Construction Engineering and Management Commons^™

Corrosion Of Steel In Concrete And Its Prevention In Aggressive Chloride-Bearing Environments, Luca Bertolini, Maddalena Carsana, Matteo Gastaldi, Federica Lollini, Elena Redaelli

International Conference on Durability of Concrete Structures

This keynote paper deals with the durability of reinforced concrete (RC) structures exposed to aggressive environments characterized by high concentration of chloride ions, namely, marine environments or the use of de-icing salts. The mechanism of chloride-induced corrosion of steel in concrete is introduced, and its influence on the service life of RC structures is analyzed. Factors affecting the time to corrosion initiation are described with regard to both concrete properties and environmental exposure conditions. Design approaches available for achieving durability targets associated with the design service life are analyzed, focusing on studies carried out by the authors in recent years …

Storm Damage - Sr-57 June 2008, Dale Sedler, Mark Bailey

Purdue Road School

A review of the impact of the White River leaving its watershed and destroying a box culvert under SR-57 in Greene County, IN. Includes discussion about impact of illegal levee, and photos and discussion on contraction scour.

Storm Damage - Murphy's Law, Dale Sedler, Mark Bailey

Purdue Road School

Examination of a disastrous event that required 4 coinciding occurrences happening that individually would likely have resulted in minor or no damage.

Storm Damage - Floating Culverts, Dale Sedler, Mark Bailey

Purdue Road School

A review of buoyancy issues culverts experience due to blockage. Includes discussion of blockage due to floating debris and issues with multiple culverts. Provides information on characteristics that help to determine if a culvert has "floated."

Vertical Icf Wall System, Purdue Ect Team

ECT Fact Sheets Archive

Traditional ICF systems’ installation is tedious and labor intensive resulting in out of level, bowing, and snaking walls with a significant amount of bracing adding to the cost. ICF (Insulated Concrete Form) walls are a form of structural walls used for construction. Hobbs Vertical ICF system uses less concrete, more recycled material and requires less labor for construction. The furring assemblies and retainer clips of the Hobbs VICF system are made from 100% recycled post-industrial waste.

Prefabricated Building, Purdue Ect Team

ECT Fact Sheets Archive

With the continuous demand for construction of new buildings, an easier, more sustainable, energy-efficient and environmentally friendly building method is necessary to save time, energy and cost. Hence, there has been an increasing need for a system such as BROAD sustainable building (BSB). A form of prefabricated building by BROAD Sustainable Building Co., LTD (BSB). It consists of flooring and ceiling, embedded shafts of ventilation, water supply & drainage, electricity and lighting. Other items include pillars, diagonal bracings, doors, windows, walls and sanitary wares, air conditioning, air quality products, lifts, building thermal insulations.

Post-Tensioned Concrete Shear Wall, Purdue Ect Team

ECT Fact Sheets Archive

The post-tension concrete shear wall by Tipping Mar will replace the conventional concrete shear wall in earthquake prone areas in many instances, depending on the height and scale of the building.

Rapid Drying Concrete, Purdue Ect Team

ECT Fact Sheets Archive

One of the essential problems that are faced during construction is the drying of concrete and the presence of moisture which affects floor coverings that need to be placed. The rapid-drying characteristic in Aridusâ concrete allows for the quick reduction of moisture vapor that travels through the concrete pores of the concrete.

Ap Alternatives Modular Solar Racking, Purdue Ect Team

ECT Fact Sheets Archive

Solar panels have been used to generate and supply electricity in various applications such as residential and commercial buildings. Therefore, a need for a quicker approach to installation as well as the need to reduce workmanship to speed up the process is needed. Solar racks are developed through the use of automated equipment to “preassemble the racking hardware, pre-install the solar modules, and drive helical anchors into the ground rapidly”. So instead of installing one panel at a time, AP Alternatives has created a new method that uses machines to make the process easier. This new automation of the installation …

3d Printing For Bricks, Purdue Ect Team

ECT Fact Sheets Archive

Building Bytes, by Brian Peters, is a project that uses desktop 3D printers to print bricks for architecture. Instead of using an expensive custom-made printer, it uses a normal standard 3D printer which is available for everyone and makes it more accessible and also easier for fabrication.

Influence Of Warping On Stress For Restrained Concrete Slabs: For Application To Crcp, Corey M. Beck, W. Jason Weiss, Nathan T. Todd

The Summer Undergraduate Research Fellowship (SURF) Symposium

Continuously-reinforced concrete pavement (CRCP) is widely used in transportation system because of its low maintenance requirement. However, the need for large volumes of steel creates a high cost for new construction. The Illinois Tollway is preparing to substantially renovate highways in and around Chicago and this work seeks to understand how concretes of varying mixture designs can be made thinner by reducing the amount of built-in stress. The experiment examines warping in beams subjected to various degrees of restraint, in an effort to assess effectiveness at reducing warping in continuously reinforced concrete pavements. Value added methodologies such as internal curing …

Simplified Pavement Design For Lpas: Introduction To Pavexpress, Dudley Bonte

Purdue Road School

Simplified Pavement Design for LPA's; An introduction to and use of PaveXpress, a simplified, free, web-based pavement design scoping tool for roadway and parking lot pavements. The system was developed by Pavia Systems in partnership with the National Asphalt Pavement Association. PaveXpress creates technical sound pavement structural designs for flexible and rigid pavements based on widely accepted industry standards from the Association of State Highway Officials (AASHTO). The simplified pavement design system is based on empirical equation from the 1993 AASHTO Guide for the Design of Pavement Structures. PaveXpress is intended for use by local agencies, engineers and consultants …

Development Of Improved Electrodeposition Method For Repair Of Reinforced Concrete Structures, Takahiro Nishida, Nobuaki Otsuki, Atsushi Saito

International Conference on Durability of Concrete Structures

Deterioration of reinforced concrete members and their repair methods have been reported in various concrete published reports. Electrodeposition method is one of these repair methods for repairing deteriorated concrete members using an electrochemical mechanism. The purposes of the electrodeposition method are to fill cracks in concrete and to coat the concrete surface by electrodeposits of chemical compounds. This can be accomplished by passing a weak direct current (1.0–3.0 A/m² of concrete surface area) between a reinforcing steel bar (cathode) in concrete and an external electrode (anode) located in an external solution near the concrete surface. This method also accomplishes …

Effects Of Stirrups On Bond Behavior Between Concrete And Corroded Steel Bars, Hongwei Lin, Yuxi Zhao, Ming Sun

International Conference on Durability of Concrete Structures

Steel corrosion leads to the deterioration of bond between concrete and steel bars. The serviceability and ultimate strength of concrete elements within RC structures are hence affected. Many researchers have studied the bond behavior of corroded steel bars. However, very few studies have investigated the effects of confinements on the degradation of bond strength. The present paper proposed a new kind of beam specimen based on which the effects of stirrups on degradation of bond were investigated. The test results proved that stirrups can effectively increase the bond strength between concrete and corroded steel bars.

Effect Of Blast Furnace Slag Powder And Fly Ash On Durability Of Concrete Mixed With Seawater, Nobuaki Otsuki, Takahiro Nishida, Chang Yi, Tomohiro Nagata, Hiroki Ohara

International Conference on Durability of Concrete Structures

According to the report of the United Nations, it is said that two-third of world population would be influenced by water shortage before 2050. To use fresh water effectively, the usage of seawater in concrete industry seems imperative. However, the usage of seawater as concrete material is prohibited in almost all the standards or specifications around the world. In this article, the usage of seawater as a material of concrete based on the results of experimental works and deterioration prediction was discussed. Especially, the effects of by-products such as blast furnace slag or fly ash on the durability of concrete …

Coastal Defenses, U.S., Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides an overview of U.S. military coastal defenses during the period up to and including the War 1812.

Tools For Improving Your Workplace, Ray W. Wilson

Purdue Road School

In this fast-paced session, learn eight practical tools that will help you conduct better meetings, gather, analyze and present data about your organization, and experience how a group can use these tools to quickly learn the causes of problems and to decide where to focus effort.

Analytical System For Planning Of Infrastructure Rehabilitation (Aspire), Purdue Ect Team

ECT Fact Sheets Archive

ASPIRE stands for Analytical System for Planning of Infrastructure REhabilitation, a decision support system that can be used for all kinds of infrastructure facilities. It is based on a rehabilitation modeling theory developed by Professor Makarand Hastak at Purdue University.

Housing The Workforce Following The Canterbury Earthquakes In New Zealand, Yan Chang-Richards, Suzanne J. Wilkinson, Erica Seville, David Brundson

International Institute for Infrastructure Resilience and Reconstruction (I3R2) Conference

Temporary housing following a large-scale disaster has a positive effect on household welfare and community recovery. Following the 2010 and 2011 Canterbury earthquakes, a shortage of temporary accommodation created barriers for the outside construction workforce to engage in repairs and rebuild in Christchurch. This study investigates the impacts of housing shortages for the overall recovery and the strategies adopted by both households and the workforce in the building industry. Findings suggest that the interplay among the industry strategies and household strategies for securing housing determines the magnitude and scope of economy-wide inflation. One unfortunate consequence of these industry strategies is …

Compare And Contrast Major Nuclear Power Plant Disasters: Lessons Learned From The Past, Sayanti Mukhopadhyay, Makarand Hastak Dr., Jessica Halligan

International Institute for Infrastructure Resilience and Reconstruction (I3R2) Conference

The construction of nuclear power plants is a major step towards reducing greenhouse gas emissions compared to the conventional coal-fired or oil-fired power plants. However, some of the major nuclear accidents in the past have raised questions about the safety and reliability of nuclear power plants. This paper compares and contrasts the major nuclear accidents of the past for example, the Chernobyl disaster (USSR), the Fukushima Daiichi disaster (Japan), and the Three Mile Island incident (USA). Although each of the accidents was unique, a thorough comparison found some common issues, such as faulty design of reactors and safety systems, safety …

Postdisaster Reconstruction Of Horizontal Infrastructure Systems: A Review Of The Christchurch Rebuild, Kristen A. Macaskill

International Institute for Infrastructure Resilience and Reconstruction (I3R2) Conference

This paper investigates the decision-making processes guiding postdisaster infrastructure reconstruction— concentrating on wastewater, water supply, stormwater and road networks (“horizontal infrastructure”). It draws on empirical analysis of the postearthquake reconstruction currently underway in Christchurch, New Zealand.

Restoring infrastructure services to provide at least a basic level of essential services after a disaster helps wider economic recovery. Subsequently, there is pressure to restore infrastructure services to predisaster levels as quickly as possible. Reconstruction programmes thus commence in highly uncertain decision-making environments and are reactive to perceived, immediate needs. The extent and nature of the work is later clarified and re-evaluated as …

Selecting A Temporary Debris Management Site For Effective Debris Removal, Jooho Kim, Abhijeet Deshmukh, Makarand Hastak

International Institute for Infrastructure Resilience and Reconstruction (I3R2) Conference

The overall debris removal after disasters is often prolonged due to the huge amount of debris and lack of capacities such as a Temporary Debris Management Site (TDMS) in the community. This results in a delay of overall recovery and increases the total recovery cost. Strategic planning and building a TDMS will help in providing extra time for proper disposal of debris and clearing a disaster-impacted site that will facilitate the reconstruction process. This paper presents a unique approach for identifying and selecting TDMS locations for expediting debris removal from the community. A hypothetical example of a community impacted by …

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

Control Charts As A Productivity Improvement Tool In Construction, Jospeh Hubert Ault

Purdue Polytechnic Masters Theses

This study examined the use of individuals control charts to facilitate the productivity improvement of repetitive construction processes. Cycles times for excavation, forming, and reinforcing processes were observed using stratified random sampling during the construction of six residential home foundations. The cycle time information was plotted on control charts followed by an intervention, with the applicable crew members and management, to analyze the charts and propose solutions to any problems identified. Following the intervention, more samples were collected for comparison to the baseline observations collected before the intervention. The mean cycle times were compared before and after the interventions using …

Design And Construction Process Management, David Brown

Purdue Road School

New approaches for improving design and construction processes have been used recently. Innovative methods for managing the requirements and quality of these processes will be discussed. A systematic data centric approach will be discussed as well as the processes of separating progress from performance. It discusses the integration of these processes in the planning, risk analysis, design, submission, construction, inspection, quality control and documentation phases.

Rumble Stripes: Opportunity To Improve Safety And Retroreflectivity, Thomas M. Brennan Jr., Alan Plunkett, William Smith

Purdue Road School

Painted rumble stripes can provide safety benefits as well as improved retroreflectivy and paint durability. This presentation covers specifications and construction techniques. A case study will describe the recent application of rumble stripes on US 231 between Crawfordsville and Lafayette, Indiana.

Indot Qc/Qa Earthwork And Intelligent Compaction Us 31/Us 35 At Kokomo, Kurt Sommer

Purdue Road School

This presentation discusses a 2012 case study using QC/QA Earthwork Specifications and Intelligent Compaction Rollers for soils.

INDOT Contract IR-30111 in Greenfield District on US 31/ US 35 at Kokomo used this process in 2012 and continuing into 2013 for the control and acceptance of approximately 1 million cubic yards of earthwork.

The Safe Installation And Removal Of Temorary Traffic Control, Bob Karrick

Purdue Road School

This session provides an overview of the safe installation and removal of temporary traffic control.

Mechanical Concrete, Purdue Ect Team

ECT Fact Sheets Archive

Mechanical Concrete® is a way of binding crushed stone aggregates together into a load bearing cellular building unit. The Mechanical Concrete® unit can support compressive loads and resist lateral soil pressure.

Greenpatch® - Cold Mix Asphalt, Purdue Ect Team

ECT Fact Sheets Archive

GreenPatch® is environmentally friendly cold asphalt that is a direct replacement for traditional cold patch in repairing asphalt pavements. This revolutionary breakthrough in the cold asphalt industry contains no petroleum based softeners such as diesel, toluene, kerosene, and naphthalene found in conventional cold asphalt that pose serious threats to human health and the environment.