Structural Engineering Commons^™

Development Of Post-To-Deck Connections For Use In A Mash Tl-4 Steel-Tube Bridge Rail, Pascual Mauricio

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

A new post-to-deck connection was designed for mounting an upcoming Manual for Assessing Safety Hardware (MASH) Test Level 4 steel-tube bridge rail to the side of the bridge deck to limit impact load transferred to the deck and to minimize the propensity for deck damage during impacts. With preference for the bridge rail system to be compatible for use on all deck configurations, the Illinois and Ohio Departments of Transportation desired the new system to attach to bridge decks comprised of concrete slabs or precasted prestressed, concrete box-beam girders.

A new post-to-deck connection for a new MASH 2016 TL-4 steel-tube …

An Agent-Based Evacuation Model To Improve Safety In The Cascadia Subduction Zone, Haizhong Wang

PSU Transportation Seminars

This seminar will present ongoing research into how integrated social, natural, and engineered systems can improve life safety under threat of multi-hazards. The targeted scenario is a magnitude 9.0 earthquake and tsunami from the Cascadia Subduction Zone, threatening communities along 1,000 miles of the US Pacific Northwest coastline.

Since the mid-1980’s scientific evidence has underscored the possibility of such an extreme event, and it has taken at least another decade or more before public attitudes and policy have begun to adapt to this new hazard. Life safety is a pressing issue for the near-field CSZ tsunami hazard for several reasons. …

Spectral Analysis Of Train-Rail-Bridge Coupling System Considering Frequency-Dependent Stiffness Of Rail Fastening Systems, Linya Liu, Jialiang Qin, Quanmin Liu, Jong-Dar Yau, Rui Song

Journal of Marine Science and Technology–Taiwan

A rubber rail-pad is typically inserted between the rail and the sleeper to attenuate wheel/rail vibrations for conventional train-rail-bridge (TRB) system. For mathematical modeling, a rail-fastener with rubber pad is simplified as a spring-dashpot unit, whose spring stiffness is related to the exciting frequency of external loads. To exhibit such characteristics of rail-pads on TRB dynamics, based on dynamic flexibility method, two computational models of constant/frequency-dependent stiffness (FDS) are considered for comparison. Numerical studies reveal that the FDS model provides a strengthening benefit for the wheelrail vibration, from which the shifted dominant frequencies in spectral response are observed.

Influence Of Fly Ash Fineness And High Replacement Ratios On Concrete Properties, Shihwen Hsu, Maochieh Chi, Ran Huang

Journal of Marine Science and Technology–Taiwan

The influence of fly ash (FA) fineness and a high cement replacement ratio on concrete properties was investigated. Class F FA with an original fineness of 3,150 cm2 /g (3F) and a high fineness of 5,690 cm2 /g (5F) was used; high cement replacement ratios of 30%, 40%, 50%, and 60% by FA with different levels of fineness (two groups: 3F30, 3F40, 3F50, 3F60, and 5F30, 5F40, 5F50, 5F60 by weight of cement) were selected to produce the blended cement concrete. Tests regarding the heat of hydration, compressive strength, water absorption, rapid chloride penetration, and Mercury intrusion porosimetry were performed. …

Strength Of Steel-To-Steel Screw Connections -- Update To Provisions, Thomas Stevens, Thomas Sputo, Jennifer Bridge

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The objective of this project is to review the existing provisions of the AISI S100-16 North American Specification for Cold-Formed Steel Structural Members, for screw connections loaded in shear and tension (but not combined actions). A recent study by the Steel Deck Institute (Sputo 2017) revealed possible unconservative results for screw pull-over, particularly in thinner sheets and/or lower ductility.

This study performed a comprehensive analysis of available steel-to-steel screw connection strength test data, totaling 702 shear tests, 143 pull-over tests, and 335 pull-out tests. The tested strength of these connections was compared to the predicted strength from the existing …

Behavior Of Geothermal Energy Piles Embedded In Rock, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Geothermal energy piles are categorized as closed systems. Energy piles are a relatively new technology which couples the structural role of traditional pile foundations to that of heat exchangers to fulfill the required energy demand of buildings and infrastructures. These foundations are equipped with pipes embedded in the concrete forming the pile. While connected to a heat pump, the fluid circulating inside these pipes provides the exchange of heat with the ground for heating and cooling purposes. As the undisturbed temperature at the shallower depths of the ground stays comparatively constant the whole year, being warmer than the surrounding temperature …

Molecularly Conductive Behavior Of Blended Polymer Electrolyte-Based Cmc/Pva, Noor Saadiah Mohd Ali, Dishen Zhang, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

This study investigated the electrical conduction and structural behavior of blended polymer electrolyte (BPE)-based carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) in the development of solid-state electrochemical devices. Based on impedance spectroscopy and correlating Fourier transform infrared (FTIR) with thermogravimetric analysis, a framework was proposed to explain the structural enhancement of the BPE system. As revealed by FTIR, the optimum conductivity of CMC/PVA BPEs was 9.21 × 10−6 Scm−1 for 80:20 composition attributed to the intermolecular attraction between the polymers. Thermal stability of the CMC/PVA was influenced by the formation of a hydrogen bond between the hydroxyl (-OH), carboxylate (-COO-), …

Multistage Sonication Effect On The Composition And Properties Of Degraded Chitosan Product, Nurul Laili Arifin, Emma Savitri, Anjar Indah, Fesa Putra, Sumarno Sumarno

Makara Journal of Technology

The sonication method randomly breaks polymer chains to produce a varied distribution of products. A scheme with multi-stage sonication steps is proposed to identify oligomers and low molecular weight chitosan based on changes to the degrad-ed product. For each sonication level, 1% (w/v) chitosan in 1% (v/v) aqueous acetic acid was sonicated for 120 min at 60 °C. The products of the sonication treatment were deprotonized by adding an alkali solution, freeze dried and insoluble product re-sonicated until a low molecular weight was produced. Low molecular weight chitosan/insoluble products were character-ized with Fourier-transform infrared spectra (FT-IR) and X-ray diffraction (XRD) …

Study Of Zno Nanospheres Fabricated Via Thermal Evaporation For Solar Cell Application, Fatin Farisha Alia Azmi, Bouchta Sahraoui, Saifful Kamaluddin Muzakir

Makara Journal of Technology

A solar cell is a device that absorbs light energy to generate electrical energy. A typical example of a solar cell is the quantum dot solar cell (QDSC), which consists of three main components: (i) fluorophore: the component that absorbs light and generates excited state electrons and holes, (ii) photoelectrode: the component that transports the excited state electron and prevents recombination of excited state electrons and holes, and (iii) electrolyte: the component that re-plenishes the vacancy left by the excited electron in the hole. Despite the increasing number of research in the QDSC field, to date, a device with significant …

Electrical Properties Of A Novel Solid Biopolymer Electrolyte Based On Algi-Nate Incorporated With Citric Acid, Ahmad Faizrin Ahmad Fuzlin, Noor Syahida Ismail, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

In the present study, a novel solid biopolymer electrolyte (SBE) system is introduced by doping citric acid into alginate polymer. A sample of the alginate-citric acid SBE system was prepared via a solution casting technique. Using electrical impedance spectroscopy (EIS), the electrolytes of alginate-citric acid analyzed from 5 Hz to 1 MHz achieved the highest conductivity at 20 wt.% of 5.49 × 10-7 S cm-1. The temperature dependence of various citric acid amounts obeyed the Arrhenius rule with R2~1, where all SBE systems were thermally activated with increasing temperature. The dielectric studies of the alginate-citric acid SBE system showed non-Debye …

Civil Engineering Design Of Cornhusker Council's Outdoor Education Center, Kelly Weiler

Honors Program: Senior Projects (Public)

A team of geotechnical, structural, hydraulic, environmental, and transportation experts collaborated to provide engineering solutions to the Cornhusker Council in an effort to solve the current problems facing their Outdoor Education Center. This results of this project provided the structural design of three bridges on the property, transportation plans for two parking lots and roadway design, geotechnical recommendations for soil testing and erosion prevention, and an environmental and hydraulic analysis of the property. A major challenge in the design of this project is the consideration of the dangers and regulations that accompany the floodway and floodplain regions on site. Various …

Fiber-Reinforced Polymer Bridge Girders For Extremely Aggressive Environments, Abdellah Emad Azeez

Doctoral Dissertations and Master's Theses

In 2012, the federal government estimated that $17.5 billion was spent on inspection, rehabilitation, maintenance, and replacement of the nation’s bridges. While the average lifespan of steel and reinforced concrete bridges is 50 years, certain bridges subjected to extremely aggressive marine environments may not reach this desired target. This research paper investigates using fiber-reinforced polymer (FRP) materials as primary bridge girders in medium span bridges (30 ft. to 75 ft.). The goal of this research is to identify the most efficient and cost-effective alternative for these corrosion-resistant materials and potentially extend the lifespan of these bridges up to 75 years. …

Wavelet Transform On Digital Rainbow Hologram Based On Spectral Compression For Quality Enhancement In 3d Display Media, Ucuk Darusalam, Panca Dewi Pamungkasari

Makara Journal of Technology

A digital rainbow hologram (DRH) is a potential next-generation three-dimensional display media for the development of modern and smart electronics devices. It is one of the methods that can support the characteristic whereby a realistic display media occupies the space that the real object would have occupied. Since a rainbow hologram records a large amount of spatial or temporal frequency component from the object that represents the rainbow spectrum, a large amount of information needs to be decoded digitally. In this paper, to reconstruct a DRH, we propose a novel method based on the modulation of red, green, and blue …

The Timber Buckling Restrained Brace Frame, Jessica Resta

Architectural Engineering

With the increasing awareness on the topic of earthquake resistance, efficient, cost-effective, and environmentally friendly solutions in the structural field are on the rise. The purpose of this report is to investigate the Timber Buckling Restrained Brace (TBRB), a new lateral-resisting element made of steel and lumber, applicable in residential and small commercial units. In addition to the TBRBs’ materials being readily available, the braces are easy to manufacture, reducing overall costs of production and transportation. The brace, made partly of wood, has also a low environmental impact when compared to other lateral force resisting elements like concrete shearwalls or …

Data Fusion Method Based On Adaptive Kalman Filtering, Bernadus Herdi Sirenden

Makara Journal of Technology

This paper discusses data fusion methods to combine the data from a rotary encoder and ultrasonic sensor. Both sensors are used in a micro-flow calibration system developed by the Research Center of Metrology LIPI. The methods studied are hierarchical data fusion and Kalman filtering. Three types of Kalman filters (KFs) are compared: the conventional Kalman filter and two adaptive Kalman filters. Moreover, a method to combine the uncertainty results from KF in hierarchical data fusion is proposed. The aim of this study is to find appropriate methods of data fusion that can be implemented in micro-flow calibration systems. Data from …

Sorption-Based Energy Storage Systems: A Review, Kyaw Thu, Nasruddin Nasruddin, Sourav Mitra, Bidyut Baran Saha

Makara Journal of Technology

Mismatched timing between the supply and demand of energy calls for reliable storage systems. Energy storage systems have become further significant with the widespread implementation of renewable energy. These systems can mitigate problems that are often associated with renewable energy sources such as supply unreliability while meeting the de-mand during peak hours. Energy can be stored in various forms, yet storage systems can be generally grouped based on their output forms, namely (i) electricity and (ii) heat or thermal energy. Electrical energy is the most convenient and effective form since it can power almost all modern devices. However, the electricity …

Reliability-Based Shear Rating Of Prestressed Concrete Bridge Girders Considering Capacity Adjustment Factor, Alaa I. Chehab, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

In this study, the reliability of prestressed concrete (PC) bridge girders in the shear rating process is quantified, where the use of a simple procedure to enhance the accuracy of shear capacity evaluation for rating is evaluated. It was found that the approximate methods used in code-based procedures to develop shear resistance used for reliability calibration of the AASHTO Bridge Design Specifications and the Manual for Bridge Evaluation result in larger discrepancies in reliability than previously assumed, as well as substantially conservative shear capacity evaluation in most cases. To examine the effects of using a more accurate shear rating process, …

Bridge Deck Delamination Segmentation Based On Aerial Thermography Through Regularized Grayscale Morphological Reconstruction And Gradient Statistics, Chongsheng Cheng, Zhexiong Shang, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Environmental and surface texture-induced temperature variation across the bridge deck is a major source of errors in delamination detection through thermography. This type of external noise poises a significant challenge for conventional quantitative methods such as global thresholding and k-means clustering. An iterative top-down approach is proposed for delamination segmentation based on grayscale morphological reconstruction. A weight-decay function was used to regularize the reconstruction for regional maxima extraction. The mean and coefficient of variation of temperature gradient estimated from delamination boundaries were used for discrimination. The proposed approach was tested on a lab experiment and an in-service bridge deck. The …

Methodology For Including Base Infrastructure In Conceptual System Analysis, Patrick J. Kelly Iv

Theses and Dissertations

The 2018 National Defense Strategy defines a transition to agile basing, where the logistics footprint of new conceptual systems can be distributed across a set of airfields, instead of one main operating base. Currently, there is no capability to assess early concepts using airfield data. This research develops a methodology and a tool that assesses system concepts using world-wide civil and military airfield infrastructure, such as runway parameters, parking, munitions, fuel and warehouse storage, and distance to areas of interest. Specifically, the focus of the thesis is on concepts for the Intelligence, Surveillance, and Reconnaissance (ISR) Strike mission. Four concepts …

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

Aerodynamic Flutter And Buffeting Of Long-Span Bridges Under Wind Load, Shuqian Liu

LSU Doctoral Dissertations

With the continuous increase of span lengths, the aerodynamic characteristics of long-span bridges under external wind excitation have become much more complex and wind-induced vibration has always been a problem of great concern. The present research targets on the aerodynamic performance of long-span bridges under wind load with an emphasis on bridge flutter and buffeting.

For the aerodynamic flutter analysis of long-span bridges, the present research investigated the effects of the wind turbulence on flutter stability. The characterizations of the self-excited forces are presented in both the frequency-domain and in the time-domain, and the flutter analysis is conducted under both …

Seismic Behavior Of Screen Grid Core Insulated Concrete Form Walls, Anwer Sabah Mohammed Mohammed

Dissertations and Theses

The use of the insulated concrete form (ICF) walls in residential buildings has increased over the past few decades. Much research has been conducted to evaluate the lateral strength of these walls by applying monotonic and cyclic loadings. In the current study, full-scale shake table experiments were employed to evaluate the in-plane behavior of four screen grid insulated concrete form (SGICF) walls. The first two wall specimens utilized dry fit insulated form blocks made from recycled expanded polystyrene granules that were bonded together with cement. When stacked, the cavities in the blocks formed a grid of cores that are evenly …

Battery-Free Wireless Strain Measurement Using An Antenna Sensor, Yang Wang

INSPIRE Archived Webinars

A battery-free antenna sensor can wirelessly measure strain on a structure. Bonded to the surface of a base structure, the antenna sensor deforms when the structure is under strain, causing the antenna’s electromagnetic resonance frequency to change. This resonance frequency change can be wirelessly interrogated and recorded by a reader through electromagnetic backscattering. A radio frequency identification (RFID) chip on the sensor harnesses a small amount of energy from the interrogation signal and responds to the reader. The resonance frequency change identified by the reader is then used to determine the strain applied on the structure. The latest antenna sensor …

Final Design Review: Mascoma River Greenway Extension, Sebastian Strong, Sarah Atac, Eleanor Dowd, David Ruiz, Isalys Quiñones

ENGS 89/90 Reports

This report outlines current conditions surrounding the extension of the Mascoma River Greenway (MRG) to downtown West Lebanon, NH and recommends a route to completion. Included in the report are maps detailing potential route alignments and recommendations based on outside research and interviews with numerous stakeholders, Lebanon City officials, and community members. The report is intended to provide context and updated insight into the present and future of the MRG, following in the spirit of the 2010 MRG Action Plan, a document that created a vision for redevelopment of the Northern rail corridor and motivated stakeholders to move the project …

Heavy Timber Buckling-Restrained-Braces, Kaylee Pit, Junning Liu

Architectural Engineering

No abstract provided.

Flexural Behavior Of Hybrid Composite Beam (Hcb) Bridges, Mohamed A. Aboelseoud, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A new hybrid composite beam (HCB) has recently been used in the construction of three bridges in Missouri, USA. HCB consists of self-consolidating concrete (SCC) that is poured into classical arch shape and tied at the ends by steel tendons. Both the concrete and the steel are tucked inside a durable fiberglass shell, and the voids are filled with polyiso foam. This paper aims to examine the flexural behavior of an in-service HCB, evaluate the current methodology and assumptions, and propose modifications to that methodology. To achieve these goals, the strains induced in HCB elements due to different loading stages …

Probabilistic Seismic Demand Analysis Of A Bridge With Unbonded, Post-Tensioned, Concrete-Filled, Fiber-Reinforced Polymer Tube Columns, Manisha Rai, Mohamed Elgawady, Adrian Rodriguez-Marek

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Ground motions at sites close to a fault are sometimes affected by forward directivity, where the rupture energy arrives at the site in a form of a very short duration pulse. These pulses impose a heavy demand on structures located in the vicinity of the fault. In this research, a probabilistic seismic demand analysis (PSDA) for a self-centering bridge is carried out. The bridge columns consisted of unbonded, post-tensioned, concrete-filled, fiber-reinforced polymer tubes. A bridge model was developed and non-linear time history analyses were performed. Three different methodologies that used spectral accelerations to predict structural responses were used, and a …

Mechanism Of Tricalcium Silicate Hydration In The Presence Of Polycarboxylate Polymers, Rachel Cook, Hongyan Ma, Aditya Kumar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Abstract: The early-age hydration of cement is inhibited in the presence of comb-shaped polycarboxylate ether (PCE) polymer -- a dispersant commonly added to control rheological properties of fresh cement paste. This study employs a series of microcalorimetry experiments and phase boundary nucleation and growth simulations to elucidate the effects of dosage and molecular architecture of PCE on hydration of tricalcium silicate (Ca₃SiO₅ or C₃S in cement notation), the dominant phase in cement. Results show that PCE -- regardless of its molecular architecture -- suppresses early-age hydration of C₃S. PCE-induced retardation becomes increasingly more …

Review Of Fiber Optic Sensors For Structural Fire Engineering, Yi Bao, Ying Huang, Matthew S. Hoehler, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reliable and accurate measurements of temperature and strain in structures subjected to fire can be difficult to obtain using traditional sensing technologies based on electrical signals. Fiber optic sensors, which are based on light signals, solve many of the problems of monitoring structures in high temperature environments; however, they present their own challenges. This paper, which is intended for structural engineers new to fiber optic sensors, reviews various fiber optic sensors that have been used to make measurements in structure fires, including the sensing principles, fabrication, key characteristics, and recently-reported applications. Three categories of fiber optic sensors are reviewed: Grating-based …

Failure Mode Identification Of Masonry Infilled Rc Frames, Rabab Allouzi, Ayhan Irfanoglu

Emirates Journal for Engineering Research

This paper presents a new method to identify the ultimate failure mode of reinforced concrete (RC) frames due to the presence of masonry infill walls. The proposed method is based on simple geometry, reinforcement ratios and material properties of the elements involved in the frame-wall assembly. A simple engineering tool, expressed in terms of infill wall-to-RC frame stiffness and strength ratios, is developed to estimate whether the ultimate failure mode that would evolve during strong earthquake ground shaking in the infilled RC frame is brittle or ductile. The brittle failure mode, that is, shear failure in columns, should be avoided …