Construction Engineering and Management Commons^™

Construction Management Internship: A Key Opportunity For Assessment And Continuous Curriculum Improvement, James S. Vaux, Bree Dority, Dana E. Vaux

The Professional Constructor

The internship is an integral part of most Construction Management curricula. Studies have noted the importance and reciprocal value of internships for the student, the employer, and the academic program. However, to date, no studies have specifically outlined the value internships provide to the CM program for assessment and evaluation. This paper examines the value of the CM internship as an indirect measure to assess and incorporate change into program curricula. With 10 years of qualitative and quantitative data collected from CM student interns, industry employers, and university internship supervisors, this study supports that CM internships are a valuable tool …

Cost-Benefit Analysis Of The Saudi Land Bridge Project, Faris J. Alotaibi

Theses and Dissertations

Projects are the backbone of economic thrive of nations, especially infrastructure projects. It’s counted as the base layer of allowing economic trade between beneficiaries. Railway projects have always been a huge element in increasing trade operations between Saudi Arabia and the rest of the world, by providing an efficient and environmentally friendly way that is capable of hauling large loads of exports all the way to the seaports and from there to the rest of the world. The Saudi land bridge project will cost about $11 billion and will provide a new link between the existent railway in the eastern …

The Effect Of Inflation And The Pandemic On A Southern California Solar Company: A Case Study, Adrian Avila

Construction Management

Supply chain issues are causing panic in certain sectors of the economy particularly the solar sector. Solar energy already has problems that can affect its growth in the long term such as lack of government incentives, high cost, and energy curtailment. These problems are becoming more pronounced as the pandemic is prolonged. California is a state that has been encouraging the use of solar energy and has introduced incentives for its citizens to install solar. Because of this, solar companies in California may be able to more adequately circumvent issues and better excel economically than companies in other states. In …

Use Of Industrialized Construction Within Mechanical Contractors Association Of America, Nathan M. Yi

Construction Management

It is a constant battle in the construction industry to improve productivity and efficiency while keeping the cost and schedule as low as possible. This can be made possible through the use of industrialized construction strategies such as, prefabrication, building information modeling (BIM), and automation. In this study, the main purpose of this survey was to collect information about MCAA firms’ knowledge of industrialized construction strategies, their use of them in the past, and their willingness to use them in the future. It also aims to explore the use of industrialized construction and its viability as a path for mechanical …

Caed Hasslein Student Competition, Greta R. Stout

Construction Management

This paper outlines the development of the first CAED Hasslein Student Competition at Cal Poly, SLO. The College of Architecture and Environmental Design at Cal Poly, SLO has not yet been successful in creating a platform to engage students of all five majors to collaborate in an educational atmosphere. This project aims to challenge students to work in teams made up of all five disciplines in a Request for Proposal-style competition. This paper focuses on how the idea of this competition came to be and the steps that were taken to successfully write the competition problem statement. These steps included …

Shabang Music Festival Seating, Carter L. Norton

Construction Management

This outlines the process of the building and installation of four shaded seating areas at the SHABANG Music Festival located at Laguna Lake Park in San Luis Obispo. This paper places an emphasis on the pre-construction elements of the building stage. SHABANG Music Group rented out a section of Laguna Lake Park to host a music festival designed to bring the San Luis Obispo community together. The goal of the project discussed was to build a raised VIP seating area facing the main stage on which music lovers could relax while still being able to enjoy an unobstructed view of …

Sustainability In Construction Practices As Emphasis On Environmental Investing In Esg Model Grows, Maddie Heal

Management Undergraduate Honors Theses

The purpose of this research is to emphasize the importance of growing investment on environmental initiatives in business ESG models in regard to sustainable practices in construction. The ESG acronym is known as the environmental, social, and governance efforts that businesses strive to incorporate in their models to increase the responsibility of operations.

Investors continue to seek out responsible businesses when choosing which ventures to pursue. The analysis of the current construction crisis, current investments in the right direction of Eco-friendly design regarding construction, and the threats and benefits incentivizing those investments elucidates the need to emphasize socially responsible investment …

Precast Concrete Manufacturing Business Plan, John F. Will Jr.

Construction Management

The Central Coast of California has been under development since the Great Recession of 2008. Throughout this development, there has been an exceedingly high demand for precast concrete products, specifically in the civil sector of the construction industry. These products are being utilized by more and more by contractors around the world. This demand has emerged from the lack of concrete product manufacturers in this region of California. This project introduces a business plan for a new precast concrete product manufacturer by the name of J.W. Concrete Products LLC. The objective of this business plan is to reflect the benefits …

The Professional Constructor, Full Issue, Volume 47, Number 01

The Professional Constructor

No abstract provided.

Current State Of The Workforce Demographics And Knowledge Transfer Strategies In The Southeast United States, Vivek Sharma, Dhaval Gajjar, Kapil Madathil, David Davis, Shreyas Patel

The Professional Constructor

The construction industry is a very diverse industry due to the unique nature of projects and expertise within various construction companies driven by multiple regional/national factors. The United States Department of Labor reported 44% of the current US employed population will be above 65 in eleven years by 2028, making workforce studies and knowledge transfer a key driver in leading construction business models. This study conducted an in-depth investigation in the southeast region of the US on the current state of workforce demographics and the need for knowledge transfer within the ranks of management coupled with trade personnel. The study …

Perceptions Of Remote Work Within The Construction Industry Resulting From The Covid-19 Pandemic In The South Central United States, Sara B. Overturf, Ben Bigelow, Matthew Reyes

The Professional Constructor

Working remotely became increasingly popular over the previous two years, given organization’s need to rapidly adjust to changing conditions as a result of the Coronavirus. It allowed companies to more easily adapt to stay-at home orders and create a safer environment for their employees. While working remotely can have a positive impact on employees, there are also challenges to overcome for both employees and organizations. This study focused on understanding both the prevalence and implementation of remote work within the commercial Construction industry to face the professional challenges resulting from the Coronavirus. This paper provides insight into companies that have …

Educating The Construction Client: Training Strategy For Buyers Of Commercial Design And Construction Services, Michael J. Emmer

The Professional Constructor

Business owners can face a myriad of challenges when venturing into a new construction project. Most of the design and construction process is unfamiliar territory as compared to their customary business operations and owners face a wide assortment of issues when making the decision to build a new facility. Consequently, the majority of owners are entirely out of their business element when deciding to enter into the undertaking of a new building project. Since most of the risk with any given project rests with the Owner, better training and strategies for owners will lead to a higher likelihood of project …

Using Flight Simulation As A Convenient Method For Uas Flight Assessment For Contractors, Colin Dees, Joseph M. Burgett

The Professional Constructor

Operating an unmanned aircraft system (UAS) for commercial purposes in the United States requires the pilot to pass the Federal Aviation Administration’s (FAA’s) knowledge exam to earn their UAS license. The exam does not include a practical component where flight proficiency is assessed. This represents a source of risk for contractors if flight proficiency is not evaluated in another way. The National Institute of Standards and Technology is a federal agency and has developed the Basic Maneuvering Test (BMT). It is the only nationally recognized UAS flight proficiency exam. While not required, the construction industry can benefit by using this …

Impact Of Covid-19 On Sense Of Community / Student Engagement, Aaron Sauer, Richard Gebken, Richard Bruce

The Professional Constructor

The spring of 2020 was a time of unprecedented change for higher education institutions. The COVID-19 pandemic forced schools to re-think instructional delivery and the undergraduate experience as they implemented measures to protect students, faculty, and staff. Unraveling the impact of the pandemic on higher education will take many years. This study investigated how the institutional response in the return to campus following the pandemic influenced sense of community, a component of student engagement. A previously developed instrument was delivered at two construction management programs in the U.S. Midwest before and after the pandemic. The two schools were similar in …

Construction Management Students Using Technology In The Field, Anthony D. Bongi

Construction Management

This research paper examines the affect technology has had on the desire for college graduates to pursue a career in the field. The idea of college graduates entering directly into a field leadership position was contemplated and discussed. Historically, soft skills such as leadership and communication have been the predominate attributes of any worker expected to run construction in the field. While the importance of these skills hasn’t changed, the importance of technological skills has increased to be considered alongside soft skills. Through an anonymous survey of industry professionals with 10+ years of experience as well as interviews of two …

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson

CSU Journal of Sustainability and Climate Change

Universities across the United States are generating goals to be more sustainable and carbon neutral. The energy used in existing buildings on campuses amount to a large volume of greenhouse emissions and must be reduced to help achieve neutrality goals. Strategic Energy Master Plans are instrumental to support these goals through the development of recommendations to reduce energy. Calculating the energy use intensity for existing buildings, a main component of a Strategic Energy Master Plan, can help the campus understand where energy is being used the most. With this information the highest energy consuming buildings can be the focus of …

Adapting Through Organizational Change In Capital Projects Organizations, Mahmoud El Jazzar

Theses and Dissertations--Civil Engineering

Organizational change can be defined as an alteration of a core aspect of an organization’s operation, structure, or culture. Previous research on organizational change mainly has focused on different types of technical changes, such as alternative project delivery methods and strategies to adopt the design-build approach successfully. Also, previous studies have focused on the project level changes instead of organizational level responses. Here I show using a proposed change model and performing thematic, and analysis, that there exist common responses, and challenges across different types of capital projects organizations studied. The results show that responses to change will differ as …

Sustainability In Commercial Office Buildings, Jack Cullen

Construction Management

Sustainability in the construction of commercial structures has been expanding through the recent years, largely in part due to the increasing ambitions to maintain a green and healthy planet. Regulations for including sustainable features in new or renovated commercial buildings have been growing throughout the country. In fact, many prospective buyers and lessees are even adding sustainable features to the list of what they look for in a potential place to buy or rent. This report will explore whether or not a building’s sustainable aspects appeal to buyers and lessees of commercial buildings, and if these sustainable aspects contribute to …

Modular Interior Partitions In Commercial Housing: A Case Study, Adam David Meleo

Construction Management

The ability to modify an interior space with ease and reasonable cost is beneficial to designers, owners, and end-users. Modular interiors are not a new concept. Modular interior partitions can come in the form of Japanese Shoji screens, as well as folding walls that would be found in a convention center. While not new in concept, the market for products that allow partitioning an interior space with ease appears to be growing with the introduction of innovative products and solutions. This paper will focus on two student housing projects in San Luis Obispo, California, with regards to their design and …

The Professional Constructor, Full Issue, Volume 46, Number 02

The Professional Constructor

No abstract provided.

Evaluation Of In-Cab Air Quality For Nonroad Diesel Construction Equipment, Phil Lewis, Sherif El Khouly, Adam Mayer, Jeremy Johnson

The Professional Constructor

Previous research indicates that air quality near the cabs of nonroad diesel equipment may exceed recommended exposure limits for certain pollutants. The objective of this case study was to collect and analyze air pollutant data near the cabs of nonroad diesel equipment while performing real world activities. Using state-of-the-art instrumentation, the research team conducted 24 tests on nine different items of nonroad equipment. The team collected data related to pollutant concentrations of carbon monoxide, carbon dioxide, nitric oxide, nitrogen dioxide, particulate matter, and black carbon. Average concentrations of carbon monoxide and nitric oxide did not exceed published exposure limits on …

Prefabrication In Buildings With Focus On Emerging Mep Rack Systems, Mark Daniels, M.G. Matt Syal

The Professional Constructor

The growth in technology and automation has influenced the construction industry to explore prefabrication alternatives in building design and construction. In addition, the shortage of skilled labor is accelerating the push for the adoption of prefabrication in building industry. This paper provides an overview of the present construction market and labor trends and summarizes various levels and categories of prefabrication. It then provides detailed information on an emerging MEP prefabricated solution known as the MEP rack systems. The implementation of the MEP rack systems is discussed with the help of a hospital case study project. It concludes with the discussion …

Case Study Of Using Unmanned Aircraft Systems To Support Bridge Inspections, Joseph M. Burgett, Gurcan Comert

The Professional Constructor

This paper presents the results of a case study conducted to evaluate the potential benefit of unmanned aircraft systems (UAS), commonly referred to as drones, as a tool to improve the bridge inspection workflow. The study conducted two experiments to determine how well deficiencies could be detected using a UAS. Both experiments were conducted using the same test bridge. The first experiment was carried out by the bridge inspection engineers (BIEs), who had previously inspected the bridge using traditional methods. They used the drone to search for inspection points identified in the inspection report. The second experiment was conducted by …

Stick Built Vs. Panelize Wall/Truss Framing For New Home Construction: A Time Study Labor Comparison., Eric A. Holt, Jim Anzlovar, Alexander Welsh

The Professional Constructor

Due to many trends in the construction industry (material cost increase, labor shortages, supply chain issues, pandemic, market demand outpacing supply), the homebuilding industry is looking for alternative ways to frame homes. In response to the National Housing Endowment (NHE) Request for Proposal, the researchers reviewed the literature on the housing market’s current state regarding the scale and scope of the skilled construction framers shortage and the current market share of single-family framing method; stick-built vs. panelization. Working with industry part ners, the team analyzed time studies for multiple new home builds. It was found that panelized wall framing systems …

Minority And Female Participation In Construction Industry Apprenticeship Programs, Richard Bruce, Aaron Sauer, Patrick Sells, Curtis Bradford

The Professional Constructor

According to the U.S. Bureau of Labor Statistic’s Current Population Survey, nearly 90 percent of the 10.7 million people employed in the construction industry are white males (2021). This statistic will remain unchanged unless more minorities and females are recruited into the industry. For craft workers, a primary recruitment mechanism is the registered apprenticeship program. This study analyzes the U.S. Department of Labor’s Registered Apprenticeship Database (RAPIDs) from 2000 to 2019 to identify trends for new apprentices. The study found that there was no change in the proportion of new female apprentices in the previous 20 years and no change …

Impact Of Personality Traits And Team Criteria On Construction Team Performance, Arlys Silva Payne

LSU Doctoral Dissertations

This dissertation investigated how personality traits and team criteria influence team performance in real construction projects. Though personality influence on team performance has been significantly investigated in other business sectors, the literature revealed that the construction industry lacks investigations regarding personality influencing team performance. The existing literature revealed that the Big Five Factors (BFF) was the most popular assessment tool for personality. Thus, this dissertation adopted the 50-Item Personality questionnaire developed by Goldberg, which consited of extraversion, aggreeableness, conscientiousness, neuroticism, and openness to experience. The literature also revealed several common team criteria to evaluate team performance: team member satisfaction, shared …

Outsourcing Vdc Workflows, Kyle K. Bresnahan

Construction Management

In an increasingly demanding world for infrastructure, technological methods have been found to assist construction project's. As innovative construction methods are constantly increasing, so is the demand for technological needs within the architecture, engineering, and construction (AEC) industry. To ensure technological adoption, many countries have started to mandate higher levels of building information modeling (BIM) documentation beyond the 2D construction documents traditionally required throughout construction review and permitting. Some companies have capitalized on this change to the extent of making BIM their primary business. These companies focus solely on virtual design and construction (VDC) and determine whether clients lacking this …

The Professional Constructor, Full Issue, Volume 46, Number 01

The Professional Constructor

No abstract provided.

How New, Innovative Technology Can Be Implemented To Combat The Construction Industry Labor Shortage, Noah David Jackson

The Professional Constructor

This essay addresses the construction industry’s need to compensate for the current and projected labor shortage through innovative technologies. In the first portion of this essay, three technologies that are most feasible for implementation – the Internet of Things (IoT), Drones, and Prefabrication – are detailed. The challenges faced are then discussed before the second major portion in which steps for implementation are outlined. These steps include forming partnerships, learning the process, communicating, training, implementing, and adapting and improving. The essay concludes with a discussion of how the AGC organization, and members within, can aid the industry in meeting this …

The Adaptative Construction Industry, Rhett Cox

The Professional Constructor

The construction industry is an industry that always unites to find ways to solve problems. It is very complex and requires considerable organization, hard work, specific skills, and a whole lot of determination. In this paper, I will discuss three ways that the industry is making strides to make construction better and more efficient: (a) increased use of modular construction and prefabrication, (b) use of drones, and (c) Building Information Modeling (BIM) use. With the construction process becoming more and more complex, improving efficiency and safety has gained more attraction, especially when coping with fundamental issues such as labor shortage, …