Construction Engineering and Management Commons^™

Elements Of Safety Management System In The Construction Industry And Measuring Safety Performance – A Brief, Mostafa Elsebaei, Omar Elnawawy, Ayman Ahmed Ezzat Othman, Mohamed Badawy

Architectural Engineering

Construction industry is considered to be one of the most hazardous industries in the world. The reason could be attributed to its hazardous nature as it is an accident-prone industry. Thus, a need for better understanding of safety management system is essential for improving safety performance in this sector. This paper discusses briefly the elements of safety management by presenting different systems (such as Oregon OSHA Occupational Health and Safety Administration, and OTAR Overseas Territories Aviation Circle) and elaborating their elements. It also discusses two types of measuring safety performance the first is the lagging indicators and the second is …

A Framework For Implementing Integrated Project Delivery In Architecture Design Firms In Egypt, Ayman Ahmed Ezzat Othman, Lamis Yasser Wagih Youssef

Architectural Engineering

Purpose

This paper aims to develop a framework for implementing the integrated project delivery (IPD) approach during the design process in architecture design firms (ADFs) in Egypt.

Design/methodology/approach

A research methodology consists of literature review, case studies and survey questionnaire was designed to achieve the abovementioned aim. First, literature review was used to identify and categorise the challenges of implementing IPD during the design process. Second, four case studies were analysed to investigate the values delivered to the client or missed due to the use of IPD or traditional procurement approaches, respectively. Finally, a survey questionnaire was carried out with …

A Framework To Activate The Health And Safety Regulations In The Egyptian Construction Industry, Mostafa Adel Elsebaei, Ayman Ahmed Ezzat Othman, Omar Elnawawy, Mohammed Badawy

Architectural Engineering

Purpose

The construction industry is considered one of the most dangerous industries especially in developing countries such as Egypt. Although safety in Egypt is regulated by mainly four pivotal legislations, namely, Law No. 12 (2003) and Ministerial Decrees No. 211, 126 and 134, construction accident records in Egypt are high. Accordingly, this paper aims to develop a framework to activate the health and safety regulations in the Egyptian construction industry.

Design/methodology/approach

To achieve this aim, a research methodology consisting of a literature review and a survey questionnaire was developed to accomplish three objectives. First, a literature review was used to …

Achieving Sustainability Through Reducing Construction Waste During The Design Process: A Value Management Perspective, Ayman Ahmed Ezzat Othman, Sherouk Mohamed Abdelrahim

Architectural Engineering

Purpose:

The purpose of this paper is to investigate the role of Value Management towards achieving sustainability through reducing the construction waste during the design process.

Design/methodology/approach

To achieve the abovementioned aim, a research methodology consisting literature review and survey questionnaire is designed to achieve the following objectives: first, building a comprehensive understanding of the research topic through reviewing literature related to the nature of the construction industry, waste in construction, sustainability, the design phase and Value Management; second, presenting and analysing two case studies to validate the role of Value Management towards reducing waste in construction projects; third, conducting …

An Investigation Into Solid Waste Problem In The Egyptian Construction Industry: A Mini-Review, Ahmed Osama Daoud, Ayman Ahmed Ezzat Othman, Herbert Robinson, Ali Bayyati

Architectural Engineering

Solid waste management (SWM) is one of the most critical global challenges nowadays. It has a severe negative effect on the triple bottom line of sustainability. Construction and demolition waste (CDW) contributes about 50% of the total global annual generated SW. In the particular case of the Middle East and North Africa (MENA) region including Egypt, the SW problem has become a major challenge, and the need to find sustainable solutions is overwhelming. However, the region faces several challenges that hinder the development of an effective and efficient SWM system. This has resulted in the predominance of unsustainable SWM practices …

Auto-Calibration Of Wim Using Traffic Stream Characteristics, Johnson Baker

Graduate Theses and Dissertations

This project evaluates the performance of Weigh-in-Motion (WIM) auto-calibration methods used by the Arkansas Department of Transportation (ARDOT). Typical auto-calibration algorithms compare the WIM measured weights of vehicles from the traffic stream to reference values, using five-axle tractor-trailer configured trucks for comparisons, e.g. Federal Highway Administration (FHWA) Class 9. Parameters of the existing algorithms including the Front Axle Weight (FAW) reference value, the sampling frequency required to update the calibration factor, and thresholds for Gross Vehicle Weight (GVW) bins were evaluated. The primary metric used to estimate algorithm performance was Mean Absolute Percent Error (MAPE) between the WIM and static …

Turbulent Effects On Building Pressure Using A Two-Dimensional Finite Element Program, Jonese Woods

Civil Engineering Undergraduate Honors Theses

Much of the knowledge about building aerodynamics today was obtained from physical testing like wind tunnel testing. Physical testing is time-consuming and very expensive. As a result, computational methods like the finite element method are being explored for use in building aerodynamics. Despite several years of research, there is still not a clear understanding of the peak pressure on buildings due to turbulence. Many of the research thus far has focused on comparing different computational methods. However, much work is needed in understanding the capability of the individual methods. In this work, a two-dimensional finite element program is used to …

Rough Roads Ahead!?, Sarah Reed, Brooke Thomas, Jim Hellmann

Purdue Road School

Have you ever found yourself in the public's cross-hairs when it is time to implement a few roadway improvements? Are you handicapped in your ability to describe the true value of community planning and economic development planning? Come hear from one dynamic trio with the ability to identify issues and opportunities that others might not see and work to uncover even more ways tin which we are better together.

Analysis Of Student-Athletes And Summer Internship Experiences In The Construction Management Department, Amanda Rose Sandoval

Construction Management

Summer internships are a valuable way for implementing practical knowledge in the construction industry. Students can apply what they have learned during the school year and visualize the reality of how construction is managed. This project will research what student-athletes typically invest their time in over summer and the construction company’s connection to the student-athlete department. The analysis will identify if there is a need to propose a program that can improve the relationship between the construction management and student-athlete departments. Two surveys were conducted to collect information about student-athletes summer activity history and their perspective of internship experience, as …

Habitat For Humanity: A Student-Led Service Trip To Thailand, Amber Reiff

Purdue Journal of Service-Learning and International Engagement

Amber Reiff started volunteering with Habitat for Humanity in high school and joined the Purdue Student Chapter as a freshman in 2014. During her sophomore year, she became more involved and held the position of Vice President of Development. While serving in this role, she planned on-campus advocacy events and recruited volunteers for Saturday site builds. In 2017, she traveled to Lampang, Thailand, over spring break with a group of like-minded students striving to make a difference. In this article, she shares her experiences on this trip and explores the impact of her participation. Beyond this trip, she has continued …

Executive Summary_Feasibility Of Harbor-Wide Barrier Systems: Preliminary Analysis For Boston Harbor, Paul Kirshen

Sustainable Solutions Lab

This report presents a preliminary feasibility assessment of harbor-wide barrier systems designed to protect Boston Harbor from coastal flooding caused by sea level rise (SLR) and storm surges. Conducted by the Sustainable Solutions Lab at the University of Massachusetts Boston and supported by the Boston Green Ribbon Commission, the study evaluates two primary configurations: an Outer Harbor Barrier (OHB) and an Inner Harbor Barrier (IHB). Using hydrodynamic modeling, economic cost-benefit analysis, and social vulnerability assessments, the study finds that while both barrier systems may reduce risk from extreme storm events, they do not mitigate regular tidal flooding without frequent gate …

Feasibility Of Harbor-Wide Barrier Systems: Preliminary Analysis For Boston Harbor, Paul Kirshen

Sustainable Solutions Lab

This report presents a preliminary feasibility assessment of harbor-wide barrier systems designed to protect Boston Harbor from coastal flooding caused by sea level rise (SLR) and storm surges. Conducted by the Sustainable Solutions Lab at the University of Massachusetts Boston and supported by the Boston Green Ribbon Commission, the study evaluates two primary configurations: an Outer Harbor Barrier (OHB) and an Inner Harbor Barrier (IHB). Using hydrodynamic modeling, economic cost-benefit analysis, and social vulnerability assessments, the study finds that while both barrier systems may reduce risk from extreme storm events, they do not mitigate regular tidal flooding without frequent gate …

Subcontracting And The Survival Of Plants In The Road Construction Industry: A Panel Quantile Regression Analysis, Dakshina G. De Silva, Georgia Kosmopoulou, Carlos Lamarche

Economics Faculty Publications

This paper investigates how subcontracting parts of contracted work shapes entrants’ success and survival. We find that newly developed quantile regression approaches can be adapted to study survival of firms competing for government contracts in road construction. The method is applied on a data set that includes patterns of firm entry, exit and auction related information. We find an apparent increase in the business life of firms who subcontract out part of their projects. In Texas, these subcontracting effects appear to be more pronounced for firms with few or no options outside the industry, and among firms who contract out …

Wartime Construction Project Outcomes As A Function Of Contract Type, Ryan M. Hoff, Gregory D. Hammond, Peter P. Feng, Edward D. White

Faculty Publications

The United States has spent more than $23 billion on construction in Afghanistan since 2001. The dynamic security situation created substantial project uncertainty, and many construction projects used cost-plus-fixed-fee contracts (CPFF) instead of the firm-fixed-price (FFP) norm. Using a dataset of 25 wartime construction projects managed by the Air Force Civil Engineer Center, the authors sought to confirm that both contract types yield project outcomes consistent with the established literature. As expected, they found CPFF contracts had greater cost and schedule growth than FFP. However, they did not find differences regarding as-built quality. Additionally, the authors sought to determine whether …

Case Studies Of Cavity And External Wall Insulation Retrofitted Under The Irish Home Energy Saving Scheme: Technical Analysis And Occupant Perspectives, Aimee Byrne, Gerard Byrne, Garrett O'Donnell, Anthony Robinson

Articles

The residential sector represents 27% of primary energy consumption in Ireland. This paper examines the case study of the Irish government’s national grant scheme to encourage energy efficiency retrofit in private housing. That is the Home Energy Saving (HES) Scheme, later rebranded the Better Energy: Homes (BEH) Scheme. The methodology involved monitoring several homes immediately before and after retrofit alongside discussions with occupants. The examination focused on specific measures commonly introduced through the HES/BEH programme − cavity and external wall insulation. It has been found that a significant decrease in heat loss through the walls was measured in all cases. …

A Sustainability-Based Project Selection Algorithm: Socio-Technical-Economic Project Selection (Steps) Algorithm, Bharathi Bhattu

Dissertations, Master's Theses and Master's Reports

Multi-dimensional aspects play a vital role in the task of project-decision making. Environmental effects are to be considered in addition to other technical and non-technical aspects in order to avoid undue environmental damage. This current work introduces a new decision-making algorithm (Socio-Technical-Economic Project Selection or STEPS) that is demonstrated with the use of RCA (recycled concrete aggregate) as riprap for slope stabilization and erosion control which leaches chemical arsenic when in contact with water. Arsenic has long been recognized for its lethal properties. The main intention of introducing this new algorithm is to use sustainability concepts of social, technical, and …

A Cost Benefit Analysis Of Improving Energy Efficiency Of A Fitness Facilty, Inuri A. Illeperuma

Journal of Environmental and Resource Economics at Colby

Abstract: Nearly 40% of the total U.S. energy consumption in 2012 was consumed in residential and commercial buildings, as recorded by U.S. Energy Information Administration. With the urgent need to reduce overall energy consumption in the U.S., many efforts are made to improve the energy efficiency of buildings. However, energy managers identify budget constraints as one of the main obstacles in improving the energy efficiency of buildings. Hence this study focuses on a cost benefit analysis of improving the energy efficiency, with a special focus on fitness facilities in college environments. As a case study, the author focuses on improving …

Coastal Defenses, U.S., Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides an overview of U.S. military coastal defenses during the period up to and including the War 1812.

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Housing The Workforce Following The Canterbury Earthquakes In New Zealand, Yan Chang-Richards, Suzanne J. Wilkinson, Erica Seville, David Brundson

International Institute for Infrastructure Resilience and Reconstruction (I3R2) Conference

Temporary housing following a large-scale disaster has a positive effect on household welfare and community recovery. Following the 2010 and 2011 Canterbury earthquakes, a shortage of temporary accommodation created barriers for the outside construction workforce to engage in repairs and rebuild in Christchurch. This study investigates the impacts of housing shortages for the overall recovery and the strategies adopted by both households and the workforce in the building industry. Findings suggest that the interplay among the industry strategies and household strategies for securing housing determines the magnitude and scope of economy-wide inflation. One unfortunate consequence of these industry strategies is …

Implementing Green Roofs On Movie Theaters And Shopping Centers: Business Cases In Profitable Sustainability, Ryan J. Miller

Pomona Senior Theses

This thesis presents the business case for installing green roofs on movie theaters and shopping centers. These businesses can then derive increased profits from the environmental benefits of reduced energy use and increased stormwater retention. After presenting the basic design and benefits of a green roof, the thesis develops stand-alone business plans for a movie theater and shopping center. The author finds that green roofs are a profitable sustainability solution for the commercial enterprise.

Performance Comparison Of Design-Build And Construction Manager/General Contractor Highway Projects, Binita Shakya

UNLV Theses, Dissertations, Professional Papers, and Capstones

Researchers have conducted numerous studies comparing project performance of design-bid-build (DBB) and design-build (DB) highway projects. However, little research has been done to compare the performance of DB and construction manager/general contractor (CM/GC) highway projects. Therefore, an exploratory study was conducted to compare the performance of 55 DB and 34 CM/GC highway projects from various States Departments of Transportation (DOTs) in terms of cost, change orders, and construction intensity. The results showed that contract award cost growth was significantly lower in DB projects than in CM/GC projects. In contrast to this, the total cost growth of DB projects was higher …

Finishing The Job: A Partnership For Diversity In The Construction Workforce, Susan Moir, Liz Skidmore, Janet Jones, Brian Doherty

Office of Community Partnerships Posters

The Policy Group on Tradeswomen’s Issues (PGTI) is a regional collaboration of construction industry stakeholders working together since 2008 to tackle the persistent failure of policies enacted to open up good paying jobs in the construction trades to women. Our focus on women explicitly supports efforts to increase all forms of diversity in the construction industry. Following the publication of our 2011 founding document, Unfinished Business: Building Equality for Women in the Construction Trades, PGTI has focused on the development and implementation of best practices for a diverse construction workforce in public and non-profit construction.

Applying Cognitive Principles To The Delivery Of Engineering Information By Different Mediums, Gabriel B. Dadi

Theses and Dissertations--Civil Engineering

Construction project performance and worker productivity are often tied to the availability and effective presentation of information, tools, materials, and equipment. While advancements in technology have improved much of the processes on a construction project, the medium of information dissemination at the construction work face has consistently relied on the use of two dimensional drawings and specifications.

Industry initiatives are driving increased collaboration through three dimensional BIM (Building Information Modeling) models. However, the added dimension partially loses its effect when presented on a two dimensional computer monitor. Other computer forms of presentation intended for mobility (PDAs, laptops, and tablets) can …

Slope Stability Monitoring Using Remote Sensing Techniques, Omar Alberto Conte Robles

Graduate Theses and Dissertations

During the past six years the Arkansas State Highway and Transportation Department (AHTD) has spent over nine million dollars repairing slope failures that have occurred in the state of Arkansas. Specifically, higher than average precipitation in 2004 and 2008 led to large quantities of slides, all of which were repaired. Two highways, within the state of Arkansas, with known historical movements along or across the highways are being monitored using traditional surveying techniques and advanced remote sensing techniques. These slides, both of which are located in fill slopes. One a 500-foot long slide located north of Chester, Arkansas, within the …

Fall Prevention Training And Its Impact To Southern Nevada Construction Workers, Vedaspati Joshi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Death and injury from falls are a long-standing and continuing problem in construction, responsible for at least a third of the construction deaths in the U.S. from 2004 to 2007. Each of those years, Nevada has exceeded the national percentage. Although 29 CFR 1926.503 sets forth Occupational Safety and Health Administration (OSHA)'s requirements that construction employers train employees exposed to fall hazards and document such training, the incidence of deaths and injuries from falls are an indicator that this training was not provided or else was not effective.

Conventional fall protection training is more narrowly focused on recognizing fall hazards …

Unintended Social And Economic Consequences Resulting From The Implementation Of New Construction Technologies In The Developing World, Andrew J. South

Theses and Dissertations

One of the key components of international development is to provide adequate shelter for citizens of developing countries. This is often accomplished by governmental, non- governmental, and private organizations that seek to lower the cost, increase the quality, and expand the availability of safe, sustainable housing through the use of innovative technologies. These new technologies can affect the social and/or economic structure within communities. This paper is a case study resulting from the construction of a seventy-one-home village, including infrastructure, near Yogyakarta, Indonesia by a foreign, aid-based non-governmental organization (NGO). The village was relocated less than two kilometers from its …

Natural Fibers And Fiberglass: A Technical And Economic Comparison, Justin Andrew Zsiros

Theses and Dissertations

Natural fibers have received attention in recent years because of their minimal environmental impact, reasonably good properties, and low cost. There is a wide variety of natural fibers suitable for composite applications, the most common of which is flax. Flax has advantages in tensile strength, light weight, and low cost over other natural fibers. As with other natural and synthetic fibers, flax is used to reinforce both thermoset and thermoplastic matrices. When flax is used in thermoplastic matrices, polypropylene and polyethylene are the main resins used. Although at first glance flax may seem to be a cheaper alternative to fiberglass, …

A Study Of Craft Worker Length Of Employment At Select Missouri Construction Companies, Richard D. Bruce

All-Inclusive List of Electronic Theses and Dissertations

Craft worker retention is a constant concern of construction firms who selfperform portions of projects. These companies must maintain an understanding oftheir work force. A methodology is presented in this study for studying information in readily available employee databases to gain such an understanding. Using a sample of 10 of Missouri's 17 largest contractors, that employ 5,277 craft workers; this study examined the employee databases to identify differences in mean length of employment based on hire age, craft, union affiliation, and company size. The analysis of variance statistical technique was utilized to test four null hypotheses. Based on the test …

Training Module In Regional And Municipal Governance Of Public Private Partnerships, Louis Gunnigan

Conference papers

This module concentrates on the issues important to those who will be setting up PPPs and who are involved in government at a regional or municipal level.

The module is centred on five tasks, namely:

• How to identify PPP opportunities and to find the best private sector partners for a PPP;
• How to organize a PPP programme within a government by enhancing cooperation amongst the relevant departments and ministries, local, regional and national authorities;
• How to be an effective manager and leader in a dynamic PPP unit;
• How to engage public support for PPPs;
• How to use international instruments to …