Environmental Engineering Commons^™

Modeling The Effects Of Distribution System Topology On Water Quality, Chun-Ying Chao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Inadequate treatment of drinking water causes the formation of disinfection by-products and the regrowth of harmful microbial species. Various studies have addressed the problem of water quality monitoring, but very few have employed topological analysis, a valuable mathematical tool widely applied in biological, business, and social research. This thesis examines the relationship between the topological properties of water distribution systems and water-quality models. In particular, the research proposes a novel framework for mapping network topological attributes to water-quality models. This research adopts topological metrics to assess the accuracy of the predictions of chlorine concentrations in dead ends. It examines four …

Role Of Submicrometer Particles In Advanced Technologies Of Carbon Capture, Zhichao Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

Oxy-combustion and post-combustion carbon capture technologies are two of the most promising strategies for carbon capture and storage (CCS), which is a commonly accepted approach to address the challenge of climate change. Pressurized oxy-combustion has been actively studied due to its great potential to enhance the power plant energy efficiency by recovering latent heat from water vapor condensation without incurring additional gas compression cost. On the other hand, amine-based CO2 scrubbers have been demonstrated to have high removal efficiency of CO2 with the possibility to recycle amine solutions, which makes the technology a promising candidate for post-combustion carbon capture. Nonetheless, …

Role Of Submicrometer Particles In Advanced Technologies Of Carbon Capture, Zhichao Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

Oxy-combustion and post-combustion carbon capture technologies are two of the most promising strategies for carbon capture and storage (CCS), which is a commonly accepted approach to address the challenge of climate change. Pressurized oxy-combustion has been actively studied due to its great potential to enhance the power plant energy efficiency by recovering latent heat from water vapor condensation without incurring additional gas compression cost. On the other hand, amine-based CO2 scrubbers have been demonstrated to have high removal efficiency of CO2 with the possibility to recycle amine solutions, which makes the technology a promising candidate for post-combustion carbon capture. Nonetheless, …

Recent Advances In Low-Cost Particulate Matter Sensor: Calibration And Application, Jiayu Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

Particulate matter (PM) has been monitored routinely due to its negative effects on human health and atmospheric visibility. Standard gravimetric measurements and current commercial instruments for field measurements are still expensive and laborious. The high cost of conventional instruments typically limits the number of monitoring sites, which in turn undermines the accuracy of real-time mapping of sources and hotspots of air pollutants with insufficient spatial resolution. The new trends of PM concentration measurement are personalized portable devices for individual customers and networking of large quantity sensors to meet the demand of Big Data. Therefore, low-cost PM sensors have been studied …

Mechanisms Of Calcium Phosphate Mineralization On Biological Interfaces And Their Engineering Applications, Doyoon Kim

McKelvey School of Engineering Graduate Student Theses & Dissertations

All living organisms utilize phosphorus (P) as an essential component of their cell membranes, DNA and RNA, and adenosine triphosphate. Bones, in addition to bearing loads, play an important role in balancing P levels in our bodies. In bones, a network of collagen templates and calcium phosphate (CaP) nanocrystals builds hierarchical levels, from nano- to macroscale. Within this architecture, the thermodynamic properties of CaP minerals are influential. Despite the importance of nucleation, growth, and crystallization in collagen structures for tissue development, little kinetic study of these processes has been conducted due to the limited in situ techniques for monitoring these …

Synthesis Of Crumpled Graphene And Titanium Dioxide Based–Nanomaterials And The Application To Carbon Dioxide Photoreduction, Yao Nie

McKelvey School of Engineering Graduate Student Theses & Dissertations

With the rapid development of the economy, increasing combustion of fossils fuels has caused an increase in the atmospheric carbon dioxide (CO2) level, and has led to global climate change. As a mitigation approach, CO2 capture and conversion (CCC) can not only capture CO2, but also convert it to useable products, such as hydrocarbon fuels. Photocatalytic reduction is an attractive CCC option that directly harnesses inexpensive and abundant solar energy. Titanium dioxide (TiO2) is a widely used semiconductor for photocatalysis, and graphene nanosheets are a promising material for use in fabricating graphene-TiO2 hybridized photocatalysts. To realize the application of these …

Developing Multi-Scale Models For Water Quality Management In Drinking Water Distribution Systems, Ahmed A. Abokifa

McKelvey School of Engineering Graduate Student Theses & Dissertations

Drinking water supply systems belong to the group of critical infrastructure systems that support the socioeconomic development of our modern societies. In addition, drinking water infrastructure plays a key role in the protection of public health by providing a common access to clean and safe water for all our municipal, industrial, and firefighting purposes. Yet, in the United States, much of our national water infrastructure is now approaching the end of its useful life while investments in its replacement and rehabilitation have been consistently inadequate. Furthermore, the aging water infrastructure has often been operated empirically, and the embracement of modern …

Coupling Of Geochemical Reactions And Geophysical Properties Of Clay Minerals In Energy-Related Subsurface Engineered Systems, Lijie Zhang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Engineered subsurface operations, such as geologic CO2 sequestration (GCS) and CO2-enhanced unconventional oil/gas recovery, are promising strategies to mitigate global warming and meet energy demands. At subsurface sites, CO2-saturated brine–mineral interactions can be affected by aqueous species, either naturally existing or injected, and the interactions may further affect the geophysical properties of rocks and minerals, such as their porosity, permeability, and wettability. Such geophysical properties can control the sealing integrity of the caprock layer, which is essential to safe and efficient long-term CO2 storage. Moreover, the flow and transport of fluids at subsurface sites are also influenced by the geophysical …

Fundamental Studies Of Solid-Fuel Combustion Using A Two-Stage Flat-Flame Burner, Adewale Ayodeji Adeosun

McKelvey School of Engineering Graduate Student Theses & Dissertations

Innovative coal technologies are essential for addressing concerns about air pollution and global climate change. A key pathway to advancing these technologies is through developing a thorough understanding of the fundamental physical and chemical processes that occur during coal combustion. Ignition influences many aspects of coal combustion, including flame stability, submicron aerosol evolution, and char burnout. As important as ignition and these associated processes are, they are challenging to study because they depend on many factors, such as the combustion environment, particle size, and particle-particle interactions.

While there have been many studies of coal ignition, none have studied the process …

Multi-Scale Studies To Develop A Holistic Understanding Of Solid Fuel Combustion At Residential Scale, Sameer Patel

McKelvey School of Engineering Graduate Student Theses & Dissertations

Nearly 3 billion people rely on solid fuels for their cooking and heating needs, classifying them as “energy poor”. This poverty can be attributed to several factors, including a lack of resources (fuel), inefficient infrastructure (production and distribution), limited purchasing power (poverty), and ill-devised policies. Solid fuels, such as biomass, coal, and dung cakes, are burned in inefficient cookstoves. They generate products of incomplete combustion (PIC), such as CO, particulate matter (PM), and CH4, causing household air pollution (HAP) whose adverse impacts on both health and the environment have been well established.

HAP causes diseases such as chronic obstructive pulmonary …

Coupling Of Oxidation-Reduction Reactions Of Chromium, Iron And Manganese: Implications For The Fate And Mobility Of Chromium In Aquatic Environments, Chao Pan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Both within the United States and internationally, hexavalent chromium (Cr(VI)) is a contaminant of concern in drinking water supplies. The U.S. Environmental Protection Agency is considering a Cr(VI)-specific standard. Thus improved technologies for Cr(VI) removal in drinking water are needed. Iron electrocoagulation for Cr(VI) removal was examined at conditions directly relevant to drinking water treatment, and humic acid (HA) affects the performance of electrocoagulation in multiple ways. The success of the chromium treatment or remediation also relies on the stability of the Cr(III)-containing solids with respect to reoxidation under groundwater conditions. Manganese is ubiquitous in aquatic and terrestrial environments, and …

Aluminosilicate Dissolution And Silicate Carbonation During Geologic Co2 Sequestration, Yujia Min

McKelvey School of Engineering Graduate Student Theses & Dissertations

Geologic CO2 sequestration (GCS) is considered a promising method to reduce anthropogenic CO2 emission. Assessing the supercritical CO2 (scCO2)¬–gas or liquid phase water (g, l)–mineral interactions is critical to evaluating the viability of GCS processes. This work contributes to our understanding of geochemical reactions at CO2¬–water (g, l)–mineral interfaces, by investigating the dissolution of aluminosilicates in CO2-acidified water (l). Plagioclase and biotite were chosen as model minerals in reservoir rock and caprock, respectively. To elucidate the effects of brine chemistry, first, the influences of cations in brine including Na, Ca, and K, have been investigated. In addition to the cations, …

Sorption Of Metals Onto Natural Sediments And Engineered Iron Oxide Nanoparticles, Zezhen Pan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Metal contamination of subsurface environments and engineered water systems can be derived from natural processes and anthropogenic activities associated with industrial processes, past weapons production, and mining works. The toxic and carcinogenic effects of uranium and chromium pose a significant risk to the environment and human health. For uranium contamination in subsurface environments, phosphate addition has been performed for in-situ immobilization, which can avoid the costs associated with pump-and-treat or excavation-based remediation strategies. The interactions of uranium and phosphate in Hanford sediments had been insufficiently explored in terms of its site-specific groundwater chemistry and aquifer sediment properties. For water treatment …

The Effect Of Diffusive Transport On Mineral Carbonation In Geologic Carbon Sequestration, Wei Xiong

McKelvey School of Engineering Graduate Student Theses & Dissertations

Geologic carbon sequestration (GCS) is an effective method to mitigate environmental problems due to excessive anthropogenic CO2 emissions. It involves injecting supercritical CO2 into deep geologic formations in which CO2 will ultimately be converted to solid carbonate minerals. Basalt is a promising host rock that is rich in the divalent cations Ca, Mg and Fe that are important for mineral trapping of CO2. Fractures and pores in basalt reservoirs provide substantial surface area for geochemical reactions during carbon sequestration. The transport in fractures and pores is controlled by diffusion. The coupling of diffusive transport and geochemical reactions leads to carbonate …

Sub 2 Nm Particle Characterization In Systems With Aerosol Formation And Growth, Yang Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Aerosol science and technology enable continual advances in material synthesis and atmospheric pollutant control. Among these advances, one important frontier is characterizing the initial stages of particle formation by real time measurement of particles below 2 nm in size. Sub 2 nm particles play important roles by acting as seeds for particle growth, ultimately determining the final properties of the generated particles. Tailoring nanoparticle properties requires a thorough understanding and precise control of the particle formation processes, which in turn requires characterizing nanoparticle formation from the initial stages. The knowledge on particle formation in early stages can also be applied …

Nanoparticle Formation In The Flame Synthesis Of Multicomponent Nanostructured Materials For Clean Energy Applications, Jiaxi Fang

McKelvey School of Engineering Graduate Student Theses & Dissertations

This dissertation studies the initial stages of particle formation during the combustion synthesis of multicomponent nanomaterials. Combustion is commonly used for the production of nanomaterials at industrial scales and has advantages of high production rates, low waste generation, and scalability. However, there are limitations in being able to apply this synthesis approach to more advanced multicomponent systems. Gas to particle conversion in flames occurs through precursor decomposition, collisional growth, coagulation, condensation, and sintering. There is a fundamental gap in knowledge on the initial stages of particle formation in flames below 2nm due to measurement difficulties and instrumentation limitations. Using a …

Calcium Carbonate Formation In Energy-Related Subsurface Environments And Engineered Systems, Qingyun Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

Geologic CO2 sequestration (GCS) in subsurface saline aquifers is a promising strategy to mitigate climate change caused by increasing anthropogenic CO2 emissions from energy production. At GCS sites, interactions between fluids and geomedia are important because they can affect CO2 trapping efficiency and the safety of CO2 storage. These interactions include the dissolution and precipitation of minerals. One of the most important minerals is calcium carbonate, because it can permanently trap CO2.

In this work, Portland cement was used as a model geomedium to investigate the chemical reactions, mechanical alterations, transport of reactive fluids, and the interplay of all these …

Crumpled Graphene Oxide: Aerosol Synthesis And Environmental Applications, Yi Jiang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Environmental technologies, such as for water treatment, have advanced significantly due to the rapid expansion and application of nanoscale material science and engineering. In particular, two-dimensional graphene oxide (GO), has demonstrated considerable potential for advancing and even revolutionizing some of these technologies, such as engineered photocatalysts and membranes. To realize such potential, an industrially scalable process is needed to produce monomeric and aggregation-resistant GO nanostructures/composites, in addition to new knowledge of material properties, behavior, and performance within an environmental context.

Research presented in this thesis addresses both scientific and engineering gaps through the development of a simple, yet robust aerosol-based …

Nanostructured Thin Film Synthesis By Aerosol Chemical Vapor Deposition For Energy Storage Applications, Tandeep Singh Chadha

McKelvey School of Engineering Graduate Student Theses & Dissertations

Renewable energy sources offer a viable solution to the growing energy demand while mitigating concerns for greenhouse gas emissions and climate change. This has led to a tremendous momentum towards solar and wind-based energy harvesting technologies driving efficiencies higher and costs lower. However, the intermittent nature of these energy sources necessitates energy storage technologies, which remain the Achilles heel in meeting the renewable energy goals. This dissertation focusses on two approaches for addressing the needs of energy storage: first, targeting direct solar to fuel conversion via photoelectrochemical water-splitting and second, improving the performance of current rechargeable batteries by developing new …

Modeling, Simulation, And Analysis Of Lithium-Ion Batteries For Grid-Scale Applications, Matthew Thomas Lawder

McKelvey School of Engineering Graduate Student Theses & Dissertations

Lithium-ion batteries have become universally present in daily life, being used across a wide range of portable consumer electronics. These batteries are advantageous compared to other forms of energy storage due to their high energy density and long cycle life. These characteristics make lithium-ion batteries advantageous for many new and developing applications that require large scale energy storage such as electric vehicles and the utility grid. Typical uses for lithium-ion batteries require consistent cycling patterns that are predictable and easy to approximate across all uses, but new large scale applications will have much more dynamic demands. The cycling patterns for …

Environmental Fullerene Chemistry: Elucidating Critical Reaction Pathways And Resulting Products In The Aqueous Phase, Jiewei Wu

McKelvey School of Engineering Graduate Student Theses & Dissertations

As the production of fullerenes and fullerene-based materials approaches industrial scale, there are increasing interests/concerns regarding their (potential) environmental impact(s) upon release. To date, a number of critical, aqueous-based fullerene transformation pathways under environmentally relevant conditions remain poorly understood. Comprehensive, fundamental, and quantitative understanding of the potential (major) reaction pathways and resulting products of fullerene materials, particularly in aquatic systems, is now crucial for their accurate fate, transport, life cycle, risk assessment(s), and thus ultimate material sustainability.

Herein, this dissertation is focused on identifying and elucidating aqueous transformation pathways of fullerene materials, focused on C60 as a model fullerene, under …