Hydraulic Engineering Commons^™

Importance Of Creating A System Of Land And Cadastral Data For Subjects Of Agriculture, К. Rakhmonov, M.O. Abdurakhimova

Irrigation and Melioration

A separate model and model were developed for compiling cadastral maps used by the authors for agricultural organizations. The model is intended for enterprises operating in the Tashkent region. The article is based on the scientific and methodological order and the system of destruction of irrigated lands. Based on the experience of leading foreign countries in this area, the possibilities of introducing modern electronic computers in Uzbekistan are presented. The procedure for converting data into a specific algorithm is recommended for the formation of a system of land cadastral data in agricultural entities. It is necessary to create an information …

Apple Orchard Drip Irrigation Conditions Of The Tashkent Region Of Uzbekistan, Sardor Gulyamov, Bakir Serikbaev, Anvar Sherov

Irrigation and Melioration

The article presents the results of many years of theoretical experimental field research on drip irrigation of the apple orchard of the Golden variety in the conditions of the Tashkent region. Based on the analysis of climatic, soil, hydrogeological, geological, hydrological and economic conditions of the experimental plot, as well as biological features of the garden, the values of total water consumption, water consumption deficit, irrigation, irrigation rate and the number of irrigation by the bioclimatic method are determined.

Calculation Of The Placement Of Vertical Drainage Wells Near An Open Water Source In The Conditions Of Waterlogging Of Built-Up Areas, B.K. Saliev

Irrigation and Melioration

The article discusses the methodology for calculating the intercepting drainage well that reveals the upper layer of the multilayer horizon, and presents analytical dependencies based on the hydrodynamic theory and formulas for approximate calculation of the location of the axial line of the blocking drainage between the source of flooding and the protected built-up area from flooding. In particular, mathematical methods have been improved to solve the forecast problems of flooding in conditions of different pressure, based on the relationship between the depressions and the incoming flow of pressure water into the drainage well. The presence of underground pressure water …

Field Research Methods And Some Results For Distribution Of Suspended Sediment In Flow Constrained By Transverse Dams, M.R. Bakiev, K.T. Yakubov, O.M. Matkarimov, Z.B. Dovlatov

Irrigation and Melioration

The article presents methods for determining the main parameters of flow of medium hydraulic size sediment, turbidity, sampling methods in field and the instruments used for sampling, methods of processing the samples in laboratory. Methods for setting sections and gage points and conducting field and laboratory research have been developed for flow deformed by blank and through flow transverse dams, water surface longitudinal and transverse slope takes place in the flow constrained by transverse dams, changes in suspended sediment distribution occur inversely. Location of sections for sampling is determined in the article: in the headrace –beyond dam influence zone, maximal …

Hydromechanical Parameters Of River Sediment, A.M. Arifjanov, D.Sh. Allayorov

Irrigation and Melioration

The main problem today in irrigation canals is the danger of siltation, in this process it is important to correctly assess the factors affecting the throughput (hydromechanical parameters of sediment) and using their justification of the hydraulic elements of the flow. The article presents the results of theoretical studies of the main hydromechanical parameters (hydraulic fineness) of river sediments, in hydraulic structures, in particular in irrigation canals, which currently increasingly affect adversely moving water. It has been established that the hydraulic size entering the right bank irrigation sump of the Kokand hydropower complex varies in the range of 189-429 mm/s, …

Minimizing Control Circuits Using Logic Elements, R.T. Gaziyeva, A.M. Nigmatov, E.O. Ozodov

Irrigation and Melioration

In this article considered information about contact and non-contact automation. In most cases, contact automation is used in many pumping stations. These phenomena are a power surge or voltage drop. And also the use of contact automation occupies a large place and inconvenience in operation. Non- contactless automation solves these problems. Pumping stations are usually designed with the calculation of their operation without permanent duty personnel. At large stations, a small staff is provided, which primarily carries out control functions. Set the automatic operation of pumping units. Often, automatic selection of switched-on units is carried out, reserve is withdrawn, station …

Importance Of Creating A System Of Land And Cadastral Data For Subjects Of Agriculture, К. Rakhmonov

Irrigation and Melioration

The generation of electronic data using the land plot scheme while maintaining the land cadastre provides significant convenience for users. Based on this concept, the author explains the conditions, factors and elements of the formation of the contours of land within the land, which plays an important role in the land cadastral work. In particular, the elements of the contour of the earth, that is, the conditions and composition of the border, the area and the order of formation of numbers, are reflected in a separate figure. It is known that the composition of agricultural land plays an important role …

Method Of Determining The Parameters Of The Working Bodies Of The Centrifugal Fan Installed To The Sprayer, D. Dzhuraev, M.S. Halilov, I.Zh. Toirov, A.E. Urishev

Irrigation and Melioration

The article presents the data of scientists who conducted theoretical and experimental research on centrifugal fans, they refined the calculations, improved technical characteristics and aerodynamic designs of centrifugal fans. Aerodynamic and technological schemes of centrifugal fans installed to the sprayer have been developed. The theoretical and experimental studies conducted by scientists are described: Nevelson MI, Cherkassky VM, Kalinushkin MP, Ivanov O. P., Turbin B. G., on the basis of which the authors developed a method for calculating the main parameters of the working bodies centrifugal fan. Based on the developed calculation methodology, the main parameters of the working bodies of …

Experience Of Creation The Combined Power Complexes On The Basis Of Renewable Energy Sources, R.A. Zakhidov, A.I. Anarbaev, D.B. Kodirov, F.H. Mukhtarov

Irrigation and Melioration

At the article the combined energy complexes based on renewable energy sources implemented in various countries is analyzed. The regime issues of the most efficient use of maximum generation of electrical energy from solar, wind, biogas sources at reserved diesel station are given. Designs of generator modules based on a kinetic energy buffer storage device for preserving the quality of electricity from renewable energy sources with frequent changes in electrical loads of consumers are considered.

Analysis Of Results Of Researches Of Electrotechnological Treatment Of The Cotton Trouble Up To The First Crop Collection, A. Muhammadiev, A.I. Pardaev

Irrigation and Melioration

This article discusses the electrophysical characteristics of plants, more precisely the disclosure of the mechanism of electrical action on the plant through the study of the specific electrical resistance, as well as the task of developing the technological parameters of the electro-technological processing of crops. Knowledge of current value is given, passing through the minted and the rest of the cotton, determination of the negative impact of electrotechnological stamping of cotton on growth and development, yield, by electrotechnological method, including studies of the minted part of cotton, the death of the leaves, the seeds of the pests, the absence of …

Importance Of Creating A System Of Land And Cadastral Data For Subjects Of Agriculture, К. Rakhmonov

Irrigation and Melioration

The generation of electronic data using the land plot scheme while maintaining the land cadastre provides significant convenience for users. Based on this concept, the author explains the conditions, factors and elements of the formation of the contours of land within the land, which plays an important role in the land cadastral work. In particular, the elements of the contour of the earth, that is, the conditions and composition of the border, the area and the order of formation of numbers, are reflected in a separate figure. It is known that the composition of agricultural land plays an important role …

A Comparison Of The Army Corps Of Engineers Hydrologic Modeling System And Autodesk Storm And Sanitary Analysis For Hydraulic And Hydrologic Analysis And Design, Foster Josef Heifetz Campbell

Master's Theses

Hydrological and hydraulic effects of urban development is one of the key issues of study for improved water management. The addition of impervious surfaces to once pervious land and re-routing open channels and flow paths can cause flooding or declining water levels within a watershed. Many studies of these issues have found that there can be multiple factors causing hydrological and hydraulic impacts, and it can be hard to analyze and develop effective solutions without appropriate drainage software packages. However, there are multiple software packages available for use, and determining the correct one to use for a specific challenge can …

Assessing The Impacts Of Super Storm Flooding In The Transportation Infrastructure – Case Study: San Antonio, Texas, Marcio Giacomoni, Francisco Olivera, Cesar Do Lago

Publications

Flooding are likely to increase worldwide due to climate change. Large storms, referred here as superstorms, defined as events with return period equal or larger than 100 years, can lead to an increase of property damages and loss of life. The ability to predict and plan for the impacts of superstorms on transportation infrastructure is key to mitigate future damages and losses. This study analyzed 51 combinations of future projections for representative concentration pathways (RCP) 4.5 and 8.5 scenarios, which were used to calculate future 1st and 3rd quartiles, median, minimum and maximum intensity-duration-frequency curves (IDF). A HEC-HMS and GSSHA …

Hawai'i Wildlife Fund V. County Of Maui, Lowell J. Chandler

Public Land & Resources Law Review

In Hawai’i Wildlife Fund v. County of Maui, the Ninth Circuit held that the plain language of the Clean Water Act provides jurisdiction over indirect discharges of pollutants from a point source into groundwater that is shown to be connected to navigable waters. The court found that studies confirmed pollutants entering the Pacific Ocean were fairly traceable to the County of Maui’s sewage disposal wells. In affirming the district court’s ruling, the Ninth Circuit held that Maui County violated the Clean Water Act by discharging pollutants into a navigable water without the required permit. The court also concluded the …

Artificial Recharge Of Groundwater As A Management Tool For The Kabul Basin, Afghanistan, Mohammad Farid Masoom

LSU Master's Theses

Decades of war and political instability, consecutive droughts, population increase and displacement, caused serious infrastructural damages to water resources of Afghanistan. The main source of water supply for people in Afghanistan is groundwater. However, over-exploitation of groundwater has led to groundwater level declines in most parts of the country. Kabul, the largest city of Afghanistan, is the capital city with a population of 4.5 million and the fifth fastest-growing city in the world. The city has observed groundwater level declines of 5-10 meters (m) since 1980. Decline of about 30 m has also been observed in one of the monitoring …

Spot-R By Triax, Purdue Ect Team

ECT Fact Sheets Archive

Triax’s Spot-r system was developed to tackle the construction industry’s unique safety and productivity challenges, stemming from a demonstrated lack of total jobsite visibility and automatically collected, easily accessible field data. Spot-r by Triax combines a proprietary mesh network with sensor technology to record and transmit previously unattainable workforce and equipment location, activity and safety data within a defined area – all in real-time.

The Spot-r network is installed around the site and operates in a 900 MHz network, with a subset using a cellular connection to forward Spot-r sensor data to Triax’s custom, cloud dashboard. In the hazardous construction …

Purdue’S Biowall, Purdue Ect Team

ECT Fact Sheets Archive

Mechanical ventilation, energy recovery ventilation, and infiltration (air that leaks into a building) are commonly used to introduce fresh air. These are all valid approaches, but a living plant-based filter is an innovative complement to these traditional technologies. A Biowall has the potential to improve indoor air quality while reducing the quantity of air needed for ventilation, creating the potential for energy savings. Figure 1 shows a Biowall prototype being evaluated in the ReNEWW House, a research home located near the Purdue University campus (http://www.renewwhouse.com/).

Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team

ECT Fact Sheets Archive

Caterpillar developed MDP (Machine Drive Power) technology to fill this gap. Rather than an accelerometer and vibratory drum, it uses the principle of rolling resistance to provide indications of soil stiffness. This allows it to perform more reliably on cohesive and granular soils with less variability than accelerometer systems. It also means that the technology can be used on both vibratory and static drum compactors, which are often used on larger sites. While the technology is quite useful on its own, it is even better as a complementary technology to the existing accelerometer-based systems. Contractors who use vibratory soil compactors …

Evaluation Of Variable Rate Irrigation Using A Remote-Sensing-Based Model, John Burdette Barker, Derek M. Heeren, Christopher M.U. Neale, Daran Rudnick

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Improvements in soil water balance modeling can be beneficial for optimizing irrigation management to account for spatial variability in soil properties and evapotranspiration (ET). A remote-sensing-based ET and water balance model was tested for irrigation management in an experiment at two University of Nebraska-Lincoln research sites located near Mead and Brule, Nebraska. Both fields included a center pivot equipped with variable rate irrigation (VRI). The study included maize in 2015 and 2016 and soybean in 2016 at Mead, and maize in 2016 at Brule, for a total of 210 plot-years. Four irrigation treatments were applied at Mead, including: VRI based …

Integration Of Hydrogeophysical Datasets And Empirical Orthogonal Functions For Improved Irrigation Water Management, Catherine E. Finkenbiner, Trenton E. Franz, Justin P. Gibson, Derek M. Heeren, J. D. Luck

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Precision agriculture offers the technologies to manage for infield variability and incorporate variability into irrigation management decisions. The major limitation of this technology often lies in the reconciliation of disparate data sources and the generation of irrigation prescription maps. Here the authors explore the utility of the cosmic-ray neutron probe (CRNP) which measures volumetric soil water content (SWC) in the top ~ 30 cm of the soil profile. The key advantages of CRNP is that the sensor is passive, non-invasive, mobile and soil temperature-invariant, making data collection more compatible with existing farm operations and extending the mapping period. The objectives …

Datumate, Purdue Ect Team

ECT Fact Sheets Archive

Datumate is digitally transforming civil engineering processes used in construction, surveying and infrastructure inspection markets with fully automated, highly precise, cost effective and safe tools. It utilizes state-of-the-art image processing and advanced drones and camera technologies dramatically reducing the amount of time surveying crews spend in the field, speeding up construction progress checks and shortening infrastructure inspection duration, while maintaining survey grade accuracy. The intuitive, simple and automated solutions increase productivity by saving field and office time in civil engineering and inspection projects of roads, intersections, stockpile volumes, topography, piping, industrial facilities, bridges, property surveys, building facades, railways, cellular infrastructure …

Technology To Manufacture Oriented Pvc (Pvc-O) Pipes, Purdue Ect Team

ECT Fact Sheets Archive

The development of Molecor´s technology, which is based on the application of a Molecular Orientation process, has delivered a significant turning point in the pipelines sector. With this technological development, the company has begun to manufacture TOM® PVC-O pipes, the most eco-friendly pipes on the market. The Molecor technology enabled eradicating many of the existing disadvantages of thermoplastic pipes.

This technology delivers a clear objective; to provide the water industry with a solution for pipes carrying pressurized water in an environmentally friendly, yet cost efficient manner. This also extends a service life compared to pipeline materials currently in use.

The …

Simulation And Prediction Of The Groundwater Level In The Surrounding Area Of The Nebraska Management System Evaluation Area Site In Central Nebraska., Cesar Augusto Gomez Peña

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

An efficient water budget is necessary to develop sustainable practices in irrigated lands and determine future trends. Despite a lack of detailed knowledge, climate change is found to profoundly influence groundwater resources through changes in groundwater recharge, groundwater elevation, and groundwater flow processes. Prediction of the groundwater level (GWL) under a changing climate is essential to improve agricultural management.

The goal of this research is to predict the GWL from 2056 to 2060 in the surrounding area of the MSEA. In order to achieve the target, the first research task is to develop a groundwater flow model and then simulate …

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Netpoint®, Purdue Ect Team

ECT Fact Sheets Archive

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets Archive

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team

ECT Fact Sheets Archive

Fourth Quarter 2016

This is a quarterly report from the Purdue ECT.

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …