Structural Engineering Commons^™

A Bridge-Rehabilitation Strategy Based On The Analysis Of A Bridge-Inspection Data Set, Liam Dromey, Kieran Ruane, John J. Murphy, Brian O'Rourke, Seán Lacey

Publications

Bridge-management systems (BMSs) allow bridge owners to assess the condition of their bridge stock. However, not all BMS packages have the capability to formulate network-level bridge-rehabilitation investment strategies. This research has developed a decision-support system for bridge owners in the selection of the best strategy for bridge rehabilitation at the network level. The basis of the research is an available data set of 1367 bridge-inspection records for County Cork, Ireland, that has been prepared to the Eirspan BMS inspection standard. The developed system consists of a project-prioritisation procedure that builds on previous research, a methodology for the calculation of a …

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power

Publications

Civil Engineering Research in Ireland 2020: Conference Proceedings.

Control Of Energy Storage Utilisation For A Building Integrated Microgrid Using Multi-Objective Metaheuristic Optimisation Methods, Quang An Phan

Theses

The aim of this thesis was to develop and analyse optimisation strategies for commercial buildings with integrated microgrids, in order to find optimal trade-offs between maximising profitability and facilitating renewable energy from the national power grid. The continued proliferation of microgrids, as well as the increase in electricity produced by renewable energy sources on the Irish national grid has necessitated the requirement for these strategies. Models to simulate the performance of a photovoltaic system, wind turbine and battery bank were developed and validated. The most suitable optimisation algorithm to generate an optimal charge/discharge rate schedule for a battery bank was …

A Bridge Rehabilitation Strategy Based On The Analysis Of A Dataset Of Bridge Inspections In Co. Cork, Liam Dromey

Masters

Ageing highway structures present a challenge throughout the developed world. The introduction of bridge management systems (BMS) allows bridge owners to assess the condition of their bridge stock and formulate bridge rehabilitation strategies under the constraints of limited budgets and resources. This research presents a decision-support system for bridge owners in the selection of the best strategy for bridge rehabilitation on a highway network. The basis of the research is an available dataset of 1,367 bridge inspection records for County Cork that has been prepared to the Eirspan BMS inspection standard and which includes bridge structure condition ratings and rehabilitation …

Thermal Envelope Analysis Of Local Authority Low Rise Housing Based On Stock Aggregation Theory Using A Remote Feature Extraction Technique., James Pittam

Theses

Understanding the buildings thermal envelope is paramount to analysing existing problems which facilitate cold bridging and low surface temperatures. As no detailed housing stock database is in existence in Ireland which describes the geometrical configuration of the existing housing stock, and to create one would be a major challenge, this research set out to develop a high speed remote cataloguing and geometrical data extraction methodology to build such a database. Replacing traditional measurement methods with a remote method allows for the rapid extraction of fagade information. A remote surveying process is proposed named, the Virtual Survey Method, for the classification …

A Technical And Economic Appraisal Of Insulation Retrofits, Niamh O'Brien

Theses

The main aim of this literature review is to further develop the project brief and to examine what research has previously been undertaken in the field of thermal conductivity and retrofitting insulation. The basis of this project is to determine the effect of moisture in domestic cavity walls on the effectiveness of retrofitted insulation. The research began by highlighting the reasoning behind the need for insulation within domestic dwellings within Ireland and the guiding legislation in place in relation to this. Carrying on from this, the current methods used to retrofit insulation were examined, along with the types of insulation …

A Technical And Economic Appraisal Of Insulation Retrofits, Niamh O'Brien

Theses

The main aim of this literature review is to further develop the project brief and to examine what research has previously been undertaken in the field of thermal conductivity and retrofitting insulation. The basis of this project is to determine the effect of moisture in domestic cavity walls on the effectiveness of retrofitted insulation. The research began by highlighting the reasoning behind the need for insulation within domestic dwellings within Ireland and the guiding legislation in place in relation to this. Carrying on from this, the current methods used to retrofit insulation were examined, along with the types of insulation …

Effects Of Openings On The Analysis And Design Of Precast Prestressed Hollow Core Slabs, Eoghan Lodge

Theses

Precast prestressed hollow core floors are a widely used structural element which offers increased speed of construction, reduced self-weight and many other advantages. Due to the relatively low span-to-depth ratio and the speed of construction hollow core slabs are utilised in a large number of commercial buildings. In order to carry the services to the upper floors an opening must be made within the prestressed slab. Cutting an opening in a prestressed slab has significant effects on the structural behaviour of the slab and can considerably reduce the ultimate capacity of the slab.

This paper outlines the limited available guidance …

Reinforced Concrete Deterioration Of A 100 Year Old Structure In A Marine Environment, Ross O'Donovan

Theses

The current study investigates the deterioration of a 100 year old bridge located in a harsh marine environment. Constructed in 1908 - 1909 the Mizen Head Footbridge was one of the oldest reinforced concrete bridges in Ireland. The demolition of the bridge in 2009 provided a unique opportunity to examine its service life and to extract samples for analysis and investigation. A review of the construction of the bridge, and its maintenance history are presented, with a view to analysing their influence on the behaviour of the concrete.

Reinforcement corrosion due to chloride attack was identified. A focused study indicates …

A Study Of Creep And Shrinkage In Concrete With A Consideration Of Its Effects On Curved Post-Tensioned Concrete Bridges, William O'Sullivan

Theses

The first objective of the project was to explore the differences between Ordinary Portland Cement (OPC) and Ground Granulated Blast-Furnace Slag (GGBS) cement. The use of GGBS cement concrete is increasing in industry due to the environmental and durability benefits it gives compared with OPC concrete. Data on the creep properties of GGBS cement concrete is limited compared with the data that is available for OPC concrete. Laboratory testing was undertaken to determine the different effects of creep on OPC concrete and GGBS concrete.

The second project objective was to research the effects of creep on post - tensioned curved …

Effects Of Cyclic Loading On Offshore Foundation Systems, Shane Browne

Theses

A brief description of the various offshore foundation systems currently available is provided in this report, including the advantages and disadvantages for each system and water depth in which they can be used. These foundation types include floating structures, jacket structures, gravity base structures and the monopile foundation, on which this research specifically focuses.

The monotonic lateral loading of the monopile structure is also examined and the reasons why monotonic testing is required are highlighted, along with the potential analysis that can be generated to improve the design of the monopile foundation. A review of previous test programmes for monopiles …

Optimisation Of Cold-Formed Steel Purlin Cross-Sections, Matt Clifford

Theses

The subject of buckling of steel members is introduced and the critical nature of local buckling in slender members is highlighted.

The main thrust of work this semester is an investigation into the following buckling modes:

Flexural buckling;

Lateral torsional buckling;

Torsional buckling;

Shear buckling;

Web buckling;

Distortional buckling;

Local buckling.

This investigation has three main components:

1. Review of theory, books and appropriate published work;

2. Investigation into the relevant parts of Eurocode 3;

3. Finite element analysis using the LUSAS FE program to illustrate the various buckling modes.

Finally, the areas to be covered in the Realisation Stage …

The Structural Performance Of Timber Connections, Daniel Coleman

Theses

This thesis sets out to assess the behaviour of mechanically fastened timber-to-timber connections. The design aspects of timber connections are described in detail, with particular emphasis on nailed connections. The effects of inherent variations in timber properties on joint behaviour are also described.

The two types of connections considered were:

■ Corbel (cantilever);

■ Splice.

For each connection type, different nail configurations, nail diameters and shaft lengths were used. Testing undertaken was conducted to investigate the influence of a number of nail configurations on a connection’s initial stiffness. The test results, presented using moment- rotation curves are also used to …

Behaviour Of Unbonded Post- Tensioned Segmental Box Girders With Dry Joints, Michael Matson

Theses

The primary objective of this thesis is to examine the capacity of shear keys used in dry jointed precast post-tensioned segmental box girder bridge construction. The use of dry joints, in lieu of the more traditional glued joints, is becoming more popular in climatically suitable countries. The time and cost savings achieved using this construction form arc significant, due to the economies of scale involved.

The shear capacity of dry jointed keys is calculated using a number of available formulae. However, in previously published papers, significant differences have been noted in the results obtained from these formulae, deeming further investigation …

Rubble-Mound Structure Design In The Coastal Environment, Jack Murphy

Theses

The main aims of this thesis were to investigate the main aspects of the design and implementation of rubble-mound structures as a form of shoreline stabilisation and coastal defence. An emphasis has been placed on the Irish context of how these structures have been implemented in the past. The intention was that this work would improve the understanding of the use of these structures for future projects both in Ireland and internationally.

This work required a literature review which investigated the general aspects of rubble-mound structures, the coastal environment, and the theory of designing the structures’ layout, cross-section and impact …

Shaft Capacity Of Continuous Flight Auger Piles In Sand, Kenneth Gavin, David Cadogan, Patrick Casey

Publications

This paper presents the results of a series of field experiments performed to study the development of shaft resistance on continuous flight auger piles installed in sand. The test piles were instrumented in order to separate the shaft and base resistance, and to allow the determination of the distribution of shaft resistance along the pile shaft. The tests highlighted the importance of accurate calculation of the shaft resistance for nondisplacement piles. At a typical maximum allowable pile head settlement of 25mm, more than 71% of the pile resistance was provided by shaft friction. Conventional methods of estimating shaft resistance were …

Structural Behaviour And Analysis Of A Steel-Concrete Balcony Bracket, Sean Carroll

Theses

For commonly used moment connections, such as the various types of beam to column endplates, a large amount of information in relation to testing data and suggested design methods exist. Engineers can use this information to safely design such connections. When developing new and unique types of connections however, usually no prior testing information is available to engineers due to the unique design. At the present time, the most effective method of designing and developing any structural element or connection is through testing. Testing and detailed analysis of the results gives factual information on the behaviour of the structure, which …

Development Of Calcium Sulfate – Ggbs – Portland Cement Binders, Brian O'Rourke, Ciaran Mcnally, Mark G. Richardson

Publications

Binders manufactured using a blend of gypsum, ground granulated blast furnace slag and Portland cements are technically viable and possess considerable environmental and economic advantages when compared to binders manufactured using Portland cement alone. As such, the evaluation of binders made from these materials offers a promising research focus in the quest to produce technically sound, environmental and economical binders for specialist uses as an alternative to traditional concrete binders of higher carbon footprint. The aim of the test programme was to investigate the viability of a series of binders designed to fulfil particular user needs while having significantly decreased …

The Behaviour Of Long-Span Reinforced Concrete Beams Under Various Loading Conditions., Ciaran O'Leary

Theses

The relative ease of design and construction of simple reinforced concrete beams provides an attractive option for structural engineering designers. However, where longer spans are involved it is more likely that prestressed concrete or possibly some form of steel beams will be preferred.

The primary cause of failure of longer span reinforced concrete beams is likely to be bending. However, the excessive deflection that might be associated with such beams must also be considered. When designing these beams, structural engineers make considerable use of span/effective depth ratios to select trial sections and check deflection limits. Such ratios are provided in …