Construction Engineering and Management Commons^™

Reliability Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The reliability of reinforced concrete bridge columns strengthened with externally bonded, steel-fiber reinforced polymer fabric subjected to blast loads was investigated. Columns were modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. Different concrete strengths, longitudinal reinforcement ratios, and gravity and blast load levels were considered, while uncertainties in material strength and stiffness parameters, as well as load characteristics, were incorporated in the probabilistic analysis. It was found that the use of SFRP can allow significant increases in blast load while maintaining the same level of column reliability.

Comparison Of The Resistance Of Belitic Calcium Sulfoaluminate Cement And Portland Cement To Sulfate Attack And Sulfuric Acid, Rilye Dillard

Graduate Theses and Dissertations

Microbially induced corrosion (MIC) is a fairly common concrete deterioration mechanism with many negative effects. MIC is a complex chemical and biological process that occurs in sewage systems and is nearly impossible to replicate in a laboratory setting. For this study, sulfate and sulfuric acid attack on concrete were studied to mimic two stages of the MIC process. The ASTM C1012, Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution and a modified ASTM C1012 accelerated method were used to compare the sulfate resistance of belitic calcium sulfoaluminate (BCSA) cement, portland cement (PC), and PC-fly …

The Effects Of Waste Marble Powder On Sustainable Concrete, Jeremy S. Tennesen

Construction Management

Sustainability has been growing consistently more popular in construction, with projects introducing innovative ideas to build greener every year. One material that has not experienced many innovations since emerging in building use is concrete. The reason behind this could be the chemical process of curing concrete being unique compared to most materials. While concrete can be broken down into some of its original components, water, cement, and admixtures used are not retainable. This makes it difficult to recycle the material, and the aggregates recovered from recycling also experience a loss in strength. With admixtures being involved in most concrete mixes …

Paso Robles Police Department Outdoor Training Facility Improvements - Phase 1, Zachary T. Stellini

Construction Management

This paper outlines the pre-construction and construction of the 24,300 square foot Paso Robles Police Department outdoor training facility improvements. The project focuses 12,000 square feet of the total site with improvements that include earthwork and new concrete flatwork. This project is group project with Gavin Abraham and Nic Petri that is broken up into 3 phases, this paper will primarily focus on the phase 1 which includes grading and excavation. The purpose of this project was to provide the Paso Robles Police Department with a modern, functional facility that allows its officers to be better equipped to protect the …

Possible Use For Recycled Disposable Face Masks In Concrete, Lauren Douglas

Construction Management

Disposable face masks are one of many single use products that are detrimental to the environment. The construction industry has been introducing new ways to incorporate recycled products into their materials. This paper addresses one possible way to use more environmentally friendly materials in the construction industry. 16 concrete cylinders were prepared using 4x8 forms. The mix was manipulated to test the impact of incorporating varying levels of disposable shredded face masks. Compressive strength and workability were measured in these cylinders. Eight cylinders were prepared for the control batch. Four cylinders were prepared using 10 oz. of shredded face masks …

Pismo Beach Lions Club Sidewalk Replacement, Ramon Hernandez Jr

Construction Management

The objective of this senior project was to provide a long lasting and safe sidewalk for all the people that attend the Lions Club for future events. The idea came to be after talking to Karen Walsh, and how many previous visitors had tripped and fallen from the uneven sidewalk. The sidewalk was originally poured over 30+ years ago, and it was time for a newly built pathway. The project involved creating an estimate, schedule and coordinating with the club to see the project all the way through. The new sidewalk is now built stronger than ever before and is …

Recycling Cigarettes Into Concrete, Jonathan R. Rosete

Construction Management

The objective of my senior project is to find a solution for the growing amount of improperly disposed cigarette butts on our planet. To accomplish this, I created and tested concrete cylinders mixed with different amounts of used cigarettes. It is my goal that we will be able to recycle cigarette butts and incorporate them into our everyday concrete use. By adding cigarettes to our mixes, I also understand their will be concerns with its potential strength. However with this in mind, it is my intention that these current mixes will only be used for non-structural concrete. In the following, …

Construction Installation Guide Concrete Reinforced Shear Wall Cal Poly Arce Department, Giovanni Koelsch Dal Canto

Construction Management

California Polytechnic University prides itself on its “Learn by Doing” teaching procedures. The “Learn by Doing” atmosphere is ingrained in every student that attends the university. It is necessary for students especially in the ARCE field to obtain real life experience before entering the professional world. Ensuring that ARCE students have a means to practice and create new knowledge in the field of reinforced concrete shear wall testing is necessary to maintain Cal Poly’s education progression. Creating a reinforced concrete shear wall that can be built year after year for ARCE students to test on has been asked for by …

Paso Robles Police Department Outdoor Training Facility Improvements – Phases 2 & 3, Gavin J. Abraham

Construction Management

This paper outlines the pre-construction and construction of the 24,300 square foot Paso Robles Police Department outdoor training facility improvements. The project focuses on 12,000 square feet of the total site with improvements that include earthwork and new concrete flatwork. This project is a group project with Zach Stellini and Nic Petri that is broken up into three phases. This report will primarily focus on phases 2 & 3, which include concrete flatwork and finish grading. The purpose of this project was to provide the Paso Robles Police Department with a modern, functional facility that allows its officers to be …

Quantitative Resistance Assessment Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The blast resistance of a typical reinforced concrete bridge pier column design was modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. While varying concrete strength, amount of longitudinal reinforcing steel, and gravity load, the effect of applying an externally bonded steel fiber reinforced polymer (SFRP) wrapping was assessed. The presented approach uniquely quantifies column blast resistance in terms of charge weight. It was found that blast capacity was roughly linearly related to concrete strength and steel reinforcement ratio, the former of which is most influential. It was further found that a single layer of …

The Viability And Simplicity Of 3d-Printed Construction: A Military Case Study, Jeneé A. Jagoda, Brandy Diggs-Mcgee, Megan Kreiger, Steven J. Schuldt

Faculty Publications

In November 2019, U.S. Marines, Air Force, and Army Corps of Engineers personnel demonstrated the viability and simplicity of three-dimensionally (3D)-printed construction in a controlled environment at the U.S. Army Engineer Research and Development Center—Construction Engineering Research Laboratory in Champaign, Illinois. The tri-service exercise spanned three days and culminated in the construction of three 1 m × 1 m × 1 m (3 ft × 3 ft × 3 ft) concrete dragon’s teeth (square pyramid military fortifications used to defend against tanks and armored vehicles) and several custom-designed objects. The structural components were printed using a custom-built, gantry-style printer called …

Analyzing More Sustainable Alternatives Than Using Ordinary Portland Cement In Commerical Construction, Brandon A. Sturla Bs

Construction Management

The purpose of this paper is to look at more sustainable alternative options for concrete use for California Commercial Contractors. This paper will analyze the more sustainable options for concrete and come to conclusions on how effective the alternative options are for protecting the environment, encouraging sustainability, maintaining cost effectiveness, and maintaining efficiency in building. This paper provides data on the negative impact concrete use has had on the environment and potential ways to alleviate this. This paper will also analyze how cost-effective the alternative options are to see if the alternative options are realistic and affordable to use in …

Evaluation Of Concrete Deck Curing Regimens Using Capillary Pressure Sensing System, Samuel Spann

Graduate Theses and Dissertations

Early-age plastic shrinkage cracking is a common problem with the construction of concrete bridge decks due to the high surface area-to-volume ratio and exposure to potentially detrimental environmental effects. Curing regimens are utilized to mitigate cracking risk during the plastic stage of the concrete; the curing regimens evaluated for this study were wet burlap-polyethylene sheeting, two acrylic curing compounds, and one lithium compound. Capillary pressure in the water filled pores has been shown to correlate to the plastic shrinkage cracking risk of concrete. A new portable system has been developed to measure the capillary pressure that could potentially be used …

Use Of Bagasse Ash As A Concrete Additive For Road Pavement Application, Gabriel Arce, Marwa Hassan, Maria Gutierrez-Wing, Michele Barbato

Data

Corresponding data set for Tran-SET Project No. 18CLSU03. Abstract of the final report is stated below for reference:

"The objective of this study was to evaluate the use of sugarcane bagasse ash (SCBA) as a partial replacement of cement in concrete for road pavement application. The study explored the pozzolanic activity of SCBA produced from three different processing methodologies (i.e., raw SCBA, controlled SCBA and post-processed SCBA). The experimental results revealed that SCBA produced by the controlled burning of sugarcane bagasse fiber (SBF) at 650°C and grinding (C-650), presented the maximum pozzolanic activity. However, this SCBA production process was deemed …

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo

Data

Corresponding data set for Tran-SET Project No. 18CNMS01. Abstract of the final report is stated below for reference:

"This research investigated the use of locally produced ultra-high performance concrete (UHPC) as a grouting material to repair deteriorated shear keys. Shear keys are used in adjacent girder superstructures to produce monolithic behavior and load transfer across the structure. Shear key durability is a concern since shear key degradation can jeopardize the integrity of the structure. Transportation agencies have reported that 75% of distress in adjacent girder bridges is due to cracking and de-bonding along shear keys. Previous research has shown that …

Interim Field Guide For Construction And Testing Of Concrete Shear Wall With Added Frp Layer, Carlos Alberto Espitia

Construction Management

In Los Angeles, many of the hospitals are no longer up to code as they were built in the 1970’s. The shear walls that the hospitals were constructed on stand to experience major failures in the event of a seismic event and this is the issue that this student research team was assigned with. This project was to design, procure, and construct all necessary constraints to be able to test a wall that is fundamentally similar to that of the sheer walls in these hospitals. Once this was complete the goal was to test two walls with an added FRP …

Advanced Concrete Course For Cal Poly Construction Management Department, Dante N. Feliciano

Construction Management

This senior project provides a solution to the Construction Management Department at Cal Poly, San Luis Obispo whose curriculum lacks an individual Concrete course. With Concrete being one of the most used building material worldwide, this course will help immensely. The goal of this project is to fill the gap with an Advanced Concrete Course that is prepared and ready to be introduced to future students. The course has an emphasis on outside research learning – where the student gets to become the instructor. Carefully thought out and executed lecture materials are included in the course. Lecture slides give background …

Habitat For Humanity Global Village: Means & Methods Of Construction In Trinidad & Tobago, Garrett Landress

Construction Management

Habitat for Humanity Global Village is a sector of Habitat for Humanity that focuses on aiding in the construction of homes for those in need around the world. Habitat for Humanity Trinidad and Tobago has been part of Habitat for Humanity Global Village for many years and aids people in need on the Island of Trinidad in the Southern Caribbean. This paper will discuss the construction of a small home for a woman whose family was disowned by her father due to her reluctance to uphold traditional Indian values. Subsequently the family was living in poverty and currently residing in …

Confronting Retainage And Its Disruptive Effects On The Business Practices Of Commercial Concrete Subcontractors, Arlen Karl Hartoonian

Construction Management

This paper aims to explore the extent of the damage that retainage is capable of inflicting on the financial health of commercial concrete subcontractors and strategies which can be utilized to mitigate or avoid damage to their financial health. The methodology implemented to conduct this exploration is a series of interviews with commercial concrete subcontractors. An analysis of these interviews in conjunction with a thorough literature review demonstrates that retainage does indeed impact financial health of commercial concrete subcontractor though the scale of the operation does make a difference in the severity of this impact. Whether or not the construction …

Comparison Of Carbon Fiber And Fiberglass On Concrete Strength, Justin A. Baker

Construction Management

The purpose of this paper is to compare two common polymers of the construction industry and determine if there are benefits of using them in concrete application to increase overall strength. The goal of the project is to complete a full experiment, utilizing concrete cylinders and beams to test the compressive and tensile properties of fiberglass and carbon fiber. This paper provides data from the experimentation of the compressive and tensile tests of carbon fiber and fiberglass to prove that these polymers are superior and aid in overall concrete strength. The experiment proved that carbon fiber is superior to fiberglass, …

Mitigating Carbon Dioxide Emissions In The Cement Industry Through Carbon Capture And Storage, Nicholas J. Cramer

Construction Management

The cement industry is responsible for 7% of industrial energy use, the third largest energy consumer in the world. The industry is also responsible for 7% of global carbon dioxide emissions, the second largest industrial emitter. With current trends continuing, global cement usage will rise with population and urbanization. The low-carbon transition of the cement industry requires innovative technologies and producer cooperation. Carbon capture and storage, known as CCS, is a safe and sustainable solution to significantly reduce the amount being released into the atmosphere. Through CCS, carbon dioxide reacts with natural alkaline minerals, such as fly ash, to create …

Analysis Of Standardized Concrete Mixes, Riley Graybeal

Williams Honors College, Honors Research Projects

Concrete is one of the most common materials used in construction. It is mass produced throughout the country, with numerous different designs for concrete mixes. A common practice among concrete manufacturers is to use a standardized concrete mix design. These standardized mix designs are pre-tested and are not usually altered frequently. The hypothesis of this research project is that manufacturers do not constantly investigate new ways to save on their mixes, and simply use the same standardized mix designs.

In this research, investigations into what alterations may reduce the cost of standardized mixes began with a baseline mix design provided …

Building A Handicap Accessible Entrance And Gabion Wall, David C. Marter

Construction Management

As people age, their bodies naturally deteriorate and often times people are confined to wheelchairs in order to get around. Uneven and unstable ground is a large obstacle for people who live confined to a wheelchair. This project was derived and designed in order to help a family with multiple family members bound to wheelchairs to allow them an easier point of access into the home. The project itself consists of the construction of a concrete walkway and a gabion wall to provide some additional aesthetics. The concrete pathway ranges from the driveway to a paver pathway that curves around …

Alternate Reinforcement For Structural Concrete, Barrett Lowe

Construction Management

Concrete has been utilized on construction projects for thousands of years, ranging from the Pyramids to the foundation your home is built on. Innovated upon, concrete and its properties have changed over the years, one of the greatest being the discovery of tensile reinforcement. Rebar, commonly known as reinforcing steel or reinforcement bars, have been used in the construction industry for decades. Ranging in size and application, rebar’s unmatched tensile strength and anti-corrosive properties make it the champion of reinforcing structural concrete. Though the advancement in technology has created a new era where other materials may take its place. Attempting …

Shrinkage Cracking In Concrete Tilt-Up Construction, Stewart Hooks, Jack Robinson

Architectural Engineering

The purpose of this project is to investigate a particular, undesirable cracking pattern in concrete tilt-up panels that, until now, did not have a known definite cause. The cause of this cracking pattern is hypothesized to be due to shrinkage restraint of the concrete panels. The cracking under investigation occurs at the bottom corners of the Tilt-Up panels, suggesting that the base of the panel is restrained from shrinkage. This project models various components of Tilt-Up Construction that have potential for restraining the panels from shrinking. This project consists of the following main components.

The first aspect of this project …

Self-Healing Concrete In Commercial Construction, James Anthony Frazier

Construction Management

Crack formation is common among concrete used for all different types of construction. While cracking is inevitable in concrete, it can create instabilities that can compromise an entire building’s structural integrity. New advancements are being made in the biological and engineering fields that are providing a solution to this problem. Certain bacteria and chemicals when mixed provide a reaction that creates limestone material to re-heal cracks in concrete. Using these materials to create this reaction, while incorporating the reactants necessary in concrete mixtures for building, it is possible to eliminate maintenance costs and improve building strength over time. Currently, these …

Recyclable Waste Material As Substitute Aggregate In Concrete, Cannon Michael Lynch

Construction Management

Trash pollution is a serious problem that the world is facing and while there are current efforts to clean up the environment, there still exists the issue of what to do with the trash once collected. Waste material, especially plastic, is littering the ocean and poses a serious threat to wildlife. The construction industry makes a good effort of trying to limit its negative impact on the environment, but it can potentially solve the problem of pollution using one specific material, concrete. The best part about concrete is that its compressive strength can be manipulated by adding or removing certain …

Concrete Industry Management In Higher Education, Irl Thomas Barajas

Construction Management

This Paper Focuses on the concrete industry and programs that prepare college students for their future in it and to try and implement some sort of concrete program at Cal Poly. The idea to make Concrete Industry Management first came along at Middle Tennessee State University in 1996, but only a few other programs have started at other schools since then. These programs focus on skills for graduates to enter the concrete industry in production, project management, sales, and marketing. They are structured similar to the way Construction Management programs are structured and have similar courses like estimating, sustainability, and …

Case Study Analysis Of Improving Productivity Rates For Self-Perform Concrete, Johnny Mcdermott

Construction Management

Productivity is one of the most important aspects of a successful construction project, especially if the work is self-performed and not sub-contracted out to another contractor. Usually the success of a project is directly correlated to how well the production has been throughout the course of the job. Often when a project manager notices their job is not doing well and not making their target profits or man-hours, productivity is usually the answer to that problem. This paper will examine the different ways and methods of tracking production that was used by Overaa construction. The focus of this study is …

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets Archive

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …