Structural Engineering Commons^™

Kinematics And Preliminary Fema P-695 Evaluation Of The Newz-Breakss Steel Boundary Frame With Buckling Restrained Brace Structural Fuses, Alexander M. Baker

Dissertations, Master's Theses and Master's Reports

Buckling Restrained Braced Frames (BRBFs) have become a popular seismic force resisting system (SFRS) due to their high ductility and energy dissipation. However, BRBFs are also susceptible to large residual drifts, which can make repair difficult. Efforts to reduce the residual drift of BRBFs typically involve special self-centering braces, or by using a dual system in tandem with the BRBF. This study proposes an alternative approach, in which a self-centering steel rocking frame is used as the boundary frame for the BRBF. The proposed system, called the NewZ-BREAKSS Buckling Restrained Braced Frame (NZ-BRBF) utilizes the recently proposed NewZ-BREAKSS (NZ) boundary …

Tension-Stiffening Effect Consideration For Modeling Deflection Of Cracked Reinforced Uhpc Beams, Le Teng, Rongling Zhang, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Tension-stiffening effects can significantly influence the flexural performance of cracked reinforced concrete specimens. Such effect is amplified for fiber-reinforced concrete, given the fact that fibers can bridge the cracks. The objective of this study was to develop a model to predict the deflection of cracked reinforced ultra-high performance concrete (R-UHPC) beam elements. The modeling approach characterized the average bending moment of inertia by combining the existing model used for conventional reinforced concrete and the analytical model of stress distribution of UHPC along the cross-section. The finite element analysis (FEA) was employed to evaluate the flexural deflection based on the average …

Parametric Study On Environmental Friendly Blast Wall Systems, Mariam Ehab, Aya Elhozayen

Civil Engineering

Protecting people and structures against blast loading that can happen due to several reasons such as wars, terrorism or even accidental explosions, has become of great concern during the last decade. Blast walls is considered as one of the most effective ways to protect important structures against such hazards. However, limitation in technology of construction using high –technology blast wall systems are a huge obstacle specially in developed countries. Moreover, using high-technology materials in construction industry are very polluting process along with the high expenses during construction phase. As a result, designers tend to propose solutions with readily available materials …

Finite Element Method Calculation Of A Prestressed Self Consolidating Concrete Beam, Vladyslav Machulsky

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, a prestressed concrete box beam produced for the Stalnaker Run Bridge (SRB) replacement project using self-consolidating concrete (SCC) was simulated using finite element method (FEM) numerical technique. ANSYS, a commercial FEM software, was used to build the prestressed SCC box beam model. The FEM model was developed to understand the behavior of concrete and steel under prestressing loads, long-term effects, and superimposed loads. The SOLID65 and REINF264 element types were chosen to simulate the behavior of concrete and steel materials. Experimentally measured mechanical properties of concrete from the SRB project were used in the analysis allowing for …

Expanding The Applicability Of Press-Brake-Formed Tub Girders Through The Extension Of The Maximum Span Length And The Evaluation Of Pier Continuity, Robert M. Tennant

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and buried soil steel structure industry leaders who provide educational information on the design and construction of short-span steel bridges in installations up to 140 feet in length. Within the SSSBA technical working group, a modular, shallow press-brake-formed tub girder (PBFTG) was developed to address the demand in the short-span steel bridge market for rapid infrastructure replacement solutions. PBFTGs consist of modular, shallow, trapezoidal boxes fabricated from cold-bent structural steel plate. A concrete deck, or other deck option, may be placed on the girder, and the modular unit …

Quantitative Bridge Inspection Ratings Using Autonomous Robotic Systems, Anil K. Agrawal

Project IM-2

Impact sounding has been recognized as an effective technique to detect delamination in concrete structures, such as concrete decks. An enormous amount of sounding data can be generated/collected by the autonomous inspection systems equipped with impactors and microphones. However, the main challenge in the practical application of this technology is the development of advanced data analysis approaches for identifying defects from impact sounding data. In this study, the empirical mode decomposition (EMD) analysis and power-spectral density (PSD) analysis are combined to extract useful features of sounding data generated by the impact hammer. It has been found that the EMD method …

Comparative Analysis Of Bridge Abutment Types, David Fell

Williams Honors College, Honors Research Projects

This project was developed to serve as a brief overview of design practices and considerations in the selection of highway bridge abutment types. This involved a review of literature in the form of reviewing national design guides and department of transportation (DOT) requirements from both US DOTs and international DOTs. The abutment types covered in this research included conventional reinforced concrete abutments with bearings, integral abutments, and semi-integral abutments. This research focused solely on highway bridge abutments, particularly on Ohio Department of Transportation design requirements due to their extensive use of semi-integral abutments. Superstructure elements and geometric requirements are primary …

Effects Of Friction On The Dynamic Behavior Of Flexible Rocking Bodies, S. Mohammadreza Farooghi Mehr, Christine E. Wittich

Department of Civil and Environmental Engineering: Faculty Publications

Flexible rocking bodies are freestanding structures that are free to deform and rock, potentially overturning, when subject to ground excitation. Prior research on the seismic behavior of this type of structure typically assumed sufficient friction at the ground surface to avoid sliding motion. However, experimental observations showed that this assumption was often violated and structures demonstrated non-negligible sliding during their responses. The overarching goal of this study is to evaluate the impact of sliding on the overturning response of flexible rocking bodies. To this end, a two-dimensional analytical model was developed in a Lagrangian formulation, which is presented in this …

Sediment Transport On The River Bandon, Co. Cork, Ireland, Laurence Lomasney

Theses

This thesis analyses sediment transport on the River Bandon, Co. Cork, Ireland. Bedload transport and suspended sediment transport were monitored on the River Bandon over an extended period to determine rates of transport over varying flow conditions. A literature review of sediment properties (individual and bulk sediment), sediment transport, and numerical modelling was undertaken. A manual field sampling programme was undertaken at different locations on the River Bandon to collect bed sediment and suspended sediment for laboratory testing. This data, and data collected using an automatic water sampler and bed sediment traps also, was used to determine baseline conditions for …

Sustainability And Environmentally Friendly Methods To Travel Over Waterways, Kendall Kubus

Williams Honors College, Honors Research Projects

Throughout daily traveling, the main structures used are bridges and tunnels. Bridges are used as overpasses over valleys, canyons, and areas that require a large amount of dirt fill to bring the roadway up to the proper grade. Tunnels are underpasses through mountains, under city limits and waterways. The benefits of building a bridge structure is little preparation goes into earth-work and the transportation of aggregate materials. There is some time spent testing surrounding soil to determine the process that will need to occur for foundation preparations in bridge columns. Options for foundation include different types of drilled shafts, caissons, …

A Comparison Of Common Structural Materials, Molly Green

Williams Honors College, Honors Research Projects

This report will compare structural steel, concrete, and lumber through the lenses of mechanical properties, design process, cost, and environmental impact. Steel is a versatile, strong, and lightweight material that comes at a premium price – both financially and environmentally. It is the most expensive material of the three included in this report. This is largely due to its complex manufacturing process that is also responsible for a significant amount of the world’s carbon dioxide emissions. Concrete is significantly less expensive than steel, but the carbon dioxide emissions from manufacturing are approximately equal. Concrete also only performs well in compression …

Repairable Precast Bridge Bents For Seismic Events, Kallan Hart

Electronic Theses and Dissertations

Concrete bridge columns are designed to withstand earthquakes by undergoing large displacements. Current seismic bridge codes guarantee collapse prevention, but damage to concrete and longitudinal reinforcement often requires demolition of the structure. Repairable detailing and advanced bridge construction connections may be utilized in concrete bridge columns to allow for quick construction as well as replacement of damaged reinforcement after an earthquake. This detailing may be an attractive alternative to bridge owners to reduce construction and replacement costs as well as ensure the functionality of critical routes after an earthquake. Three repairable precast bridge columns with exposed longitudinal reinforcement were tested …

Steel Diaphragm Innovation Initiative, Year 5, Final Report *Addendum*, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Preface

The Steel Diaphragm Innovation Initiative (SDII) is a multi-year industry-academic-government partnership to advance the seismic performance of steel floor and roof diaphragms utilized in steel buildings. This addendum to the final report covers work conducted on Task 5.6 which was completed during a no-cost extension conducted in 2021. Please refer to AISI RP21-04, the Steel Diaphragm Innovation Initiative, Year 5, Final Report for all other details.

Inspire Newsletter Spring 2022, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Inspire Newsletter Fall 2022, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Review Of Innovative Rehabilitation Techniques For Reinforced Concrete Buildings, Demetrius Karoubas

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building rehabilitation encompasses the act of repairing damaged structural elements, as well as the upgrading of older buildings to bring them up to modern standards. In recent years, due to the extreme economic and environmental cost of new construction, building rehabilitation is gaining ground as the most viable solution to the problem posed by damaged or substandard buildings. With the constant development of new materials with favorable properties and the improvement of our understanding of earthquakes, new rehabilitation techniques are being developed, improving on the efficiency and effectiveness of older ones. Reinforced Concrete (RC) buildings are a type of building …

Experimental And Design Evaluation Of Multi-Bolted Gfrp Joints, Amir Hossein Houshmandyar

Graduate Theses, Dissertations, and Problem Reports (ETD)

For infrastructure system implementation, high strength/stiffness to self-weight ratio, corrosion resistance and ease of fabrication are just a few of the many advantages of pultruded fiber reinforced polymer (PFRP) composites over traditional construction materials. However, challenges of engineered FRP materials are addressed via continuous updating of design codes. For example, the anisotropic nature of FRP composite materials includes different mechanical properties in different directions (pull or longitudinal direction vs. transverse to pull direction) of a structural member, resulting in design complexities over isotropic materials. Typically, infrastructure systems are built by bolting FRP structural members because of certain advantages of bolted …

Post-Seismic Response And Repair Of Earthquake-Damaged Reinforced Concrete Bridges, Giacomo Fraioli

Doctoral Dissertations

“In bridge structures, column members are typically designed to be the primary source of energy dissipation during an earthquake. Therefore, reinforced concrete (RC) bridges that are damaged in an earthquake tend to have damage to the column members. While many studies have been conducted on seismic strengthening of RC bridge columns, most are focused on retrofit instead of repair. In addition, the limited research on seismic repair of RC bridges has focused on evaluating the response of individual columns (member level), not the bridge structure (system level), due to limitations in modeling and especially testing of full bridge structures. Local …

Innovative Approach To Use Guayule Resin As A Bio-Based Asphalt Alternative, Ahmed Hemida

Doctoral Dissertations

"Asphalt cement will not last long as the world encounters a diminishment in crude oil. Novel resources can contribute to replacing asphalt with the sustainable, flexible pavement. This study presented guayule resin (guayule) as an innovative bio-based asphalt alternative. Ground tire rubber was used as an asphalt enhancer. To judge the guayule's contribution, guayule-based binders were investigated and compared to control asphalt and asphalt-rubber binders. Binders were assessed according to comprehensive Superpave criteria and advanced rheological tests. Component analysis was performed to link the microscale level with the macroscale level. To validate the novel binder, satisfying mix performance tests were …