Construction Engineering and Management Commons^™

A Solution For Commodity Field Hauling With Self-Unloading Semi-Trailers, Lee Pagens Wilkerson

Theses and Dissertations

Commodity hauling of bulk goods is a growing enterprise that has expanded from hauling agricultural products to hauling many other bulk products. Commodity trailers are used to haul agricultural products from storage facilities to processing plants. These trailers are designed for highway use but are frequently required to work in field conditions as well. In many cases this environment overstresses these trailers and results in permanent irreparable damage. In addition to the structural problems of these trailers, the current systems for unloading the bulk produce from these trailers have serious inadequacies. While functional, the currently used chain and non-chain driven …

Automated Manipulation For The Lotus Filament Winding Process, Jeffrey V. Anderson

Theses and Dissertations

The filament-winding process produces quality consistent composite parts for many industries. Filament winding allows for consistent quality parts by automating the winding process. A recent development of filament winding is the Lotus process. The Lotus process reverses conventional filament winding by leaving the mandrel stationary and winding composite fiber around the mandrel. The automated Lotus filament-winding machine is controlled by four-axis control manipulating the Lotus ring around a fixed mandrel. This allows Lotus filament winding to wind parts that do not have a linear axis. Lotus filament winding is in its early stages of development. As a second step in …

A Gasless Method Of Spraying Thermoplastic Resin, Dan T. Rogers

Theses and Dissertations

This spraying method for thermoplastic resins is a new manufacturing process for applying thermoplastics to a mold or surface in an efficient way that has the potential of reducing cycle time. Spraying thermoplastic resins is similar to spraying other polymers, such as paint, with the differences being higher pressure and temperature. This method uses an injection molding machine with a modified nozzle to spray the plastic material. In this study, temperature, pressure, and nozzle size were factors that influenced the success of this spraying method. The method of spraying in this study proved spraying without a gas is possible, a …

Development Of Commercial Applications For Recycled Plastics Using Finite Element Analysis, Nanjunda Narasimhamurthy

Theses and Dissertations

This thesis investigates the suitability of thermo-kinetically recycled plastics for use in commercial product applications using finite element analysis and statistics. Different recycled material blends were tested and evaluated for their use in commercial product applications. There are six different blends of thermo-kinetically recycled plastics used for testing and CATIA is used for finite element analysis. The different types of thermo-kinetically recycled plastics blends are: pop bottles made of PolyethyleneTeraphthalate (PET), milk jugs made of High-Density Polyethylene (HDPE), Vinyl seats made of Poly Vinyl Chloride (PVC) and small amount of Polypropylene (PP) and Urethane, electronic scrap made of engineering resins …

Integrating Value Stream Mapping And Simulation, Michelle E. Scullin

Theses and Dissertations

An important principle in Lean manufacturing, value stream mapping (VSM) can be helpful in understanding how process flow and information flow affect each other. A VSM is a static picture of a process that allows the user to see where value is added into the value stream. Simulation is used to evaluate the behavioral issues of processes. In a manufacturing realm this means simulation shows how each operation affects other operations so determinations can be made about where bottlenecks or other problems exist in the process. Theoretically, the integration of VSM and Simulation can aide in process improvement by showing …

Determination Of Wall Thickness And Height When Cutting Various Materials With Wire Electric Discharge Machining Processes, Sangseop Kim

Theses and Dissertations

This thesis looks at the capabilities of cutting thin webs on Wire EDM machines that are difficult or impossible to machine using conventional methods. Covered is an investigation of how different material and web thickness affect the capability of machining thin-walled parts.

Five different metals are used for the test; Aluminum 6061 T6, Yellow Brass SS360, 420 Stainless Steel, D2 unheat-treated tool steel 25-30 RC, and D2 heat-treated tool steel 60-65 RC. The small parts were cut to a 6mm (0.2362 inch) height with six different wall thicknesses: 0.30mm (0.0118 inch), 0.25mm (0.0098 inch), 0.20mm (0.0078 inch), 0.15mm (0.0059 inch), …

A Tool Wear Comparative Study In Turning Versus Computer Simulation In 1018 Steel, Woodrow D. Miner

Theses and Dissertations

The material removal process uses cutting tools in order to produce the desired shape of the workpiece. Tool wear has been a problem for cutting tools, since cutting tools wear and break. Research has been accomplished in the tool wear field for tool life and more recently tool wear. The computer generation has created a method to simulate the material removal process. These computer simulations model the cutting tool reaction with the workpiece. Many of the simulation models use finite element analysis to calculate the reaction of the cutting tool. Different finite element models are being used throughout the world …

The Purposes And Evaluation Methods For State Residential General Contractor Licensing, James Ellis Fenn

Theses and Dissertations

The main topic in the licensing debate is whether licensing affects construction quality. Available literature and previous studies indicate that it does not. The real question is not whether licensing improves quality, but whether the improving quality is the actual purpose of licensing. There is little information available on the purpose of licensing as defined by state licensing departments as well as a general lack of information on how states evaluate whether licensing is fulfilling the intended purpose. In order to effectively resolve some of the issues surrounding the construction licensing debate, the true purpose of licensing and the methods …

New Product Launch Decisions Under Competition And Uncertainty: A Real Options And Game-Theoretic Approach To New Product Development, James O. Ostler

Theses and Dissertations

New product development is central to many firms' future success. Not only as a means to continue to maintain their piece of the market, but product development can also be a strategic means for a company to diversify, and/or alter focus to adapt to changing market conditions.

Most of the research in new product development has been on how to do it cheaper and faster than the next guy. However, early commercialization does not guarantee a position of strength in the market. Failures of EMI in CT scanners and Xerox in personal computers illustrate that being first to market does …

A Finite Element Simulation Of Temperature And Material Flow In Fricton Stir Welding, Mark J. Lasley

Theses and Dissertations

The purpose of this research was to use the Transvalor S.A. product, Forge3, to develop a finite element simulation of the friction stir welding process that improves the predictability of temperature evolution and material flow within the plunge portion of the process. Previous modeling created more heating within the billet than experimental results, probably due to the simplification of the simulation with adiabatic boundary conditions. More realistic tooling temperatures were included in this model as these affect heat evolution which is a determining factor in microcrystalline growth. These results were validated by experimental efforts using a billet and tooling instrumented …

A Method For Winding Advanced Composites Of Unconventional Shapes Using Continuous And Aligned Fibers, Abraham K. Allen

Theses and Dissertations

Advanced composites are extremely strong, rigid, and light, even when compared with advanced metals. Advanced composites are replacing high-tech metals as the material of choice for aerospace engineering. However, the processes used to manufacture advanced composites generally lose some of the properties of the materials by their process limitations.

One process that keeps the theoretically awesome qualities of the composite materials in tact is filament winding. Filament wound parts are used as rocket shells, bicycle frame tubes, drive shafts, pressure vessels, etc. Filament winding is an automated process and makes reliable parts to close tolerances. If a straight tube were …

The Effectiveness Of Computer-Based Tutorials In Learning Computer-Aided Design Methods For Tool Design Procedures, Andrew Moroni Hall

Theses and Dissertations

Throughout the past twenty-five years the process of designing and manufacturing a product has been revolutionized by the integration of Computer Aided Design (CAD). Although three-dimensional solid modeling, or 3-D CAD offers a better representation of the product in a virtual environment, it can be complicated and difficult to learn. Tutorials have been developed to assist manufacturing tool design student in the learning of 3-D CAD principles as they apply to tool design. This study seeks to test the effectiveness of those tutorials. A BYU tool design class was divided into two groups according to their assigned laboratory time. The …

The Benefit Of Using Simulation To Improve The Implementation Of Lean Manufacturing Case Study: Quick Changeovers To Allow Level Loading Of The Assembly Line, Jack J. Mcclellan

Theses and Dissertations

In today's competitive manufacturing environment, companies are constantly looking for ways to improve. Because of this, many companies are striving to become "lean" by implementing lean manufacturing, which is a difficult process. To aid in the implementation of lean manufacturing, simulation was used to reduce the trial-and-error period of lean manufacturing and find to optimum approach to implement the lean manufacturing principle. In this research, a case study of implementing level loading of the production schedule for BullFrog International, L.C. will be examined. To make it possible to implement level loading, the thermo-former machine at the beginning of the operations …

A Review Of Setup Practices And Procedures For Creating Ieee 802.11 Wireless Community Networks, Jae M. Theobald

Theses and Dissertations

IEEE 802.11 wireless networking equipment has made it possible to bridge the last mile for new broadband internet service providers. Inexpensive wireless networking equipment and high gain antennas enable high speed internet delivery at a fraction of the cost of installing or upgrading land lines for cable or DSL services. Based on this research, a guide of general practices and procedures is proposed for designing, installing, and maintaining a reliable wireless community area network. Included tests have provided performance results for several types of wireless antennas (including wire grid parabolic dishes, Yagi and Vagi styles, and echo backfire), wireless bridges, …

The Contextable: Building And Testing An Intelligent, Context-Aware Kitchen Table, Daniel Matthew Hoopes

Theses and Dissertations

The purpose of this thesis was to design and evaluate The ContexTable, a context-aware system built into a kitchen table. After establishing the current status of the field of context-aware systems and the hurdles and problems being faced, a functioning prototype system was designed and built. The prototype makes it possible to explore established, untested theory and novel solutions to problems faced in the field.

Understanding Manufacturing Energy Use Through Statistical Analysis, J. Kelly Kissock, John Seryak

Mechanical and Aerospace Engineering Faculty Publications

Energy in manufacturing facilities is used for direct production of goods, space conditioning, and general facility support such as lighting. This paper presents a methodology for statistically analyzing plant energy use in terms of these major end uses. The methodology uses as few as 60 data points that are relatively easy for most plants to obtain. Multivariable change-point models of electricity and natural gas use as functions of outdoor air temperature and production data are then developed. The statistical models can be used to predict energy use for energy budgeting, measure savings, determine cost structures, and diagnostic purposes. Moreover, in …

A Descriptive Performance Model Of Small, Low Cost, Diskless Beowulf Clusters, Curtis R. Nielson

Theses and Dissertations

Commodity supercomputing clusters known as Beowulf clusters, have become a low cost alternative to traditional supercomputers. Beowulf clusters combine inexpensive computers and specialized software to achieve supercomputing power. The processing nodes in a diskless Beowulf cluster do not have a local hard disk unlike the nodes in most commodity clusters. Research has provided performance information for diskless clusters built with expensive, high performance equipment. Beowulf clusters use commodity off-the-shell hardware, and little information is available about their performance. This research includes the construction of several diskless Beowulf clusters. Using the NAS Parallel Benchmarks, the performance of these clusters was measured. …