Geotechnical Engineering Commons^™

A Machine-Learning-Based Systematic Framework For Modeling Compression And Recompression Indices For Florida Soils, Michael Morales

Doctoral Dissertations and Master's Theses

This thesis develops a machine-learning framework for estimating the compression index and the recompression index of Florida soils from routinely measured index properties, and reports two studies that build it. Consolidation settlement design requires both indices, and both are obtained from the incremental-loading oedometer test, which occupies a specimen for one to two weeks; the index tests that accompany it are complete within hours. Empirical correlations have filled that interval since the 1950s, but their coefficients are calibrated on specific soil populations and transfer poorly between regions. The first study analyzes 376 consolidation tests compiled for the Florida Department of …

Impact Of Natural Disasters On Construction And Engineering Solutions, Karima Ao Damson

Williams Honors College, Honors Research Projects

This Honors Research Project seeks to research and explain the impact of natural disasters on the construction and reconstruction of infrastructure in countries with the highest risk of natural disasters and compare them to the requirements in the United States in the states most prone to natural disasters. The objectives are to identify the countries most prone to natural disasters, describe the environmental impacts of the natural disasters, describe the impacts on construction and reconstruction requirements, and research whether construction and civil engineering solutions currently applied to the individual countries could be improved or reproduced in other countries exposed to …

Calibrating Airfield Pavement Asset Management For A Changing Global Climate: A Case Study At Fairchild Air Force Base, Emily L. Worthy

Theses and Dissertations

Military airfields and civilian airports serve as foundational nodes in the global transportation network, enabling travel, economic growth, and the projection of national security. This study investigates the relationship between climate variables projected through climate change and pavement degradation, with a focus on Fairchild Air Force Base (AFB). Using principal component regression (PCR), the research integrates historical pavement condition index (PCI) data with climate variables, including snowfall, precipitation, freeze-thaw cycles, solar irradiance, and wind speed to develop a predictive model of pavement performance under future climate scenarios, Representative Concentration Pathway (RCP) 4.5 and RCP 8.5. These models, for both Portland …

Software Literacy In Construction, Aidan Cazares

Williams Honors College, Honors Research Projects

The construction industry increasingly relies on software like Bluebeam Revu for their quantity takeoff, document management, and collaboration needs. This project will outline pertinent information obtained through their Bluebeam professional training program and reflect it with a detailed estimate of a real life construct project.

Time-To-Failure Prediction Of Fine-Grained Soil Slopes Subject To Weather-Driven Deterioration, Arm M. Morsy

Mineta Transportation Institute

Embankments have been widely used in the construction of transportation and flood defense infrastructure. Embankments constructed from clays experience a suite of weather-driven deterioration processes that lead to a progressive loss of hydromechanical performance, causing potentially severe and costly consequences. This study aimed to predict the time to failure of aging, deteriorating clay embankments supporting transportation infrastructure. A multi-phase numerical modeling approach was developed to replicate the long-term, weather-driven, hydromechanical behavior of clay embankments. This model simulated the behavior of a number of well-documented embankment failure case studies that had sufficient data to derive the necessary soil properties and climate …

Effect Of Waste Covid-19 Masks On Compaction Characteristics Of Silty-Clay Soil, Sydney K. Lawson

Honors College Theses

The present study aims to explore the effect of adding shredded waste Covid-19 masks to silty-clay soil on the soil’s compaction characteristics for beneficial use in embankment, the subgrade of roadways, or backfill. This was accomplished by using two different types of masks: blue surgical masks and KN95 masks. Both mask types were hand shredded into half-inch sections using safety-scissors. The maximum dry density (MDD) and optimum moisture content (OMC) are the two most important compaction characteristics, and they were determined by the Standard Proctor Compaction Test (ASTM D698 / AASHTO T99). The change of both the MDD and OMC …

Demystifying Utility Coordination: Understanding The Basics, Josshe I. Palm

Purdue Road School

This session will explain utility coordination to non-utility coordinators. It will help educate others about the role and responsibilities of a utility coordinator, an OSA, easy UC and design mistakes to avoid, scope and design considerations, items commonly overlooked, when to coordinate SUE, and how to work with your UC to request a letting adjustment. We will also highlight UC submittals and allow time for questions about the UC’s role in a project’s success.

Evaluation Of Hydrophobic Materials For Stabilizing Expansive Soils, Suman Shrestha

Civil Engineering Theses - Archive

The swelling and shrinkage of the expansive soil as a response to moisture change is one of the significant challenges posed to infrastructure projects. The significant economic damage that is caused by the expansive soil, as well as its abundance in nature, has prompted various scientists and engineers all around the world to actively search for new and improved methods for stabilizing it. Various traditional methods, such as lime and cement treatment, have been used extensively to stabilize expansive soils and mitigate their harmful effects on the infrastructure. Although these methods are quite often effective and various studies have been …

Floating Offshore Wind Turbine Project, Courtney Huitt, Cormack Williams

Civil and Environmental Engineering

Offshore wind is a developing industry in the Central Coast with the advent of the future offshore wind project planned off the north coast of San Luis Obispo County. This senior design project aligns with the recently leased wind energy project as a detailed study on the structural design, geotechnical design, and construction of a single 14 MW floating offshore wind turbine (FOWT) located 40 km NW of Morro Bay (NOAA buoy 46028). A preliminary design of a spar FOWT is presented in this project as a solution to the rapidly increasing water depth off the coast of Morro Bay, …

Behavior Analysis Of Cement Concrete With Combination Of Waste Rubber And Glass, Abdulaziz Alebra

Symposium of Student Scholars

Glass and Rubber waste materials are valuable materials to use rather than throw which we have more than enough to use and recycle. Recycled glass and rubber materials can reduce and help major climate issues in our times based on the statistics reducing glass can bring down air pollution by 20% and also reduce water pollution by 50% as well as can reduce the use of landfill space. A laboratory study will be launched, and tests will be conducted following the ASTM standards, ASTM C143 for a concrete slump, and ASTM C31 for making and curing concrete specimens. Samples of …

The Living Breakwaters Pdr Efforts Econcrete Resource Analysis, Guianina Ferrari, Shervon Stephens, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy impacted 443,000 people and caused nearly $19 billion (about $58 per person in the US) worth of damage within New York City. As part of the New York City infrastructure reparation plan, the Living Breakwaters project in Tottenville addressed coastal resilience, allocating $100M of public funds to a series of artificial breakwaters by the southwest coast of Staten Island. Each breakwater is constructed and designed to mitigate water flow in storm events. ECOncrete, a primary element of the breakwater, is a specialty cast cementitious product that is marine organism-friendly that encourages biocalcification and photosynthesis. …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Cyclic Behavior Of Laterally Skewed Special Moment Frame Connections: Experimental Testing And System-Level Analyses, Mohammad Hossein Kashefizadeh

Graduate Theses and Dissertations

Special moment frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs. SMFs provide lateral system stiffness without the use of braces that often obstruct views and architectural features. Current American Institute of Steel Construction (ASIC) provisions (AISC 341-16) provide prequalified SMF connection details; however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF beam-to-column connections. The study presented herein involves system-level dynamic time-history analyses of skewed SMF connections, the analytical component-level investigation into the effect of the concrete slab on behavior of the …

Essai Sur Le Terrain Du Mini Pipe Strain Meter Du Jniosh Comme Système D’Alerte De Sécurité Lors Des Travaux En Tranchée, André Lan, Bertrand Galy, Satoshi Tamate, Tomohito Hori, Nabutaka Hiraoka

Rapports de recherche scientifique

Les travaux en tranchée exposent les travailleurs à de nombreux risques. Le risque d'effondrement est le plus important et le plus fréquent lors de tels travaux, mais il est malheureusement très souvent sous-estimé, car même un effondrement mineur ou partiel de moins de 1 m3 de sol peut mortellement blesser un travailleur. L'analyse de 59 rapports de la Commission des normes, de l'équité, de la santé et de la sécurité du travail (CNESST) concernant des accidents graves et mortels survenus lors de travaux d'excavation et en tranchée réalisés entre juin 1973 et mai 2015 montre qu'il y a eu 51 …

Field Test Of The Jniosh Mini Pipe Strain Meter As A Safety Alert System During Trench Work, André Lan, Bertrand Galy, Satoshi Tamate, Tomohito Hori, Nabutaka Hiraoka

Rapports de recherche scientifique

Les travaux en tranchée exposent les travailleurs à de nombreux risques. Le risque d'effondrement est le plus important et le plus fréquent lors de tels travaux, mais il est malheureusement très souvent sous-estimé, car même un effondrement mineur ou partiel de moins de 1 m3 de sol peut mortellement blesser un travailleur. L'analyse de 59 rapports de la Commission des normes, de l'équité, de la santé et de la sécurité du travail (CNESST) concernant des accidents graves et mortels survenus lors de travaux d'excavation et en tranchée réalisés entre juin 1973 et mai 2015 montre qu'il y a eu 51 …

Classification Des Sols Et Sélection Des Systèmes D’Étançonnement Pour L’Excavation Des Tranchées, Bertrand Galy, Denis Lebœuf, Omar Chaallal, André Lan

Rapports de recherche scientifique

Les travaux de fouilles en tranchée exposent les travailleurs à de nombreux risques. L’éboulement est le risque le plus grave et le plus fréquent présent pendant ces travaux, mais hélas, il est très souvent sous-estimé, alors qu’un éboulement mineur de moins d’un mètre cube de terre peut blesser mortellement un travailleur. Une analyse de 50 rapports d’accidents graves et mortels de la Commission des normes, de l’équité, de la santé et de la sécurité du travail (CNESST), survenus entre mai 1974 et juin 2017 lors de travaux d’excavation et de fouilles en tranchées, montre qu’il y a eu 48 décès …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

Applications Of Masw And Mhvsr Techniques For Infrastructure Evaluation With A Focus On The Effects Of Different Transformation Techniques And Near-Field Effects On Derived Dispersion Data, Salman Rahimi

Graduate Theses and Dissertations

This dissertation is aimed at understanding two aspects of active surface wave methods to improve the accuracy and reliability of this method. These include (1) the performance of four common wavefield transformation methods for the multichannel analysis of surface wave (MASW) data processing and (2) near-field effects. Toward this end, extensive field measurements were conducted considering different factors affecting these two topics. The MASW and microtremor horizontal to vertical spectral ratio (MHVSR) were then employed to examine their efficiency for infrastructure health monitoring.

Regarding the performance of the four common transformation techniques, it was observed that for sites with a …

Study Of Fragility Functions For Assessing Damage To Water Pipe Networks Caused By Earthquake Loading, Dylan Joseph Merlo

Master's Theses

The performance of water lifelines during seismic events is an area of ongoing research. In this study we evaluate eight (8) different seismic events and the impact that ground shaking and ground deformations had on water pipeline systems. The overall goal of this work is to provide municipalities and utility providers with tools for mitigating the consequences of seismic hazards on water lifeline systems by analyzing the accuracy of damage estimation models. Three (3) different repair rate models are evaluated using data collected from the seismic events and compared to observed repair rate data. Results are analyzed to examine the …

Classification Des Sols Et Sélection Des Systèmes D’Étançonnement Pour L’Excavation Des Tranchées : Résultats Des Essais Réalisés Au Laboratoire De Géotechnique De L’Université Laval – Annexe, Bertrand Galy, Denis Lebœuf, Omar Chaallal, André Lan

Rapports de recherche scientifique

Dans le cadre du projet « Classification des sols et sélection des systèmes d’étançonnement pour l’excavation des tranchées », des tranchées et des excavations de pleine grandeur ont été réalisées dans une argile sensible typique du Québec, à Louiseville. Ces aménagements ont permis d’évaluer et de valider la résistance et le comportement de systèmes d’étançonnement, grâce aux essais suivants :

• Une excavation non soutenue de 5 m de profondeur à paroi verticale;
• Une excavation non soutenue de 4,2 m de profondeur, à paroi talutée (pente de 1,6:1);
• Une tranchée de 6 m de profondeur soutenue avec une boîte de tranchée …

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola

Civil Engineering Theses

The surface deflection bowl data collected through Non-Destructive Testing (NDT) has been widely utilized by various Department of Transportation (DOTs) in the South-Central States and other places. The primary purpose of using deflection-based NDTs in network-level assessment is to identify a weak pavement section that requires further analysis at the project level. The falling weight deflectometer (FWD) test is one of the common NDT based tests utilized by highway agencies in assessing the performance of the flexible pavement. However, a robust method to evaluate pavement sections utilizing FWD data from all the sensors are seldom developed. There is always a …

Cement Stabilized Crushed Stone Base Course Strength And Stiffness Analysis, Andrew Deschenes

Graduate Theses and Dissertations

Approximately 70 – 80% of state departments of transportations (DOTs) utilize the 1993 AASTHO Guide for Design of Pavement Structures (1993 AASHTO) [1] for structural design of pavements. A growing portion of DOT’s are beginning to implement the Mechanistic-Empirical Pavement Design Guide (MEPDG), referred to as AASHTOWare Pavement ME [2]. The 1993 AASHTO flexible guide applies empirically derived unitless strength values referred to as structural layer coefficients and structural numbers (SN) to pavement thickness and pavement types. The 1993 AASHTO rigid flexible guide utilizes the depth and strength of the concrete pavement, with the composite spring constant (kc), which is …

Hybrid Passive Control System For Seismic Response Mitigation Of Steel Frame Structures, Mohammad Hossein Mehrabi

Student Works (2020-2029)

Large vibration forces such as from seismic excitations can cause structural damage and structural collapse in the case of intense earthquakes. A large number of novel methods and of these techniques has weaknesses and strengths. Several control devices demonstrate a two-step mechanism in which the structure's stiffness is initially raised, and then the of the first vibration period down to a region where the structural response is significantly increased. The main aim of this thesis is to propose a hybrid passive control system comprises of two phases for the seismic retrofit of moment-resisting steel frames. The first phase is a …

St. Mary And St. Anne Cathedral, Cork: An Optimum Heating Solution For Heritage Buildings?, Christopher Shiell, Roger P. West

Civil Engineering Research in Ireland 2020

Cathedrals and most churches are characterised by having large internal, undivided spaces and permeable building envelopes. They are often used little, intermittently, but predictably and, in spite of the fact that they are unique in still being largely used for the purpose for which they were built many centuries ago, they are now often used for additional purposes, for which they were never designed. These uses include concerts, graduation ceremonies, filming and a host of other uses all of which require a level of thermal comfort not envisaged by the original builders. Research was undertaken by the authors into the …

Challenges And Opportunities To Deep Retrofitting Of Traditional Fabric Buildings To Achieve Nearly Zero Energy Building (Nzeb), Maria Lopez Zambrano, Paul Kenny, Jamie Goggins

Civil Engineering Research in Ireland 2020

Many of our traditional buildings are disappearing or in danger of being under utilised because they are not comfortable for modern day living and do not meet our present day needs. If a building does not have a use, inevitably it deteriorates and eventually becomes a ruin or gets demolished. It is important to retrofit these buildings, which are part of our identity and can be powerful tourist attractions even though most of them are not listed. Some owners want to apply for retrofitting schemes and grants, but they are rejected because there are no standard solutions to achieve low …

Can Deap Help Us To Predict The Energy Demand And Indoor Temperature Of Homes Before And After Renovation? A Case Study From Dublin, Paul Moran, Jamie Goggins

Civil Engineering Research in Ireland 2020

Improving the energy efficiency of buildings via retrofitting is seen as one of the key mitigation measures to reducing the energy demand and carbon emissions of the built environment in Ireland. However, while energy efficiency retrofits for buildings are effective in theory, the energy savings estimated by statistical or engineering models can often be inaccurate. The Domestic Energy Assessment Procedure (DEAP) is the standard assessment procedure used for assessing the energy performance standard of residential buildings in Ireland. This paper examines the gas energy demand for space and water heating and the internal temperature profiles in contrast to DEAP estimates …

Operational And Embodied Energy Analysis Of 8 Single-Occupant Dwellings Retrofit To Nzeb Standard, Richard O'Hegarty, Shane Colclough, Oliver Kinnane, Donal Lennon, Etienne Rieux

Civil Engineering Research in Ireland 2020

In line with the Energy Performance of Buildings Directive, Irish dwellings are being retrofit to near Zero Energy Building (nZEB) standards - with a number of the deep energy retrofits classified as A-rated. As a result of the low operational energy, the embodied energy share of an nZEB's life cycle energy is significantly increased. Therefore, to obtain a holistic picture of the change in energy profile of buildings, the embodied energy of the material added to achieve that low performance should also be taken into account. This paper presents results from a case study of 8 single-occupant terrace bungalows retrofit …

The Broader Development Of The Student Engineer Through Industry Based Experiential Learning, Donogh Coleman, Ted Mckenna, Mary Moloney

Civil Engineering Research in Ireland 2020

The global drive for industry-aware and industry-ready engineering graduates, has led to the development and integration of experiential learning through work placements. Industry is looking to recruit graduates with not just the requisite technical engineering skills, but also graduates with inter alia high levels of teamwork and communications skills. This has been recognised by CIT with the integration of work placement in most of its undergraduate programmes. This paper provides an overview of the student placement process in the Department of Civil, Structural and Environmental Engineering at CIT, includes the work placement alternative which was implemented due to the COVID-19 …

Art In Engineering: Evoking A Creative Response From Engineering Students And More, Jamie Goggins, Marta Fuente, Eamonn Madden

Civil Engineering Research in Ireland 2020

The concept of creativity being only associated with writers, painters, and artistic professions is outdated. The future engineer must embrace maths, art and creativity to unlock innovative solutions. Traditional engineering courses with an emphasis predominately on maths and science can produce graduates who are constrained in developing design solutions without creativity to unlock innovative solutions. This paper describes a short course introduced in the School of Engineering at NUIGalway in 2018 to expose students to creative thinking research and principles and engage in various forms of creative expression (photography, painting and essay writing) to articulate their response to a set …