Construction Engineering and Management Commons^™

Automated Manipulation For The Lotus Filament Winding Process, Jeffrey V. Anderson

Theses and Dissertations

The filament-winding process produces quality consistent composite parts for many industries. Filament winding allows for consistent quality parts by automating the winding process. A recent development of filament winding is the Lotus process. The Lotus process reverses conventional filament winding by leaving the mandrel stationary and winding composite fiber around the mandrel. The automated Lotus filament-winding machine is controlled by four-axis control manipulating the Lotus ring around a fixed mandrel. This allows Lotus filament winding to wind parts that do not have a linear axis. Lotus filament winding is in its early stages of development. As a second step in …

A Decision Model For Choosing Among Photovoltaic Technologies To Generate Electricity At Grid-Connected Air Force Facilities: A Value-Focused Approach, Mostyn O. Kellner

Theses and Dissertations

The United States is currently consuming fossil fuels faster than natural processes can replace them. Our nation's leaders recognize that a diverse energy portfolio including renewable energy is the key to maintaining our economy, security, and the environment. The federal government is by far the greatest energy consumer; thus, our nation's leaders have directed federal agencies to strive to increase the use of renewable energy at federal facilities. Solar electricity technologies, in the form of photovoltaics, have great potential in the renewable energy mix. Although a major strategy should be integrating photovoltaics into the design of new facilities, an important …

Estimating Required Contingency Funds For Construction Projects Using Multiple Linear Regression, Jason J. Cook

Theses and Dissertations

Cost overruns are a critical problem for construction projects. The common practice for dealing with cost overruns is the assignment of an arbitrary flat percentage of the construction budget as a contingency fund. This research seeks to identify significant factors that may influence, or serve as indicators of, potential cost overruns. The study uses data on 243 construction projects over a full range of project types and scopes gathered from an existing United States Air Force construction database. The author uses multiple linear regression to analyze the data and compares the proposed model to the common practice of assigning contingency …

Correlating Factors Between Student Participation And Student Learning Via A Service Learning Project In Secondary Education: A Case Study, Shawn V. Jensen

Theses and Dissertations

In this study a service-learning project was conducted with secondary students in a construction technology based course. Three research questions were considered; (1) does service learning projects help to engage student participation, (2) can students learn the course curriculum while participating in a service learning project, and (3) is there a correlation between student participation and student learning as it pertains to service learning projects? The data was collected through surveys, observations, interviews, and evaluations. The researcher concluded the following from the study; 92% of the students were actively participating in the two week service project, 76% of the students …

An Investigation Of Employee Satisfaction And Employee Empowerment Specific To On-Site Supervisors In The Residential Construction Industry, David Lars Halvorsen

Theses and Dissertations

Employee satisfaction and empowerment are vital elements to businesses in most industries. The construction industry has various types of employees, ranging from managers and executives to on-site supervisors and laborers. This study was conducted to obtain a greater understanding about the elements and levels of satisfaction and empowerment of on-site supervisors in the residential construction industry. An on-site supervisor in the residential construction industry is responsible for coordinating and managing employees, materials, equipment, budgets, schedules, contracts, and the safety of employees and the general public. They are also the employees most frequently perceived as accountable for the success or failure …

A Gasless Method Of Spraying Thermoplastic Resin, Dan T. Rogers

Theses and Dissertations

This spraying method for thermoplastic resins is a new manufacturing process for applying thermoplastics to a mold or surface in an efficient way that has the potential of reducing cycle time. Spraying thermoplastic resins is similar to spraying other polymers, such as paint, with the differences being higher pressure and temperature. This method uses an injection molding machine with a modified nozzle to spray the plastic material. In this study, temperature, pressure, and nozzle size were factors that influenced the success of this spraying method. The method of spraying in this study proved spraying without a gas is possible, a …

Development Of Commercial Applications For Recycled Plastics Using Finite Element Analysis, Nanjunda Narasimhamurthy

Theses and Dissertations

This thesis investigates the suitability of thermo-kinetically recycled plastics for use in commercial product applications using finite element analysis and statistics. Different recycled material blends were tested and evaluated for their use in commercial product applications. There are six different blends of thermo-kinetically recycled plastics used for testing and CATIA is used for finite element analysis. The different types of thermo-kinetically recycled plastics blends are: pop bottles made of PolyethyleneTeraphthalate (PET), milk jugs made of High-Density Polyethylene (HDPE), Vinyl seats made of Poly Vinyl Chloride (PVC) and small amount of Polypropylene (PP) and Urethane, electronic scrap made of engineering resins …

Assessing Construction Management Higher Education Strategies: Increased Demand, Limited Resources, And Over-Enrollment, Kristen Lea Wynn

Theses and Dissertations

The purpose of this research was to see how Baccalaureate Construction Management Programs accredited by the American Council for Construction Education (ACCE) were managing increased enrollments within their programs. The review of literature identified related topics, comparable studies, and relevant issues surrounding over-enrollment. Forty-nine of the 53 accredited ACCE programs responded to the survey instrument. Over two-thirds of the respondents stated that they were either approaching, or were at the limits of enrollment capacities. Most of the respondents listed limited enrollment, the use of adjunct faculty, and funding from industry as leading strategies for managing or obtaining resources. Because CM …

Establishing Public Confidence In The Viability Of Fingerprint Biometric Technology, Nathan Alan Green

Theses and Dissertations

The most common personal authentication techniques used for identity management employ a secret PIN or password that must be remembered. The challenge, for a given user, is that a multitude of such codes must be recalled over the course of the day for transactions involving distinct computer applications. Password mania prevails. Fingerprint biometric technology is an ideal alternate solution to this password recall problem. In spite of their availability for nearly thirty years, fingerprint biometric systems still remain uncommon in public sectors of industry such as education, government, and technology. Technology has improved sufficiently that false acceptance and rejection rates …

Integrating Value Stream Mapping And Simulation, Michelle E. Scullin

Theses and Dissertations

An important principle in Lean manufacturing, value stream mapping (VSM) can be helpful in understanding how process flow and information flow affect each other. A VSM is a static picture of a process that allows the user to see where value is added into the value stream. Simulation is used to evaluate the behavioral issues of processes. In a manufacturing realm this means simulation shows how each operation affects other operations so determinations can be made about where bottlenecks or other problems exist in the process. Theoretically, the integration of VSM and Simulation can aide in process improvement by showing …

Determination Of Wall Thickness And Height When Cutting Various Materials With Wire Electric Discharge Machining Processes, Sangseop Kim

Theses and Dissertations

This thesis looks at the capabilities of cutting thin webs on Wire EDM machines that are difficult or impossible to machine using conventional methods. Covered is an investigation of how different material and web thickness affect the capability of machining thin-walled parts.

Five different metals are used for the test; Aluminum 6061 T6, Yellow Brass SS360, 420 Stainless Steel, D2 unheat-treated tool steel 25-30 RC, and D2 heat-treated tool steel 60-65 RC. The small parts were cut to a 6mm (0.2362 inch) height with six different wall thicknesses: 0.30mm (0.0118 inch), 0.25mm (0.0098 inch), 0.20mm (0.0078 inch), 0.15mm (0.0059 inch), …

A Tool Wear Comparative Study In Turning Versus Computer Simulation In 1018 Steel, Woodrow D. Miner

Theses and Dissertations

The material removal process uses cutting tools in order to produce the desired shape of the workpiece. Tool wear has been a problem for cutting tools, since cutting tools wear and break. Research has been accomplished in the tool wear field for tool life and more recently tool wear. The computer generation has created a method to simulate the material removal process. These computer simulations model the cutting tool reaction with the workpiece. Many of the simulation models use finite element analysis to calculate the reaction of the cutting tool. Different finite element models are being used throughout the world …

The Purposes And Evaluation Methods For State Residential General Contractor Licensing, James Ellis Fenn

Theses and Dissertations

The main topic in the licensing debate is whether licensing affects construction quality. Available literature and previous studies indicate that it does not. The real question is not whether licensing improves quality, but whether the improving quality is the actual purpose of licensing. There is little information available on the purpose of licensing as defined by state licensing departments as well as a general lack of information on how states evaluate whether licensing is fulfilling the intended purpose. In order to effectively resolve some of the issues surrounding the construction licensing debate, the true purpose of licensing and the methods …

Estimating Performance Time For Air Force Military Construction Projects, Greg J. Hoffman

Theses and Dissertations

The prediction of construction time performance is a problem of interest to both researchers and construction industry practitioners. This research seeks to identify significant factors which may influence construction durations for Air Force Military Construction (MILCON) projects to establish a time prediction model. Data were collected for 856 MILCON projects completed between 1988 and 2004; this included both traditional facility and non-facility (e.g. airfield pavements, utilities) projects. These data were analyzed using Bromilow's time-cost (BTC) model (1969) as well as multiple linear regression. Neither model produced acceptable results for non-facility projects; however, the multiple linear regression model was found to …

An Evaluation Of Contingency Construction Methods Using Value Focused Thinking, John E. Tyron

Theses and Dissertations

Rapid Engineering Deployable, Heavy Operational Repair Squadron, Engineer (RED HORSE) Squadrons are 400-person, self-contained, combat engineer units that provide deployable and flexible expert construction capability for the United States Air Force. To help meet Air Force mission requirements, RED HORSE units currently employ a variety of traditional and innovative construction methods. But their alternatives-focused decision analysis approach to method selection limits their decision to known alternatives and may not fully achieve all of their objectives. This research developed a generic value-focused thinking (VFT) decision analysis model to help RED HORSE evaluate and select contingency construction methods. Eight alternatives were generated …

Computer-Simulation-Assisted Lean Manufacturing Training, Luoding Wang

Theses and Dissertations

This thesis assesses the potential of using computer simulation to aid existing lean manufacturing training methods such as lecture and live simulation. An investigation of this possibility was carried out in conjunction with UMEP's Lean 101 class. In the study, two experimental computer simulation models demonstrating the push and pull production scenarios were constructed using ProModel software. Simulation models were equipped with a Visual Basic interface to aid trainees to manipulate the model via ActiveX. Constructed computer simulation was compared with live simulation to answer these research questions: 1. Was computer simulation able to teach additional lean concepts not covered …

New Product Launch Decisions Under Competition And Uncertainty: A Real Options And Game-Theoretic Approach To New Product Development, James O. Ostler

Theses and Dissertations

New product development is central to many firms' future success. Not only as a means to continue to maintain their piece of the market, but product development can also be a strategic means for a company to diversify, and/or alter focus to adapt to changing market conditions.

Most of the research in new product development has been on how to do it cheaper and faster than the next guy. However, early commercialization does not guarantee a position of strength in the market. Failures of EMI in CT scanners and Xerox in personal computers illustrate that being first to market does …

A Finite Element Simulation Of Temperature And Material Flow In Fricton Stir Welding, Mark J. Lasley

Theses and Dissertations

The purpose of this research was to use the Transvalor S.A. product, Forge3, to develop a finite element simulation of the friction stir welding process that improves the predictability of temperature evolution and material flow within the plunge portion of the process. Previous modeling created more heating within the billet than experimental results, probably due to the simplification of the simulation with adiabatic boundary conditions. More realistic tooling temperatures were included in this model as these affect heat evolution which is a determining factor in microcrystalline growth. These results were validated by experimental efforts using a billet and tooling instrumented …

A Method For Winding Advanced Composites Of Unconventional Shapes Using Continuous And Aligned Fibers, Abraham K. Allen

Theses and Dissertations

Advanced composites are extremely strong, rigid, and light, even when compared with advanced metals. Advanced composites are replacing high-tech metals as the material of choice for aerospace engineering. However, the processes used to manufacture advanced composites generally lose some of the properties of the materials by their process limitations.

One process that keeps the theoretically awesome qualities of the composite materials in tact is filament winding. Filament wound parts are used as rocket shells, bicycle frame tubes, drive shafts, pressure vessels, etc. Filament winding is an automated process and makes reliable parts to close tolerances. If a straight tube were …

The Effectiveness Of Computer-Based Tutorials In Learning Computer-Aided Design Methods For Tool Design Procedures, Andrew Moroni Hall

Theses and Dissertations

Throughout the past twenty-five years the process of designing and manufacturing a product has been revolutionized by the integration of Computer Aided Design (CAD). Although three-dimensional solid modeling, or 3-D CAD offers a better representation of the product in a virtual environment, it can be complicated and difficult to learn. Tutorials have been developed to assist manufacturing tool design student in the learning of 3-D CAD principles as they apply to tool design. This study seeks to test the effectiveness of those tutorials. A BYU tool design class was divided into two groups according to their assigned laboratory time. The …

Improved Signal Integrity In Ieee 1149.1 Boundary Scan Designs, Efren De Jesus Rangel Taboada

Theses and Dissertations

This work is an analysis of solutions to problems derived from inherent timing and signal integrity issues in the use and application of the IEEE 1149.1 Standard at the board level in conjunction with its test system. Setup or hold times violations may occur in a boundary scan chain using IEEE 1149.1 compliant devices. A practical study of the TDI-TDO scan data path has been conducted to show where problems may arise in relationship to a particular board topology and test system. This work points to differences between passing and failing scan path tests for problem characterization. Serial data flow …

The Benefit Of Using Simulation To Improve The Implementation Of Lean Manufacturing Case Study: Quick Changeovers To Allow Level Loading Of The Assembly Line, Jack J. Mcclellan

Theses and Dissertations

In today's competitive manufacturing environment, companies are constantly looking for ways to improve. Because of this, many companies are striving to become "lean" by implementing lean manufacturing, which is a difficult process. To aid in the implementation of lean manufacturing, simulation was used to reduce the trial-and-error period of lean manufacturing and find to optimum approach to implement the lean manufacturing principle. In this research, a case study of implementing level loading of the production schedule for BullFrog International, L.C. will be examined. To make it possible to implement level loading, the thermo-former machine at the beginning of the operations …

A Review Of Setup Practices And Procedures For Creating Ieee 802.11 Wireless Community Networks, Jae M. Theobald

Theses and Dissertations

IEEE 802.11 wireless networking equipment has made it possible to bridge the last mile for new broadband internet service providers. Inexpensive wireless networking equipment and high gain antennas enable high speed internet delivery at a fraction of the cost of installing or upgrading land lines for cable or DSL services. Based on this research, a guide of general practices and procedures is proposed for designing, installing, and maintaining a reliable wireless community area network. Included tests have provided performance results for several types of wireless antennas (including wire grid parabolic dishes, Yagi and Vagi styles, and echo backfire), wireless bridges, …

The Contextable: Building And Testing An Intelligent, Context-Aware Kitchen Table, Daniel Matthew Hoopes

Theses and Dissertations

The purpose of this thesis was to design and evaluate The ContexTable, a context-aware system built into a kitchen table. After establishing the current status of the field of context-aware systems and the hurdles and problems being faced, a functioning prototype system was designed and built. The prototype makes it possible to explore established, untested theory and novel solutions to problems faced in the field.

A Descriptive Performance Model Of Small, Low Cost, Diskless Beowulf Clusters, Curtis R. Nielson

Theses and Dissertations

Commodity supercomputing clusters known as Beowulf clusters, have become a low cost alternative to traditional supercomputers. Beowulf clusters combine inexpensive computers and specialized software to achieve supercomputing power. The processing nodes in a diskless Beowulf cluster do not have a local hard disk unlike the nodes in most commodity clusters. Research has provided performance information for diskless clusters built with expensive, high performance equipment. Beowulf clusters use commodity off-the-shell hardware, and little information is available about their performance. This research includes the construction of several diskless Beowulf clusters. Using the NAS Parallel Benchmarks, the performance of these clusters was measured. …

A Proposed Military Construction Facility Investment Model, Andre R. Dempsey

Theses and Dissertations

The fiscal year (FY) 1999 and FY2000 National Defense Authorization Acts (NDAA) amended Title 10 USC, Section 17, and directed the secretary of defense to report annually on the capability of installations and facilities to provide support to forces in the conduct of their missions. This has come to be known as the Installations' Readiness Report (IRR). The Air Force's IRR links facility sustainment, restoration, and modernization (SRM) requirements, with the impact on the installation's ability to support the mission associated with the particular facility class. The Air Force's centralized military construction (MILCON) program model used to program major facility …

Estimating Engineering Cost Risk Using Logistic And Multiple Regression, Vincent P. Sipple

Theses and Dissertations

This study explores a two-step procedure for assessing defense acquisition program cost growth using historical data. Specifically, we seek to predict whether a program will experience cost growth and, if applicable, how much costs will increase. We compile programmatic data from the Selected Acquisition Reports (SARs) between 1990 and 2000 for programs from all defense departments. We focus our analysis on cost growth in research and development dollars for the Engineering Manufacturing Development phase of acquisition. We further limit our study to only one of the seven SAR categories of cost growth engineering cost growth. We explore the use of …

Life-Cycle Cost Analysis: A Computer Aided Tool For The Egyptian Construction Industry, Ahmed Mohamed Ahmed Ibrahim

Theses and Dissertations

The construction industry can be considered as an indication of economical status of any country.

Cost Analysis Between Saber And Design Bid Build Construction, Elwood Henry

Theses and Dissertations

The purpose of this research was to perform a cost analysis between DBB and SABER construction. The research involved traveling to Wright-Patterson and Holloman Air Force Bases to gather project information on comparable projects completed by both methods. There were a total of 46 projects collected from both bases. A methodology was developed to compare the projects completed. Projects were divided into categories containing similar types of construction. Data from the project was then used to calculate a unit cost for the project. Project comparability was demonstrated by showing the projects constructed by each method completed a similar type and …

Individual Housing Choices Among Air Force Members, Michael J. Johnson

Theses and Dissertations

Air Force members have three different housing choices: live in MFH, rent in the local community, or buy a house in the local community. A set of six constructs (Housing Attributes, Safety, Pet Importance, Location, Military Housing Perception, and Community) that encompass members' considerations is developed and analyzed. The data was extracted from a survey that was specifically designed to illicit the relative importance of each construct during the housing decision making process. Each construct was measured using a Likert scale score. Statistical analysis was performed to determine the overall Likert mean score for each construct. Using the Likert mean …