Construction Engineering and Management Commons^™

Long-Term Asset Prioritization To Support District Planning, Melissa R. Sallberg

Theses and Dissertations

The United States Air Force (USAF) relies on its installations to project military power across the globe. However, due to the deferred infrastructure maintenance and recapitalization backlog of $33 billion as of 2019 (Wilson & Goldfein, 2019), it is more critical than ever for base-level community planners to focus their attention to the projects that will achieve each installation’s long-term goals. The recent incorporation of asset management principles into the USAF District Planning Process allows a unique opportunity to improve the existing scoring model for a holistic look at what matters to enterprise leaders and community planners making the plans …

Arctic Construction Under Climatological Constraints: A Decision Support System For Expeditionary Construction Site Selection In The Arctic Environment, Zachary S. Wontrop

Theses and Dissertations

The natural physical barriers present in the Arctic are being eroded by climate change, increasing near peer adversaries' abilities to exploit this region for strategic and economic gain. To maintain the Arctic as a region of strategic and economic international cooperation, increased infrastructure investment by the United States and its allies are required. No methodology currently exists to quantify construction-limiting climatological factors over time and space. Decision support systems can provide actionable information to guide decision makers during site selection. This research employs geographic, and time-coded historical climatology applied to a project case study, to develop a site selection decision …

Implications Of Good Faith In Construction Contracts, Nadine Rashed

Theses and Dissertations

The principle of good faith is making inroads and continues to significantly impact various contractual arrangements. In most civil legal systems, good faith is present as a core principle. Nevertheless, its definition is beyond doubt scarce in the construction industry. However, the common law lacks the good faith obligations. Good faith is one of the fundamental principles that impact the contractual obligations between the contracting parties. This paper creates an urge to address the implications of good faith on construction contracts in the pre-contract and post-contract award stages. Therefore, the paper’s objective is to propose a legal/contractual clause that meets …

Vr-Based Safety Training Program For High-Rise Building Construction, Sahar Badr

Theses and Dissertations

The rates of fatal and non-fatal accidents within the construction industry across the globe are surging despite the massive efforts that are being exerted toward maintaining a safe working environment. Past research has proved that the provision of effective safety training programs is a primary course of action that should be taken to minimize construction accidents, fatalities, and both fatal and nonfatal injuries.

However, in acknowledging the limitations of traditional safety training programs within the construction industry, several researchers have addressed the urge to incorporate novel training practices that are based on the modern virtual reality (VR) technology to promote …

An Artificial Intelligence Framework To Contractor Financial Prequalification, Salah Elgamal

Theses and Dissertations

Financial distress in the construction industry always causes major disruptions that

usually result in a rippling effect on the economy. Avoiding such defaults is a top priority for employers to meet their demands. Artificial Intelligence (AI) models have provided increased accuracy in predicting financial distress compared to statistical, fuzzy and logistic regression models, and other classification models. The main objective of this work is to support project employers in pre-qualifying contractors by predicting the status of construction contractors during a bid analysis to disqualify contractors with a high probability of experiencing financial distress during the project duration. Eight financial indicators …

An Artificial Intelligence Tool For The Selection Of Delay Analysis Technique In Construction, Mostafa Farouk

Theses and Dissertations

The increasing complexity and magnitude of projects impose greater impact of delays on stakeholders. Construction delays are a major source of disputes in construction projects. Since a construction project depends on interactions and shared responsibilities among parties, research works were directed toward identifying delay causes, quantifying their impacts, and proposing ways to deal with them. Several delay analysis techniques (DATs) are available, but when applied to the same project’s delays provide different results. Thus, the selection of the DAT to use in evaluating delays becomes vital. Reviewing the literature, it has been realized that often there are disagreements, which lead …

Optimization Of Contractor’S Cash Flow Based On Subcontractor’S Payment Management Plans, Helen Ghali

Theses and Dissertations

In many counties, the construction industry relies heavily on outsourcing packages to execute their projects and expand their businesses to fit in the diverse market. Such extensive integration of outsourced subcontractors is becoming an influential factor in contractors' cash flow management. Accordingly, subcontractors’ price selection and their respective payment plans are important phenomena and pivotal components for the well-being of the contractor’s cash flow. Cash flow management is considered one of the most critical areas analyzed by contractors when getting into a project. Contractor’s cash flow is built from a pool of interrelated information depending on subcontractors, suppliers trade credit …

Price Prediction Models Of Metals Considering International Crises, Haidy Ghali

Theses and Dissertations

Steel, copper, and aluminum are essential raw materials in the construction industry and are used in any construction project whether commercial, industrial, or mega projects. During normal market conditions, the prices of these metals normally fluctuate due to general inflation in the economy; however, during crises, the prices of these metals significantly fluctuate exposing both contractors and suppliers to an unexpected financial risk. Various researchers have developed metal prediction models for normal market condition and did not consider testing it on the crises time; also, the developed models are devised using past metal prices or macroeconomic indicators of trading countries …

Development And Prediction Of A Construction Price Index In Egypt, Mohamed Ramadan

Theses and Dissertations

Cost overrun is one of the most recurring issues in the Egyptian construction industry. The effect is not only on the construction industry ,but also influences the overall economy of a country like Egypt. Therefore, a construction performance index and a construction price index could be an integral indicator of the performance of the industry. These indices can reduce construction companies’ losses and decrease the effect of any sudden economic depression on the construction industry. Several research were conducted to predict construction indices. However, many uncertainties disturb the prediction of these indices. The trend in the prediction models for construction …

Using Naming Conventions To Facilitate Data Transfer Between Asset Management Systems And Building Information Models, John D. Foster

Theses and Dissertations

An improvement to the workflow developed by Loeh et al. (2021) is proposed using a Revit template with BUILDER SMS naming conventions when creating the Sustainable Facility Management-enhanced BIM Model. The method presented by Loeh et al. (2021) is modified by integrating BUILDER SMS parameters and naming conventions into the BIM model during, as opposed to after, the creation of the model. Four building models created in 2020-21, four from 2021-22, and one building from 2019 were used in this study. Two groups of students were used to evaluate the effect of the building-specific BIM templates. Evaluating the 2020 and …

Cost-Benefit Analysis Of The Saudi Land Bridge Project, Faris J. Alotaibi

Theses and Dissertations

Projects are the backbone of economic thrive of nations, especially infrastructure projects. It’s counted as the base layer of allowing economic trade between beneficiaries. Railway projects have always been a huge element in increasing trade operations between Saudi Arabia and the rest of the world, by providing an efficient and environmentally friendly way that is capable of hauling large loads of exports all the way to the seaports and from there to the rest of the world. The Saudi land bridge project will cost about $11 billion and will provide a new link between the existent railway in the eastern …

Evaluation Of Flood Damage On Cross Laminated Timber Wall Configurations, Mustafa Nezih Kaya

Theses and Dissertations

Greenhouse gas emissions are one of the critical factors that affect climate change, increasing flooding risk and threatening human life. The use of traditional construction materials is responsible for a higher percentage of global greenhouse gas emissions when compared to the use of sustainable materials in the construction industry. The substitution of current building materials with sustainable materials is essential to reduce greenhouse gas emissions and positively influence climate change when the current construction demand in the world is considered. Wood is one of the primary environmentally friendly construction materials in regard to high carbon storage and low carbon emissions. …

Legal Characterization Of The Challenges Faced By The Construction Industry During Covid-19 And Devaluation Of The Egyptian Pound, Riham Abuzaid

Theses and Dissertations

With all the challenges this past decade has inflicted on the economy on a global scale, Egypt had its share with two major events, starting with the Egyptian pound devaluation against the U.S dollar in 2016 and currently the emergence of the COVID-19 pandemic. These major events instigated the interference of the legal/contractual sectors in the construction market to find solutions that range from agreeable to stringent to protect the assets of their beneficiaries.

Both events are impactful and require extensive analysis to determine and classify each situation. This thesis addresses the implementation of standard internationally acknowledged legislative acts used …

Quantifying Responsiveness In The Vaccine Industry To Evaluate And Improve Pandemic Response, Connor Hill

Theses and Dissertations

In the wake of the pandemic Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) we can look at many aspects of the global response, including social, scientific, and governmental. Current research in the areas of vaccine development and manufacturing find the process of developing a new vaccine takes an especially long time and is unresponsive. Understanding the factors that influence responsiveness can help organizations be better prepared to address the needs of society should another pandemic strike. Responsiveness can be linked to product, process, and volume. The vaccine development and manufacturing process historically takes years to reach distribution for public use. …

Investigation Into Engineering Change Order Costs And Appropriate Rules-Of-Thumb, Kaiana M. Miller

Theses and Dissertations

Engineering Change Orders (ECO) are technical requirements changes to existing contracts. To account for the potential increase in contract costs stemming from ECOs, current acquisition practice is to estimate a dollar value to hold in management reserve (MR) in case of ECO occurrence. Estimators often rely on rules-of-thumb when developing these estimates. Specifically, estimators use a 10% rule-of-thumb for estimating MR contract costs in the Development life cycle phase and a 5% rule-of-thumb for contracts in the Production or O&S life cycle phase. However, no empirical data supports or validates these 10% and 5% figures. Using a new data source, …

Critical Evaluation Of Construction Industry-Related Additive Manufacturing Research: A Scientometric Analysis, Tyler J. Brunjes

Theses and Dissertations

Review of construction-related AM literature is used to identify the advantages, challenges, and current trends of the research. Using a scientometric analysis of 522 bibliographic records, this research systematically analyzed construction related AM research to determine the key research areas and trends. Results showed that starting in 2015, the field has been growing at an exponential rate. Recent AM research focused on materials and reinforcement topics, which matched the most notable challenges of AM, which are material rheology, reinforcement, and lacking construction standards. This study provides an insight into AM research and identifies areas requiring more innovation before its commercial …

Quantifying Project Complexity To Resource Project Managers, Jereme R. Henrard

Theses and Dissertations

This research develops a multi-criteria decision analysis model to quantify project complexity and inform decision-makers in resource-constrained organizations with the Tyndall Program Management Office (PMO) as a case study. The complexity score is used as a risk metric to determine the appropriate number of skilled or novice project managers to effectively manage the PMO portfolio to mitigate cost and schedule overruns. The research provides an innovative approach to consider manning levels at the PMO and other project management-focused organizations/sections.

A United States Air Force Site Selection Methodology In A Contested Agile Combat Employment Environment, Zachary T. Moer

Theses and Dissertations

The United States Air Force’s (USAF) Agile Combat Employment (ACE) strategy relies on host country access and underlying local infrastructure to facilitate airpower. However, numerous factors, including peer-to-peer threats, complex geopolitics, and intricate supply chain management, often complicate site access and thwart site selection decisions. When shaping the battlespace for future conflict, strategists and planners face the difficult task of identifying optimal locations to conduct adaptive basing operations given these complicating factors. Multi-Criteria Decision Analysis (MCDA) can help strategists appropriately account for competing objectives and maintain a competitive advantage with theater adversaries. This thesis presents an MCDA model that evaluates …

Mathematical Modeling And Optimization Of Water Efficiency In Residential Buildings, Mahmoud Amin

Theses and Dissertations

Water scarcity is a global issue that is rapidly worsening. The domestic sector is one of the fastest-growing segments of world water usage. Many researchers have explored various approaches to promote sustainable uses of water, with Greywater (GW) recycling and utilization of innovative plumbing fixtures among the methods presented to reduce freshwater consumption for domestic usage. Nonetheless, previous studies have dealt with both means independently, with limited analysis of the integrated effect of utilizing GW recycling with innovative plumbing fixtures, both on quality of supplied water, as well as on cost of the integrated system. Accordingly, this research aims at …

Final Bid Price Estimation For Negotiated Contracts: Bargaining Game Theory Approach, Amr El Mahallaoui

Theses and Dissertations

The wide use of the low bid method by employers for awarding construction contracts has created an aggressively competitive environment among contractors in the construction industry. As a result, a contractor may resort to use a low mark-up percentage for his bid to increase his chances of winning, which may lead to losses and conflicts in case he is awarded the project. Additionally, a contractor who reaches the final negotiations stage for a certain project is faced by the dilemma of the minimum discount percentage he may need to offer to the employer that maximizes his chance to win the …

Rework Prediction On A Construction Site Through Bim & Ann Integration, Raghda Attia

Theses and Dissertations

Construction Rework is a common and widespread issue in the construction industry that has a detrimental impact on the project performance, whether in terms of schedule delay or cost overrun. Developments in Building Information Modelling (BIM) have aided in the resolution of coordination issues, which are thought to be one of the leading sources of rework particularly during the construction stage. Nevertheless, the majority of research has focused on resolving coordination issues during the design stage with minimum regard to the coordination issues that occur during the construction stage. In a BIM environment, the goal of this research is to …

A Quality Management System Implementation Framework For Contracting Companies In Egypt, Noha Elsokhn

Theses and Dissertations

Customer dissatisfaction due to low quality and performance in developing countries is more notable than technical construction failures. In order to enhance the corporate-level quality, which is reflected later in project-level metrics, quality management systems (QMS) are developed and applied. A quality management system (QMS) defines the organization's structure, processes, procedures, and responsibilities to achieve quality policies and objectives. Successful implementation of a QMS improves service quality, organization performance, and customer satisfaction. Previous research widely explored QMS implementation in different industries; only a few studies focused on the implementation and its influential factors in the construction industry, especially in developing …

Project Leanness Score: A Machine Learning Approach, Julia Said

Theses and Dissertations

The construction industry is known to have several inadequacies in resource utilization leading to cost and schedule overruns. One of the popular recent methods that attempts to eliminate these inadequacies is lean construction principles, techniques and tools. Lean construction is a philosophy, backed with principles and tools, aiming at maximizing value, eliminating waste, optimizing efficiency, and seeking continuous improvement. Lean construction techniques (such as pull planning, just-in-time delivery, fail safe for quality, etc.) are widely researched and well developed. However, their implementation in construction sites is tricky as their success depends on several other factors such as the level of …

Framework For Enhanced Applicability Of The Egyptian Public Procurement Law To International Administrative Construction Contracts, Amr Abu Helw

Theses and Dissertations

Local governments and public authorities conclude contracts for the purpose of acquisition of goods, delivery of services and construction of public facilities like bridges, infrastructures and public buildings. A public contract is an agreement to perform particular tasks financed by government funds to the benefit of the whole community. Private entities and corporations are subject to stricter standards in their dealings with the government than in private transactions. Conversely, the government must deal fairly and equitably with those who it contracted with to achieve successful implementation of the projects. On October 3, 2018, a new Egyptian public procurement law, namely, …

Effects Of Bonding Pressure And Lamina Thickness On Mechanical Properties Of Clt Composed Of Southern Yellow Pine, Cody S. Bates

Theses and Dissertations

This study produced cross-laminated timber panels at a range of four lamina thickness (5/8, 1, 1 1/8, and 1 1/4 inch) and three bonding pressures (50, 125, 200 psi), producing a total of 12 panels for mechanical testing. The goal of this study is to observe how the thickness and pressure trends affect the mechanical properties of CLT. Tests include flatwise bending, flatwise shear, internal-bond, and delamination. Results showed that bending MOE decreases as the panel thickness increases while bonding pressure had no significance. Bending MOR was less significant for the thickness and more significant for pressure compared to the …

Assessment Of Key Imperatives For Enhancing Precast Adoptability In Egypt, Mostafa Sameh

Theses and Dissertations

Precast Concrete’s modular application concept is a major construction method that has been used historically seen in various shapes, forms, and with a wide range of constituents. Examples include Ancient Egypt and China among several impressive structures in old civilizations. The major advantages of precast concrete lie in its adaptability, resilience, and versatility which makes precast concrete one of the most agile building materials. Precast concrete as we know it today has been introduced to our markets over the past several decades. Having similar advantages to that of old precast building methods, the road has been paved for wider use …

Assessment Of Carbon Dioxide Emission And Its Impact On High-Rise Mixed-Use Buildings In Egypt, Ahmed Salah Hamza

Theses and Dissertations

With Egypt's vision of 2030 focusing on sustainable development with a true emphasis on Carbon Dioxide (CO₂) emission reduction in the newly built cities and high-rise buildings, efforts are exerted on various levels towards accomplishing the vision’s goals. This is achieved through multiple tools and models associated with aiding the reduction of carbon emissions, yet not a clear one was introduced for the mixed-use buildings in Egypt.

Through this work, a significant gap was identified with respect to high-rise buildings carbon emission assessment in Egypt. This was a main driving force for this work in an attempt to …

Interactive Expert System For Budgeting World Bank Consultancy Projects, Yosra Rafat

Theses and Dissertations

Cost estimating and forecasting are key components of the budgeting of any construction project. However, conventional approaches may result in uncertainty and usually do not utilize the organizational knowledge of past projects. Ideally, performing a cost estimation under the best predictions of the relevant future conditions, is the best approach of economic analysis to evaluate the optimum value for money. With the rise of Artificial Intelligence techniques, there are now several Machine Learning (ML) methods that are being studied to capitalize on accuracy gains with regards to cost estimating techniques to increase reliability during the tendering phase. This research aims …

Assessment Of Contract Terms And Conditions For Lump-Sum Contracts, Omar Othman

Theses and Dissertations

A Contract is a tool that defines the obligations of the contracting parties and assigns the risk between them. Contracts are usually drafted to meet the interests of the owner by addressing the legal issues and liabilities. Meanwhile, less emphasis is placed on clearly communicating the contract terms and ensuring that all contracting parties comprehend their risks and obligations. In a country like Egypt, which has faced drastic economic and political changes in the past few years, and yet is experiencing a boom in the construction sector, many developers tend to draft contracts that might be legally complicated or lacks …

Developing A Cost Of Delay (Cod) Framework For The Dod & Analyzing The Current State Of Air Force Agile Cost Estimation, James Goljan

Theses and Dissertations

The study has two research objectives. The first research objective develops a proof of concept for a Cost of Delay (CoD) framework to evaluate the Air Forces Kessel Run Software Factory. CoD provides a means to justify and prioritize competing interests regarding budgetary, manpower, and overall strategic decisions. DoD organizations can employ a cost minimization framework to conduct CoD Analysis. The results demonstrate Software Factories eschew trends in the literature towards more complicated cost models that incorporate machine learning with Data-Based techniques in lieu of simpler models that utilize Engineering Build-up Capacity Based techniques.