Geotechnical Engineering Commons^™

The Intrinsic Properties Of Reconstituted Soils, Nabeel Shaker Mahmood

Graduate Theses and Dissertations

Reconstituted specimens are often utilized to characterize engineering properties of cohesive soils. A series of undrained triaxial tests were conducted on reconstituted soil specimens to evaluate 1) the influence of stress path, 2) the intrinsic shear strength behavior, and 3) the small-strain characteristics. The stress path tests were conducted on kaolinite specimens reconstituted from slurries with water content values of one and one-half times the liquid limit of the soil (1.5LL). To evaluate the intrinsic undrained shear strength and the intrinsic small-strain properties, the triaxial tests were performed on kaolinite and illite specimens that were reconstituted at two levels of …

Development Of A Hydraulic Conductivity Placement Window Using Centrifuge Techniques, Greg Thomas

Civil Engineering Undergraduate Honors Theses

A centrifuge soil testing device, currently operated by researchers at the University of Arkansas, was used to develop a technique to determine a hydraulic conductivity placement window. The purpose of this research was to develop a placement window by means of a centrifuge instead of by means of a panel board. Soil specimens were created at standard PRcotor energy and at 50 percent of Standard Proctor energy at -3 percent of optimum, -1.5 percent of optimum, two specimens at optimum, +1.5 percent of optimum, and +3 percent of optimum water content. Values of hydraulic conductivity for the respective specimens were …

Introduction To Infrastructure - The Influence Of Natural Disasters On Infrastructure, Tri Tam Nguyen, Sean M. Raday, Daniel Leverick

STEM Student Research Symposium Posters

In this paper, three major hurricanes in 2017 were examined to determine the damage these hurricanes have done to the infrastructure. Infrastructure has an important role in the nation’s sustained economic development. Infrastructure consists of two main types which are “hard” infrastructure and “soft” infrastructure. Hard infrastructure is the physical networks which include transportation, power, etc. while soft infrastructure is institutions and human capital. Inadequate and inefficient performance of “hard” or “soft” infrastructure would prevent economy from achieving full growth. In the past decades, a significant increase in the number of natural disasters has had great impact on infrastructure systems. …

Hawai'i Wildlife Fund V. County Of Maui, Lowell J. Chandler

Public Land & Resources Law Review

In Hawai’i Wildlife Fund v. County of Maui, the Ninth Circuit held that the plain language of the Clean Water Act provides jurisdiction over indirect discharges of pollutants from a point source into groundwater that is shown to be connected to navigable waters. The court found that studies confirmed pollutants entering the Pacific Ocean were fairly traceable to the County of Maui’s sewage disposal wells. In affirming the district court’s ruling, the Ninth Circuit held that Maui County violated the Clean Water Act by discharging pollutants into a navigable water without the required permit. The court also concluded the …

Practical Overview Of Revised Section 918, Geosynthetics_Piccoli, Santino Piccoli

Purdue Road School

INDOT Standard Specifications Section 918, Geosynthetics, has been revised and updated, broadening the tools available to designers and contractors challenged with variable soil types and site conditions. The revision effort included harmonizing Section 200, 600, and 900 language relative to the design and use of geosynthetics. Section 918 broadly pertains to geosynthetics, which includes geotextiles, geogrids, geocells, geomembranes, and geocomposites. This session includes a practical discussion about specific changes to geotextile specifications and the addition of geotextile types.

Spot-R By Triax, Purdue Ect Team

ECT Fact Sheets Archive

Triax’s Spot-r system was developed to tackle the construction industry’s unique safety and productivity challenges, stemming from a demonstrated lack of total jobsite visibility and automatically collected, easily accessible field data. Spot-r by Triax combines a proprietary mesh network with sensor technology to record and transmit previously unattainable workforce and equipment location, activity and safety data within a defined area – all in real-time.

The Spot-r network is installed around the site and operates in a 900 MHz network, with a subset using a cellular connection to forward Spot-r sensor data to Triax’s custom, cloud dashboard. In the hazardous construction …

Purdue’S Biowall, Purdue Ect Team

ECT Fact Sheets Archive

Mechanical ventilation, energy recovery ventilation, and infiltration (air that leaks into a building) are commonly used to introduce fresh air. These are all valid approaches, but a living plant-based filter is an innovative complement to these traditional technologies. A Biowall has the potential to improve indoor air quality while reducing the quantity of air needed for ventilation, creating the potential for energy savings. Figure 1 shows a Biowall prototype being evaluated in the ReNEWW House, a research home located near the Purdue University campus (http://www.renewwhouse.com/).

Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team

ECT Fact Sheets Archive

Caterpillar developed MDP (Machine Drive Power) technology to fill this gap. Rather than an accelerometer and vibratory drum, it uses the principle of rolling resistance to provide indications of soil stiffness. This allows it to perform more reliably on cohesive and granular soils with less variability than accelerometer systems. It also means that the technology can be used on both vibratory and static drum compactors, which are often used on larger sites. While the technology is quite useful on its own, it is even better as a complementary technology to the existing accelerometer-based systems. Contractors who use vibratory soil compactors …

Where There Is No Engineer Chapter 06, Liam Mccarton, Sean O'Hogain

Books/Book Chapters

This chapter summarises the learning outcomes from the design program.

Failure Of The Alexander Dam Embankment And Reconstruction Using Drainage Mitigation On Kauai, Hawaii, 1930-1932, Kerry D. Cato, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Alexander Dam is a hydraulic fill earth dam and the second-highest embankment dam in Hawaii, having been built in 1929-1932 on the south side of the Hawaiian island of Kauai to provide irrigation for McBryde Sugar Company Ltd. It was constructed across Wahiawa Stream mauka (Hawaiian for "stream that comes from the mountains," literally "toward the mountains"), upstream of Kalaheo, to store 800 million gallons (5 million m3) of water to irrigate sugarcane fields. The embankment dam was intended to have a maximum height of 125 ft (38 m), a crest length of 620 ft (189 m), and a maximum …

John Frank Stevens: Panama Canal Mastermind And Pioneering Railroad Pathfinder, J. David Rogers, Lawrence M. Magura

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

John Frank Stevens began his civil engineering career as a rodman on a survey crew in Maine in 1872. He soon moved to Minneapolis, where he apprenticed himself, eventually becoming Assistant City Engineer. In 1876 he began working for railroads in the western United States. In 1882 Stevens began working for a contractor laying tracks for the Canadian Pacific Railroad in Saskatchewan. The next spring he became assistant engineer of location for the Canadian Pacific, completing the first transcontinental line linking Montreal with Vancouver in 1888. In 1889 James Jerome Hill retained Stevens as chief pathfinder for the new Great …

Performance Of The Grout Curtain At The Kentucky River Lock And Dam No. 8, Robert C. Hatton

Theses and Dissertations--Civil Engineering

Karst bedrock conditions and deterioration of the lock and dam structures have resulted in significant leakage through, underneath, and around Lock and Dam No. 8 on the Kentucky River. During severe droughts, the water surface in Pool No. 8 has been observed to drop below the crest of the dam, resulting in water supply shortages and water quality issues for surrounding communities reliant on the pool. Presently, the primary purpose of Lock and Dam No. 8 is water supply. Pool No. 8 is currently where the cities of Nicholasville (Jessamine County, KY) and Lancaster (Garrard County, KY) draw their water. …

Performance Of Two Tieback Walls And Rock Anchors In A Shale Stratum, Jorge Octavio Romana Giraldo

Theses and Dissertations--Civil Engineering

Tieback walls are typically design based on predetermined pressure distribution; however, these pressures were proposed based on performance of excavations. For retaining walls used in slope remediation, the application of these pressures might not be adequate; the construction procedure; therefore, a different response of the wall is expected. This document, presents the performance of two tieback walls installed in a shale stratum. Monitored responses is correlated with construction activities; these activates implied excavation and backfilling in both of the tieback walls. In addition, this research shows a numerical procedure to evaluate the anchor capacity based on the t- z approach. …

Direct Measurement Of Crosstie-Ballast Interface Pressures Using Granular Material Pressure Cells, Travis James Watts

Theses and Dissertations--Civil Engineering

The magnitudes and relative pressure distributions transmitted to the crosstie-ballast interface of railroad track significantly influences the subsequent behavior and performance of the overall track structure. If the track structure is not properly designed to distribute the heavy-axle loads of freight cars and locomotives, deficiencies and inherent failures of the crossties, ballast, or underlying support layers can occur, requiring substantial and frequent maintenance activities to achieve requisite track geometrical standards. Incorporating an understanding of the pressure distribution at the crosstie-ballast interface, appropriate designs can be applied to adequately provide a high performing and long-lasting railroad track. Although this can be …

Hydrologic Monitoring And 2-D Electrical Resistivity Imaging For Joint Geophysical And Geotechnical Characterization Of Shallow Colluvial Landslides, Matthew M. Crawford

Theses and Dissertations--Earth and Environmental Sciences

Landslide characterization and hazard assessments require multidisciplinary approaches that connect geologic processes with geotechnical parameters. Field monitoring of hydrologic variables such as water content and water potential, coupled with geoelectrical measurements that can establish relationships used for geotechnical and landslide hazard investigations is deficient.

This study brings together different techniques to develop a methodology that connects geoelectrical measurements and shear strength. A field-based framework was established that includes (1) analysis of long-term soil moisture fluctuations within different landslides (2) establishment of constitutive and new equations that test the use of electrical conductivity to predict soil-water relationships and shear strength (3) …

Stability Analysis And Design Charts For A Sandy Soil Slope Supporting An Embedded Strip Footing, Emmanuel Baah-Frempong, Sanjay Kumar Shukla

Research outputs 2014 to 2021

In several field situations, especially in the hilly terrains, the construction of footings on slopes becomes essential. The factor of safety of a slope supporting a loaded footing on the crest is dependent on the position of the footing from the crest edge. Most studies in the past have focused on analysing the bearing capacity and settlement behaviour of a footing resting on a slope crest, but foundations in most infrastructure projects are usually built at some depth below the ground surface. Therefore, the availability of some form of design charts for determining the factor of safety of a slope …

Imaging The Subsurface In Eastern Part Of Lake Chesterfield Using A Combination Of Geophysical Tools, Jiawei Li

Masters Theses

"The Lake Chesterfield North Dam in Wildwood city, Missouri has been leaking, more or less continuously since the dam was constructed in 1986 despite mitigation efforts in 1988, 1994, 1995, 2004, and 2005. Neither the grouting efforts in 1988, 1994, 1995, 2004 or 2005, nor the placement and rehabilitation of an impervious clay liner in 2005 has solved the problem. Indeed, in June of 2017, the water level in Lake Chesterfield dropped at an alarmingly rapid rate.

Prior to authorizing additional mitigation work, the Lake Chesterfield Home Owners Association (LCHOA) decided to acquire geophysical data across the dry lake bed. …

Experimental Study Of Hydraulic Conductivity Of A Soil-Bentonite Cutoff Wall, Landon Crawford Barlow

Master’s Theses

Soil-bentonite (SB) cutoff walls are commonly employed in the US to control groundwater flow and subsurface contaminant migration. In these applications, both the short-term (as built) integrity of the barrier and the potential for degradation in the integrity of the barrier over time are of critical importance. Although many laboratory studies have been conducted to investigate the performance of SB cutoff walls as hydraulic barriers and the various factors affecting this performance, field investigations are scarce. With support from the National Science Foundation, a 200 m long, 7 m deep, and 0.9 m wide SB cutoff wall has been designed, …

Effects Of Gradation And Moisture Content On Resistivity Of Mechanically Stabilized Earth Wall Backfill Materials, Jose Luis Arciniega

Open Access Theses & Dissertations

The service life of mechanically stabilized earth (MSE) walls depends on the corrosion rate of the metallic reinforcement used in their construction. The resistivity of the backfill aggregates needs to be measured accurately in order to estimate realistically the corrosion rate of the reinforcement. Resistivity testing is usually performed using the traditional soil box on the portion of the aggregates that passes a No. 10 or No. 8 sieve to either select or reject the backfill. For a more reasonable characterization of the corrosivity of coarse backfills, it is desirable to use their actual gradations. To that end, several resistivity …

Back Calculation Of Intelligent Compaction Data For Mechanical Properties Of Soil System, Afshin Gholamy

Open Access Theses & Dissertations

For national economy, it is very important to have a reliable infrastructure. Because of this, all over the world, new roads are constantly being built and old roads are being maintained and, if necessary, expanded and/or repaired. Building a good quality road is very expensive, it costs several million dollars per kilometer. It is therefore crucial to make sure that the newly built and newly repaired roads are sufficiently stiff - so that they can withstand the predicted volume of traffic for a sufficient number of years. Current methods of estimating the stiffness are time-consuming and labor-consuming. The most accurate …

Onshore-Offshore Velocity Models North Of The Mendocino Triple Junction In Northern California, Alan Jacquez

Open Access Theses & Dissertations

The Mendocino Triple Junction (MTJ) marks the boundary where the Gorda plate, North American Plate, and Pacific Plate meet, separating the Cascadia subduction zone to the North from transform tectonics of the San Andreas plate boundary. This actively deforming region experiences high seismic activity and young geological features. Here we examine offshore and onshore seismic wide-angle reflection and refraction data north of the MTJ crossing the Cascadia subduction zone from offshore northern California to the Western edge of the Sierra Nevada. We image subsurface structures in this region by creating P-wave velocity models using datasets collected in 1993 to 1994 …

Geospatial Relationship Of Intelligent Compaction Measurement Values With In-Situ Testing For Quality Assessment Of Geomaterials, Luis Alberto Lemus

Open Access Theses & Dissertations

The implementation of Intelligent Compaction (IC) in the construction of transportation infrastructure as a tool for quality control of compacted geomaterials has attracted the attention of a number of highway agencies. Compaction quality has been conventionally assessed using density, and to a less extent, modulus-based spot measurements at selected locations along the roadway section. While spot measurements do not provide a thorough rendition of the level of compaction of the roadway, IC technology is effective in meeting full coverage requirements. IC roller measurements are accelerometer-based measurements recording machine-ground interaction assumed to be indicative of the stiffness of the compacted geomaterial. …

Evaluation Of Recycled Gypsum Application Dosages To Enhance The Water Infiltration Rate At Water Retention Ponds, Jorge Luis Navarrete

Open Access Theses & Dissertations

The retention ponds play central role for efficient collection, removal, and drainage of rainfall runoff from surrounding streets to minimize flooding and damage. However, low percolating retention ponds may result in an extended ponding of water, abundance bacteria accumulations, mosquito breeding, environmental hazards, among others. The presence of clayey soils and soil sodicity reduces infiltration rates of retention ponds. To enhance the infiltration rate of ponds, it is proposed to use recycled gypsum (RG), as a soil amendment in retention ponds consisting of clayey soils to enhance low infiltration rates.

To evaluate the influence of RG in clayey soils as …

Assessment Of Backfill Hydraulic Conductivity In An Instrumented Soil-Bentonite Cutoff Wall, Landon Barlow, Michael A. Malusis

Faculty Conference Papers and Presentations

The objective of this paper is to present a comparison of measured hydraulic conductivities (k) for soil-bentonite (SB) backfill within a 60-m-long section of a 200-m-long, 7-m-deep cutoff wall constructed and instrumented for studying SB backfill properties and variability at the field scale. Backfill k was measured using flexible-wall tests (70-mm diameter) on remolded specimens prepared from surface grab samples collected during construction; flexible-wall tests on undisturbed specimens collected from the wall; larger-scale rigid-wall tests (150-mm diameter) on remolded specimens prepared from grab samples; and slug tests conducted within the wall. Applied effective stresses in the laboratory tests …

Probabilistic Regional Landslide Hazard Assessment For The Enguri Dam (Jivari, Georgia), Maria Diletta Acciaro

Dissertations, Master's Theses and Master's Reports

The Enguri Dam forms a reservoir in a seismically active area in the foothills of the Caucasus Mountain range near Jvari, Georgia. The slopes are steep, highly fractured, and weathered, which make them at risk to failure during or following extreme rainfall events. Hydroelectricity produced by the water retained by the 271-m dam provides almost half of the electricity for the country. The reservoir perimeter is more than 40 km and the surrounding slopes span an area of more than 30 km2. The size of the area and paucity of slope data have made slope-failure hazard assessment of the broader …

Analyzing The Life-Cycle Of Unstable Slopes Using Applied Remote Sensing Within An Asset Management Framework, El Hachemi Y. Bouali

Dissertations, Master's Theses and Master's Reports

An asset management framework provides a methodology for monitoring and maintaining assets, which include anthropogenic infrastructure (e.g., dams, embankments, and retaining structures) and natural geological features (e.g., soil and rock slopes). It is imperative that these assets operate efficiently, effectively, safely, and at a high standard since many assets are located along transportation corridors (highways, railways, and waterways) and can cause severe damage if compromised. Assets built on or around regions prone to natural hazards are at an increased risk of deterioration and failure. The objective of this study is to utilize remote sensing techniques such as InSAR, LiDAR, and …

Soil Improvement Using Microbial Induced Calcite Precipitation And Surfactant Induced Soil Strengthening, Matthew P. Davies

UNF Graduate Theses and Dissertations

Microbially induced calcite precipitation (MICP) has been used for a number of years as a technique for the improvement of various geological materials. MICP has been used in a limited capacity in organic rich soils with varying degrees of success. Investigators hypothesized that microbially-induced cementation could be improved in organic soils by using a surfactant. Varying amounts of Sodium Dodecyl Sulfate (SDS) were added to soils of varying organic content and a mixing procedure was used to treat these soils via MICP. Treated specimens were tested for unconfined compressive strength (UCS). Results appeared to show direct relationships between SDS content …

Potential Replacement Of The Us Navy's Rapid Penetration Test With The Method Of Multichannel Analysis Of Surface Waves, William Fletcher

UNF Graduate Theses and Dissertations

The United States Navy (USN) currently utilizes a Rapid Penetration Test (RPT) on both land and in water as the means to determine whether sufficient soil bearing capacity exists for piles in axial compression, prior to construction of the Elevated Causeway System (Modular) [ELCAS(M)] pile-supported pier system. The USN desires a replacement for the RPT because of issues with the method incorrectly classifying soils as well as the need to have a less labor-and-equipment-intensive method for geotechnical investigation.

The Multichannel Analysis of Surface Waves (MASW) method is selected herein as the potential replacement for the RPT. The MASW method is …

Development Of Forward And Inversion Schemes For Cross-Borehole Ground Penetrating Radar, Donald Jones

UNF Graduate Theses and Dissertations

Tomography is an imaging technique to develop a representation of the internal features of material using a penetrating wave, such as an electromagnetic wave. The calculation method used is an example of an inverse problem, which is a system where the input and the output are known but the internal parameters are not. These parameters can be estimated by understanding the responses of a penetrating wave as it passes through the unknown media. A forward problem is just the opposite; the internal structure and input penetrating wave is known and the output is determined. For both forward and inverse problems, …

Tire-Derived Geo-Cylinders And Polymer Products For Enhancing The Properties Of Base/Sub Base Materials In Pavement Systems, Justin Scott Smith

Graduate Theses, Dissertations, and Problem Reports (ETD)

As a critical part of the transportation network, pavements offer a safe means for vehicular traffic. Pavements are subjected to many forms of stress during their service life, and they are susceptible to environment related cracking and failures. Failures can be attributed to poor subgrade, freeze-thaw variations, and fatigue under repetitive axle loadings. Reinforcement products such as tire-derived geo-cylinders (TDGC) which make-up mechanical concrete and geo-polymers have been utilized in civil engineering practice, and this research aims to understand the potential life of tested pavement system components set at displacement limitations when reinforced with TDGCs and geo-polymers from exposure to …