Construction Engineering and Management Commons^™

Statistical Models Of I-15 Bridge C-846: Changes In Natural Frequencies Due To Temperature, Gilbert Nichols

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Structural Health monitoring is to determine the condition of a bridge based on instrument measurements. The C-846 Bridge in Salt Lake City has such instrumentation. The bridge is located in Salt Lake City at about 2100 South and Interstate 15. This bridge has two kinds of instruments on it: accelerometers and thermocouples. The accelerometers measure the vibrations of the bridge. The accelerometers have been recording data on the bridge since 2001. The thermocouples, which measure temperature, were added as part of this thesis in April 2016.

In light of recent research, damage may be detected from measuring the change in …

A Tool To Evaluate Sustainability Of Pavement Maintenance Projects., Yibo Zhang

Electronic Theses and Dissertations

Pavement maintenance activities are widely regarded to be critical elements during pavement life cycle, different maintenance techniques have been used to restore or extend the service lives of pavements. However, the existing maintenance practices on pavement system have problems that impair the economic benefits, disturb the natural environment, and somewhat ignore the needs from stakeholders. To minimize these negative impacts, sustainability is an ideal way because it addresses the problems under Triple Bottom Line (TBL, refers to economy, environment, and society). Sustainability analysis within transportation or pavement industry has been studied in different countries, but the concept of sustainable pavement …

Subcontracting And The Survival Of Plants In The Road Construction Industry: A Panel Quantile Regression Analysis, Dakshina G. De Silva, Georgia Kosmopoulou, Carlos Lamarche

Economics Faculty Publications

This paper investigates how subcontracting parts of contracted work shapes entrants’ success and survival. We find that newly developed quantile regression approaches can be adapted to study survival of firms competing for government contracts in road construction. The method is applied on a data set that includes patterns of firm entry, exit and auction related information. We find an apparent increase in the business life of firms who subcontract out part of their projects. In Texas, these subcontracting effects appear to be more pronounced for firms with few or no options outside the industry, and among firms who contract out …

Modular House Revival, Kevin Chiang, Spencer Dilley, Sarah Dowthwaite, Trevor Houghton, Ryan Lefebvre, Michele Leung, Cameron Lober, Chris Martinez, Katie Mayer

Architectural Engineering

The Modular House, located in Poly Canyon, has seen extensive damage since the last caretaker left nearly ten years ago. To prevent further damage and improve the safety and appeal of the structure, we are proposing a renovation of the existing building that removes the existing cladding and partitions. By the end of Spring Quarter 2017, the Modular House will have a guardrail system replacing the wood paneling on the walls and a new steel composite deck to replace the current flooring system. The structural steel framing system will remain as is.

Effectiveness Of Small Strain Shear Wave Velocity As A Property For Assessing Damage Associated With Alkali-Silica Reaction In Concrete, Dillon K. Self

Civil Engineering Undergraduate Honors Theses

This research paper details the monitoring of expansion and shear wave velocity for fifteen concrete prisms cast in accordance with ASTM C1293 utilizing five mix designs with varying levels of ASR reactivity. Jobe sand and sodium hydroxide pellets were added in various quantities to increase the reactivity of the prisms. Strain measurements of the prisms were taken according to ASTM C129 and the shear wave velocity of the prisms was measured using ASTM C215. These measurements were taken weekly, then monthly for over a year. It was determined that shear wave velocity of the prisms decrease linearly as strain in …

Bs News May/June

Building Services Engineering

No abstract provided.

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets Archive

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets Archive

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets Archive

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Implementing Online Updating To Complex Hysteresis Models In Real- Time Hybrid Simulation Using Constrained Unscented Kalman Filter, Bilal Ahmed Mohammed

Masters Theses

Although conventional experimental methods, such as quasi-static testing, shake table testing, etc., perform well to evaluate structural seismic performance necessary for modern seismic design, the quasi-static loading and/or reduced scale specimen used in shake table testing may not provide true dynamic responses of structural systems. To overcome these limitations, real-time hybrid simulation (RTHS) was developed, which is a combination of physical testing of the experimental substructure and analytical simulation of the numerical substructure. With the advancement of hybrid simulation, it is now possible to economically test large to full-scale specimens in laboratories at the real earthquake rate. Online model updating …

Impact-Resistant Behavior Of Reinforced Concrete Bridge Columns, Chen Fang

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The damage caused by a vehicle collision on a pier column can be catastrophic for the functionality of a bridge, even a total collapse of the bridge. ❖ A vehicle collision and a subsequent vehicle blast cause more damages on the bridge. ❖ Limited researches have been conducted to investigate the behavior of the bridge subjected to the combined effect of vehicle collision and blast. ❖ It is necessary to analyze the responses of the bridge under the vehicle collision and blast and provide some design suggestions to strengthen the bridge.

Conclusions ❖ The finite element models including column, pile …

Optimizing Steel Railway Truss Bridge Health Monitoring, Ahmed Rageh, Daniel Linzell

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Problems - Steel Railway Trusses • Aging • Large system – bridge AND railway • Labor intensive condition eval • Reported conditions: Stringer-to-floor beam connections [Haghani 2012] Stringer flange clip angle cracks [Haghani 2012] Unequal eyebars stress distribution [DelGrego 2008] Displaced eyebar pins [DelGrego 2008

Problems – Condition Evaluation • Visual inspection: Prescribed frequency Costly Subjected to human interpretation • Sensors: Focused on a single bridge Extensive array Costly

Hyperelastic Structural Fuses For Steel Buildings, Francys López

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Why to upgrade traditional systems?

The FEMA P-58-1 listed some of the limitations in present-generation procedures:

Questions regarding the accuracy and reliability of available analytical procedures in predicting actual building response.

“High” level of conservatism underlying the acceptance criteria.

Inability to reliably and economically apply performance-based procedures to the design of new buildings; and Lack of alternative ways of communicating performance to stakeholders that is more meaningful and useful for decision making purposes.

Performance based design (PBD) emerges as the methodology aiming to bridge this gap, raising the design level performance from life safety (traditional systems) to keep structures fully …

The Professional Constructor, Full Issue, Volume 42, Number 01

The Professional Constructor

No abstract provided.

Influence Of Skew And Nonlinear Deck On Elastic Versus Inelastic Distribution Behavior And Ultimate Capacity Of Steel Girder Bridges, Fayaz Sofi, Joshua Steelman

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Research Objectives

• Assessment of alternative load distribution methodologies for potential discrepancies that arise when evaluating distribution behavior of skewed steel girder bridges.

• Investigate the influence of skew and material nonlinearities (concrete cracking and steel yielding) on

• Load distribution behavior (elastic versus inelastic).

• System capacities (yielding and ultimate).

Summary and Conclusions • Influence of skew was examined on load distribution behavior, and nonlinear system-based capacities (yielding and ultimate) of composite steel girder bridges in presence of full material nonlinearities. In addition, assessment of two general definitions (beam-line and response fraction approaches) for quantifying load distribution behavior was …

An Empirical Analysis Of Air Force Military Construction Project Delivery Method Performance In The United States, Erich C. Kramer

Theses and Dissertations

The objective of this study is to investigate the performance of the design-bid-build and design-build project delivery methods in Air Force military construction (MILCON). Project delivery performance is measured through quantitative cost, schedule, and change order metrics for 264 design-bid-build and 316 design-build MILCON projects from 2003-2014. The average response measures were statistically compared within each delivery method using three independent variables: time, facility type, and major command (MAJCOM). The historical analysis revealed that the current working estimate programmed amount ratios improved over time for design-build projects, and an overall consistency in schedule growth and project duration performance occurred across …

The Impacts Of Climate Change And Anthropogenic Processes On Permafrost Soils And Usaf Infrastructure Within Northern Tier Bases, Alexander J. Graboski

Theses and Dissertations

The Department of Defense is planning over $552M in military construction on Eielson Air Force Base within the next three fiscal years. Although many studies have been conducted on permafrost and climate change, the future of our climate as well as any impacts on permafrost soils, remains unclear. This research focused on future climate predictions to determine likely scenarios for the United States Air Force’s Strategic Planners to consider. The most recent 2013 International Panel on Climate Change report predicts a 2.2ºC to 7.8ºC temperature rise in Arctic regions by the end of the 21st Century in the Representative Concentration …

United States Air Force Unaccompanied Housing Divestiture: An Economic Analysis, Dustin L. Gooden

Theses and Dissertations

The objective of this research is to determine potential cost savings associated with Air Force unaccompanied housing divestiture. This research uses Air Education and Training Command (AETC) installations as the data sample for the analysis, and will analyze the status quo, privatization, and identical FSRM options. With 16% of Air Force unaccompanied housing currently rated at various levels of inadequacy and the PRV for the inadequate housing at $2,315,773,149.00, the costs associated with renovating the inadequate unaccompanied housing is substantial. Moreover, the inadequacy of unaccompanied housing is part of the Air Force’s acceptance of risk in facilities and infrastructure to …

Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team

ECT Fact Sheets Archive

Fourth Quarter 2016

This is a quarterly report from the Purdue ECT.

Portable Signals: Indot Design Guidance And Specifications, Joseph Bruno

Purdue Road School

Until recently portable traffic signals, which are mounted on towable trailer supports, were not allowed in Indiana. However, portable signals have many advantages over fixed temporary signals, so the Indiana Manual on Uniform Traffic Control Devices was revised to allow them, and specifications for their use are now in place. This presentation provides an overview of portable signals, including INDOT’s current design and specification requirements for these devices.

Mash Implementation For Guardrail, Katherine Smutzer

Purdue Road School

A review of the Manual for Assessing Safety Hardware (MASH) Implementation for w-beam guardrail. What will change and what designers need to know when moving to MASH.

Construction Specifications And Special Provisions, Scott Trammell, Melissa Russell

Purdue Road School

The purpose of this presentation is to help project managers and designers prepare the necessary information required for their contracts with regard to the Standard Specifications and any necessary special provisions. Attendees will be exposed to examples of the right way to incorporate a Unique Special Provision, as well as things to avoid and questions to ask. It is important to know the proper way to write and present a Unique Special Provision.

Using Percent Complete Metric To Highlight The Root Causes Of Delays In Home Building Industry, Somik Ghosh

The Professional Constructor

Based on the prediction of US Housing and Urban Development (US HUD), the demand for new homes will increase in the coming months to accompany the steady sales of existing homes. To meet the future demand, the home building industry has to continuously improve and get rid of inherent problems such as frequent delays. While delays have been a common occurrence in the residential and commercial construction alike, investigations of delays in the residential sector has not received much attention. With the goal of exploring the causes of delays in the home building industry, a multiple case study approach was …

Are We On The Same Jobsite? The Millennial Generation Vs. Construction Industry Employees, Christine Piper, Varahee Madadi

The Professional Constructor

This paper gives an overview of a study conducted in a geographical area of the US to understand the millennial generation’s perception of the workplace of the construction industry. Many organizations face the challenge of integrating diverse generations in a workplace. With the retirement of a large number of Boomers and the current intake of Millennials in the workplace, organizations are facing a challenge to attract and retain the millennial generation. Workplace expectations of the millennial generation and employees are compared with the expectations of the workplace amongst different generations in the construction industry.

Math Skills That Don’T Add Up; A Comparison Between Eighth Grade And College Students, Nathan Barry, Angela Hollman, Dale Porter

The Professional Constructor

Among 34 participating countries within the Organization for Economic Cooperation and Development (OECD), the United States performed below average in mathematics earning a rank of 27. The World Economic Forum (2014) ranks the United States 51 out of 144 countries scoring a 4.4 out of 7 (7 = excellent) in the quality of mathematics and science education. Although the United States’ competitive advantage and economic growth is directly connected to science, technology, engineering, and math (STEM) careers, only 28 percent of those students choose to major with these fields in college. In addition, 48 percent of students that choose to …

6 Field-Observed Cracking Of Paired Lightweight And Normalweight Concrete Bridge Decks, Tara L. Cavalline, Jeremy T. Calamusa, Amy M. Kitts, Brett Q. Tempest

Engineering Technology Faculty Publications

Research has suggested that conventional lightweight concrete can offer durability advantages due to reduced cracking tendency. Although a number of publications exist providing the results of laboratory-based studies on the durability performance of lightweight concrete (with lightweight coarse aggregate) and internally cured concrete (using prewetted lightweight fine aggregate), far fewer field studies of durability performance of conventional lightweight concrete bridge decks in service have been performed. This study was commissioned to provide insight to a highway agency on whether enhanced durability performance, and therefore reduced maintenance and longer lifecycles, could be anticipated from existing lightweight concrete bridge decks that were …

Roman Catholic Elementary Photovoltaic Project, Joe Gugale

Construction Management

The use of photovoltaic panels in construction is rapidly growing all around the world. This paper summarizes the findings of a student-based project in Belize that was installed December 2016. The San Pedro Roman Catholic Primary School is the largest school on the island of Ambergris Caye, Belize with over 700 students in 22 classrooms ranging from Kindergarten to 8th grade. Although the school has power supplied from the local electrical utility, power outages occur frequently and the cost of electricity is considerable.

The project had several issues related to preparing the design, acquiring the materials and equipment, and developing …

A Laboratory Evaluation Of Warm Mix Technology For Use In Asphalt Rubber - Asphaltic Concrete Friction Courses: A Case Study Of Arizona, Michael Myung Jeong, Douglas I. Hanson

The Professional Constructor

The objective of this study was to determine if warm mix additives currently used in Arizona can be added for the production of an Asphalt Rubber - Asphaltic Concrete Friction Course (AR-ACFC) without detrimental effects on performance of the pavement. Three warm mix additives (Evotherm®, Sasobit®, and Advera®) approved by Arizona Department of Transportation were investigated through a laboratory study along with statistical analysis. Three major concerns on performance of an AR-ACFC considered in this study are asphalt draindown, durability, and moisture susceptibility. The laboratory binder test results show there is no clear evidence that the use of Evotherm and …

How U.S. Universities Intend To Meet Their Carbon Neutral Goals, Dennis C. Bausman, Avinash Venugopal

The Professional Constructor

Universities have been on the leading edge for implementation of sustainable practices, green building certification, and the push to limit emission of greenhouse gases. In 2006 leadership at twelve universities was instrumental in the creation of the American College & University Presidents’ Climate Commitment (ACUPCC). The two overall goals of the ACUPCC were to gain university commitment to eliminate greenhouse gas emissions from their campus operations and to promote sustainability education and research. A decade later there are over 650 that have officially pledged their support to the ACUPCC and in doing so have established a goal toward carbon neutrality …

Irish Bim Study 2017, Barry Mcauley, Alan Hore, Roger West

Articles

The Construction IT Alliance (CitA) recently published its Global BIM Study as part of its BIM Innovation Capability Programme (BICP). The study sought to identify how BIM was being currently addressed in 27 countries across the globe. The study sought to identify the presence of three key ingredients in these countries:

1. Regulatory requirement for BIM

2. Champions driving BIM

3. Noteworthy publications

The report identified a number of recurring themes that would help to shape Ireland’s BIM programme. The report concluded that Ireland should adopt a programme of partnership between industry and the Irish Government in order to affect …