Structural Engineering Commons^™

Theoretical And Physical Evaluations Of Steel Shear Diaphragms, Hsin-Tien Huang, Larry D. Luttrell

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Shear Resistance Of Steel-Stud Wall Panels, Thomas S. Tarpy Jr.

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Behavior And Design Of Continuous Girts And Purlins, Dimos Polyzois, Peter C. Birkemoe

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Lateral Bracing Of Locally Buckled Columns, Shien T. Wang, Hungy-Y Pao, Raghuram Ekambaram

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Inelastic Load Carrying Capacity Of Cold-Formed Steel Beams, Muzaffer Yener, Teoman Peköz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Compressional Behaviour Of Thick Plate Elements, J. Rhodes, I. H. Marshall

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Doubly Corrugated Barrel Cold-Formed Steel Shells, G. L. Pierce, W. D. Siddall, George Adbel-Sayed

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Analysis Of Closed Section Thin-Walled Beams Subjected To Partially Restrained Warping, J. Ergatoudis, J. Nuttall, T. H. G. Megson

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Simple Design Analysis Of Lipped Channel Columns, J. Rhodes, J. Loughlan

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Behavior Of Cold-Formed Steel Studs In Fire Tests, K. H. Klippstein

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Experimental Study Of The Behavior Of Cable Trays Used In Nuclear Power Plant Applications, Suresh G. Pinjarkar

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Aisi's Cold-Formed Steel Design Specification - Recent Changes, Albert L. Johnson

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Post-Buckling Behaviour Of Bi-Axially Loaded Plates, William J. Supple, Philip J. Wicks

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

European Recommendations For Cold-Formed Sheet Steel In Building, E. R. Bryan

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Engineering Education On Cold-Formed Steel Design, Paul A. Seaburg

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Intermediate Stiffeners For Thin-Walled Members, George Winter, T. P. Desmond, Teoman Peköz

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Bending Strength Of Cold-Formed Steel Longitudinally Reinforced Beam Webs, Phung Nguyen, Wei-Wen Yu

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Post-Buckling Shear Strength Of A Cold-Formed Steel Joist, G. T. Suter, J. L. Humar

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Load And Resistance Factor Design Of Cold-Formed Steel : Tentative Recommendation - Load And Resistance Factor Design Criteria For Cold-Formed Steel Structural Members And Commentary Thereon, Wei-Wen Yu, Theodore V. Galambos

CCFSS Library (1939 - present)

This progress report contains the following two parts: Part I: Tentative Recommendations - Load and Resistance Factor Design Criteria for Cold-Formed Steel Structural Members (pp. i-47). Part II: Commentary on Tentative Recommendations - Load and Resistance Factor Design Criteria for Cold-Formed Steel Structural Members (pp. 48-86). The tentative design recommendations are based on the statistical data presented in previous progress reports and the newly revised load factors used in Section 8.3.4 of the design criteria. The selections of ¢ factors are discussed in the Commentary for various types of structural members and connections. This investigation was sponsored by American Iron …

The Strength Of Cold-Formed Steel Columns, Du Thinh Dat, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION The flexural buckling of columns is a fundamental problem whose solution was found by Euler more than 200 years ago. Since then, refinements have extended the solution to the inelastic range and clarified the influence of initial deflections and residual stresses. Most of these advances were made by studying hot-rolled steel columns, which are widely used. Cold-formed sections are coming into greater and greater use, thanks to the great variety of geometries available, which make them suitable for specific needs, and the significant advances made in the last four decades in understanding the behavior of cold-formed steel and in …

Ultimate Strength Of Cold-Formed Steel Z-Purlins, M. A. A. Razak, Teoman Peköz

CCFSS Library (1939 - present)

INTRODUCTION Cold-formed steel structures are being widely used in various forms of construction such as industrial plants, gymnasiums, hangars and metal buildings. One important feature of metal building construction is the use of light gage roof panels connected to purlins, particularly of the Z-section. This section is, besides the channel-section, the simplest two-flange section which can be produced by cold-forming. The purlins have span lengths of 20 to 25 feet, generally made continuous over the building rigid frames by nesting. Construction details vary from manufacturer to manufacturer. The purlins available would typically have prepunched holes for connection of various types …

Structural Stability Research Council: Proceedings 1980, Structural Stability Research Council

CCFSS Library (1939 - present)

One of the purposes of the Council is to maintain a forum where structural stability aspects of the behavior of frames, columns and other compression-type elements in metal and compression structures can be presented for evaluation and discussion. The Annual Technical Session provides an opportunity to carry out this function. Summaries of the technical papers, the panel discussion and minutes of the business meeting are recorded in the following pages. The attendance list is also included.

Abutment-Thermal Interaction Of A Composite Bridge, David B. Lewis

CCFSS Library (1939 - present)

A two-span test structure, with tie-rods to similate approach-slab forces, was subjected to thermal loading. The resultant strains and deflections are correlated with those obtained from a prior theoretical study. It was concluded ~hat the theoretical procedure provides a rational method for predicting the thermal behavior of composite-girder bridge structures.

Fire Safe Structural Steel: A Design Guide, Joseph Escalada, Georgi Hall, Brandon Matchen, Hoang Nguyen, Alexander Williams

CCFSS Library (1939 - present)

In 1974, the Constructional Steel Research and Development Organization (CONSTRADO) of England commissioned Ove Amp & Partners to prepare a detailed technical report setting out the most plausible models of flame projection from openings in building facades and the methods of calculating heat transfer from fires to exterior exposed steel columns. The report and an accompanying calculation method were completed in November 1975. In July 1975, the Subcommittee on Fire Teclmology of the Committee on Construction Codes and Standards of American Iron and Steel Institute commissioned a revised major extension of Ove Amp's work, and a two-volume report was completed …

Plastic Analysis And Tests For Rigid High-Rise Composite Frames, J. Hartley Daniels, Dirk P. Duplessis, Thomas Wenk

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

The Variations Of Charpy V-Notch Impact Test Properties In Steel Plates, Aisi Technical Committee On Plates And Shapes

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

A survey of the variation to be expected in Charpy V-Notch tests obtained from plates was conducted by the Committee on Product Standards at the request of the Committee on General Metallurgy. The results of the survey are presented in this report.

The survey data consisted of longitudinal and transverse impact test values obtained from seven specified locations on plates produced to ASTM A-572 as-rolled, A-516 normalized and A-537 quenched and tempered. Three testing temperatures were used for each grade.

The data were collected from industry production during 1973 and 1974. Sufficient data were received to estimate limits of variation …

Welding Of Sheet Steel, Teoman Peköz, William Mcguire

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Load And Resistance Factor Design Of Cold-Formed Steel Statistical Analysis Of Mechanical Properties And Thickness Of Materials Combined With Calibrations Of The Aisi Design Provisions Of Unstiffened Compression Elements And Connections, Trinh-Ngoc Rang, Wei-Wen Yu, Theodore V. Galambos

CCFSS Library (1939 - present)

INTRODUCTION This report presents the progress made on the development of the load and resistance factor design of cold-formed steel following the preparation of the First Progress Report. In Article 11.1, the statistical analyses of the tested values versus the specified values on mechanical properties and thicknesses of the steel sheets and strip are discussed. More than 4,000 tensile coupon tests on mechanical properties and 1,400 data on thickness of steel sheets have been collected and analyzed. For the purpose of formulating the procedures to be used for calibration of various provisions of the AISI Specification, the required formulas are …

Structural Stability Research Council: Proceedings 1979, Structural Stability Research Council

CCFSS Library (1939 - present)

One of the purposes of the Council is to maintain a forum where problems related to the design and behavior of columns and other compression elements in metal structures can be presented for evaluation and discussion. The Annual Technical Session provides an opportunity to carry out this function. The 1979 Annual Technical Session was held on April 24 and 25 at The William Penn Hotel in Pittsburgh, Pennsylvania. Eighty-five persons attended the Session and twenty-seven papers were delivered. A panel discussion on "Stability of Space Frame Structures" was held in the evening of April 24, 1979. The panelists were R. …

Load And Resistance Factor Design Of Cold Formed Steel-Calibration Of The Design Provisions On Connections And Axially Loaded Compression Members, Wei-Wen Yu, Trinh-Ngoc Rang, Theodore V. Galambos

CCFSS Library (1939 - present)

No abstract provided.