Civil Engineering Commons^™

A Four-Step Thermocatalytic Route For Converting Co2 Into High-Purity Oxalic Acid, Hao Feng, Muhammad Kashif Khan, Lei Li, Hongyan Ma, Xinhua Liang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This research outlines a four-step methodology for transforming CO₂ into high-purity oxalic acid. CO2 was first sequestered as KHCO₃ through its reaction with aqueous KOH, followed by hydrogenation using a supported AgPd/CNT catalyst in a batch reactor at an initial H₂ pressure of 60 bar and a temperature of 150°C. The formate yield reached 91.8% at optimum conditions. Potassium formate in the solid state was thermally coupled in the presence of KOH at 400°C under N2 flow, yielding potassium oxalate of up to 76% yield. The final step was the selective precipitation of potassium oxalate with ferrous …

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

Selective Lithium Extraction Using Ion-Sieves From Geothermal Brine, Agyare Asante, Abigail Berardi, Jayla Standin, Elliott Walker, Ujjwal Pokharel, Sandeep Kumar

Graduate Student Government Association Research Conference

Lithium (Li) is a critical component in modern green energy technologies, serving as the cornerstone for advanced batteries used in electric vehicles, renewable energy storage, and portable electronics. To address the increasing global demand for lithium, this study explores the synthesis and performance of ion-sieve novel adsorbents derived from the spinel-type precursor Li₄Mn_4.5Zr_0.5O₁₂ (LMZO). The precursor was produced using an economical solid-phase reaction that involved lithium, manganese, magnesium, and zirconium salts. This was followed by a two-stage calcination process involving 200 K for 2 hours and 450 K for 24 hours. Acid activation …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

An Experimental Study On Mixed Hydrocarbon Gas On Transport Through Subsurface And Atmospheric Interfaces With Application To Natural Gas Pipline Leak Dection And Quantification, Richard Kolodziej

Civil and Environmental Engineering Theses and Dissertations

Natural gas (NG) production and usage as a fuel source have surged in recent years, becoming a critical component of the global energy system and requiring extensive belowground pipeline infrastructure. Leaks in belowground pipelines release fugitive methane (CH₄) emissions, posing significant environmental, safety, and economic risks. Effective leak detection and quantification (LDAQ) methods are essential for identifying and measuring leaks to enable timely repairs and accurately address these threats. However, few studies have characterized the effectiveness of current and advanced LDAQ survey methods for belowground NG pipelines, with existing work often limited to technology-centric evaluations or studies of …

Microplastic Abundance And Removal In Stormwater Using Green Infrastructure, Meghana Parameswarappa Jayalakshmamma

Dissertations

Microplastics (MPs) are increasingly recognized as a pervasive environmental contaminant, conveying other contaminants, accumulating in aquatic organisms, and posing ecological risks. The existing research has primarily focused on MPs in wastewater treatment plant effluents in surface waters. However, the role of stormwater systems in MP transport has been less explored. Given the rise in MPs from urban sources, stormwater runoff from urban areas may serve as a critical conduit for transporting land-based MPs into aquatic environments. Green infrastructures (GIs) have been recognized for mitigating flooding and improving water quality from minor storms by trapping stormwater pollutants. Yet, the capability of …

Synthesis Of Geopolymer Using Coal Fly Ash And Corn Stover, Anu Paneru

Master's Theses

The development of each nation is dependent on its infrastructure, and nations are competing with others in infrastructure, especially in the construction of roadways, since they play a vital role in the economic and social development of the nation. The conventional materials used for road construction are cement and asphalt, which pose significant environmental challenges. This thesis explores the potential of fly ash (FA) and corn stover (CS) in synthesizing geopolymer, as an alternative material for the construction of roads. The study examines the impact of FA and CS percentages and the particle sizes of CS on the compressive strength, …

Smart Manufacturing Of Cement: From Lab-Scale Simulation And Testing To Industry-Scale Deployment., Juan David Tabares Tamayo

Electronic Theses and Dissertations

Cement kilns are controlled by experienced process operators who follow experience-based industry guidelines using data collected and fundamental knowledge. The manufacturing process, which is equipped with sensors and equipment, transfers data/information to the operators to aid standardized decision-making operations. In contrast, companies have used such data to develop and implement digital solutions for predictive control systems; in effect, FLSmidth and Rockwell Automation. However, despite the availability of automated control systems and investigation in automation for process monitoring and optimization, opportunities to radically optimize cement manufacturing are still abundant and in need of implementation. Therefore, this research developed simulation models and …

Quasi-Static And Impact Load Response Of Bfrp-Reinforced Concrete Beams And Post-Terrorist-Attack Sub-Assemblages, José Luis Carrasquillo

Civil & Environmental Engineering Theses & Dissertations

This dissertation presents the outcome of a theoretical and experimental study of Basalt Fiber Reinforced Polymer (BFRP) reinforced concrete beams and post-terrorist-attack subassemblages subjected to either quasi-static or impact load. Both BFRP reinforcement as well as BFRP fabric are used in this investigation. The sub-assemblage consists of an otherwise two-span beam converted to a fixed-end single-span one owing to the loss of a middle column blasted off during the terrorist attack. The simply supported beams are subjected to a midspan quasistatic or an impact load. However, each sub-assemblage is subjected to a quasi-static load up to collapse to simulate the …

Thermo-Elasto-Plastic Stability Of Biaxially Loaded Hollow Rectangular Section Steel Beam-Columns With Applied Torsion, George Adomako Kumi

Civil & Environmental Engineering Theses & Dissertations

Presented herein is an experimental and theoretical study of biaxially loaded hollow rectangular section steel beam-columns with applied torsion at elevated temperatures. The theoretical analysis is based on a system of simultaneous materially nonlinear differential equations of equilibrium for which an iterative semi-analytic solution approach is formulated. Although the primary goal of this research is to study the influence of elevated temperatures on the steel member with the complex loading, rigorous analysis is also conducted of the member at ambient temperature for comparison. The experimental part of the study involves conducting tests on the members at both ambient and high …

Determination Of Spore Viability In Concrete Across Several Factors Using Most Probable Number, Samuel Boyer

Williams Honors College, Honors Research Projects

To determine the lowest concentration of spore added to polyurethane-cement composite (PUCCO) particles that can still germinate after curing in concrete. This research project is a small addition to the larger research project being undertaken by Mirza Mohammed Rashiduzzaman for his Masters. The larger project involves the use of fungal spores added in concrete to act as a self-healing component when cracks form in the concrete structure over time. These spores are suspended in a protective oil and loaded into small, hardened sponge-like PUCCO cubes to act as growth points when water and air can reach the PUCCO in the …

Isolation And Characterization Of Caffeine-Degrading Bacteria From Coffee Plantation Areas In Malaysia, Elvina Clarie Dullah, Mohd Fazli Farida Asras

Makara Journal of Technology

Decaffeination by microbial degradation is currently the most optimal and low-cost approach, involving only microbial cells and/or their enzymes. The bacterium was characterized using a series of biochemical tests. Positive results were obtained from carbohydrate fermentation, citrate utilization, and catalase tests, while negative results were obtained from Voges-Proskauer (VP) and indole tests. Three different caffeine concentrations of 0.25%, 0.4%, and 2% were tested and measured through Gas Chromatography-Mass Spectrophotometry (GC-MS) analysis. The highest caffeine reduction (89.25%) was found when 0.25% caffeine was used in the media. Only a small amount of caffeine was reduced to 0.4% and 2%, with 34.78% …

Optimization Of The Building Envelope And Roof Shading To Reduce The Energy Consumption Of College Low-Rise Buildings In Indonesia, Nasruddin Nasruddin, Azimil Gani Alam, Mohammad Imroz Sohel

Makara Journal of Technology

Energy consumption in buildings is a crucial concern globally, prompting researchers to explore innovative solutions to mitigate its impact. This study investigates the optimization of building envelopes and roof shading systems of existing buildings in Indonesia to realize notable energy savings. Multiple scenarios were explored, with modifications to building envelopes and roof shading, highlighting the overall thermal transfer value as a key parameter. Using EnergyPlus simulations, the efficacy of natural ventilation in corridors and roof shading modifications was assessed in reducing energy consumption. The findings revealed that renovating existing buildings by optimization of the building envelope and roof shading by …

Assessment Of Spatial Variability Of Groundwater Potential Using Remote Sensing And Gis-Based-Criteria Evaluation For Dar Es Salaam, Tanzania, Augustina Alexander

Tanzania Journal of Engineering and Technology (TJET)

Groundwater is an important resource for the continuous provision of water supply in both urban and rural areas. Lack of enough knowledge about the spatial variability of groundwater potential zones (GWPZS) has a negative impact on groundwater extraction development and management and may result into over exploitation. In this study, analytic hierarchy approach (AHP)-coupled with multi criteria decision analysis (MCDA) and GIS techniques were employed to integrate hydrogeological, geological as well as topographical data to assess spatial variability of groundwater potential zones of Dar es Salaam city. Seven thematic layers such as lithology, slope, land-use, lineament, drainage, soil, and rainfall …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Assessments Of The Application Of Earned Value Management System For Construction Project Performance Measurement In Zanzibar, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

Many construction projects in developing countries including in Zanzibar suffer from time and budget overruns. The Revolution Government of Zanzibar established different bodies such as Zanzibar Contractors Registration Board (ZCRB), Zanzibar Architects, Engineers and Quantity Surveyors Registration Board (ZAEQRB), Zanzibar Public Procurement and Disposal of Public Asset Authority (ZPPDA), among others with the aim of controlling the performance of project. Often scope creep, time and cost overruns are very common problems in construction projects. This study aims at addressing those problems by assessing the use of Earned Value Management (EVM) methodology in measuring construction industry performance in Zanzibar. The study …

Exploring Current And Future Research Trends On Safety Climate In Construction Projects, Kamugisha Joseph Kajumulo

Tanzania Journal of Engineering and Technology (TJET)

Clients, consultants, and contractors in the construction industry can benefit from a safety climate by obtaining knowledge of attitudes and perceptions for better safety outcomes. However, the current and future research trends for safety climate in construction projects have not yet been fully examined. In order to solve this problem, a systematic review of previous research findings using a social network approach must be conducted, and future trends for the safety climate in building projects must be identified. Sixty-three peer reviewed articles were gathered to study the literature on safety climate in construction projects. A social network approach was employed …

Current And Future Trends Of Construction Project Performance Models: A Review, Method Mtana

Tanzania Journal of Engineering and Technology (TJET)

The construction industry (CI) has experienced outstanding growth and contributed to economic growth for many countries, with enormous foreign investments that require quality projects. High pressure to reduce the construction cost and time commonly put the industry at risk of lower quality and safety of the construction facilities. Like many other developing countries, Tanzania needs more stringent quality control measures in the construction sector to contribute positively to sustainable growth. This study thus reviews current and future trends in construction industry performance in Tanzania. The literature review on construction projects (CPs) performance is based on information on time overruns from …

A Chemical Study Of Archaeometallurgical Ceramics From Southwestern Tanzania, Edwinus Lyaya

Tanzania Journal of Engineering and Technology (TJET)

Archaeometallurgical ceramics, including furnaces, tuyères, and potteries, were required for successful pre-industrial iron smelting and refining. However, there are limited chemical studies on archaeometallurgical ceramics in Tanzania. This paper examined the nature of clay source in terms of refractoriness, determined whether there were multiple clay sources, and verified the refractoriness of the archaeometallurgical ceramics. An x-ray fluorescence (XRF) analytical technique and experimental re-firing of the archaeometallurgical ceramics were employed. The chemical data clustered in the mullite region on the Al2O3-SiO2-FeO ternary system indicate that iron smelters and refiners chose refractory clay sources for making archaeometallurgical ceramics. Small range and standard …

Damage Stability Study Of A 500 Dw Ro-Ro Ferry Vessel, Zulfaidah Ariany, Budhi Santoso, Sarwoko Sarwoko, Nauval Abdurrahman Prasetyo

Makara Journal of Technology

The development of the crossing transportation industry is currently increasing in the island areas. The use of Ro-Ro type ferry boats is extremely efficient in moving people, goods, and vehicles. The current research focuses on the damage stability of the 500 DWT Ro-Ro ferry, which aims to meet the needs of the Ro-Ro ferry in the archipelago area. The previously existing initial design of a barge hull with a main size Lpp = 40.15 m, B = 12 m, H = 3.2 m, and T = 2.15 m was used to analyze the damage stability condition further. First, the drawings …

Understanding Unsteady Corner Separation Within Wing-Body Junction Flows, Paul G. Winner

Doctoral Dissertations and Master's Theses

Wing-body junction flows, formed at the interface between a wing and fuselage surface, are a complex, coupled, three-dimensional, turbulent flow field. This thesis focused on the unsteady corner separation that develops at the trailing edge of this wing-body junction under certain conditions. A NACA 0015 wing mounted on a flat plate at an angle of attack of 13°was used as the model junction flow field. The wing had an aspect ratio of 8 with a linear washout twist of 15°. The Reynolds number based on the wing chord was Re_c = 4.5 × 10⁵. Time-dependent stereoscopic particle …

Evaluation Of Material Request Order To Support Sustainable Construction, Fajar Susilowati, Nur Nahdiah Anggraeni

Makara Journal of Technology

This study was conducted on one of Indonesia’s apartment projects, in which reinforced concrete is the main structure. Based on existing project data, this project experienced a decline in the construction work’s progress, thus reducing the project’s overall progress. This decline occurred because the delivery of concrete reinforcement material was delayed. This study aimed to determine the process of material request order and its relationship with the work implementation, as well as the factors that influenced the delayed arrival of concrete reinforcement material at the project site. The method used in this study was observation and interview. Data were analyzed …

Evaluation Of Aluminum Dissolution, Current Density, And Pitting Patterns During Electrocoagulation, Monica Castro Carias

USF Tampa Graduate Theses and Dissertations

Electrocoagulation (EC) is a sustainable water treatment process involving the generation of coagulants on-site through the application of a voltage on metal (usually aluminum or iron alloys). The factors that impact EC system performance have been well researched, however further research is needed on the factors that impact anodic dissolution of aluminum electrodes, especially when the technology is transferred to full-scale applications. Electrode fouling is one of the factors that can impact dissolution of the anode during EC due to the formation of a protective oxide/hydroxide layer on the electrode surface. Previous studies have addressed electrode fouling by reversing polarity, …

Mechanical Behavior Of Clay Soil Stabilized With Fly Ash And Bottom Ash, Soewignjo Agus Nugroho, Azra Zulnasari, Ferry Fatnanta, Andius Dasa Putra

Makara Journal of Technology

Soil is one of the most important aspects of an infrastructure given its functions of receiving and holding structural loads. However, not all soils have good physical and mechanical properties. To overcome those conditions, stabilization of the soil is practiced to meet the technical requirements. This study aims to determine the behavior of high plasticity clay stabilized with lime, fly ash, and bottom ash. These additives can be used as a stabilizing agent to increase soil strength. The percentage of additives varied from 5%–25% then mixed with clay and were tested through the (Unconfined Compression Strength (UCS) test. The UCS …

Enhancement Of Biogas Production Through Solid-State Anaerobic Co-Digestion Of Food Waste And Corn Cobs, Lukhi Mulia Shitophyta, Anisa Salsabila, Firanita Angraini Putri, Siti Jamilatun

Makara Journal of Technology

Although biogas has been primarily produced through liquid anaerobic digestion, this method leads to the floating and stratification of fibers and non-homogeneous mixing, which can reduce the biogas yield. Alternatively, biogas can be produced by the solid-state anaerobic digestion (SS-AD) of organic material with a high solid content, such as corn cobs. We investigated the co-digestion of food waste and corn cobs as a biomass feedstock for SS-AD in biogas production. We measured the effects of the total solid (TS) content, percentage of food waste, and reduction in volatile solids (VS), from which we determined its appropriate kinetic model. We …

Control Strategy For Solar Energy-Saving Lamps For Optimized Energy Utilization And Sustainability Of Operation Durability: Indonesia Case, Burhanuddin Halimi, Agus Purwadi, Nana Heryana

Makara Journal of Technology

To solve the electrification ratio issue, the Indonesian government has promoted the use of solar energy-saving lamps. This study proposes a control strategy that adopts current reference time-based profiling for solar energy-saving lamps. For optimal energy consumption, the current reference profile is determined according to users’ daily energy requirements. From the aspect of user comfort, a gradual step reference profile is also introduced to provide a subtle change in lighting intensity level. The proposed control strategy can minimize energy consumption and optimize the operation durability of the system. The concept is verified by simulating four scenarios, the results of which …

Shale Softening Based On Pore Network And Laboratory Investigations, Di Zhang

Dissertations

This dissertation consists of two major parts: Firstly, experimental investigation of four major shale softening mechanisms and quantifications of structural parameters. Secondly, numerical simulations of nano-scale flow behaviors using the previous experiments determined parameters based on modified pore network modeling.

Hydraulic fracturing is widely applied to economical gas production from shale reservoirs. Still, the gradual swelling of the clay micro/nano-pores due to retained fluid from hydraulic fracturing causes a gradual reduction of gas production. Four different gas-bearing shale samples are investigated to quantify the expected shale swelling due to hydraulic fracturing. These shale samples are subject to heated deionized (DI) …

Comparison Of Concrete And Steel Jacket Methods For Reinforcing A Concrete Bridge Pier By Numerical And Experimental Studies, Hadi Faghihmaleki

Makara Journal of Technology

Various rehabilitation and strengthening procedures have been developed in recent decades. A study to determine which methods can be implemented to increase the useful life of the bridge before strengthening must be performed. In this study, the seismic behavior of a reinforced concrete bridge pier with dimension 3.5 × 3.5 m, which was reinforced by two steel and a concrete jacket, was investigated. Nonlinear geometric models and materials were analyzed to estimate the seismic parameters of the pier. Results show an increase in energy absorption, ultimate strength, and ductility for the steel jacket, as well as a greater increase in …

Effect Of Arc Plasma Sintering On The Structural And Microstructural Properties Of Fe-Cr-Ni Austenitic Stainless Steels, Parikin Parikin, M. Dani, A. Dimyati, N. D. Purnamasari, B. Sugeng, M. Panitra, A. Insani, T. H. Priyanto, S. Mustofa, Syahbuddin Syahbuddin, A. Huang

Makara Journal of Technology

X-ray diffraction techniques were performed to determine the actual crystal structure of A2 austenitic stainless steel (ASS) as-cast and A2 ASS after arc plasma sintering (APS) for 2 s. Computations were conducted on the basis of the Bragg arithmetic formula by comparing the S2 arithmetic with the interplanar spacing. The Bragg arithmetic formula is a simple series for the determination of the crystalline phase of materials based on the Miller indices of cubic shapes or other shapes. A2 ASS as-cast was identified to have a crystal structure of face-centered cubic with lattice parameter a = 3.58 Å. A similar crystal …

Trend Significance Levels Of Rain Onset And Cessation And Lengths Of The Wet And Dry Seasons In Epe, Lagos State, Nigeria, Adekunle Adedeji Alli, Olorunwa Eric Omofunmi

Makara Journal of Technology

This study aims to reduce crop failure resulting from a dry spell, which is the first occurrence of unsustainable rainfall that deceives farmers into planting. Thus, trends need to be tested using hypothesis, kurtosis, and other statistics to analyze the risks associated with unstable planting calendars and their possible mitigation strategies. The daily rainfall data from 1982 to 2018 were obtained from the archive of NASA/POWER SRB/FLASH, and the research location is Epe, Lagos State, Nigeria, which lies at latitude 6.585° N and longitude 3.962° E. Microsoft Excel was used to perform the tests. Results show that the null hypothesis …