Structural Engineering Commons^™

Multi-Point Vibration Measurement And Mode Magnification Of Civil Structures Using Video-Based Motion Processing, Zhexiong Shang, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Image-based vibration measurement has gained increased attentions in civil and construction communities. A recent video-based motion magnification method was developed to measure and visualize small structure motions. This new approach presents a potential for low-cost vibration measurement and mode shape identification. Pilot studies using this approach on simple rigid body structures were reported. Its validity on complex outdoor structures has not been investigated. In this study, a non-contact video-based approach for multi-point vibration measurement and mode magnification is introduced. The proposed approach can output a full-field vibration map that increases the efficiency of the current structural health monitoring (SHM) practice. …

An Enhanced Bridge Weigh-In-Motion Methodology And A Bayesian Framework For Predicting Extreme Traffic Load Effects Of Bridges, Yang Yu

LSU Doctoral Dissertations

In the past few decades, the rapid growth of traffic volume and weight, and the aging of transportation infrastructures have raised serious concerns over transportation safety. Under these circumstances, vehicle overweight enforcement and bridge condition assessment through structural health monitoring (SHM) have become critical to the protection of the safety of the public and transportation infrastructures. The main objectives of this dissertation are to: (1) develop an enhanced bridge weigh-in-motion (BWIM) methodology that can be integrated into the SHM system for overweight enforcement and monitoring traffic loading; (2) present a Bayesian framework to predict the extreme traffic load effects (LEs) …

On The Ramberg-Osgood Stress-Strain Model And Large Deformations Of Cantilever Beams, Ronald J. Giardina Jr

LSU New Orleans Theses and Dissertations

In this thesis the Ramberg-Osgood nonlinear model for describing the behavior of many different materials is investigated. A brief overview of the model as it is currently used in the literature is undertaken and several misunderstandings and possible pitfalls in its application is pointed out, especially as it pertains to more recent approaches to finding solutions involving the model. There is an investigation of the displacement of a cantilever beam under a combined loading consisting of a distributed load across the entire length of the beam and a point load at its end and new solutions to this problem are …

Hazard Assessment Of Meteoroid Impact For The Design Of Lunar Habitats, Herta Paola Montoya, Shirley Dyke, Julio A. Ramirez, Antonio Bobet, H. Jay Melosh, Daniel Gomez

The Summer Undergraduate Research Fellowship (SURF) Symposium

The design of self-sustaining lunar habitats is a challenge primarily due to the Moon’s lack of atmospheric protection and hazardous environment. To assure safe habitats that will lead to further lunar and space exploration, it is necessary to assess the different hazards faced on the Moon such as meteoroid impacts, extreme temperatures, and radiation. In particular, meteoroids pose a risk to lunar structures due to their high frequency of occurrence and hypervelocity impact. Continuous meteoroid impacts can harm structural elements and vital equipment compromising the well-being of lunar inhabitants. This study is focused on the hazard conceptualization and quantification of …

Soil-Structure Interaction Effects On The Seismic Response Of Low-Rise Eccentrically Braced Frames, Luis Gerardo Buitrago Goyez

Graduate Theses and Dissertations

The importance of soil-structure interaction (SSI) effects on the seismic response of buildings has been long recognized and has been researched for over 40 years. However, SSI analysis has only been applied in a few building projects because the fixed base condition is considered to provide a conservative estimation for the response of buildings under seismic loads. This assumption of a fixed base condition adopted by practitioners is not always conservative or cost-effective, especially for rigid buildings over soft soils. Additionally, for the case of ductile steel frames with eccentric configurations, the influence of SSI on their seismic performance has …

Experimental Building Demonstration Model With Viscous Fluid Dampers, Blake Thomas Reeve, Brianna Jean Kufa, Aden Malek Stepanians, Sophie Carmion Ratkovich

Architectural Engineering

The Architectural Engineering major places a heavy emphasis on structural dynamics and the role of wind and seismic loading in building analysis and design. Buildings of high importance that are critical to community function, such as hospitals, often utilize supplemental damping devices like supplemental viscous fluid dampers or base isolators to reduce the overall demands on the structural system. The design and analysis of these dampers are typically not taught at the undergraduate level, and is frequently performed by mechanical engineers, in lieu of structural engineers.

To better understand and research building behavior with supplemental damping devices, our multi-disciplinary team …

Case Studies Of Cavity And External Wall Insulation Retrofitted Under The Irish Home Energy Saving Scheme: Technical Analysis And Occupant Perspectives, Aimee Byrne, Gerard Byrne, Garrett O'Donnell, Anthony Robinson

Articles

The residential sector represents 27% of primary energy consumption in Ireland. This paper examines the case study of the Irish government’s national grant scheme to encourage energy efficiency retrofit in private housing. That is the Home Energy Saving (HES) Scheme, later rebranded the Better Energy: Homes (BEH) Scheme. The methodology involved monitoring several homes immediately before and after retrofit alongside discussions with occupants. The examination focused on specific measures commonly introduced through the HES/BEH programme − cavity and external wall insulation. It has been found that a significant decrease in heat loss through the walls was measured in all cases. …

Pre-Construction Rock Treatment And Soil Modification Program Using Low Mobility Grout To Mitigate Future Sinkhole Development In A 2,787.1 Square Meter (30,000 Sf) Maintenance Facility, Steven W. Shifflett

Sinkhole Conference 2015

The US Army required construction of a 2,787.1 square meters (30,000 sf) maintenance facility supported on shallow foundations at the Fort Campbell Military Installation. During the subsurface investigation a seven foot air-filled void was encountered in the bedrock within the building footprint. Electrical Resistivity Imaging (ERI) was conducted in an attempt to determine the lateral extent of the encountered void and to establish the general prevalence of karst features at the site. Due to uncertainty in the subsurface conditions, a rock treatment and soil modification program was developed which consisted of a series of targeted exploratory grout holes advanced in …

Interface Friction Parameters For The Mathematical Modeling Of Shell Structures With Infill, Alexander T. Bekker, Nikita Ya. Tsimbelman, Tatiana I. Chernova, Vadim D. Bruss, Ömer Bilgin

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Thin metal or reinforced concrete shells with granular infill structures are considered in this article. These structures are massive and they are used as support for the construction of berthing quays, piers, artificial islands, shore protection, and other structures of coastal infrastructure. It is more convenient to use the thin shell structures during the development of the Arctic shelf, because it is possible to install them from the ice side. In addition, it is possible to enhance the technology and install thin shells with infill on deeper solid foundation layers. A mathematical model for the stresses on a compressible foundation …

Power Maximization Of A Three-Phase Hydrokinetic Turbine, Matthew Carleson

Senior Theses

As Earth`s expendable resources dwindle, the need for alternative, renewable energy sources grows. Out of this need, an old favorite source is rising in popularity: small water turbines. Water-driven turbines first began as a means for turning mills and eventually evolved into massive dams that can power whole regions. This project focused on the construction of, and testing the properties of, a small pico-hydro power turbine. By using compressed air to drive the turbine, a representation of the peak power output was measured, serving as a basis for determining the value of pico-power systems in regards to the world`s current …

Mathematical Model Of The Shell With The Infill For Retaining Structures, Alexander T. Bekker, Nikita Ya. Tsimbelman, Dmitriy A. Potyanikhin, Andrey I. Mamontov, Ömer Bilgin, Tatiana I. Chernova

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

A description of finite element model and analysis of a shell with an infill is performed. A large diameter thin cylindrical shell structure with the edge leaning against compressible foundation soil is analyzed. Different materials are considered individually for the models of each structure shell and infill component (metal or reinforced concrete shell, and granular or elastic infill in a shell and foundation soil loaded by the structure). Contact conditions between 1) the infill and the shell’s inner surface and 2) between the foundation material and the shell edge are analyzed. An example of calculating strain conditions in the shell …

Proceedings Of The First International Conference On Smarandache Multispace & Multistructures, Florentin Smarandache, Linfan Mao

Branch Mathematics and Statistics Faculty and Staff Publications

In recent decades, Smarandache’s notions of multispace and multistructure were widely spread and have shown much importance in sciences around the world. Organizedby Prof.Linfan Mao, a professional conference on multispaces and multistructures, named the First International Conference on Smarandache Multispace and Multistructure was held in Beijing University of Civil Engineering and Architecture of P. R. China on June 28-30, 2013, which was announced by American Mathematical Society in advance.

Anchored Sheet Pile Wall Design In Expansive Soils, Ömer Bilgin, Eman Mansour

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Expansive soils cause damage to civil engineering structures in various parts of the world, because they swell when absorb water and shrink when dry out. Due to swelling pressures, retaining walls can be subjected to additional lateral pressures causing increased wall deformations and bending moments. Anchor forces can also increase, if the walls are anchored. When expansive soils are present behind retaining walls, swell pressures should also be considered during design in addition to the traditional lateral earth pressures. This study proposes a method to predict potential swell pressures acting on retaining walls for use in design of these walls. …

Design, Construction And Load Testing Of The Pat Daly Road Bridge In Washington County, Mo, With Internal Glass Fiber Reinforced Polymers Reinforcement, Zhibin Lin, Mostafa Fakharifar, Chenglin Wu, Genda Chen, Wesley James Bevans, Arun Vijay Kumar Gunasekaran, Sahra Sedigh

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The overarching goal of this project is to deploy and assess an innovative corrosion-free bridge construction technology for long-term performance of new and existing bridges. The research objective of this project is to conduct a comprehensive study (instrumentation, construction, both laboratory and field evaluation) of a rapidly constructed and durable, three-span bridge with cast-in-place cladding steel reinforced concrete substructure and precast concrete decks/girders reinforced with glass fiber reinforced polymers (GFRP). The bridge has one conventional concrete-girder span, one conventional steel-girder span, and one innovative concrete box-girder span. The conventional concrete and steel girders were used to demonstrate the effective use …

Multi Geophysical Parameters For Earthquake Forecasting, Ramesh P. Singh

Mathematics, Physics, and Computer Science Faculty Articles and Research

This article focuses on the importance of keeping the public aware of earthquake forecasting. This article also encourages proper seismic codes to design buildings in the seismic-prone regions because such practice can save lives and property associated with an earthquake.

Input-Output Analysis Of Irish Construction Sector Greenhouse Gas Emissions, Adolf Acquaye, Aidan Duffy

Articles

Ireland is committed to limiting its greenhouse gas (GHG) emissions to 113% of 1990 levels over the period 2008-12 and to 84% of 2005 levels by 2020 under the Kyoto Agreement and the EU’s ’20 20’ by 2020 respectively. National policies have targeted many industry sectors but have failed to directly tackle GHG emissions associated with construction activity. This paper estimates energy and GHG emissions intensities of the Irish construction sector and subsectors and estimates its contribution to Irish national emissions. This information is used to identify and assess the impacts of policy measures which would result in a reduction …

Design, Construction And Load Testing Of The Bridge On Arnault Branch, Washington County, Missouri Using Innovative Technologies, Dongming Yan, Genda Chen, Nestore Galati, Sahra Sedigh

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The superstructure and instrumentation designs of a three-span bridge are presented in this report. The three spans include a precast box-girder bridge, a precast deck on steel girder and a precast deck on concrete girder. They were designed to compare the performance of various bridge decks reinforced with fiber reinforced polymers (FRP) through field instrumentations. A wireless monitoring system was designed to facilitate the collection of field data after the completion of bridge construction. The collected data will allow the study of FRP bars and stay-in-place FRP grid systems.

Augusta Me: The New Bridge Begets A New Planned Neighborhood, Molly Pulsifer, Richard Barringer

Planning

Construction of a new Third Bridge over the Kennebec River in Augusta offered the prospect of a new and handsome gateway to the city. Further, the resulting change in traffic patterns offered the City the chance to plan for a pattern of development quite different from what the city had experienced for the past half-century. The case study describes the planning and construction of the new bridge and corridors that re-routed traffic out of Augusta’s downtown and older neighborhoods, and created the opportunity for planned development adjacent to the corridor created by the new bridge. It goes on to describe …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Assessment Of Engineering Mechanics Instructional Multimedia In A Variety Of Instructional Settings, Richard H. Hall, Nancy Hubing, Timothy A. Philpot, Ralph E. Flori, Vikas Yellamraju

Business and Information Technology Faculty Research & Creative Works

Students from Ten Schools, Representing Seven Countries, Used Interactive Multimedia as a Part of their Engineering Statics Classes. the Software Consisted of Four Modules, Which Focused On: Mohr's Circle; Centroid and Moment of Inertia; Stress Transformation; and Structural Analysis. the Students Completed On-Line Surveys About their Experience with the Software. Analysis of the Results Indicated that Students Rated their Knowledge of the Subject Matter Covered in the Software as Increasing Significantly as a Consequence of using the Software. However, This Increase Was Substantially More Pronounced for Students in U.S. Schools. Students Rated the Software as Significantly More Effective Than their …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Interactive Learning Tools: Animating Statics, Nancy Hubing, David B. Oglesby, Timothy A. Philpot, Vikas Yellamraju, Richard H. Hall, Ralph E. Flori

Business and Information Technology Faculty Research & Creative Works

Computer-Based Modules for Engineering Instruction Must Be Concise, Flexible, Educational and Engaging in Order to Effectively Supplement Traditional Classroom Teaching Tools. a Computer Example that Takes More Time Than a Chalkboard Presentation is Not Likely to Be Useful in Today's Engineering Classroom. Flexible Navigation is Necessary So that the Instructor Can Quickly and Easily Respond to Student Questions. Useful Modules Must Also Improve Problem-Solving Skills or Clarify Troublesome Concepts in Order to Be Considered Worthy of Inclusion in the Limited Class Time Available. Finally, and Perhaps Most Importantly, Effective Computer-Based Modules Must Meet the Challenge of Holding the Student's Attention. …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Mobile Deployable Bases And Ports: A Study For Interim Requirements, William Glenn Moore

Marine Affairs Theses and Major Papers

Logistics is an age old problem that has been the key to the greatest victories and defeats in history. Maritime support of wartime land campaigns as well as conflicts at sea, has been the answer to that problem even as far back in history as the ancient Greek Empire. Throughout the ages however the lesson that seems to be learned and relearned, the hard way, is that of logistic support. Today the United States is faced with what, to some seems to be an overwhelming problem in logistic support overseas, particularly in the maritime transportation and support arena. The U.S. …

Farm Water Storage : Circular Brick Reservoirs, R P. Harington

Journal of the Department of Agriculture, Western Australia, Series 4

A circular brick tank is a cheap and efficient water storage which can be easily built on any farm. The method described below by Kimberley Research Station manager R. P. Harington was used to build a swimming pool—storage on the station.

Comprehensive Survey Of Sedimentation In Lake Mead, 1948-49, W. O. Smith, C. P. Vetter, G. B. Cummings, U.S. Bureau Of Reclamation

Publications (WR)

Reservoirs are becoming an increasingly prominent feature of the American landscape. Built for flood mitigation and to change a fluctuating river into a dependable source of water for irrigation, power, and other purposes, they are predestined, like natural lakes, to be destroyed sometime following their creation. Sedimentation sooner or later robs most lakes and reservoirs of their capacity to store water. The significance of sedimentation in the life of Lake Mead, the largest artificial reservoir in the world, was realized when the plan for the reservoir was conceived, and an aerial survey of the floor was made in 1935 before …