Open Access. Powered by Scholars. Published by Universities.®

Environmental Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

2018

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 1 - 30 of 310

Full-Text Articles in Environmental Engineering

Methods To Improve The Remediation Of Polycyclic Aromatic Hydrocarbons (Pahs) In Aerobic And Anaerobic Environments, Brian Wartell Dec 2018

Methods To Improve The Remediation Of Polycyclic Aromatic Hydrocarbons (Pahs) In Aerobic And Anaerobic Environments, Brian Wartell

Dissertations

Oil spills occur regularly in terrestrial environments and crude oil can contain many compounds that are highly resistant to degradation. Among these compounds are high levels of polycyclic aromatic hydrocarbons (PAHs) which are not only toxic but can also be carcinogenic and/or mutagenic. The first chapter of this dissertation includes an extensive review chapter on the variables affecting the anaerobic degradation of hydrocarbons, with a particular focus on PAHs. Electron acceptors, electron donors, temperature, salinity, pH all play key roles in determining the possibility effective of effective degradation occurring. Thus, by addressing solutions, such as biostimulation, improving environmental variables for …


Experimental And Numerical Characterization Of Multiphase Subsurface Oil Release, Feng Gao Dec 2018

Experimental And Numerical Characterization Of Multiphase Subsurface Oil Release, Feng Gao

Dissertations

Subsurface oil release is commonly encountered in the natural environment and engineering applications and has received the substantial attention of researchers after the disastrous Deepwater Horizon Blowout oil spill in 2009. The main focus on the present research is to systematically study the hydrodynamics of underwater oil jet under a variety of conditions, including the effect of dispersant and different gas to oil ratios (GOR) by using experimental measurement as well as a Computational Fluid Dynamics (CFD) approach, from which the measured turbulent characteristics (e.g., velocity, turbulent kinetic energy, turbulence dissipation rate, etc.) of underwater oil jet are thoroughly examined …


2018 Fall Engr333 Project Final Report (Section A), 2018 Fall Engr333 Section A Dec 2018

2018 Fall Engr333 Project Final Report (Section A), 2018 Fall Engr333 Section A

ENGR 333

Calvin College currently spends 2.35 million dollars on energy every year. Physical Plant is under pressure to reduce the amount of energy that Calvin purchases from the electrical grid since the college is facing many budget constraints. In addition, President Le Roy signed the President’s Carbon Commitment to achieve carbon neutrality by 2057. With this need to save money on energy and reduce the college’s carbon footprint, the objective of this project was to determine the largest possible reduction in Calvin’s annual energy costs given a five-million-dollar investment in renewable energy.


2018 Fall Engr333 Project Final Report (Section B), Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten Dec 2018

2018 Fall Engr333 Project Final Report (Section B), Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten

ENGR 333

What is the largest possible reduction in Calvin College’s annual energy costs from a $5M initial investment in renewable energy? Renewable energy systems are essential for Calvin College to reduce greenhouse gas emissions and achieve carbon neutrality to meet the Carbon Commitment that President Le Roy signed in December 2017. Also, a significant cost reduction could be a positive result of transitioning to renewable energy sources such as geothermal, wind, solar, and biomass. Four renewable energy sources were studied throughout the semester to determine a feasible renewable energy plan for Calvin with a $5M investment.


Mechanisms Of Calcium Phosphate Mineralization On Biological Interfaces And Their Engineering Applications, Doyoon Kim Dec 2018

Mechanisms Of Calcium Phosphate Mineralization On Biological Interfaces And Their Engineering Applications, Doyoon Kim

McKelvey School of Engineering Graduate Student Theses & Dissertations

All living organisms utilize phosphorus (P) as an essential component of their cell membranes, DNA and RNA, and adenosine triphosphate. Bones, in addition to bearing loads, play an important role in balancing P levels in our bodies. In bones, a network of collagen templates and calcium phosphate (CaP) nanocrystals builds hierarchical levels, from nano- to macroscale. Within this architecture, the thermodynamic properties of CaP minerals are influential. Despite the importance of nucleation, growth, and crystallization in collagen structures for tissue development, little kinetic study of these processes has been conducted due to the limited in situ techniques for monitoring these …


Spatial Exploration Of Trace Metals In Near-Surface Water And Soil In The Bolivian Altiplano, Lizzie Wilson Dec 2018

Spatial Exploration Of Trace Metals In Near-Surface Water And Soil In The Bolivian Altiplano, Lizzie Wilson

Civil and Environmental Engineering Theses and Dissertations

We analyzed soil and groundwater samples from the Bolivian Altiplano for trace metal concentrations, correlations and partitioning trends. Total digestion, sequential extraction and loss on ignition experiments were performed on soil samples. We ran aqueous samples on an ICP-MS. Results were analyzed to identify trace metal concentrations and find any significant correlations. We generated interpolated maps in ArcGIS to spatially analyze results. Results for elevated concentrations of interest were divided into sub-groups of organophilic metals, oxoanions and divalent metals and include vanadium, arsenic, selenium, zinc, nickel, lead, cobalt, uranium, copper and manganese. These elements are likely naturally sourced. We found …


Epics Gaqt: Nandi Clean Kitchen Study, Yichen Fan Dec 2018

Epics Gaqt: Nandi Clean Kitchen Study, Yichen Fan

Engagement & Service-Learning Summit

No abstract provided.


2018 Fall Engr333 Poster, Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten, 2018 Fall Engr333 Section A Dec 2018

2018 Fall Engr333 Poster, Alexander Cooper, Katie Diekema, Grace Fasipe, Daniella Sugijanto, Alec Dejonge, Timothy Dykhuis, Breanna Kooiman, Samuel Olson, Brennan Boice, Tyler Gustman, Daniel Norton, Christopher Vanwhye, Robert Capozzoli, Jared Minderhoud, Clark Richeson, Nathan Schuyten, 2018 Fall Engr333 Section A

ENGR 333

  • $158k initial investment in Geothermal systems for various Calvin-owned residential buildings
  • $3.34M initial investment in solar panels for Calvin’s rooftops
  • The overall savings would be $233,850 per year
  • Emissions would be reduced by 864 tons of CO2 emissions per year
  • The recommended investment would be fully paid back in 11-15 years


College Of Engineering Senior Design Competition Fall 2018, University Of Nevada, Las Vegas Dec 2018

College Of Engineering Senior Design Competition Fall 2018, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …


2018 Fall Engr333 Seminar Presentation, Rachel Evans, Alex Gross, Daniella Sugijanto, Jake Shaarda Dec 2018

2018 Fall Engr333 Seminar Presentation, Rachel Evans, Alex Gross, Daniella Sugijanto, Jake Shaarda

ENGR 333

File for student presentation, given by students in the Fall 2018 class of ENGR333.


Community-Scale Water Treatment Systems In The Dominican Republic, Jonathan Racey, Annabelle Papai, Elise Fischer, Becca Johnson Dec 2018

Community-Scale Water Treatment Systems In The Dominican Republic, Jonathan Racey, Annabelle Papai, Elise Fischer, Becca Johnson

Engagement & Service-Learning Summit

Engagement and Service-Learning Summit: Reciprocal and Sustainable Partnerships


Attributing Accelerated Increases In Salinity In The Mediterranean Coastal Zone To Climate Change And Seawater Desalination Brine And The Resultant Unsustainability Of Modern Desalination Technology, Brandon W. Harper Dec 2018

Attributing Accelerated Increases In Salinity In The Mediterranean Coastal Zone To Climate Change And Seawater Desalination Brine And The Resultant Unsustainability Of Modern Desalination Technology, Brandon W. Harper

HCNSO Student Capstones

Anthropogenic climate change influences our oceans on a global scale and has brought about increased salinity levels in large areas of our oceans such as the North Atlantic (Dunbar 2009). Concentrations of large scale desalination plants around small bodies of water add to this pattern and have shown even larger increases in salinity due to desalination brine discharge (Purnama et al., 2005). Salinity profile data over time should show similar increases in salinity in the Mediterranean Sea due to climate change and localized data should show increased salinity due to brine discharge. This study aims to pinpoint the extent of …


Novel Materials Can Radically Improve Whole-System Environmental Impacts Of Additive Manufacturing, Jeremy Faludi, Cory M. Van Sice, Yuan Shi, Justin Bower, Owen M.K Brooks Dec 2018

Novel Materials Can Radically Improve Whole-System Environmental Impacts Of Additive Manufacturing, Jeremy Faludi, Cory M. Van Sice, Yuan Shi, Justin Bower, Owen M.K Brooks

Dartmouth Scholarship

Additive manufacturing often has higher environmental impacts per part than traditional manufacturing at scale, but new materials can enable more sustainable 3D printing. This study developed and tested novel materials for paste extrusion printing, and tested materials invented by others. Testing compared their whole-system environmental impacts to standard ABS extrusion, measured by life cycle assessment (LCA); testing also assessed material strength, printability, and cost. Materials were chosen for low print energy (chemical bonding, not melting), low toxicity, and circular life cycle (biodegradable, ideally sourced from waste biomaterial). Printing energy was reduced 75% (from 160 to 40 Wh/part), and embodied impacts …


Evaluation Of A Centrifuge Consolidation Technique To Determine The Effects Of Temperature And Time On Kaolinite Properties, Esteban Miranda Pinzon Dec 2018

Evaluation Of A Centrifuge Consolidation Technique To Determine The Effects Of Temperature And Time On Kaolinite Properties, Esteban Miranda Pinzon

Civil Engineering Undergraduate Honors Theses

Abstract

The effects of time and temperature on the moisture content and unit weight profiles, as developed during a centrifuge consolidation process, were observed during the research program that is described herein. Specifically, a Beckman-Coulter Model J6-MI centrifuge with a six-place JS-4.2A swinging bucket rotor was utilized to consolidate kaolinite slurry samples. The consolidation procedure utilized specially designed slurry consolidometers, made from acrylic tubes with inside diameters of 2.63 inches (6.67 cm) and heights of 5.13 inches (13.04 cm). The tested kaolinite slurry samples were created by mixing 400 grams of dry kaolinite clay powder with 200 grams of de-aired …


Marine Boundary Layer Aerosol In The Eastern North Atlantic: Seasonal Variations And Key Controlling Processes, Guangjie Zheng, Yang Wang, For Full List Of Authors, See Publisher's Website. Dec 2018

Marine Boundary Layer Aerosol In The Eastern North Atlantic: Seasonal Variations And Key Controlling Processes, Guangjie Zheng, Yang Wang, For Full List Of Authors, See Publisher's Website.

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The response of marine low cloud systems to changes in aerosol concentration represents one of the largest uncertainties in climate simulations. Major contributions to this uncertainty are derived from poor understanding of aerosol under natural conditions and the perturbation by anthropogenic emissions. The eastern North Atlantic (ENA) is a region of persistent but diverse marine boundary layer (MBL) clouds, whose albedo and precipitation are highly susceptible to perturbations in aerosol properties. In this study, we examine MBL aerosol properties, trace gas mixing ratios, and meteorological parameters measured at the Atmospheric Radiation Measurement Climate Research Facility's ENA site on Graciosa Island, …


Accumulation Of Lead By Biofilms In Drinking Water Distribution Systems, Kaleb Oren Belcher Dec 2018

Accumulation Of Lead By Biofilms In Drinking Water Distribution Systems, Kaleb Oren Belcher

Graduate Theses and Dissertations

Recent crises, such as the one in Flint, MI, indicate that lead exposure from drinking water is a major health concern in the United States. Over six million lead service lines are still in use in the United States, and a universal protocol to safely remove these lead service lines from drinking water distribution systems has not yet been established. This paper calls to attention the potential hazard that biofilms pose as a source of lead in distribution systems, even after the removal of lead pipes. This study used a simulated water distribution system containing a lead source pipe and …


Towards Environmentally Sustainable And Cost-Effective Food Distribution In The U.S., Jasmina Burek Dec 2018

Towards Environmentally Sustainable And Cost-Effective Food Distribution In The U.S., Jasmina Burek

Graduate Theses and Dissertations

Distribution centers (DCs) and supermarkets have an important role in food sustainability, but no previous research has accounted for their environmental impact. The purpose of this research was to assess environmental sustainability of grocery, perishables, and general merchandise DCs; to estimate food storing and retailing impact; and to provide cost-effective strategies to reduce DCs’ environmental impacts. The importance and relevance of the research is threefold: improving sustainability of DCs, food storing, and food retailing. The main method used in this research was the life cycle assessment (LCA) method. An initial study calculated environmental impacts of the Wal-Mart Stores, Inc. DCs, …


Assessing Biofiltration Without Ozonation For Removal Of Trihalomethane Precursors In Drinking Water At The Beaver Water District Drinking Water Treatment Plant, Sana Ajaz Dec 2018

Assessing Biofiltration Without Ozonation For Removal Of Trihalomethane Precursors In Drinking Water At The Beaver Water District Drinking Water Treatment Plant, Sana Ajaz

Graduate Theses and Dissertations

Biofiltration without pre-ozonation has the capability to remove natural organic matter (NOM) fractions that serve as precursors of disinfection byproducts (DBPs), which include the four regulated trihalomethanes (THMs) and dichloroacetonitrile (DCAN). Rapid small-scale column tests (RSSCTs) and Pilot Plant filters operated at empty-bed contact times (EBCTs) of 4, 8, and 16 minutes were used to evaluate the performance of nutrient-amended (free ammonia and phosphorus) biofiltration for THM and DCAN precursor removal, as measured using formation potential (FP) tests. NOM surrogates – which include dissolved organic carbon (DOC), specific ultraviolet absorbance (SUVA254) and fluorescence-PARAFAC components – were measured weekly throughout the …


Comparative Analysis Of Mosquito Trap Counts In The Peruvian Amazon: Effect Of Trap Type And Other Covariates On Counts And Diversity, George W. Peck, Fanny Castro-Llanos, Victor Lopez-Sifuentes, Erica Lindroth Dec 2018

Comparative Analysis Of Mosquito Trap Counts In The Peruvian Amazon: Effect Of Trap Type And Other Covariates On Counts And Diversity, George W. Peck, Fanny Castro-Llanos, Victor Lopez-Sifuentes, Erica Lindroth

Civil and Environmental Engineering Faculty Publications and Presentations

Efficient detection of multiple species of adult mosquitoes in various habitats using effective traps is a crucial 1st step in any disease prevention program. Novel trap types that target tropical vectors of human diseases require field testing in the habitat of the vector–disease system in question. This paper analyzes a series of mosquito trapping studies conducted at Mapacocha, San Juan Bautista District, Loreto, Peru, during August–September 2013 and April–May 2014. Six trap configurations were evaluated in forest and rural locations. Adult mosquito counts were analyzed using full Bayesian inference of multilevel generalized linear models and posterior probability point estimates of …


Midpoint And Endpoint Sustainability Assessment Of U.S. And China Manufacturing: A Comparative Mrio+Recipe Analysis, Mustafa Saber Dec 2018

Midpoint And Endpoint Sustainability Assessment Of U.S. And China Manufacturing: A Comparative Mrio+Recipe Analysis, Mustafa Saber

Master's Theses

Manufacturing is among the most important industries for an economy, which creates value-added, fosters innovation, stimulates employment and economic growth. Therefore, manufacturing industries are crucial for a country’s sustainable development not only for economic reasons but also for social (.e.g. employment, tax, etc.) and environmental ones. Thus, manufacturing activities’ contribution to the economy is critically related with environmental and social impacts. Sustainable economic growth is essential and necessary for a country to provide all necessary goods and services to its growing population.

And, this is highly linke with the creation of new jobs and in this context, manufacturing jobs have …


Enabling Robust Distributed Real-Time Hybrid Simulation Method And Expanding Its Applications In Floating Wind Turbine Systems, Mehmet Cinar Dec 2018

Enabling Robust Distributed Real-Time Hybrid Simulation Method And Expanding Its Applications In Floating Wind Turbine Systems, Mehmet Cinar

Masters Theses

Real-time hybrid simulation (RTHS), which integrates physical experiment and numerical simulation, plays an essential role in understanding the time-dependent behavior of structures when subject to hazardous loadings. On the other hand, RTHS might not yield accurate results for complex structural systems due to experimental and computational limitations. Distributed real-time hybrid simulation (dRTHS), which takes the advantage of distributed laboratory facilities using network communications, was proposed and proven to address some limitations in RTHS. During dRTHS, Internet delay due to the network communication is added to the actuator delay in RTHS, which may cause inaccurate results or even unstable tests. To …


Global Renewable And Nonrenewable Energy Use Impact Assessment Of U.S. Manufacturing: An Integrated Cradle-To-Gate Lca And Dea Approach, Bahadir Ezici Dec 2018

Global Renewable And Nonrenewable Energy Use Impact Assessment Of U.S. Manufacturing: An Integrated Cradle-To-Gate Lca And Dea Approach, Bahadir Ezici

Master's Theses

In this thesis, U.S. manufacturing industries` global supply chain-linked energy use and economic output are investigated considering a total of 16 renewable and nonrenewable energy carriers. A multiregion input output (MRIO) framework is employed to conduct the global supply chain-linked energy use impact assessment. The study period was between 1995 and 2014 based on data availability. Thus, 20 MRIO models were developed. Each MRIO model consists of the 40 largest economies of the world and the rest of the world (ROW) as the 41st country. Each country’s economy was structured into 35 manufacturing and service industries based on the Worth …


Increasing Algal Productivity And Treatment Potential In Raceways Fed Clarified Municipal Wastewater, Christopher D. Pittner Dec 2018

Increasing Algal Productivity And Treatment Potential In Raceways Fed Clarified Municipal Wastewater, Christopher D. Pittner

Master's Theses

Two sets of triplicate pilot algal raceway ponds (1000-L, 0.30-m deep, paddle wheel mixed) were operated for 14 months at a California wastewater treatment plant to treat wastewater and generate algal-bacterial biomass as biofuel feedstock. Two experiments were run to determine the effect on biomass productivity of (1) hydraulic residence time (HRT: 2, 3, 4, or 4.5 days) and (2) feeding schedule (18 small pulses during 8 AM-4 PM [diurnal] versus 20 large pulses during 4 AM-12 AM [diel]). The target productivity was at least 20 g volatile suspended solids per m2 of pond per day. Additional output variables were …


Application Of Winslamm To Evaluate The Effect Of Green Infrastructure Implementation In Northern Utah, Rosa A. Fernández Velásquez Dec 2018

Application Of Winslamm To Evaluate The Effect Of Green Infrastructure Implementation In Northern Utah, Rosa A. Fernández Velásquez

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study provides an evaluation of the performance of the WinSLAMM model in two cities of northern Utah, a region in which it has not been validated to date. Runoff volumes for a series of events from 2015 to 2017 were calculated for six study areas. These results were compared to model outputs to evaluate the prediction accuracy. The model performed poorly when default parameters where used, as expected. Thus, the calibration of runoff coefficient was done with local data. Total suspended solids (TSS), total phosphorus (TP) and total dissolved phosphorus (TDP) were also evaluated and calibrations were developed. The …


Cost Performance Index Stability: Insights From Environmental Remediation Projects, Denis S. Clayson, Edward D. White, Alfred E. Thal Jr. Nov 2018

Cost Performance Index Stability: Insights From Environmental Remediation Projects, Denis S. Clayson, Edward D. White, Alfred E. Thal Jr.

Faculty Publications

The purpose of this study was to investigate the stability of the cost performance index (CPI) for environmental remediation projects as the topic is not addressed in the literature. CPI is defined as the earned value of work performed divided by the actual cost of the work, and CPI stability represents the point in time in a project after which the CPI varies by less than 20 percent (measured in different ways).


Electroósmosis: Un Método Para Mejorar El Suelo, Yenni Mariana Ramírez Mazo, Juan Pablo Osorio, Sergio Agudelo Florez Nov 2018

Electroósmosis: Un Método Para Mejorar El Suelo, Yenni Mariana Ramírez Mazo, Juan Pablo Osorio, Sergio Agudelo Florez

Articles

El suelo, ese que pisamos, recorremos, sobre el que construimos nuestras casas, escuelas, calles… ese en el que nos dicen que pongamos los pies cuando estamos algo distraídos, es más que simplemente tierra.


Pursuing Resilience Of Coastal Communities Through Sustainable And Integrated Urban Water Management, Pacia Díaz Nov 2018

Pursuing Resilience Of Coastal Communities Through Sustainable And Integrated Urban Water Management, Pacia Díaz

USF Tampa Graduate Theses and Dissertations

Reliability of water supply in the urban setting has become essential for communities to function and thrive. It is needed for more than mere human consumption and well-being. Although modern cities have water treatment and distribution systems, pressures from urbanization, population growth and the anticipated pressures of climate change are affecting the quality of water supply and the reliability of treatment and distribution systems. There is therefore an urgent need to take appropriate measures to improve the resilience of water supply systems before the impacts are irreversible.

Improving the resilience of water supply systems can be a challenge. In the …


Trend Analysis Of Las Vegas Land Cover And Temperature Using Remote Sensing, Haroon Stephen Nov 2018

Trend Analysis Of Las Vegas Land Cover And Temperature Using Remote Sensing, Haroon Stephen

Civil and Environmental Engineering and Construction Faculty Research

The Las Vegas urban area expanded rapidly during the last two decades. In order to understand the impacts on the environment, it is imperative that the rate and type of urban expansion is determined. Remote sensing is an efficient and effective way to study spatial change in urban areas and Spectral Mixture Analysis (SMA) is a valuable technique to retrieve subpixel landcover information from remote sensing images. In this research, urban growth trends in Las Vegas are studied over the 1990 to 2010 period using images from Landsat 5 Thematic Mapper (TM) and National Agricultural Imagery Program (NAIP). The SMA …


Wastewater In Context: Systems-Based Approaches To Improving Wastewater Infrastructure Transitions, Christine Prouty Nov 2018

Wastewater In Context: Systems-Based Approaches To Improving Wastewater Infrastructure Transitions, Christine Prouty

USF Tampa Graduate Theses and Dissertations

Coastal communities and ecosystems around the world are some of those most vulnerable to the impacts of climate change. In particular, the wastewater treatment systems in these areas are on the forefront of the effects of increasing frequency, duration, and intensity associated with extreme weather events. As such, decision making about adopting new wastewater technologies or transitioning to an improved treatment portfolio is an important area of research for coastal communities because they are critically linked to the health of the nearby aquatic ecosystems (i.e. tourism, fishing, cultural heritage, climate protection).

The decision making process about technology adoption and transitions …


Investigation Of Acetaminophen And Caffeine Removal Using Manganese Oxides And Granular Activated Carbon In Column Experiments, Rachael E. Miera Nov 2018

Investigation Of Acetaminophen And Caffeine Removal Using Manganese Oxides And Granular Activated Carbon In Column Experiments, Rachael E. Miera

Civil Engineering ETDs

This study was conducted to investigate the application of manganese dioxide (MnOx(s)) and granular activated carbon (GAC) media for the removal of the acetaminophen and caffeine. Treatment of emerging micropollutants has become a concern due to their effects on environmental health. Manganese oxides can be a viable alternative for water treatment due to their abundance in the environment. Laboratory scale flow through column experiments were performed using different combinations of commercial MnOx(s) and GAC to assess the removal of caffeine and acetaminophen, and the release of Mn due to the reductive dissolution of MnOx(s). Results …