Construction Engineering and Management Commons^™

Investigating The Performance Of Bendable Concrete Against Traditional Concrete, Landon J. Poston

Construction Management

The qualitative research in this case study evaluates the importance of bendable concrete within various construction settings. The data aims to justify the interest in bendable concrete, as well as why it is not being used more in structural work. The intended stakeholders of this paper are concrete suppliers, contractors, and researchers who are looking for more imperative ways to manufacture a more sustainable form of concrete. Through a brief online meeting and a Google Form questionnaire, company participants were able to provide the knowledge and feedback desired for how bendable concrete can be incorporated more in the future of …

Feasibility Of Implementing A Construction Project In An International Country, Kristina Poliseri

Construction Management

This paper examines the execution of an international service project involving the construction of a complex system. It explores three distinct approaches assuming a fully designed system: building the system in the U.S. and shipping it internationally, having system pieces constructed entirely in the destination country prior to arrival for assembly, and developing a prototype in the U.S. followed by the construction of a full-scale system in the international country. Each method presents unique advantages and challenges. Building in the U.S. ensures high quality, advanced technology, and meeting tolerances, however, leads to significant fees, shipping costs, and logistical complications. Constructing …

Construction Wellness: Analyzing Mental Health Issues And Solutions For Construction Workers, Joshua Franks

Construction Management

The construction industry is known for its demanding nature, often leading to significant mental health challenges among its workforces. This study investigates mental health issues prevalent in construction, focusing on identifying key stressors and potential protective factors. A mixed-method approach was employed, combining a systematic literature review with a survey distributed to construction professionals. The survey gathered data on job satisfaction, stress, coping mechanisms, and the availability and utilization of mental health resources. Results indicated high levels of job dissatisfaction and stress, with respondents citing poor communication, excessive work hours, and lack of control over their roles as primary stressors. …

Why The Construction Industry Is Falling Behind In Technology Use, Caden Y. Daniels

Construction Management

Technology is becoming more impactful in the everyday life of almost every industry across the world. New products are being released every year to allow the mundane processes of work to be streamlined for maximum efficiency, leaving valuable time for the more pressing matters of a company. The construction industry is one of the largest and most essential industries in the world, but it has fallen behind in the use of technology. History has shown us that when new technology is introduced there is almost always some sort of pushback or buffer time for people to adopt. Just in the …

Construction Wellness: Analyzing Mental Health Issues And Solutions For Construction Workers, Joshua Franks

Construction Management

The construction industry is known for its demanding nature, often leading to significant mental health challenges among its workforces. This study investigates mental health issues prevalent in construction, focusing on identifying key stressors and potential protective factors. A mixed-method approach was employed, combining a systematic literature review with a survey distributed to construction professionals. The survey gathered data on job satisfaction, stress, coping mechanisms, and the availability and utilization of mental health resources. Results indicated high levels of job dissatisfaction and stress, with respondents citing poor communication, excessive work hours, and lack of control over their roles as primary stressors. …

Construction Panel Discussion At Arroyo Grande High School, Grace I. Devaney

Construction Management

Grace Devaney conducted a panel presentation and discussion on Wednesday, May 15, 2024, at Arroyo Grande High School for 2 architecture and engineering class periods with 5 guest speakers. The guest speakers were asked various questions about their respective careers and organizations, during which students could ask questions if something mentioned sparked curiosity. Each class was provided with flyers, made by Grace Devaney, which included the guest speaker’s names and professions, a QR code to the ACE mentorship program website, and an email followed with a survey to gauge student feedback. The purpose of this project was to expose high …

Tmha Parking Lot Project, Steven Hickman, Jack Gugale

Construction Management

The Transitional Mental Health Association (TMHA) parking lot project in Edna, California, aimed to construct a 4,400 SF decomposed granite (DG) parking lot for the TMHA’s Youth Treatment Program (YTP). TMHA’s YTP involves giving children in a transitional housing state a safe and welcoming place to live while addressing the problem of unhoused children in San Luis Obispo County. This initiative involved extensive grading, forming, surveying, and installing the necessary infrastructure to ensure both functional and aesthetic improvements for the facility. The project was meticulously planned and executed during the Spring, 2024 quarter, with a budget of approximately $4,285. The …

San Luis Obispo High School Ffa Farm Chicken Coop Construction, Tara R. Keene

Construction Management

This paper covers the construction process by a team of students from California Polytechnic State University, San Luis Obispo (Cal Poly) to provide a chicken coop for the San Luis Obispo High School FFA Farm. First initiated in Fall 2023, the project will replace the existing temporary chicken coops with a larger and more functional structure to house over 10 chickens. This paper focuses on the construction phase, but also briefly touches on the design and pre-construction phases. Through meetings with the client, the team of students developed a design that met the high school’s criteria and needs. Key features …

Construction Of Concrete Shear Wall & Modular Foundations - Procurement And Quality Control, Justin J. Coffin

Construction Management

This project details the planning, construction, quality control, and logistics processes throughout the construction of a concrete shear wall and modular footings. The project focused on constructing the wall and footings as they were designed to ensure they meet strength parameters to be used in the High Bay Lab at California Polytechnic State University in San Luis Obispo for seismic testing. The complex designs, encompassing dense rebar gages and post tensioned bars, required extensive hours of labor and quality control. This paper will cover the main phases of the construction process and how they were acquired. Furthermore, the considerations taken …

Exploring The Impact Of Personal Protective Equipment (Ppe) Quality On Construction Individuals, Daniel Seo

Construction Management

Personal Protective Equipment (PPE) is essential in protecting workers on construction sites. Construction sites are known to have various hazards that can lead to death or injury. While PPEs are designed to protect workers from these injuries, its usage and quality affects its capability. As PPE is distributed by construction companies, it is imperative to identify the determinants of quality PPE. These factors include psychological factors like perceived risk, comfort, and safety attitudes. Two surveys were conducted on seventeen (17) construction management industry individuals and twenty-one (21) construction management students to determine the preferences of PPE and their views regarding …

Quality Assurance And Quality Control For Reinforced Concrete Inspections, Calvin O. Walters Jr.

Publications and Research

Ensuring the safety and longevity of structures is paramount in concrete construction projects. Cases like the Big Dig ceiling collapse, which occurred on July 10, 2006, when a concrete ceiling panel measuring 20' x 40' and debris weighing 26 short tons (52,000 lb) fell within Boston's Fort Point Channel Tunnel, underscore this importance (Wald, M. L., 2007). Quality Assurance (QA) and Quality Control (QC) are crucial in mitigating such risks. QA ensures that materials and methods meet predetermined performance, design, and reliability standards specified in contracts and customer arrangements. On the other hand, QC is a strategic process businesses use …

Bim Coordination Post Pandemic, Zachary Marshall

Honors Scholar Theses

The goal of this thesis is to utilize previous research done on virtual meetings and build upon it by conducting new research on the successes and failures of current virtual BIM meetings. This paper starts with a literature review looking into Building Information Modeling (BIM) Coordination and the effects the COVID-19 pandemic has had on the BIM meetings. BIM meetings started to shift virtual due to the nature of the pandemic and this has had effects on the performance and structure of the coordination. This knowledge was then expanded on by looking at virtual BIM meeting case studies. Interviews were …

The Impact Of Disc In Construction Dialogue, Michelle W. Li

Construction Management

Personality tests look to categorize individuals based on their values, identity, psychological traits, and/or perspectives. The DISC (dominance, influential, steady, complaint) assessment is one of the major personality tests. Multiple industries like healthcare and sales have utilized DISC to foster better overall communication from work relations and positive success. Construction management (CM) is a similar industry with heavy emphasis on influence and focus. Utilizing DISC in the construction industry can achieve similar effects to the healthcare and sales industry. To analyze the potential effectiveness of DISC in the construction industry, a survey was distributed to one class of CM majors …

Taxonomy Of Trust And Maslow’S Hierarchy Of Needsin The Construction Industry, Ann B. Lyons, Vivek Sharma, Shima Clarke

The Professional Constructor

Trust is vital in every facet of life, enabling collaborative efforts and valuing contributions from various individuals. This is particularly true in the construction industry, where teamwork is essential for success. Prior research has consistently demonstrated that heightened trust levels significantly contribute to better project outcomes and increased client satisfaction. Despite its critical role, the construction industry has yet to adopt a structured hierarchical perspective of trust that aligns with its unique demands. This study aims to fill this gap by validating a comprehensive taxonomy of trust specifically designed for the construction sector. Through literature review, this study identifies key …

Computer-Integrated Construction Management With Procore, Vedanth Ashoka, M.G. Matt Syal

The Professional Constructor

The construction industry faces difficulties in managing the enormous amounts of data generated at each stage of a project, impacting project coordination and decision-making. Currently the industry is facing the issue of a lack of interoperability among the multiple software programs being used for different functions. To address this lack of interoperability, there is a need for an integrated environment that allows seamless flow of data between different functions. Among the few software tools that have emerged in recent year, Procore, a cloud-based construction project management software, has emerged as a widely used solution in the industry, enabling collaboration among …

Student Solutions For Leaf Drying: A Collaborative Approach To Enhance Moringa Production In Ghana, Daniel Desoto

Construction Management

This paper expands on a project that seeks to address the need for an updated mechanical leaf drying system for local farmers in Ghana, Africa. Working with the local organization, Moringa Connect, we were able to connect and identify potential areas of improvement within the current existing system. This project involved aspects of design, fundraising, and the construction of a rotating metal hopper. This hopper was identified as a solution for a crucial pinch point currently seen in the processing of the leaves from a wet stage to the final dry product. The design and construction process had a multidisciplinary …

Lemur Enclosure, Joshua Mancio, Justin Krietzberg

Construction Management

Zoo-to-You, a local wildlife conservation zoo, proposed a project to construct a new shelter for their lemurs due to the inadequacy of protection for extreme heat or cold weather of their previous enclosure. With three lemurs in residence, the zoo sought to create a spacious and insulated shelter that would provide protection from the elements while allowing connectivity to the adjacent enclosures. Situated amidst two existing circular cages with a gap in between, the project presented unique site conditions on a concrete slab. The scope of the project encompassed estimating, design, material procurement, build-out, and owner turnover, with the objective …

Construction Software: Use, Selection, And Performance In Low-Bid Contracting, David R. Cazares

Construction Management

The qualitative research included in this study evaluates the use, selection, and perceived gaps of current construction software suits in low-bid contracting. In addition, the data aims to provide merit to the correlation between construction software use and company performance. The intended stakeholders of this study include entrepreneurs in software development and construction, along with researchers looking to gather knowledge pertaining to this niche industry. Through a Google Forms questionnaire distributed via email, participants provide insight on the current status quo. The study’s responses show clear trends in the types of software currently in use and the subsequent reasons for …

Integrated Project Delivery (Ipd): A Contractual Framework For The Egyptian Construction Industry, Sarah Hussain

Theses and Dissertations

This abstract highlight the significant findings and contributions of the study, which aimed to develop model clauses specifically tailored to the Egyptian construction industry for multi-party construction contracts. The research methodology encompassed several key components. Firstly, a comprehensive literature review was conducted to explore the various construction delivery methods prevalent in Egypt. This review provided a solid foundation for understanding the existing practices and identifying areas for improvement. The study also delved into the concept of Integrated Project Delivery (IPD) and its potential benefits as well as an analysis of the commonly used standard forms of contract and successful case …

Barriers To The Adoption Of Digitalization In The Construction Industry: Perspectives Of Owners, Consultants, And Contractors, Rawan Al-Omari, Ghaleb Sweis, Waleed Abu-Khader, Rateb Sweis

Civil Engineering Faculty Publications

Construction organizations are moving toward adopting digitalization in response to Industry 4.0. However, the slow adoption of digitalization has been observed. This study aimed to assess the level of digitalization adoption and evaluate the barriers to adopting digitalization in the Jordanian construction industry by all project parties in the public and private sectors. The study targets were achieved through a structured questionnaire using SPSS software for analysis through the following statistical tests: Normality test, Mann-Whitney U, Kruskal-Wallis H, and Exploratory Factor Analysis (EFA). Most respondents used software at the design stage, and less than half did not use any software …

Highlighting The Key Differences In Project Management When Using Mass Timber: Case Study, Kevin Krueger

Construction Management

Mass Timber or Cross Laminated Timber (CLT) is structurally engineered wood designed to be used as the structural components of a building. As the Construction Industry shifts toward using more renewable materials, mass timber becomes more relevant. This paper presents a comprehensive case study focusing on the construction process innovations implemented in a recent mass timber project located in San Francisco. The project involves the construction of a secure facility for a prominent biotechnology company. This research aims to learn the innovative techniques and strategies that contributed to the successful completion of this unique project. Key stakeholders, including the project …

Synergising Bim And Real-Time Data For Improved Efficiency: An Irish Case Study, Ahmed Hassan, Ankur Mitra, Alan Hore, Mark Mulville

Conference Papers

The evolution of 3D visualisation and the Internet of Things (IoT) presents a substantial opportunity for integrating real-time data with Building Information Models (BIM) to improve its functionality and construction workflow efficiency. Integrating real-time data with BIM can enhance the digital representation of construction buildings’ physical and functional characteristics and provide recordable status of on-site operations. Nevertheless, the integration between Visualisation and IoT technologies with BIM remains in its preliminary stages and faces a myriad of technical and operational challenges. Furthermore, developing advanced solutions to facilitate this complex integration requires a considerable understanding of the viability and feasibility of merging …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

Analyzing The Labor Shortage In The Construction Industry And The Best Practices To Increase Worker Satisfaction, Cade Batchman

Construction Management

The construction industry is facing a significant labor shortage, which has far-reaching implications for the industry and the economy. This paper explores the causes of the shortage and the practices being implemented to address it. Economic changes, technological advancements, union/open shop dynamics, educational shifts, and the industry's image all contribute to the shortage. The economic rebound from the 1980s recession and the lack of new entrants into the field have created a demand-supply gap. Additionally, slow adoption of technology and the perception of construction work as physically demanding and risky have deterred potential workers. The decline in union membership has …

Construction Semantics And Generative Pre-Trained Transformer (Gpt) Language Models, Ankur Mitra, Ahmed Hassan, Mark Mulville

Articles

The article explores the impact of ChatGPT, a powerful language model developed by OpenAI, on the construction industry. ChatGPT, with its ability to provide contextually accurate responses to a wide range of queries, has the potential to enhance safety, scheduling, and knowledge dissemination in construction. While it shows promise in tasks like hazard recognition and project scheduling, the article emphasizes the need for cautious optimism and human oversight. The construction industry could benefit from ChatGPT's digital assistance to boost productivity and address skills shortages, but it is essential to recognize the value of human expertise alongside AI advancements.