Geotechnical Engineering Commons^™

A Two-Stage Direct Integration Approach To Find The Railway Track Profile Using In-Service Trains, Yifei Ren, Jennifer Kennahan, Eugene O'Brien

Civil Engineering Research in Ireland 2020

The railway track is an important element in transportation networks. In recent years, drive-by monitoring of railways has become more popular. Using data measured from in-service trains, the railway profile can be found. In previous research, a complex optimiziton method is used to calculate the railway profile. This paper introduces a new two-stage direct integration approach to find the same track profile much more efficiently. The calculated track profile is similar to a ‘true’ profile and can be used to monitor the condition of the track.

Investigating The Contact-Point Response For Drive-By Damage Detection In Bridges, Robert Corbally, Abdollah Malekjafarian

Civil Engineering Research in Ireland 2020

Bridges are critical elements in any road or rail transport network and ensuring their safety is paramount. Recent years have seen significant research efforts to develop cost-effective techniques for bridge monitoring on a large scale. Drive-by bridge inspection techniques, whereby sensors inside a vehicle are used to monitor bridge condition, are at the focus of much of this work. This paper develops a relationship between the measured response in a vehicle and the contact-point response between the wheel and the surface of a bridge using a quarter-car representation of the vehicle. Numerical simulations are carried out to examine the feasibility …

Application Of The Iec Technical Specification For Assessment Of Wave Energy Resource: A Case Study From The West Coast Of Ireland, Iulia Anton, Stephen Nash

Civil Engineering Research in Ireland 2020

There is significant interest globally in harnessing our ocean wave energy resource, estimated at approximately 30,000 TWh/year. The key to this is understanding the resource. The International Electrotechnical Commission (IEC) has developed a technical specification for the evaluation of wave energy resource, IEC-TS 62600- 101: Wave energy resource assessment and characterization. This research applies the IEC standard for a resource characterization study of the Atlantic Marine Energy Test Site on the west coast of Ireland. A key focus is the comparison of the detailed IEC validation approach using scatter diagrams with the traditional timeseries validation approach. Coarse (0.005°) and fine …

Wind Power Prediction And Early Downtime Detection For Ireland, Vikram Pakrashi, Basuraj Bhowmik, Juan Manuel González-Sopeña, Paul Mucchielli, Bidisha Ghosh

Civil Engineering Research in Ireland 2020

Wind energy must be commercially competitive to be economically sustainable. Existing wind farms in Ireland must be more efficient to meet the 2009 EU Renewable Energy Directive target of 7% of total energy demand from onshore wind energy farms, which is 45% of the total national renewable energy target of 16%. WindPearl - a Sustainable EnergyAuthority of Ireland (SEAI) funded project is currently looking into improvin operations & maintenance (O&M) of onshore wind turbine farms in Ireland.

An Experimental Investigation Of The Optimum Properties And Conditions For Use Of Anionic Emulsions In Road Maintenance Applications, Simonas Ignatavicius, Alan Kavanagh, David Colleran, Michael J. Brennan, Shane Newell

Civil Engineering Research in Ireland 2020

Bitumen emulsions are used for a range of road maintenance applications, including surface dressing, gravel seals, slurry seals, tack coating, cold-mix asphalt and in situ pavement recycling. The emulsions used can be classified as being either cationic (i.e. possessing a positive electrostatic surface charge) or anionic (i.e. carrying a negative electrostatic surface charge). The vast majority of emulsions used for such applications in Europe are cationic, while anionic bitumen emulsions are used widely throughout North America and Africa. The aims of the experimental study described in this paper were (a) to investigate why one or the other emulsion type is …

A Review Of Vision Based Methods For Pothole Detection And Road Profile Analysis, Darragh Lydon, Su Taylor, Myra Lydon, Julia Early

Civil Engineering Research in Ireland 2020

This paper is an overview of the development and application of Computer Vision for the detection of pothole, pavement distress and road profile analysis and categorisation. A brief explanation of the traditional methods for determining these factors is given, followed by a chronological description of the evolution and the challenges of using Computer Vision (CV) approaches to determine these conditions. The paper is separated into sections aligned to image capture and analysis methodologies. Qualitative evaluations and comparison of these methods have been provided along with the proposal of guidelines for new computer vision-based road analysis systems.

Analysis And Optimisation Of Tii’S Pams Reset Values And Deterioration Models For Irish Pavement Conditions, James Quinn, Raymond Mcgowan, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ireland has a national road network of approximately 5300km that is managed by Transport Infrastructure Ireland (TII). TII create yearly pavement maintenance and renewal programs from the operation of a Pavement Asset Management System (PAMS). Accurate pavement deterioration models and reset values are an essential part of PAMS and are required for life cycle cost analysis (LCCA). Pavement maintenance and renewal schemes are prioritised based on the LCCA's largest benefit to cost ratio, and therefore optimise the annual pavement maintenance and renewal budget. Currently, TII implement pavement deterioration models and reset values from Austria's and Belgium's PAMS, and are not …

An Analysis Of The Effectiveness Of Bitumen Additives On The Performance Of Pavement Surface Dressings, Alan Anderson, John Casserly, Alan Kavanagh, Jim Campbell

Civil Engineering Research in Ireland 2020

Surface dressing is a maintenance technique that uses thin layers of bitumen emulsion and single sized aggregates. The surface dressing process seals and binds the surface of a road to protect its substructure from water ingress. It also provides increased skid resistance, which improves safety for road users. Early life chip-loss can occur if there is an insufficient degree of adhesion between the emulsion and aggregate used. The range of additives used in bitumen can have an effect on their adhesion properties. The focus of this research project was to investigate if the use of these additives in surface dressing …

Winter Maintenance On The Irish Road Network, Hugh Mcconnell, Brian Mccann

Civil Engineering Research in Ireland 2020

Winter maintenance relates to those activities undertaken where the objective is to minimise the impact of frost, ice or snow on the travelling public. The responsibility for winter maintenance of all roads in Ireland currently rests with local authorities and Transport Infrastructure Ireland (TII) (Formerly the NRA) on behalf of the Department of Transport, Tourism and Sport (DTTaS), (DTTaS, 2017). The aim of the study was to examine current winter maintenance practices undertaken in Ireland by local authorities and the Motorway Maintenance and Renewals Contracts (MMaRC) contractors and examine the potential financial, operational and environmental benefits if pre-wet and brine …

An Experimental Investigation Of The Optimum Properties And Conditions For Use Of Anionic Emulsions In Road Maintenance Applications, Simonas Ignatavicius, Alan Kavanagh, David Colleran, Michael J. Brennan, Shane Newell

Civil Engineering Research in Ireland 2020

Bitumen emulsions are used for a range of road maintenance applications, including surface dressing, gravel seals, slurry seals, tack coating, cold-mix asphalt and in situ pavement recycling. The emulsions used can be classified as being either cationic (i.e. possessing a positive electrostatic surface charge) or anionic (i.e. carrying a negative electrostatic surface charge). The vast majority of emulsions used for such applications in Europe are cationic, while anionic bitumen emulsions are used widely throughout North America and Africa. The aims of the experimental study described in this paper were (a) to investigate why one or the other emulsion type is …

A Review Of Vision Based Methods For Pothole Detection And Road Profile Analysis, Darragh Lydon, S. E. Taylor, Myra Lydon, Julia Early

Civil Engineering Research in Ireland 2020

This paper is an overview of the development and application of Computer Vision for the detection of pothole, pavement distress and road profile analysis and categorisation. A brief explanation of the traditional methods for determining these factors is given, followed by a chronological description of the evolution and the challenges of using Computer Vision (CV) approaches to determine these conditions. The paper is separated into sections aligned to image capture and analysis methodologies. Qualitative evaluations and comparison of these methods have been provided along with the proposal of guidelines for new computer vision-based road analysis systems.

Analysis And Optimisation Of Tii’S Pams Reset Values And Deterioration Models For Irish Pavement Conditions, James Quinn, Raymond Mcgowan, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ireland has a national road network of approximately 5300km that is managed by Transport Infrastructure Ireland (TII). TII create yearly pavement maintenance and renewal programs from the operation of a Pavement Asset Management System (PAMS). Accurate pavement deterioration models and reset values are an essential part of PAMS and are required for life cycle cost analysis (LCCA). Pavement maintenance and renewal schemes are prioritised based on the LCCA's largest benefit to cost ratio, and therefore optimise the annual pavement maintenance and renewal budget. Currently, TII implement pavement deterioration models and reset values from Austria's and Belgium's PAMS, and are not …

An Analysis Of The Effectiveness Of Bitumen Additives On The Performance Of Pavement Surface Dressings, Alan Anderson, John Casserly, Alan Kavanagh, Jim Campbell

Civil Engineering Research in Ireland 2020

Surface dressing is a maintenance technique that uses thin layers of bitumen emulsion and single sized aggregates. The surface dressing process seals and binds the surface of a road to protect its substructure from water ingress. It also provides increased skid resistance, which improves safety for road users. Early life chip-loss can occur if there is an insufficient degree of adhesion between the emulsion and aggregate used. The range of additives used in bitumen can have an effect on their adhesion properties. The focus of this research project was to investigate if the use of these additives in surface dressing …

Winter Maintenance On The Irish Road Network, Hugh Mcconnell, Brian Mccann

Civil Engineering Research in Ireland 2020

Winter maintenance relates to those activities undertaken where the objective is to minimise the impact of frost, ice or snow on the travelling public. The responsibility for winter maintenance of all roads in Ireland currently rests with local authorities and Transport Infrastructure Ireland (TII) (Formerly the NRA) on behalf of the Department of Transport, Tourism and Sport (DTTaS), (DTTaS, 2017). The aim of the study was to examine current winter maintenance practices undertaken in Ireland by local authorities and the Motorway Maintenance and Renewals Contracts (MMaRC) contractors and examine the potential financial, operational and environmental benefits if pre-wet and brine …

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power

Publications

Civil Engineering Research in Ireland 2020: Conference Proceedings.

Development Of A Multimode Instrument For Remote Measurements Of Unsaturated Soil Properties, Sean Elliott Salazar

Graduate Theses and Dissertations

The hydromechanical behavior of soil is governed by parameters that include the moisture content, soil matric potential, texture, and the mineralogical composition of the soil. Remote characterization of these and other key properties of the soil offers advantages over conventional in situ or laboratory-based measurements: information may be acquired rapidly over large, or inaccessible areas; samples do not need to be collected; and the measurements are non-destructive. A field-deployable, ground-based remote sensor, designated the Soil Observation Laser Absorption Spectrometer (SOLAS), was developed to infer parameters of bare soils and other natural surfaces over intermediate (100 m) and long (1,000 m) …

Case Study: Using Geofoam On A School Project In Encinitas, Ca, Matthew D. Gaebe

Construction Management

This paper is a case study that identifies why Geofoam was used as in-fill material for a construction project located at a high school in Encinitas, CA. The Geofoam was installed under a stairway that connects to a structural retaining wall. The concrete formwork was connected directly to the foam and the stairs were poured in place onsite. The foam acted as the on-grade material, so the concrete stairs did not have to be self-supporting. The purpose of this study is to understand the benefits of using Geofoam, as the in-fill material, as opposed to other traditional materials. An analysis …

Urban Underground Infrastructure Monitoring Iot: The Path Loss Analysis, Abdul Salam, Syed Shah

Faculty Publications

The extra quantities of wastewater entering the pipes can cause backups that result in sanitary sewer overflows. Urban underground infrastructure monitoring is important for controlling the flow of extraneous water into the pipelines. By combining the wireless underground communications and sensor solutions, the urban underground IoT applications such as real time wastewater and storm water overflow monitoring can be developed. In this paper, the path loss analysis of wireless underground communications in urban underground IoT for wastewater monitoring has been presented. It has been shown that the communication range of up to 4 kilometers can be achieved from an underground …

Unl-Cc Outdoor Education Center Master Plan, Marie Wagner

Honors Program: Senior Projects (Public)

The following report contains the work done by the group Griswold Engineering in completion of the Senior Design requirements for Civil Engineering and the Honors Requirements of the Project Manager. As the project manager, my job was to organize the project as a whole and to work alongside the Structural Engineer on the project. One of the main problems to overcome was the division of labor amongst the group. The project was originally conceived as a group project with one project manager and five other students to serve as the project engineers in each subdiscipline. Since this group only had …

Civil Engineering Design Of Cornhusker Council's Outdoor Education Center, Kelly Weiler

Honors Program: Senior Projects (Public)

A team of geotechnical, structural, hydraulic, environmental, and transportation experts collaborated to provide engineering solutions to the Cornhusker Council in an effort to solve the current problems facing their Outdoor Education Center. This results of this project provided the structural design of three bridges on the property, transportation plans for two parking lots and roadway design, geotechnical recommendations for soil testing and erosion prevention, and an environmental and hydraulic analysis of the property. A major challenge in the design of this project is the consideration of the dangers and regulations that accompany the floodway and floodplain regions on site. Various …

Evaluation Of A Centrifuge Consolidation Technique To Determine The Effects Of Temperature And Time On Kaolinite Properties, Esteban Miranda Pinzon

Civil Engineering Undergraduate Honors Theses

Abstract

The effects of time and temperature on the moisture content and unit weight profiles, as developed during a centrifuge consolidation process, were observed during the research program that is described herein. Specifically, a Beckman-Coulter Model J6-MI centrifuge with a six-place JS-4.2A swinging bucket rotor was utilized to consolidate kaolinite slurry samples. The consolidation procedure utilized specially designed slurry consolidometers, made from acrylic tubes with inside diameters of 2.63 inches (6.67 cm) and heights of 5.13 inches (13.04 cm). The tested kaolinite slurry samples were created by mixing 400 grams of dry kaolinite clay powder with 200 grams of de-aired …

Electroósmosis: Un Método Para Mejorar El Suelo, Yenni Mariana Ramírez Mazo, Juan Pablo Osorio, Sergio Agudelo Florez

Articles

El suelo, ese que pisamos, recorremos, sobre el que construimos nuestras casas, escuelas, calles… ese en el que nos dicen que pongamos los pies cuando estamos algo distraídos, es más que simplemente tierra.

Coir Fiber Reinforced Concrete, Jose De La Serna, Moses Karakouzian

AANAPISI Poster Presentations

This poster exhibits the testing and research done on general Portland Cement Concrete with the addition of coir (coconut) fibers as reinforcement. Using the fundamental constituents of cement (water, cement, fine and coarse aggregate) and processed coir fiber, concrete specimens were batched to test for compressive and flexural strengths (per appropriate ASTM standards). Cylindrical and rectangular beam specimens were subjected to loadings until failure occurred. The capacity and modes of failures of the specimens were observed. It was determined that:

• The addition of processed coir fibers decreases the overall strength of general Portland Cement Concrete. • The tested concrete’s …

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

Development Of A Hydraulic Conductivity Placement Window Using Centrifuge Techniques, Greg Thomas

Civil Engineering Undergraduate Honors Theses

A centrifuge soil testing device, currently operated by researchers at the University of Arkansas, was used to develop a technique to determine a hydraulic conductivity placement window. The purpose of this research was to develop a placement window by means of a centrifuge instead of by means of a panel board. Soil specimens were created at standard PRcotor energy and at 50 percent of Standard Proctor energy at -3 percent of optimum, -1.5 percent of optimum, two specimens at optimum, +1.5 percent of optimum, and +3 percent of optimum water content. Values of hydraulic conductivity for the respective specimens were …

Introduction To Infrastructure - The Influence Of Natural Disasters On Infrastructure, Tri Tam Nguyen, Sean M. Raday, Daniel Leverick

STEM Student Research Symposium Posters

In this paper, three major hurricanes in 2017 were examined to determine the damage these hurricanes have done to the infrastructure. Infrastructure has an important role in the nation’s sustained economic development. Infrastructure consists of two main types which are “hard” infrastructure and “soft” infrastructure. Hard infrastructure is the physical networks which include transportation, power, etc. while soft infrastructure is institutions and human capital. Inadequate and inefficient performance of “hard” or “soft” infrastructure would prevent economy from achieving full growth. In the past decades, a significant increase in the number of natural disasters has had great impact on infrastructure systems. …

Hawai'i Wildlife Fund V. County Of Maui, Lowell J. Chandler

Public Land & Resources Law Review

In Hawai’i Wildlife Fund v. County of Maui, the Ninth Circuit held that the plain language of the Clean Water Act provides jurisdiction over indirect discharges of pollutants from a point source into groundwater that is shown to be connected to navigable waters. The court found that studies confirmed pollutants entering the Pacific Ocean were fairly traceable to the County of Maui’s sewage disposal wells. In affirming the district court’s ruling, the Ninth Circuit held that Maui County violated the Clean Water Act by discharging pollutants into a navigable water without the required permit. The court also concluded the …

Spot-R By Triax, Purdue Ect Team

ECT Fact Sheets Archive

Triax’s Spot-r system was developed to tackle the construction industry’s unique safety and productivity challenges, stemming from a demonstrated lack of total jobsite visibility and automatically collected, easily accessible field data. Spot-r by Triax combines a proprietary mesh network with sensor technology to record and transmit previously unattainable workforce and equipment location, activity and safety data within a defined area – all in real-time.

The Spot-r network is installed around the site and operates in a 900 MHz network, with a subset using a cellular connection to forward Spot-r sensor data to Triax’s custom, cloud dashboard. In the hazardous construction …

Purdue’S Biowall, Purdue Ect Team

ECT Fact Sheets Archive

Mechanical ventilation, energy recovery ventilation, and infiltration (air that leaks into a building) are commonly used to introduce fresh air. These are all valid approaches, but a living plant-based filter is an innovative complement to these traditional technologies. A Biowall has the potential to improve indoor air quality while reducing the quantity of air needed for ventilation, creating the potential for energy savings. Figure 1 shows a Biowall prototype being evaluated in the ReNEWW House, a research home located near the Purdue University campus (http://www.renewwhouse.com/).

Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team

ECT Fact Sheets Archive

Caterpillar developed MDP (Machine Drive Power) technology to fill this gap. Rather than an accelerometer and vibratory drum, it uses the principle of rolling resistance to provide indications of soil stiffness. This allows it to perform more reliably on cohesive and granular soils with less variability than accelerometer systems. It also means that the technology can be used on both vibratory and static drum compactors, which are often used on larger sites. While the technology is quite useful on its own, it is even better as a complementary technology to the existing accelerometer-based systems. Contractors who use vibratory soil compactors …