Environmental Engineering Commons^™

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore

Conference papers

As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …

Low-Cost And Reliable Integrated Hardware And Software Framework For Remotely Operated Water Release From Storage Units, Vivek Verma

FIU Electronic Theses and Dissertations

The main contribution of this research is towards the broader area of water management that can be used for multiple purposes. For instance, floods can be mitigated using a novel approach based on the integrated dynamic management of water storage units such as reservoirs, wetlands, and ponds. This approach will enable adaptive water release from storage units hours or days ahead of rainfall events, thereby maximizing storage capacity and minimizing flooding.

This approach can be implemented by retrofitting water storage units using siphon hydraulic systems and are remotely controlled in an integrated manner using the decision support system. To make …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Aly Mousaad Aly, Faiaz Khaled

Faculty Publications

Large-eddy simulation (LES) has proven to offer superior accuracy in regards to predicting surface pressures compared to the Reynolds-averaged Navier Stokes (RANS) models. However, the primary impediment is the high computational cost associated with LES. The authors attempt to investigate the computational cost and accuracy by employing different sub-grid scale (SGS) models in LES and hybrid RANS-LES models. One of the prerequisites of accurate pressure estimations is to ensure a horizontally homogeneous empty computational domain. This study aims to compare the computational competence qualitatively and quantitatively using an empty domain in regards to the ability to maintain horizontal homogeneity. The …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

The Influence Of Channel Deepening On Tides, River Discharge Effects, And Storm Surge, Stefan A. Talke, Ramin Familkhalili, David A. Jay

Civil and Environmental Engineering Faculty Publications and Presentations

We combine archival research, semi-analytical models, and numerical simulations to address the following question: how do changes to channel geometry alter tidal properties and flood dynamics in a hyposynchronous, strongly frictional estuary with a landward decay in tidal amplitudes? Records in the Saint Johns River Estuary since the 1890s show that tidal range has doubled in Jacksonville, Florida. Near the estuary inlet, tidal discharge approximately doubled but tidal amplitudes increased only ~6%. Modeling shows that increased shipping channel depths from 5-6 to ~13m drove the observed changes, with other factors like channel shortening and width reduction producing comparatively minor effects. …

Evaluating The Sustainability Of Infrastructure Projects During Front-End Planning Phase, Valentina Ferrer Rivero

FIU Electronic Theses and Dissertations

Front-End Planning (FEP) for Sustainable Infrastructure (SI) projects is a promising process that can support addressing multiple challenges in infrastructure projects (i.e. cost overruns, schedule delays, and poor sustainability). This study aims to investigate synergies between sustainability and FEP tools for infrastructures through stakeholders’ surveys, multiple case-study analyses, and a Problem-Based Learning (PBL) activity with students. The PBL activity enhanced students’ knowledge on FEP for SI projects, and, together with other analyses, it helped in defining three different frameworks that correlate sustainability and FEP tools for infrastructure projects. The findings of this thesis contribute to the infrastructure, engineering and construction …

Modeling The Effectiveness Of Cooling Trenches For Stormwater Temperature Mitigation, Scott A. Wells

Civil and Environmental Engineering Faculty Publications and Presentations

Due to elevated runoff stormwater temperatures from impervious areas, one management strategy to reduce stormwater temperature is the use of underground flow through rock media termed a cooling trench. This paper examines the governing equations for the liquid phase and media phases for modeling the temperature leaving a cooling trench assuming that changes in temperature occurred longitudinally through the cooling trench. This model is dependent on parameters such as the media type, porosity, media initial temperature, inflow rate, and inflow temperature. Several approaches were explored mathematically for evaluating the change in temperature of the water and the cooling trench media. …

Implementation Of A Novel Inertial Mass System And Comparison To Existing Mass-Rig Systems For Shake Table Experiments, Alvaro Lopez, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

Shake table testing is one of the more effective experimental approaches used to study and evaluate seismic performance of structures. Reduced-scale models can still result in large-scale specimens where incorporating the required inertial mass effectively and safely can be challenging. This study proposes a new system of arranging the mass in the experiments that combines the realism of mass participation during earthquake excitation when supported by the shake table with laboratory practicality considerations of the mass positioned off the specimen. The characteristics and dynamic motion equations for the proposed system are described and applied to shake table experiments involving large-scale …

Breaking Wave Hazard Estimation Model For The U.S. Atlantic Coast, Spencer T. Hallowell

Publications

As offshore wind development is in its infancy along the U.S. Atlantic Coast challenges arise due to the effects of strong storms such as hurricanes. Breaking waves on offshore structures induced by hurricanes are of particular concern to offshore structures due to high magnitude impulse loads caused by wave slamming. Prediction of breaking wave hazards is important in offshore design for load cases using long mean return periods of environmental conditions. A breaking wave hazard estimation model (BWHEM) is introduced that provides a means for assessing breaking hazard at long mean return periods over a large domain along the U.S. …

A Critical Examination Of Visual Programming And Generative Design For The Compliance Checking Of Open Plan Office Layouts Against Hse Guidelines Post Covid-19., Bim Tudublin, Ronan Byrne

Capstone Reports

The purpose of this study is to explore the feasibility of Visual Programming (VP) and Generative Design (GD) in assisting employers review open plan office layouts against Ireland’s HSE guidelines implemented in May 2020 in response to Covid-19. The pandemic has affected all areas of life with workplace standards requiring a complete overhaul. This study will attempt to ascertain compliance with natural ventilation and social distancing requirements through the completion of an experimental research study, utilising Computational Design (CD) tools. A GD study will be undertaken to provide the designer with numerous office layout design solutions to evaluate and evolve. …

Opportunities In The Irish Reinforced Concrete Industry For Lean And Bim Adoption, Bim Tudublin, Kieran Mcconnell

Capstone Reports

The Irish Reinforced Concrete (RC) sector has yet to realise the full potential of Building Information Modelling (BIM) and Lean construction. The positive impacts and benefits of both BIM and Lean in the wider Architecture, Engineering and Construction sector are widely recognised; many of these are transferable to the RC sector, but there is limited research and knowledge on practical transference, uses and advantages. This research aims to fill some of the existing knowledge gaps by examining BIM and Lean adoption and awareness in the Irish RC sector across sub-sectors, professions, and organisational levels, and by exploring opportunities for increasing …

To What Extent Can Lean Construction Processes And Principles Be Utilised In The Design Stage Of A Bim Project In The Irish Design And Construction Industry, Bim Tudublin, Barry Sheramn

Capstone Reports

Although different in many ways, Building Information Modelling (BIM) and Lean Construction are two processes that are having a significant impact on the Design & Construction Industry. In recent years, the Irish AECO industry has seen a tenfold increase across numerous construction disciplines with the adoption of new workflows and processes centred around both BIM and Lean methodologies. Existing literature identifies a strong synergistic relationship between the two processes and highlights the opportunity for Lean processes and principles to be implemented into the design stage workflow. This paper investigated existing literature relating to several lean processes currently implemented in the …

Should Acoustic Simulation Technology Be Utilised In Architectural Practice? Does It Have The Potential For Bim Integration?, Bim Tudublin, Keith Harvey

Capstone Reports

The research presented in this paper, firstly, aims to convey the importance of our acoustic environment through focusing on the effects of undesirable acoustic conditions on cognitive abilities in spaces where cognitive performance is of the utmost concern, our learning environments. Secondly, it aims to investigate current state-of-the-art acoustic simulation methods, available platforms, and their levels of interoperability with architectural BIM authoring software. Structured interviews were carried out with 7 Irish architects and architectural technologists to determine if a disconnection between architectural design and acoustic performance exists and to identify the advantages and disadvantages of current workflows for acoustic performance …

High-Temperature Performance Of Ambient-Cured Alkali- Activated Binder Concrete, Kruthi Kiran Ramagiri, Darshan Chauhan, Shashank Gupta, Arkamitra Kar, Dibyendu Adak, Abhijit Mukherjee

Civil and Environmental Engineering Faculty Publications and Presentations

Owing to their lower carbon footprint and efficient performance compared to portland cement (PC), alkali-activated binders (AAB) show promising potential as an alternative to PC. The present paper investigates the high-temperature performance of AAB concrete through compressive and bond strength tests. Four different AAB concrete mixes with varying proportions of fly ash: slag (100:0, 70:30, 60:40, and 50:50) cured under ambient conditions are exposed to elevated temperatures. The mechanical performance of AAB concrete is corroborated with microstructural changes. The results show that AAB concrete with fly ash: slag ratio of 70:30 exhibits the best mechanical performance after exposure to elevated …

Optimisation Of Retrofit Wall Insulation: An Irish Case Study, Rakshit D. Muddu, D M. Gowda, Anthony James Robinson, Aimee Byrne

Articles

Ireland has one of the highest rates of emissions per capita in the world and its residential sector is responsible for approximately 10% of total national CO2 emissions. Therefore, reducing the CO2 emissions in this sector will play a decisive role in achieving EU targets of reducing emissions by 40% by 2030. To better inform decisions regarding retrofit of the existing building stock, this study proposes Optimum Insulation Thicknesses (OIT) for typical walls in 25 regions in Ireland. The calculation of OIT includes annual heat energy expenditure, CO2 emissions, and material payback period. The approach taken is based on Heating …

Large-Scale Variation In Wave Attenuation Of Oyster Reef Living Shorelines And The Influence Of Inundation Duration, Rebecca L. Morris, Megan K. La Peyre, Bret M. Webb, Danielle A. Marshall, Donna M. Bilkovic, Just Cebrian, Giovanna Mcclenachan, Kelly M. Kibler, Linda J. Walters, David Bushek, Eric L. Sparks, Nigel A. Temple, Joshua Moody, Kory Angstadt, Joshua Goff, Maura Boswell, Paul Sacks, Stephen E. Swearer

Civil & Environmental Engineering Faculty Publications

One of the paramount goals of oyster reef living shorelines is to achieve sustained and adaptive coastal protection, which requires meeting ecological (i.e., develop a self-sustaining oyster population) and engineering (i.e., provide coastal defense) targets. In a large-scale comparison along the Atlantic and Gulf coasts of the United States, the efficacy of various designs of oyster reef living shorelines at providing wave attenuation was evaluated accounting for the ecological limitations of oysters with regards to inundation duration. A critical threshold for intertidal oyster reef establishment is 50% inundation duration. Living shorelines that spent less than half of the time ( …

Freeways And Farms: Veggielution & Taylor Street Urban Farms Study, Joshua Baur, Ashley Estrada

Mineta Transportation Institute Publications

This report presents the results of a project conducted by researchers at San Jose State University in partnership with Veggielution and Taylor Street Farm staff, funded by the Mineta Transportation Institute in San Jose, CA. The research team interviewed staff and volunteer farm workers to explore how nearby roadways impact experiences at farm sites. Research on outdoor nature-based recreation consistently identifies peaceful, natural site characteristics as important to a positive outdoor experience. This project sought to identify whether farm user attitudes and experiences would be consistent with these research findings resulting in farm users reporting that nearby roadways negatively impacted …

Promoting The Sustainable Utilization Of Groundwater Resources In Ethiopia Using The Integrated Groundwater Footprint Index, Xinyu Lin

Honors Scholar Theses

The country of Ethiopia is highly vulnerable to human-caused climate change and is already suffering from the effects. The predominately rural population relies heavily on small-scale agriculture, with 78% of households having at least one member engaged in the field, yet staple crops are highly susceptible to droughts and other weather shocks. Total and agricultural GDP growth in the country have been strongly linked to inter-annual rainfall variability, of which Ethiopia has among the highest in sub-Saharan Africa. A decrease in rainfall since the 1970s has been one of the primary causes of low crop yields, and stresses the immediate …

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

Finding Patterns In Subsurface Using Bayesian Machine Learning Approach, Wang Hui

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Stochastic simulation approaches and uncertainty quantification are usually adopted for gaining insight into variability in soil stratigraphy configurations. Previous investigations at geotechnical site characterization and interpretation can be broadly categorized into geostatistics- and process-based methods. On the other hand, modern site exploration techniques provide high-quality, dense datasets in physical spaces with high resolution, either directly from sensors (for example, cone penetration testing data) or indirectly from geophysical inversion (such as seismic inversion, electromagnetic induction inversion, and ground penetrating radar). In this work, anisotropy and heterogeneity are considered as possible patterns that inherently exist in the observations, and these are inferred …

Wireless Underground Communications In Sewer And Stormwater Overflow Monitoring: Radio Waves Through Soil And Asphalt Medium, Usman Raza, Abdul Salam

Faculty Publications

Storm drains and sanitary sewers are prone to backups and overflows due to extra amount wastewater entering the pipes. To prevent that, it is imperative to efficiently monitor the urban underground infrastructure. The combination of sensors system and wireless underground communication system can be used to realize urban underground IoT applications, e.g., storm water and wastewater overflow monitoring systems. The aim of this article is to establish a feasibility of the use of wireless underground communications techniques, and wave propagation through the subsurface soil and asphalt layers, in an underground pavement system for storm water and sewer overflow monitoring application. …

Sea Level, Tidal, And River Flow Trends In The Lower Columbia River Estuary, 1853-Present, Stefan Talke, Andrew Mahedy, David A. Jay, Patrick Lau, Conrad Hilley, Amanda Hudson

Civil and Environmental Engineering Faculty Publications and Presentations

Few tidal records are available pre-1900 for the Pacific Ocean. We improve data coverage by recovering historical tabulations and digitizing analog tide rolls from Astoria, Oregon for 1853-1876. Nearly 13,500 overlapping images of tides from 1855-1870 were digitized at a 6 minute resolution using a line-finding algorithm. Available hourly and high/low tabulations were also digitized, as were nearby hourly records from 1933-1943. Uncertainty was assessed by evaluating manual staff measurements, historical documents, and leveling surveys. Results suggest that uncertainty in mean sea level varies from ± 0.07m (early 1850s) to ± 0.03m (1867-1876) and is driven primarily by datum and …

Sustainable And Resilient Construction: Current Status And Future Challenges, Niamh Murtagh, Lloyd Scott, Jingli Fan

Articles

The construction industry globally is one of the most environmentally damaging of sectors. Additionally, the resources consumed and the operational energy requirements of buildings are ‘locked-in’, potentially for decades. The Intergovernmental Panel on Climate Change has recognised construction as a sector in which significant improvements can, and indeed must, be made. But the industry is often argued to be unique, in its multiplicity of stakeholders, transient organisational structures, avoidance of risk and impact on society. The current Virtual Special Issue (VSI) sought to bring together a collection of papers on progress and potential for improvement in the construction sector, in …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

Steel Model Approval: Can Bim Provide A Drawing-Free Approval Process?, Bim Tudublin, David Reynolds

Capstone Reports

Despite widespread use of Building Information Modelling (BIM) software used within their industry, the approval of steelwork contractor’s design information is largely based on the approval of 2d-drawings. These workflows can be modernised to take advantage of current technology and provide productivity gains, but barriers to change exist. This research is an attempt to answer the research question of if a model-based approval process, which removes the need for drawings, is achievable. To answer this question, a mixed methodology was used. A literature review was performed to understand how the approval process works, what information is required and what BIM …

A Critical Examination Of The Use Of Business Intelligence (Bi) In The Optioneering Of Generative Design Models: A Case Study., Bim Tudublin, Davitt Lamon

Capstone Reports

This research outlines the development of a generative des ign workflow for the architectural space planning of a 1,200 sq.m office located in Dublin, Ireland, and the application of statistical analysis and data visualisation for the optioneering of gen erated models. First, the paper defines a computational desig n model with the potential to generate a variety of office layouts, including circulation routes and desk locations. It then identifies three unique performance metrics that evaluate each design option. Finally, the study applies a multi objective genetic algorithm (MOGA) to explore the high dimensional design space of all potential options and …

Advancement Of Predictive Modeling Of Zeta Potentials (Ζ) In Metal Oxide Nanoparticles With Correlation Intensity Index (Cii), Andrey A. Toropov, Natalia Sizochenko, Alla P. Toropova, Danuta Leszczynska, Jerzy Leszczynski

Articles

It was expected that index of the ideality of correlation (IIC) and correlation intensity index (CII) could be used as possible tools to improve the predictive power of the quantitative model for zeta potential of nanoparticles. In this paper, we test how the statistical quality of quantitative structure-activity models for zeta potentials (ζ, a common measurement that reflects surface charge and stability of nanomaterial) could be improved with the use of these two indexes. Our hypothesis was tested using the benchmark data set that consists of 87 measurements of zeta potentials in water. We used quasi-SMILES molecular representation to take …

Example Take-Home Final Exam Questions From Cee 433: Water Technology & Policy At The University Of Illinois At Urbana-Champaign, Ashlynn Stillwell

All ECSTATIC Materials

The following example questions were part of take-home final exams spanning 2014-2020 in CEE 433: Water Technology & Policy, taught by Dr. Ashlynn S. Stillwell at the University of Illinois at Urbana-Champaign. These questions were part of the take-home final exam, with additional questions not reported here.