOXY is the product of a chemical reaction between calcium chloride (CaCl2) or magnesium chloride (MgCl) deicing salts and calcium hydroxide in the cementitious matrix. Currently, the accepted CAOXY threshold at which deterioration is mitigated in cementitious paste is 15 g/100 g paste (15 oz/100 oz paste); however, this limit was developed using flexural strength testing. For this investigation, the current threshold was evaluated using compressive strength and mass change over time in paste specimens exposed to CaCl2. Fly ash is used to …

Commodity-Based Freight Activity On Inland Waterways Through The Fusion Of Public Datasets For Multimodal Transportation Planning, Magdalena I. Asborno

Graduate Theses and Dissertations

Within the U.S., the 18.6 billion tons of goods currently moved along the multimodal transportation system are expected to grow 51% by 2045. Most of those goods are transported by roadways. However, several benefits can be realized by shippers and consumers by shifting freight to more efficient modes, such as inland waterways, or adopting a multimodal scheme. To support such freight growth sustainably and efficiently, federal legislation calls for the development of plans, methods, and tools to identify and prioritize future multimodal transportation infrastructure needs. However, given the historical mode-specific approach to freight data collection, analysis, and modeling, challenges remain …

Congestion-Clearing Payments To Passengers, Paul Minett, John S. Niles, Richard W. Lee, Brittany Bogue

Mineta Transportation Institute

Peak period motor vehicle traffic volume congests roads all over the world. This project hypothesizes implementing congestion- clearing payments to passengers as a permanent congestion-management solution. Ongoing congestion-free travel would be achieved by removing existing congestion, and absorbing (re)generated demand, at costs that would be expected to increase as the total number of travelers increases over time. The project develops a comprehensive, step-by-step methodology to calculate the benefits and costs of paying for drivers to become passengers at a congestion-clearing level and to maintain this level over time. The method is derived from the literature, analysis by the project team, …

Case Study: Diesel-Powered Loaders Compared To Hybrid Loaders In Heavy Civil Construction, Jesus O. Pena

Construction Management

With the construction industry constantly changing, the environmental impacts of greenhouses gases have become a huge concern. Many contractors are adapting and switching over to hybrid powered systems to allow for more energy saving methods for heavy equipment, an increase in productivity, and efficient construction equipment that comply with emission regulations. The goal for this paper is to analyze the feasibility of heavy civil construction companies switching over from conventional diesel-powered wheel loaders to hybrid wheel loaders. Due to the competitive and saturated market in roadwork construction, many contractors have already begun to invest into hybrid systems. This provides cost …

Development Of An Improved Arterial Roadway Performance Reliability Methodology, Ernest Tufuor

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The need for reliable performance measures of urban arterial roadways is increasing because of the rise in traffic congestion and the high value of travel time. Consequently, travel time reliability (TTR), which combines components of measures of central tendency and measures of dispersion of travel times, has recently received considerable research interest.

The basis of all TTR metrics is the travel time distribution (TTD). Estimating and forecasting arterial TTDs for TTR analysis is the focus of this dissertation. This dissertation proposes a new TTR methodology that is a marked improvement on recent TTR estimation and forecasting methodologies including the current …

A Multi-Objective Optimization Model To Minimize The Gap In Accessibility To Multi-Use Paths While Maximizing The Economic Efficiency Of Active Transportation Investments For Fresno, California, Chih-Hao Wang

Mineta Transportation Institute

This research examines the accessibility to multi-use paths in a variety of neighborhoods in Fresno, California. This study aims to develop a multi-objective optimization modeling framework to be used by decision makers in transportation and policy to maximize the total accessibility to multi-use paths across the city while minimizing the gap between low- and high- accessibility neighborhoods by an optimal allocation of active transportation. Researchers calculate accessibility to multi-use paths by measuring the total length of multi-use paths (walkway and bikeway) a resident could reach from their own Census block group with a 30-minute cycling ride. The study employs a …

Effective Communication Message Strategy For Enhancing Traffic Safety In Fresno County: The Role Of Time Horizon, Regulatory Focus, And Perceived Personal Control, Samer Sarofim

Mineta Transportation Institute

This research empirically investigated the differential effect of message framing on message recipients’ attitudes and intended behaviors related to pedestrian, cyclist, and motorist traffic safety practices. The framework empirically investigated time horizon (expansive vs. limited) and regulatory focus (prevention vs. promotion) message framing.

The time horizon in the message can make someone either think of the future (expansive) or the present (limited). For example, an expansive time horizon message communicates that life is long and directs the focus on the future. On the contrary, a limited time horizon message communicates that life is short and directs the focus on the …

2-D Non-Linear Finite Element Analysis Of Folsom Dam: Seismically Induced Separation And Pore Pressure Along The Soil-Concrete Interface, Grace Amoussou

Master of Science in Civil Engineering Theses

The seismic soil-concrete interface stability of composite dams has been an area of interest to many researchers. However, the true interface behavior during a seismic event has not been well understood. During a ground shaking, bonding and de-bonding action along the interface may cause significant separation of soil and concrete surfaces, and such a separation may take place at any depth along the interface creating a stability concern for the overall dam. Moreover, the repetitive nature of bonding/debonding behavior may induce excess pore pressure along the interface, which in turn, may trigger a liquefaction failure or a hydraulic fracture in …

Numerically Modeling Steel Continuous Bridges For Early Age Concrete Deck Cracking, Abdul Aziz Nabil Salah

Graduate Theses and Dissertations

Early age bridge deck cracking is a common problem throughout the United States. Early age cracking develops shortly after the deck is poured. It reduces the serviceability and lifespan of bridges. Early age cracking can be typically attributed to either of two factors, 1) construction practices, and 2) shrinkage. The Arkansas Department of Transportation (ARDOT) has experienced early age bridge deck cracking. ARDOT currently specifies a sequence deck pour on most of their bridges; however, contractors prefer continuous deck pours because of ease and construction time. During the period of this TRC1903 research project, ARDOT has only approved a few …

Best Practices For Asphalt Emulsion Particle Size Analyses Using A Coulter Counter, Logan P. Kiihnl

Graduate Theses and Dissertations

As asphalt pavements develop distresses, pavement preservation, maintenance, and rehabilitation treatments are used to mitigate distresses and extend the life of the pavement. Many of these treatments utilize asphalt emulsion. Previous research has linked particle size to material properties including viscosity and storage stability. General statements have also been made about particle size influencing emulsion performance while other researchers have identified a trend between particle size and prime coat penetration. Even though literature discusses the importance of particle size, there is little guidance on the best practices of asphalt emulsion particle size analyses, specifically with a Coulter counter.

Data collected …

Development Of Multi-Axial Fatigue Retrofits For Lock Gate Components, Logan Verkamp

Graduate Theses and Dissertations

Lock gates are essential infrastructure components to the United State (US) supply chain. They create large cost savings and environmental benefits when compared with traditional methods of transport (freight and rail). Because of the large quantity of goods and dependence on these shipping chains, the US economy can be drastically affected by an unexpected gate closure. Unfortunately, many lock gates within the US have reached or exceeded their designed life. Due to the intensity of cyclic loads and the environment, fatigue cracks have become a prominent issue. Developed cracks near the pintle region (a joint which the gate rotates and …

Understanding Workability In Belitic Calcium Sulfoaluminate Concrete Mixtures, Caleb W. Chesnut

Civil Engineering Undergraduate Honors Theses

Belitic Calcium Sulfoaluminate cement (BCSA) is an emerging technology in the concrete industry. BCSA has similar hardened properties to portland cement (PC) but can set in under 20 minutes and reach 4,000 psi in less than 2 hours. Portland cement accounts for 8% of the world’s CO2 emissions, BCSA cements require less energy to produce. Studies have shown that 40% less CO2 is emitted during the production of BCSA cement than portland cement. This environmental benefit also makes it a very promising PC alternative. Before a new material can be used, designers need to understand the material’s properties. The goal …

Countermeasures For Pedestrian-Involved Accidents On Interstate-Highways, Anna C. Hunter

Civil Engineering Undergraduate Honors Theses

Pedestrian access to the Interstate is prohibited, but many pedestrian-involved accidents still occur on the Interstate in the United States. This project is a case study of West Memphis, Arkansas, which has the second highest occurrence of pedestrian-involved accidents on the Interstate in Arkansas. The study site location includes a segment of Interstate I-40 which is at- grade. The surrounding area contains several different land-uses, which is believed to be the primary generator of these accidents. The goal of this project is to determine the primary causes of these accidents and determine potential countermeasures to reduce the crash rate for …

Applying Performance Engineered Mixture Design To Permeable Concrete, Rachel Pohl

Civil Engineering Undergraduate Honors Theses

The scope of research and application related to permeable pavements has recently broadened. The desire to significantly reduce the environmental impact of large paved areas makes the permeable pavement concept more desirable (American Concrete Institute, 2018). Although research and interest are increasing, the actual application of permeable pavement is still very limited and has not reached the airfield arena. In airfields, permeable pavement could possibly be used for aircraft aprons - which currently require substantial measures to control stormwater runoff. Permeable pavements are typically used in low-traffic-volume / lightly loaded applications; questions remain regarding a permeable pavement’s ability to hold …

Quantitative Resistance Assessment Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The blast resistance of a typical reinforced concrete bridge pier column design was modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. While varying concrete strength, amount of longitudinal reinforcing steel, and gravity load, the effect of applying an externally bonded steel fiber reinforced polymer (SFRP) wrapping was assessed. The presented approach uniquely quantifies column blast resistance in terms of charge weight. It was found that blast capacity was roughly linearly related to concrete strength and steel reinforcement ratio, the former of which is most influential. It was further found that a single layer of …

Load Truncation Approach For Development Of Live Load Factors For Bridge Rating, Sasan Siavashi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

Various local governments have developed state-specific vehicular live load factors for bridge rating. However, a significant computational demand is often associated with such an effort. This is due to the large size of the weigh-in-motion (WIM) databases frequently used in the procedure. In this study, a method is proposed that can significantly reduce the computational cost of the analysis, while still maintaining reasonable accuracy. The proposed approach develops approximate live load random variable statistics by truncating the WIM database based on gross vehicle weight, then a complete reliability analysis is conducted to develop new live load factors that meet AASHTO-specified …