Geotechnical Engineering Commons^™

Minimizing Surface Run-Off, Improving Underground Water Recharging, And On-Site Rain Harvesting In The Kathmandu Valley, Ambika P. Adhikari, Keshav Bhattarai

Himalayan Research Papers Archive

Nepal's political institutions and administrative units were thoroughly restructured in 2015 with the promulgation of the new Constitution. Several rural areas were combined to meet the definition of urban threshold criteria to classify rural areas into urban categories. Accordingly, over 3,900 local political and administrative units were amalgamated into 753 units, of which, 293 units are classified as urban. Within these newly defined urban areas, many natural environments have been converted into impervious surfaces such as paved roads, sidewalks, and building roofs. These impervious surfaces have drastically increased the amount of surface run-offs-often termed as "urban floods"--under increasing precipitation caused …

Compound Flooding In Convergent Estuaries: Insights From An Analytical Model, Ramin Familkhalili, Stefan Talke, David A. Jay

Civil & Environmental Engineering Faculty Publications

We investigate here the effects of geometric properties (channel depth and cross-sectional convergence length), storm surge characteristics, friction, and river flow on the spatial and temporal variability of compound flooding along an idealized, meso-tidal coastal-plain estuary. An analytical model is developed that includes exponentially convergent geometry, tidal forcing, constant river flow, and a representation of storm surge as a combination of two sinusoidal waves. Nonlinear bed friction is treated using Chebyshev polynomials and trigonometric functions, and a multi-segment approach is used to increase accuracy. Model results show that river discharge increases the damping of surge amplitudes in an estuary, while …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

North 14th Street Corridor Improvements Project, Ashley Nguyen, Samantha Corey, Maricela Paramo Reyes, Pooja Rajeev

Honors Program: Senior Projects (Public)

The following project report was a study of the North 14^th Street corridor ranging from Adams Street to Virginia Street conducted by University of Nebraska-Lincoln students for a senior design capstone project. Main focuses of the project were the intersection of Adams and 14^th Street and the 14^th Street bridges over Cornhusker Highway and Oak Creek. Study of this area included work in transportation, traffic, structural, geotechnical, water resources, and environmental engineering. However, this report done by students should not take the place of work done by licensed professional engineers.

This project was done in collaboration with …

Identification Of Phosphorous Loading Point Source Facilities To 303(D) Listed Nutrient Impaired Waters Through Watershed Delineation Using Arcgis For Life Cycle Assessment Applications, John Zimmerman

Chemical Engineering Undergraduate Honors Theses

The work done for this project is part of a larger “life cycle assessment (LCA) of novel electrochemical phosphorus recovery technology at the wastewater treatment plant and U.S. watershed scales” (Morrissey 2019). The goal of that LCA is to determine “environmental impacts of implementing electrochemical struvite recovery at the wastewater treatment plant, U.S watershed, and global scales” (Morrissey 2019). This project’s goal is to identify locations deemed more sensitive to eutrophication impacts. The results will be used as part of the life cycle inventory (LCI) accounting for geographically explicit phosphorus flows. The waters identified as impaired were sourced from the …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

Develop A Multi-Functional Green Pervious Concrete (Mgpc) Pavement With Polycyclic Aromatic Hydrocarbons (Pahs) Removal Function., Hong Shang

Electronic Theses and Dissertations

Stormwater runoff induced Polycyclic Aromatic Hydrocarbons (PAHs) contaminant increasingly imperils the groundwater quality and the sustainable development of human society due to the potential carcinogenic risks. Pavement can be considered as the first line of defense for contaminant removal of the stormwater runoff. New construction materials with stormwater runoff quantity and quality control are in urgent demand for updating the existing pavement system. An innovative material called Multi-functional Green Pervious Concrete (MGPC) was developed in the department of Civil and Environmental Engineering at University of Louisville. This material uses organoclay as the amendment to enhance the PAHs removal capacity of …

Analysis Of Shear-Strength In Weathered Shale Strata Along A Highway Slope Failure Site In Northwest Arkansas, Olivia Overton

Civil Engineering Undergraduate Honors Theses

Slope failures cost millions of dollars per year to repair and can be deadly. Accurate modeling of slope conditions, including soil parameters, water table locations, and depth to bedrock, are essential to determining the overall stability of a slope. This project is a continuation of the work completed in 2019 by a former University of Arkansas researcher, Vanessa LeBow. LeBow RocScience used Slide2 modeling software to model two highway embankment slopes in Northwest Arkansas that experienced slope movement to determine whether increased use of geophysical data could increase the accuracy of slope stability models. A parametric study of shear strengths …

2021 Final Butte Reduction Works (Brw) Smelter Area Mine Waste Remediation And Contaminated Groundwater Hydraulic Control Site Phase Iii Quality Assurance Project Plan (Qapp), Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Revised Draft Final Butte Reclaimed Areas Maintenance And Monitoring (M&M) Plan In Accordance With Butte Reclamation Evaluation System (Bres), Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Erosion And Sediment Controls On Reclaimed Mine Refuse Impoundments, Sara Dalen

Graduate Theses, Dissertations, and Problem Reports (ETD)

To ensure the sustainable use of one of West Virginia’s precious resources, conscientious long-term management of residual waste is of immense importance. This thesis examined two main topics: i) the dewatering process of acid mine drainage (AMD) sludge, and ii) an investigation of soil loss predictions of a reclaimed coal refuse impoundment.

The first aspect of this thesis addresses clarification and remediation of AMD prior to disposal is a prominent component to preventing runoff and seepage of environmentally detrimental byproducts. To examine the effects of flocculation and dewatering more closely by means of geotextiles, an AMD sludge was analyzed. The …

The Stability Of Nanobubbles And Its Application In Contaminated Sediment Treatment, Shaini Dilsha Aluthgun Hewage

Dissertations

This dissertation consists of two sections. First, nanobubbles' stability and behavior are studied using experimental and theoretical approaches. Second, nanobubbles application combined with ultrasound to remediate contaminated sediments is discussed.

The stability study consists of four sections. (i). Laboratory investigation to determine bubble size distributions and zeta potentials for different gases, pH levels, temperatures, and salt conditions. (ii). A theoretical study based on the diffused double layer theory to explain nanobubbles' behavior in different NaCl concentrations. (iii). Nanobubbles' stability in electrolyte solutions under different ion valencies using deionized water, NaCl, Na₂SO₄, Na₃PO₄, …

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola

Civil Engineering Theses

The surface deflection bowl data collected through Non-Destructive Testing (NDT) has been widely utilized by various Department of Transportation (DOTs) in the South-Central States and other places. The primary purpose of using deflection-based NDTs in network-level assessment is to identify a weak pavement section that requires further analysis at the project level. The falling weight deflectometer (FWD) test is one of the common NDT based tests utilized by highway agencies in assessing the performance of the flexible pavement. However, a robust method to evaluate pavement sections utilizing FWD data from all the sensors are seldom developed. There is always a …

Analysis Of Semi-Arid Riparian Environments Using Satellite Imagery, Kira Overin

Graduate Theses & Non-Theses

Semi-arid riparian environments are at risk of being over-exploited or degraded due to increased water usage associated with growing housing demands. Trends surrounding these developments can be monitored using freely available Landsat satellite imagery in conjunction with seasonal stream discharge rates. This project focuses on a stream system located southwest of Ennis, Montana, where population is growing rapidly. It aims to characterize the connection between variable discharge rates in small-scale riparian environments and adjoining vegetation health, while considering possible implications of continued urbanization. Methods for preventing riparian ecosystem degradation and promoting resilience are also discussed.

St. Mary And St. Anne Cathedral, Cork: An Optimum Heating Solution For Heritage Buildings?, Christopher Shiell, Roger P. West

Civil Engineering Research in Ireland 2020

Cathedrals and most churches are characterised by having large internal, undivided spaces and permeable building envelopes. They are often used little, intermittently, but predictably and, in spite of the fact that they are unique in still being largely used for the purpose for which they were built many centuries ago, they are now often used for additional purposes, for which they were never designed. These uses include concerts, graduation ceremonies, filming and a host of other uses all of which require a level of thermal comfort not envisaged by the original builders. Research was undertaken by the authors into the …

Challenges And Opportunities To Deep Retrofitting Of Traditional Fabric Buildings To Achieve Nearly Zero Energy Building (Nzeb), Maria Lopez Zambrano, Paul Kenny, Jamie Goggins

Civil Engineering Research in Ireland 2020

Many of our traditional buildings are disappearing or in danger of being under utilised because they are not comfortable for modern day living and do not meet our present day needs. If a building does not have a use, inevitably it deteriorates and eventually becomes a ruin or gets demolished. It is important to retrofit these buildings, which are part of our identity and can be powerful tourist attractions even though most of them are not listed. Some owners want to apply for retrofitting schemes and grants, but they are rejected because there are no standard solutions to achieve low …

Can Deap Help Us To Predict The Energy Demand And Indoor Temperature Of Homes Before And After Renovation? A Case Study From Dublin, Paul Moran, Jamie Goggins

Civil Engineering Research in Ireland 2020

Improving the energy efficiency of buildings via retrofitting is seen as one of the key mitigation measures to reducing the energy demand and carbon emissions of the built environment in Ireland. However, while energy efficiency retrofits for buildings are effective in theory, the energy savings estimated by statistical or engineering models can often be inaccurate. The Domestic Energy Assessment Procedure (DEAP) is the standard assessment procedure used for assessing the energy performance standard of residential buildings in Ireland. This paper examines the gas energy demand for space and water heating and the internal temperature profiles in contrast to DEAP estimates …

Operational And Embodied Energy Analysis Of 8 Single-Occupant Dwellings Retrofit To Nzeb Standard, Richard O'Hegarty, Shane Colclough, Oliver Kinnane, Donal Lennon, Etienne Rieux

Civil Engineering Research in Ireland 2020

In line with the Energy Performance of Buildings Directive, Irish dwellings are being retrofit to near Zero Energy Building (nZEB) standards - with a number of the deep energy retrofits classified as A-rated. As a result of the low operational energy, the embodied energy share of an nZEB's life cycle energy is significantly increased. Therefore, to obtain a holistic picture of the change in energy profile of buildings, the embodied energy of the material added to achieve that low performance should also be taken into account. This paper presents results from a case study of 8 single-occupant terrace bungalows retrofit …

The Broader Development Of The Student Engineer Through Industry Based Experiential Learning, Donogh Coleman, Ted Mckenna, Mary Moloney

Civil Engineering Research in Ireland 2020

The global drive for industry-aware and industry-ready engineering graduates, has led to the development and integration of experiential learning through work placements. Industry is looking to recruit graduates with not just the requisite technical engineering skills, but also graduates with inter alia high levels of teamwork and communications skills. This has been recognised by CIT with the integration of work placement in most of its undergraduate programmes. This paper provides an overview of the student placement process in the Department of Civil, Structural and Environmental Engineering at CIT, includes the work placement alternative which was implemented due to the COVID-19 …

Art In Engineering: Evoking A Creative Response From Engineering Students And More, Jamie Goggins, Marta Fuente, Eamonn Madden

Civil Engineering Research in Ireland 2020

The concept of creativity being only associated with writers, painters, and artistic professions is outdated. The future engineer must embrace maths, art and creativity to unlock innovative solutions. Traditional engineering courses with an emphasis predominately on maths and science can produce graduates who are constrained in developing design solutions without creativity to unlock innovative solutions. This paper describes a short course introduced in the School of Engineering at NUIGalway in 2018 to expose students to creative thinking research and principles and engage in various forms of creative expression (photography, painting and essay writing) to articulate their response to a set …

Teaching Of Structural Analysis Into The Future, Dermot O'Dwyer

Civil Engineering Research in Ireland 2020

The engineering curriculum has always been full. In the past civil and structural engineers studied a wide variety of technical subjects within the broad field of engineering science and spent many hours working on design projects. Modern engineering curricula try to cover these areas while also dedicating more time to structured group-work, report writing and communication skills. Although students spend longer in college the number and range of technical fields that students must master is considerably larger than in the past. As a result the time available to any one topic area has reduced. At the same time the work …

Loading On Long Span Bridges In Heavily Trafficked Areas, Michael Quilligan, Eugene O'Brien

Civil Engineering Research in Ireland 2020

The critical traffic loading condition for long-span bridges is congestion when vehicles may be closely spaced together. Data on very high traffic flows is limited however, as induction loops which are typically used to collect traffic data, are ineffective when traffic flow breaks down. A number of long span bridges are located in areas of high traffic with periods of recurring congestion occurring daily. While the inter-vehicle gap distances are greater than those occurring during non-recurring full stop accident type events, the high frequency of the recurring congestion events can increase the probability of a critical load case occurring.

A Numerical Study Of The Effect Of Wind Barriers On Traffic And The Bridge Deck, Yuxiang Zhang, Philip Cardiff, Jennifer Keenahan

Civil Engineering Research in Ireland 2020

Wind actions can have a great impact on both bridges and traffic on bridges. However, structures designed to shelter the traffic from wind can influence the aerodynamic performance of the bridge deck, especially for long-span bridges. This study compares the effect of non-perforated walls and perforated walls used as wind barriers for traffic by conducting Computational Fluid Dynamics (CFD) simulations on three-dimensional geometries of a four-lane bridge deck. Steady-state simulations employ the Reynolds-Averaged Navier Stokes (RANS) method with the k-epsilon turbulence model and all simulations use parallel computing. An open-sourced software OpenFOAM is used.

Long-Run Traffic Simulations For Multi-Lane Road Bridges, Róisín Donnelly, Lorcan Connolly, Ilaria Bernardini

Civil Engineering Research in Ireland 2020

The maintenance and repair of ageing bridges is a concern for road infrastructure managers. This issue is amplified by the increasing weights and frequency of travel of freight vehicles in recent times. In order to accurately assess the risk of damage for road bridges, it is essential to have knowledge of both historical and current bridge loading. When available, site-specific Weigh-in-Motion (WIM) data can be effective in creating representative load models for a structure. However, for cases where WIM data is not available and in cases where future damage must be predicted, it is necessary to simulate appropriate data using …

Simulation Of Traffic Loading On Long Span Bridges, Hang Zhang, Michael Quilligan

Civil Engineering Research in Ireland 2020

Existing long span load models have typically been developed using a number of conservative assumptions, and as such are more applicable to the design of new bridges rather than the assessment of existing structures. Excessive conservatism in such assumptions can lead to expensive and unnecessary interventions in existing bridges. Furthermore, existing load models do not always allow for correlations in traffic weights and vehicle positions on the bridge.

Repair & Rehabilitation Of Daly's (Shakey) Bridge, Cork City, Michael Minehane, John Gamble

Civil Engineering Research in Ireland 2020

This paper describes the rehabilitation of (Shakey) Bridge, an existing single-span suspension bridge crossing the northern channel of the River Lee in Cork City. The bridge was opened in 1927 to replace an earlier ferry crossing at the same location. Daly’s bridge is included on the Record of Protected Structures and the National Inventory of Architectural Heritage. It remains the only suspension bridge in Cork City and is the only surviving bridge of its kind in Ireland. It is considered to be a significant contributor to the architectural heritage of the city. This case study describes the project development including …

Development And Testing Of A Deployable Double Layer Tensegrity Grid, Michael Quilligan, Valentin Gomez-Jauregui, Cristina Manchado, Cesar Otero

Civil Engineering Research in Ireland 2020

Tensegrity is a structural principle based on the use of isolated or contiguous pin jointed components in compression inside a net of continuous tension. Although the concept has been studied for many decades, relatively few examples of tensegrity structures have been used for civil engineering purposes.

Reinforcement Of Timber Elements In Compression Perpendicular To The Grain Using Compressed Wood Dowels, Michael Conway, Conan O'Ceallaigh, Sameer Mehra, Annette M. Harte

Civil Engineering Research in Ireland 2020

In the past decade, there has been an increased focus on the environmental impacts of construction and a movement towards more sustainable construction products. Timber is one such sustainable product that can achieve these environmental targets but, while timber has a high strength-to-weight ratio parallel to the grain, it demonstrates poor strength perpendicular to the grain. As a result, stress perpendicular to the grain is an important factor in the design of timber structures, especially in areas of concentrated loading, such as supports. This paper describes a study, which examines the use of compressed wood dowels as a sustainable alternative …

An Evaluation Of Design Issues Identified During Reviews Of Structural Designs Of Buildings From 2015 To 2020, Patrick Crean, Richard Osborne

Civil Engineering Research in Ireland 2020

A recent study on failures of structures in Ireland indicated that approximately 40% could be apportioned to designer error. A 2019 report into recent structural cracking of a high-rise building in Sydney Australia recommended that Independent third party checking by a Chartered Engineer should be a requirement on all major projects prior to construction. The report also stated that the critical elements of the design on these projects should be identified. It is obvious that a certain percentage of buildings constructed each year contain design flaws and only a small proportion of these ever result in a failure. However there …