Environmental Engineering Commons^™

The Very Basics Of Sustainability - An Alternative Viewpoint (Slides With Audio) (Large File! To Speed Up Download, Right-Click On "Download" Link To Save To Own Pc.), Jim Mcgovern

Other resources

This presentation sets out the very basics of ‘sustainability’, although a definition of sustainability is not attempted. Some of the very basics are the context in which the Earth and humankind exist in space and time, the Earth’s climate, the Earth’s population and humankind’s options and choices. The author advocates keeping an open mind on all available options, including the use of oil, gas, coal, tar sands, carbon capture and sequestration, nuclear power etc., as well as the technologies that are more widely considered ‘green’. The author also argues that, in addressing the challenges that humankind faces, globally concerted effort …

Temperature Influence And Heat Management Requirements Of Microalgae Cultivation In Photobioreactors, Thomas Hagen Mehlitz

Master's Theses

Microalgae are considered one of the most promising feedstocks for biofuel production for the future. The most efficient way to produce vast amounts of algal biomass is the use of closed tubular photobioreactors (PBR). The heat requirement for a given system is a major concern since the best algae growth rates are obtained between 25-30 °C, depending on the specific strain. A procedure to determine temperature influence on algal growth rates was developed for a lab-scale PBR system using the species Chlorella. A maximum growth rate of 1.44 doublings per day at 29 °C (optimal temperature) was determined. In addition, …

2008 Fall Engr333 Project Final Report, 2008 Fall Engr333

ENGR 333

The Calvin College Engineering 333 class of 2008 was challenged with the question, “What would it take to implement an energy efficiency fund at Calvin?” Before addressing this question, another had to be asked: “What is an energy efficiency fund?” An energy efficiency fund is a revolving fund which takes seed money from donations, tuition, or grants and invests it into projects that save energy. Energy cost savings from the projects are routed back to the fund to help it grow and enable it to finance future projects. In order to begin this, the senior engineering students began organizing and …

2008 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2008 semester ENGR333 project assessed the feasibility of a Green Revolving Fund for Calvin College. I asked the students “What would it take to implement a Calvin Energy Efficiency Fund (CEEF)?”

The project emerged from the work of the previous year’s students who uncovered the concept of green revolving funds.

Immediately after the Fall 2008 semester, I went on sabbatical to South Africa for all of 2009. While I was away, the Calvin administration established the Calvin Energy Recovery Fund (CERF). Over the next decade, CERF saved hundreds of thousands of dollars in energy costs and was …

Estimating Energy Savings In Compressed Air Systems, Chris Schmidt, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Compressed air is typically one of the most expensive utilities in an industrial facility. As a result, potential savings opportunities are aggressively sought out and identified. Once identified, projected energy savings must be calculated in order to justify the cost of implementing the savings opportunity. It is important to calculate projected energy and cost savings as accurately as possible. Unfortunately, savings are frequently overestimated because the methods used to estimate savings neglect to consider important factors such as compressor control and type, storage, and multiple compressor operation.

In this paper, a methodology is presented for modeling air compressor performance and …

Power Characteristics Of Industrial Air Compressors, Chris Schmidt, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

The power draw characteristics of air compressors are primarily determined by the type of compressor control and the relationship between the compressor’s output capacity and the compressed air demand in the plant. In this paper, we review the most common types of compressor control for small reciprocating and rotary air compressors, and derive relations for estimating compressed air output as a function of the type of control and motor loading. Using these relations, we develop a method to estimate the ratio of compressed air output to energy input, which we call the average operating efficiency, based on input power to …

Maine Guide To Energy Efficient Residential Construction : A Manual Of Accepted Practices, State Of Maine Energy Conservation Division

Maine Collection

Maine Guide to Energy Efficient Residential Construction : A Manual of Accepted Practices

State of Maine Energy Conservation Division, Department of Economic and Community Development, 59 State House Station, Augusta, Maine 04333-0059

Second Edition - November, 1997

Contents: Dedication / Acknowledgements / Introduction / Part 1. Summary of Maine's Residential Energy Standards / Part 2. Siting and Initial Design Considerations / Part 3. Important Considerations for the Design Phase / Part 4. Recommended Construction Practices / Appendixes

Bulletin No 4216 - Broadscale Boom Spraying, Roger Doyle, Gary Dorr, Des Gilbey, John Peirce

Bulletins 4000 -

For spraying to be effective it must do the job required at a minimum cost, with no unwanted side effects. It is impo1tant to use the right chemical at the right rate, at the right tin1e and in the best conditions.

It is just as important that both the sprayer and the way it is used allows you to meet this objective. This Bulletin will help you select the right boom sprayer, maintain it for efficient operation and use it efficiently and safely.

Feasibility Study Of Maine's Small Hydropower Potential, James D. Sysko

Maine Collection

Feasibility Study of Maine's Small Hydropower Potential

Prepared by James D. Sysko, Small Hydro East, for the Maine State Planning Office, Maine Office of Energy Resources, January 1989.

"This study focuses on finding potential hydropower sites of approximately 50 kw to 1000 kw in capacity."

Development Of A Spray Drought Cooling Tower, O. K. Kaunde

Tanzania Journal of Engineering and Technology (TJET)

ABSTRACT A noval type direct contact cooling tower has been proposed in which the gas or air entering the tower is drawn by the ejector action of the sprays through which the feed water is admitted. The advantage offered by this type of tower is that it eliminates the usages of fan, thus saving the capital cost and power to drive it.

Entrainment of air by water was studied in a laboratory cooling tower and the result of the entire experiment indicate that the development of a spray drought tower is a feasible practice.

Transient Flow Inverse Study Calculation Of Unsaturated Permeability Of Wood, Farid Piroozmandi

Dissertations and Theses

One of the major processes in lumber industry is wood drying. This process consumes large amounts of energy and capital, and due to the length of time it takes, it acts as a governing factor in lumber production levels. Development of improvements in processes and equipment used in wood drying can be expedited through computer simulation of various drying procedures. These numerical simulations depend on the accuracy of numerical models representing wood transport properties, including functional dependency of liquid permeability through wood with respect to local saturation level. Data available in the literature mainly represent wood permeability properties at fully …

Fundy Tidal Power Development : Preliminary Evaluation Of Its Environmental Consequences To The Resources Of The State Of Maine, Bigelow Laboratory For Ocean Sciences

Maine Collection

Fundy Tidal Power Development : Preliminary Evaluation of Its Environmental Consequences to the Resources of the State of Maine

A Report to the Maine State Planning Office by the Bigelow Laboratory for Ocean Sciences, April, 1984.

"Technical Report No. 35 - Bigelow Laboratory for Ocean Sciences, West Boothbay Harbor, Maine - A Division of Northeastern Research Foundation, Inc."

Contents: Executive Summary / Introduction / Methods / Physical and Biological Consequences / Socio-Economic Consequences / Research Needs / Bibliography / Appendix I. Written Comments on Greenberg Model

The Economics Of Solar Water Heaters : A Guide For Evaluating The Cost-Effectiveness Of Active Solar Water Heating Systems In Maine, Maine Office Of Energy Resources

Maine Collection

The Economics of Solar Water Heaters : A Guide for Evaluating the Cost-Effectiveness of Active Solar Water Heating Systems in Maine

State of Maine, Executive Department, Office of Energy Resources,

Augusta, Maine (July, 1979).

Contents: Section I: Introduction / Section II: Economic Method: The Life Cycle Cost Analysis / Section III: Factors Affecting the Decision to Buy / Section IV: Explanation of the Tables / Table I - Table IIIA

A Practical Guide To Building Contour Banks With A Road Grader, J E. Watson

Journal of the Department of Agriculture, Western Australia, Series 4

THOUSANDS of miles of contour banks have been built in Western Australia, and most of this earthmoving has been done by tractor and disc plough* or by road grader.

This article describes the technique recommended for bank construction with the road grader.

Water Conservation On The Farm, John W. Lewis

Journal of the Department of Agriculture, Western Australia, Series 4

SMALL scale conservation of water for agricultural use is becoming increasingly important throughout Australia.

As land development intensifies, it is natural that farmers turn to more dams and earthen tanks for stock water and irrigation.

Adequate water is essential to supply the carrying capacities made possible by improved pastures, and where greater quantities of water can be stored, fodder crops, pastures, orchards and vegetables can be irrigated.