Structural Engineering Commons^™

Protecting Bridges From Earthquake Damage, Peter Dusicka

TREC Project Briefs

Earthquake damage to bridges can have serious effects on a transportation network. When a bridge is out, the damage can go well beyond what is immediately visible: in addition to the cost of repairing it, the state must deal with short-term and long-term interruptions to traffic. These interruptions can delay repair and construction, as well as impacting post earthquake emergency response and causing the loss of valuable time for commuters and freight. To prevent this situation, older bridges (ones that are past an average construction life of about 50 years) should be retrofitted with stronger materials, especially in earthquake- prone …

Laboratory Performance Of Highway Bridge Girder Anchorages Under Simulated Hurricane-Induced Wave Loading, Jora Lehrman, Christopher Higgins, Daniel Cox

TREC Final Reports

Many bridges along the Gulf Coast of the United States were damaged by recent hurricanes, and many more are susceptible to similar damage. This research examines the structural performance of common connection details used to anchor prestressed concrete girders to the substructure. Full-scale specimens were fabricated and tested under static and dynamic cyclic load histories. Dynamic load histories were developed from previously conducted hydraulic tests of a 1/5 scale model of a highway bridge under hurricane wave loads. The load effects considered included the pseudo-statically applied vertical uplift force, horizontal force, combined horizontal and vertical forces, and dynamically applied combined …

Seismic Hazard Assessment Of Oregon Highway Truck Routes, Peter Dusicka, Selamawit Tesfayesus Mehary

TREC Final Reports

This research project developed a seismic risk assessment model along the major truck routes in Oregon. The study had adopted federally developed software tools called Risk for Earthquake Damage to Roadway Systems (REDARS2) and HAZUS-MH. The model was the first time REDARS2 has been adopted and used in research outside of the original development team, presenting a number of unique challenges. The development of the model was a complex, intensive process that required a significant research effort, manipulation and adjustment of data. Furthermore, limitations of the software tools themselves had been identified that prevented the inclusion of important aspects such …

Strength And Fatigue Of Three Glass Fiber Reinforced Composite Bridge Decks With Mechanical Deck To Stringer Connections, Andrew Gleason, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

Replacement of the steel grating deck on the lift span of the Morrison Bridge in Portland, OR, will utilize glass fiber reinforced polymer (FRP) panels to address ongoing maintenance issues of the deteriorated existing deck, improve driver safety and introduce bridge water runoff treatment. This report outlines the testing methods and results of an experimental program aimed primarily at evaluating a new open cell deck. While most FRP panels are connected via shear studs that are grouted within isolated pockets, the panels in this case were bolted directly to the steel stringers. Two different FRP deck options were evaluated for …

An Empirical Study Of Particulate Matter Exposure For Transit Users At Bus Stop Shelters, Adam Moore

Dissertations and Theses

Congested traffic corridors in dense urban areas are key contributors to the degradation of urban air quality. While waiting at bus stops, transit patrons may be exposed to greater amounts of vehicle-based pollution, including particulate matter, due to their proximity to the roadway. Current guidelines for the location and design of bus stops do not take into account air quality or exposure considerations. This thesis provides a unique contribution to roadside air quality studies and presents an innovative method for the consideration of bus shelter placement. Exposure to roadside pollutants is estimated for transit riders waiting at three-sided bus stop …

Development Of An Open Source Bridge Management System, Michael H. Scott

TREC Final Reports

A bridge management system is developed using the Tcl scripting language in conjunction with the OpenSees finite element software framework. Fully programmable and string-based, Tcl is ideal for implementing live load analysis through scripts and experimenting with emergent bridge rating methodologies. Since Tcl is an interpreted language, the application also has the important advantage that new bridge capacity models and rating factor calculations can be implemented on multiple platforms without compiling source code. The network programming features of Tcl give the system access to databases for conducting internet-based bridge rating. The system is demonstrated for rating a conventionally reinforced concrete …

Seismic Vulnerability Of Oregon State Highway Bridges: Mitigation Strategies To Reduce Major Mobility Risks, Albert Nako, Craig Shike, Jan Six, Bruce Johnson, Peter Dusicka, Selamawit Tesfayesus Mehary

Civil and Environmental Engineering Faculty Publications and Presentations

The Oregon Department of Transportation and Portland State University evaluated the seismic vulnerability of state highway bridges in western Oregon. The study used a computer program called REDARS2 that simulated the damage to bridges within a transportation network. It predicted ground motions for a specific location and magnitude of earthquake, resulting bridge damage and the cost of the damage, as well as the cost to the public for traffic delays due to detours around damaged bridges. Estimated damage and delay costs were presented for major highways in the region.

Analytical And Experimental Stresses In Concrete Pavements And Unbonded Overlays, Ahmad Jaber

Dissertations and Theses

The principal objective of this study is to determine the accuracy of calculating stresses in concrete pavements and unbonded overlays under different loading conditions. The computed stresses for the single layer pavements are obtained based on Westergaard theory, the finite-element model (ILLI-SLAB), and the elastic layered model (ELSYM5). For the two-layer unbonded systems, stresses are estimated based on the finite-element theory and the Portland Cement Association design method. The experimental results for the comparison were available from a series of tests done on model scale concrete pavements and unbonded overlays. The results of present investigation show that the computed stresses …

A Study Of Single Angle Compression Members, James Robert Callaway

Dissertations and Theses

A study was undertaken to investigate the compressive capacity of a specific group of single angle members.

A review of existing literature and techniques was presented. Laboratory compression tests were performed on 22 angle members of four different sizes and two different lengths. Additional tests were performed to determine the yield strength of the material. The results, normalized with respect to the yield stress, were tabulated and discussed.

Two existing analytic models were used to attempt to predict the ultimate capacity of the test members. The first, an elastic method, was based upon the AISC combined stress equation. The second, …

Secondary Stresses In Bowstring Timber Trusses, John F. Bradford

Dissertations and Theses

This study was undertaken in order to determine analytically the magnitude of the secondary (i.e., joint deflection induced) moments in the continuous glued-laminated chords of bowstring timber trusses. Traditionally, these moments have been assumed to be small and therefore neglected. The American Institute of Timber Construction makes no mention of these moments in their recommended design procedure.

Experimental Determination Of Post-Buckling Performance Of Steel Angles, Rupasiri Purasinghe

Dissertations and Theses

An experimental testing program was conducted to determine the compression member performance in post-buckling region. These results are compared with an analytical computer program developed by Portland State University under Bonneville Power Administration Contract 79-80BP 24005. The paper presents the sensitivity of the performance of single angle compression members to various parameters such as length to radius of gyration ratio, eccentricity, end conditions and yield stress. The effect of local buckling on long member performance is also documented.

Response Of Orthotropic Bridge Decks To Highway Loadings, Harry Morris Rexin

Dissertations and Theses

This thesis documents the fabrication, testing techniques, and response of a plastic scale model of an orthotropic bridge deck. To economically investigate a two-lane steel bridge deck, plastic Acrylic^R was used as a modeling material. Welds were simulated with dichloromethane, a capillary action solvent, and PS-30, a polymerizable cement. Deflections were measured with laboratory dial guages while strains were monitored with strain guages mounted on the deck.

The response of the deck to AASHO vehicle axle loads was compared with a discrete element computer program used to analyze orthotropic bridge decks continuous over flexible supports. Results indicate good correlation …

Direct Design Of A Portal Frame, Angel Fajardo Ugaz

Dissertations and Theses

This investigation was undertaken to develop plastic design aids to be used in the direct design of optimum frames. It uses the concept of minimum weight of plastically designed steel frames, and the concept of linear programming to obtain general solutions. Among the special characteristics of this study are: A. The integration of both gravity and combined loading conditions into one linear programming problem. B. The application of the revised simplex method to the dual of a parametric original problem. C. The application of A and B above in the development of design aids for the optimum design of symmetrical …