Open Access. Powered by Scholars. Published by Universities.®

Construction Engineering and Management Commons™

Open Access. Powered by Scholars. Published by Universities.®

California Polytechnic State University, San Luis Obispo

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 691 - 720 of 1032

Full-Text Articles in Construction Engineering and Management

Integration Of Plangrid Into Cal Poly's Construction Management Curriculum: Learn By Doing, Dane M. Clemensen Mar 2020

Integration Of Plangrid Into Cal Poly's Construction Management Curriculum: Learn By Doing, Dane M. Clemensen

Construction Management

PlanGrid is a mobile construction management, document control software that gives builders real-time access to blueprints, punch lists, daily reports, submittals, RFIs and more. It is used throughout the industry by many different construction companies. The purpose of this project is to give Cal Poly construction management students early exposure to PlanGrid in an introduction lab in the jobsite construction class, CM 413. Before the lab was taught, a brief survey was sent out to construction companies asking their thoughts on how much exposure CM students should receive in PlanGrid. After receiving the survey results, the PlanGrid introduction lab was …

Go to article

Integration Of Bim Management Into Custom Residential Construction, Cruz Calderhead Mar 2020

Integration Of Bim Management Into Custom Residential Construction, Cruz Calderhead

Construction Management

The custom residential sector of construction currently lacks the usage of BIM management tools. This paper looks to research the current usage, advantages, and disadvantages of using BIM management software’s within custom residential construction. There will be a comparative case study held between two custom residential contractors, one with minor BIM usage and one who has fully integrated BIM software into their management procedure. The goal is to find out if BIM management is cost-effective and scalable to the custom residential industry. This information will be beneficial to the custom residential industry because it will provide custom residential general contractors …

Go to article

Hydronic Service Valve Product Development, Mark Hunsaker Mar 2020

Hydronic Service Valve Product Development, Mark Hunsaker

Construction Management

Since the inception of modern mechanical and HVAC systems, maintenance and repairs have been prevalent in both contracting and facility operations. The average life of HVAC equipment is fractional compared to the life of buildings as construction technologies improve. Traditionally, the serviceability of heating and cooling equipment has entailed the significant amounts of labor and materials to disruptively drain or freeze hydronic systems in order to cut in means of bypassing the main system, swapping out equipment, or repair. The intent of this project is to explore alternative methods to forgo the aforementioned negative impacts of service and to improve …

Go to article

Cal Poly Associated General Contractors Service- Learning Project In San Ignacio, Belize, Will A. Myers Mar 2020

Cal Poly Associated General Contractors Service- Learning Project In San Ignacio, Belize, Will A. Myers

Construction Management

In the winter of 2020, the Cal Poly Associated general Contractors chapter of San Luis Obispo built over 200 linear feet of soccer seating for the community of Selena, just outside of San Ignacio, Belize. Our team fundraised over $18,000 and designed a soccer stadium that would leave a lasting impact on the community. Throughout all phases of the project, we were challenged with many obstacles that tested our ability to overcome and handle difficult situations.

Go to article

Belize Service Learning: A Case Study In Construction Technology Abroad, Parker H. Doshier Mar 2020

Belize Service Learning: A Case Study In Construction Technology Abroad, Parker H. Doshier

Construction Management

In Winter of 2019, members of the Associated General Contractors, Student Chapter at Cal Poly traveled to Selena, Belize to complete soccer bleachers at the local soccer field. This trip offered an excellent case study into feasibility and benefits of new construction technology on all project sizes and in different countries. SketchUp was used in multiple phases of this project including design, estimating and the creation of as-builts. Procore offers an array of useful features including the scheduling, daily logs and meetings that were used on this project. The scheduling feature was useful in tracking travel deadlines and for monitoring …

Go to article

A Case Study On The Financial Implications Of The Zero Net Energy (Zne) Goal In California, Shane A. Willingham Mar 2020

A Case Study On The Financial Implications Of The Zero Net Energy (Zne) Goal In California, Shane A. Willingham

Construction Management

This paper is a case study that identifies potential financial implications from the updated Title 24, Part 6 code requirements established in 2019 by the California Energy Commission (CEC). The CEC works closely with the California Public Utilities Commission (CPUC), who’s long term goal is to make all residential structures Zero Net Energy (ZNE) throughout the state. The CEC’s updated code requirements include mandatory measures for detached residential homes to meet Zero Net Electricity on an Energy Design Rating (EDR) basis, a step towards Zero Net Energy. The purpose of this study is to understand the additional construction costs associated …

Go to article

Housing And Community Development Project In Siem Reap, Cambodia, Gerald F. Charette Iii Mar 2020

Housing And Community Development Project In Siem Reap, Cambodia, Gerald F. Charette Iii

Construction Management

Habitat for Humanity Global Village is an international organization that gathers materials and volunteers to build homes for less fortunate villages in more than 70 different countries. The team I applied for was chosen to build a house for a family of four in a village near Siem Reap, Cambodia. I chose this as my senior project because it combines my interests in construction and humanitarian work, as well as giving me the opportunity to expand my knowledge of a different country’s construction means and methods. I felt that that the best way to showcase the material that I have …

Go to article

Neca Ghana Project, Michael T. Klee Mar 2020

Neca Ghana Project, Michael T. Klee

Construction Management

Cal Poly’s motto is, “Learn by Doing" and for Cal Poly’s NECA Chapter, this isn’t simply a motto, but a directive for proactive change. For my senior project I will be leading the Cal Poly NECA chapter in the design, pre- fabrication and construction of a 5-7kw solar array, community center, ice production room and technology room in the remote fishing village of Agbokpa, Ghana. The solar array will power multiple industrial DC freezers, high efficiency LED lighting and charging stations while additionally powering water filtration and irrigation systems. Like many other fishing villages around the world, Agbokpa has no …

Go to article

Increasing Health And Safety Through The Utilization Of 4d Modeling, Rogan J. Wells Mar 2020

Increasing Health And Safety Through The Utilization Of 4d Modeling, Rogan J. Wells

Construction Management

Health and safety is one of the most important aspects of the construction industry. Every year there are thousands of work-related injuries in the construction industry. Avoiding these injuries is of the utmost importance on a jobsite. This paper will analyze how building information modeling, specifically the use of 4D building information modeling, can be utilized to increase the overall health and safety of construction jobsite. An exploratory survey was conducted amongst architecture, engineering, and construction industry professionals who hold a wide range of experience. The aim of this survey was to analyze their knowledge and experiences using building information …

Go to article

Construction Curriculum Developed For Continuation Schools, Orlando I. Yepez Mar 2020

Construction Curriculum Developed For Continuation Schools, Orlando I. Yepez

Construction Management

This paper will discuss a curriculum, an introduction to construction fundamentals, that was built for continuation schools. A continuation school is a school for at-risk youth in which it provides programs of empowering, inspiration and outlet. Five modules were created that focus on different sections of the construction industry. These modules consist of Site Safety, Untroduction to Basic Math, Introduction to Power Tools, Introduction to Construction Drawings, and Basic Employable Skills. Each module will consist of a ten-question quiz and presentation. Two homework assignments were also created. One homework assignment for site safety which requires students to identify if the …

Go to article

Analyzing More Sustainable Alternatives Than Using Ordinary Portland Cement In Commerical Construction, Brandon A. Sturla Bs Mar 2020

Analyzing More Sustainable Alternatives Than Using Ordinary Portland Cement In Commerical Construction, Brandon A. Sturla Bs

Construction Management

The purpose of this paper is to look at more sustainable alternative options for concrete use for California Commercial Contractors. This paper will analyze the more sustainable options for concrete and come to conclusions on how effective the alternative options are for protecting the environment, encouraging sustainability, maintaining cost effectiveness, and maintaining efficiency in building. This paper provides data on the negative impact concrete use has had on the environment and potential ways to alleviate this. This paper will also analyze how cost-effective the alternative options are to see if the alternative options are realistic and affordable to use in …

Go to article

Prefabrication And The Labor Shortage On The Central Coast, Brenden Ryan Napier Mar 2020

Prefabrication And The Labor Shortage On The Central Coast, Brenden Ryan Napier

Construction Management

The labor shortage has affected every aspect of construction all over California, however the central coast has been hit especially hard. The central coast’s location between the two major developmental hubs presents challenges such as relocating employees and finding skilled craftsman. One potential method that has been shown to increase productivity and cut costs is to prefabricate. Prefabrication can improve working conditions and increase worker safety while streamlining schedule and reducing environmental impact. While these benefits are certainly possible in larger cities that have the manufacturing grunt, this paper aims to understand if prefabrication is a viable way to alleviate …

Go to article

The Effects Of Covid-19 On Productivity In Project Management: A Case Study, Emily Lynne Gonzalez Jan 2020

The Effects Of Covid-19 On Productivity In Project Management: A Case Study, Emily Lynne Gonzalez

Construction Management

The COVID-19 pandemic has affected many aspects of the construction industry and one of the main aspects that has been affected is productivity. Monitoring productivity on a job is important because it allows us to identify areas that take up the most time and thus gives us the opportunity to allocate resources effectively. Due to safety regulations and new protocols being put in place, the productivity levels on every job has changed. Whether its out in the field or in the office, workplace productivity has certainly been affected by COVID-19. This case study focuses on how the pandemic has affected …

Go to article

Model Block Press Design, Ben Todd Van Hamersveld, Chester Wong, Alexander Wing-Jon Giannousis Dec 2019

Model Block Press Design, Ben Todd Van Hamersveld, Chester Wong, Alexander Wing-Jon Giannousis

Mechanical Engineering

This project’s goal is to redesign the Center for Vocational Building Technology (CVBT) BP9 earth block press, which makes 1/3 scale compressed earth blocks to build demonstration model homes in Thailand. The full-scale block press, the BP6, provides a sustainable and affordable technique for constructing habitable homes in Thailand. The BP9 serves as a tool to inform the public of the advantages of human-powered earth block presses through demonstration. The BP9 press design has multiple problems: it is too expensive to manufacture, there is too much friction when used, it has several weak points due to users unintentionally applying excessive …

Go to article

An Analysis Of Single Family Residences And Townhomes In Los Angeles As An Investment, Maggie Lai Dec 2019

An Analysis Of Single Family Residences And Townhomes In Los Angeles As An Investment, Maggie Lai

Construction Management

Purchasing a home has long been one of the most important financial decisions and big purchases one makes in their life. However, recently rising market prices and a large influx of people moving to large cities, such as Los Angeles, has driven housing prices far beyond many people’s budgets. In fact, affordability is going down at such a rapid rate that currently only 30% of LA County residents actually own a home. Additionally, Los Angeles is currently ranked as the fourth most difficult market for first-time homebuyers to delve in to. Many LA County residents have decided against ever purchasing …

Go to article

Implementing Ti Construction Into Cal Poly's Construction Management Curriculum, Ryan Donald Strong Dec 2019

Implementing Ti Construction Into Cal Poly's Construction Management Curriculum, Ryan Donald Strong

Construction Management

No abstract provided.

Go to article

Increasing The Accessibility Of Bim Training Within The Aec Industry, Xavier Caldera Dec 2019

Increasing The Accessibility Of Bim Training Within The Aec Industry, Xavier Caldera

Construction Management

At the turn of the 21st century, the rise of new technology has helped modernize the AEC industry. Architects, engineers, general contractors, and foremen can build, collaborate, and communicate more efficiently using BIM to help facilitate the building process. The benefits of BIM have been proven through increased coordination, risk mitigation, and cost optimization. However, with the increasing use of BIM, there is a growing education gap between construction workers and BIM technology. Currently, there are three main avenues to learn BIM: in-house company training, attending college, or paying to learn independently online. The foundation for a BIM learning …

Go to article

Interdisciplinary Studio Pavilion [Isp] 2019, Alex Beaubien Dec 2019

Interdisciplinary Studio Pavilion [Isp] 2019, Alex Beaubien

Construction Management

The Interdisciplinary Studio Pavilion 2019 was designed for students within architecture, architectural engineering, and construction management to be placed into eight interdisciplinary teams and design a pavilion that reflected the narrative for the Wine History Project of San Luis Obispo (the “WHP). Its curricula emphasized aesthetics; fabrication methods and techniques; ease of assembly, reassembly and transportability; and function. Deliverables for each team's structure focused on these curricula that required numerous design refinements and construction feasibility studies. This required each team member to contribute their respective knowledge about architecture, structural engineering, and construction to create a pavilion that fulfilled WHP’s goals. …

Go to article

Interdisciplinary Studio Pavilion [Isp] 2019, Rhett Turner Dec 2019

Interdisciplinary Studio Pavilion [Isp] 2019, Rhett Turner

Construction Management

The Wine History Project of San Luis Obispo (the “WHP”) has been collecting and presenting viniculture artifacts from the last two centuries. With the need to display and maintain important artifacts comes the need for a structure that can fulfill such criteria. The purpose of this project was to design a pavilion that could entertain individuals while also displaying artifacts for the WHP. Additionally, the project’s design followed the recently trending method of integrated project delivery, which included the Architecture and Architectural Engineering departments. From the beginning, the design was influenced by its value propositions while still working within the …

Go to article

Interdisciplinary Studio Pavilion (Isp) 2019, Louis Joseph Rampone Dec 2019

Interdisciplinary Studio Pavilion (Isp) 2019, Louis Joseph Rampone

Construction Management

The Interdisciplinary Studio Pavilion 2019 was designed for students the in the majors of architecture, architectural engineering, and construction management to be split into teams to design a pavilion for the Wine History Project. The 8 teams were tasked with designing a pavilion that was able to be easily transported, assembled, and disassembled for the purpose of being moved around to various locations within San Luis Obispo County. This was done by combining each team members individual skillset and knowledge to design the pavilion with these factors in mind.

Go to article

Interdisciplinary Studio Pavilion 2019, Andrew Jacob Cumpian Dec 2019

Interdisciplinary Studio Pavilion 2019, Andrew Jacob Cumpian

Construction Management

The Wine History Project of San Luis Obispo is an organization aimed to preserve the wine making history of the Central Cost of California and share regional viticulture artifacts collected throughout the region. This interdisciplinary pavilion project required design exploration, form development, and constructability review execution to generate a design for a mobile wine-artifact pavilion that will be exhibited throughout the SLO county and beyond. Designing the mobile pavilion required coordination with both architects and architectural engineers to aid in the creation and design a pavilion that was not only visually appealing and functional, but also met the constructability requirements …

Go to article

Interdisciplinary Studio Pavilion [Isp] 2019, Gannon Van Sickle Dec 2019

Interdisciplinary Studio Pavilion [Isp] 2019, Gannon Van Sickle

Construction Management

An Interdisciplinary studio involves different knowledge disciplines who work together to achieve a common goal. This project engages this idea with three different majors. Our objective was to create a Pavilion to display wine history artifacts from the central coast. The project teams consist of architecture, construction management, and structural engineering majors. Each group was tasked with designing a portable pavilion that would achieve the desired objectives of the clients. At the end of the quarter the client will choose which project to be built. The roles of the different disciplines overlap, creating a project viewed at from many perspectives. …

Go to article

The Need For A Real Estate Development Capstone Course, Will Robert Kieckhefer Dec 2019

The Need For A Real Estate Development Capstone Course, Will Robert Kieckhefer

Construction Management

Cal Poly has extremely well-known programs in Construction Management, Business, Engineering, and Architecture. All of these programs have contributed multiple leaders to the building industry every year yet have neglected to integrate the different disciplines that overlap within the industry. The research the author has collected to support the need for a real estate development capstone course included in-person interviews, online research, personal experience, and team surveys. The research concluded the need for a real estate development capstone course that would integrate students from the school of Business, Architecture, and Construction Management. In order to build a successful project, all …

Go to article

Interdisciplinary Studio Pavilion [Isp] 2019, Albert J. Gutierrez Dec 2019

Interdisciplinary Studio Pavilion [Isp] 2019, Albert J. Gutierrez

Construction Management

Historically Cal Poly’s motto has been ‘Learn by Doing’ and the College of Architecture and Environmental Design (CAED) is one of the leading examples of this. Many students gain valuable hands-on and real-world experience through collaborative projects and assignments. Through this learn by doing philosophy and collaborative learning approach Cal Poly construction management, architecture and architectural engineering students worked together in 8 separate studio teams to design and construct a portable pavilion for the Wine History Project of San Luis Obispo County. Acting as a client they requested that we design a portable pavilion space that will be used to …

Go to article

Cal Poly Construction Management Student’S Main Determinants For Potential Employment Opportunities: A Guide For Employers, David Joseph Van Buskirk Ii Dec 2019

Cal Poly Construction Management Student’S Main Determinants For Potential Employment Opportunities: A Guide For Employers, David Joseph Van Buskirk Ii

Construction Management

California Polytechnic State University’s Construction Management department has an excellent reputation. This reputation, boosted by a 100% placement rate, attracts an abundant number of recruiters, a number that continues to grow every year. With the large number of recruiters coming to campus, students often find themselves in the fortunate situation of having multiple offers and having the opportunity to select amongst various companies. To be competitive, employers would best serve to cater their recruitment process to suit the needs of the students they are trying to hire. While plenty of research has been conducted to investigate and determine how recruiters …

Go to article

Feasibility Of Reclaimed Lumber In Construction, Ernest Michael Banchero Dec 2019

Feasibility Of Reclaimed Lumber In Construction, Ernest Michael Banchero

Construction Management

As sustainable building becomes more and more prevalent in the construction industry, builders and homeowners are experimenting more with different kinds of building materials. The focus of this paper is on reclaimed wood. One can find reclaimed wood almost anywhere, in an old barn, lumber yards, basically any place that has valuable wood that is not being used. This wood is then taken to a mill and cleaned up. Imperfections are removed, nails are taken out, and any finish that will be used is applied. Reclaimed wood has grown in popularity in construction projects over the last few decades. The …

Go to article

Interdisciplinary Student Competition For California Polytechnic State University - San Luis Obispo, Forest G. Gobble Dec 2019

Interdisciplinary Student Competition For California Polytechnic State University - San Luis Obispo, Forest G. Gobble

Construction Management

Cal Poly has a reputation for producing some of the best qualified graduates in their respective fields of study. While this is very important, curricular activities involving collaboration between students within the same college are limited (excluding same major). Beyond that, collaboration opportunities across colleges are even more rare. When graduates enter the workforce, many are thrust into highly collaborative environments across various disciplines. Industry professionals have shown a strong desire for young people who have had exposure to realistic problems and experience working with other professions outside of their own field of expertise. The question needing answering is, would …

Go to article

Implementing Weekly Work Plan Lab Into Cm 214 - Residential Construction, David Maslan Dec 2019

Implementing Weekly Work Plan Lab Into Cm 214 - Residential Construction, David Maslan

Construction Management

A schedule is one of the primary components of any construction project and can determine the success of a job. Schedules most often contain high-level line items and lack the details it takes to actually implement daily work in the field. Subcontractors, as the specialists, understand the myriad of smaller tasks that a master schedule omits. It is the job of a superintendent to extract this information from subcontractors during pull plans, to build precise schedules, called weekly work plans (WWP). At Cal Poly it is expected that students receive a well-rounded curriculum in how to build various types of …

Go to article

Feasibility Of Collaborative Alliance Association For Non-Competitive Small Business Contractors, Brody Allen Gill Dec 2019

Feasibility Of Collaborative Alliance Association For Non-Competitive Small Business Contractors, Brody Allen Gill

Construction Management

Small business construction contracting firms around the country struggle with growing their business successfully. This is a result of unknown results from new business practices and few resources to initiate programs that can improve productivity and efficiency. A simple solution could give small business construction contractors the opportunity to share ideas, compare company analytics and promote professional networking in a non-competitive, collaborative alliance. The goal of this project is to determine if a collaborative alliance association using data benchmarking would be an effective solution for non-competitive small business contractors to grow their businesses. Thereafter being proven effective, is such an …

Go to article

Stem And The Skilled Labor Shortage In The United States, Nicolo Tetsuo Hoshizaki Dec 2019

Stem And The Skilled Labor Shortage In The United States, Nicolo Tetsuo Hoshizaki

Construction Management

There is a growing shortage of skilled labor in the United States construction industry. As the baby boomer generation prepares to leave the workforce, this problem is getting exponentially worse. As Science, Technology, Engineering and Mathematics programs have become the U.S. Department of Education’s top priority, more young adults are pursuing higher education and entering the STEM workforce. Using quantitative and qualitative research methodologies, this paper provides an explanation as to why a logical method to assuage the labor shortage in construction is to employ vocational programs that prepare young adults to enter the industry similar to how STEM programs …

Go to article

First Prev Next Last