Civil and Environmental Engineering Commons^™

Evaluation Of Floorpan Tearing And Cable Splices For Cable Barrier Systems, Scott K. Rosenbaugh, Jason A. Hartwell, Robert W. Bielenberg, Ronald K. Faller, James C. Holloway, Karla A. Lechtenberg

Nebraska Department of Transportation: Research Reports

This research effort consisted of two objectives related to components of a prototype cable barrier system. The first objective was to mitigate the potential for vehicle floorpan tearing by modifying the cable guardrail posts. A bogie vehicle was equipped with a simulated floorpan designed to replicate the height, thickness, and strength of the floorpan of a Kia Rio vehicle. Baseline testing demonstrated that the top of the Midwest Weak Post (MWP) would contact, and crease the simulated floorpan, which matched the damage observed in actual full-scale vehicle crash tests. Once the test setup provided the desired results, various post configurations …

Mash Test No. 3-10 Of A Non-Proprietary, High-Tension Cable Median Barrier For Use In 6h:1v V-Ditch (Test No. Mwp-8), Dylan T. Meyer, Karla A. Lechtenberg, Ronald K. Faller, Robert W. Bielenberg, Scott K. Rosenbaugh, John D. Reid

Nebraska Department of Transportation: Research Reports

The Midwest States Pooled Fund Program has been developing a prototype design for a non-proprietary, high-tension cable median barrier for use in a 6H:1V V-ditch. This system incorporates four evenly spaced cables, Midwest Weak Posts (MWP) spaced at 8 to 16 ft (2.4-4.9 m) intervals, and a bolted, tabbed bracket to attach three or four cables to the sides of each post. According to the Manual for Assessing Safety Hardware (MASH) testing matrix for cable barriers installed within a 6H:1V median V-ditch, a series of eight full-scale tests are required to evaluate the safety performance of a system. A ninth …

Length Of Need And Minimum System Length For F-Shape Portable Concrete Barrier, Robert W. Bielenberg, Dylan T. Meyer, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Portable concrete barrier (PCB) systems are often used to redirect errant vehicles through a combination of inertial resistance, lateral friction loads, and tensile loads developed from the mass and friction of the barrier segments. State departments of transportation (DOTs) and other end users may wish to utilize minimal length PCB installations to shield a hazard or work zone or limit the number of barriers required on the upstream and downstream ends to reduce overall system length. However, concerns with the performance of shorter PCB installations include increased lateral deflections and working widths and barrier pocketing. Additionally, no impact testing has …

Testing And Evaluation Of Mash Tl-3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, Jessica L. Lingenfelter, Justine E. Kohtz, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Three full-scale vehicle crash tests were conducted according to the Manual for Assessing Safety Hardware (MASH) Test Level 3 (TL-3) safety performance criteria on a transition between the Midwest Guardrail System (MGS) and a portable concrete barrier (PCB) system. The transition system utilized for test nos. MGSPCB-1 through MGSPCB-3 consisted of a standard MGS that overlapped a series of F- shape PCB segments that approached the MGS at a 15H:1V flare. In the overlapped portion of the barrier systems, uniquely-designed blockout holders and a specialized W-beam end shoe mounting bracket were used to connect the systems.

In test no. MGSPCB-1, …

Increased Span Length For The Mgs Long-Span Guardrail System Part Ii: Full-Scale Crash Testing, Dylan T. Meyer, John D. Reid, Karla A. Lechtenberg, Robert W. Bielenberg, Ronald K. Faller

Nebraska Department of Transportation: Research Reports

The objective of this research study was to design and evaluate the MGS long-span design for use with unsupported spans greater than 25 ft (7.6 m). Two full-scale crash tests were conducted to evaluate the MGS long-span system with increased span lengths and the use of UBSP posts adjacent to the long span. Both tests were conducted according to the TL- 3 criteria outlined in MASH. Both test nos. MGSLS-1 and MGSLS-2 were conducted with the 2270P vehicle impacting their respective critical impact points at a speed of 62 mph (100 km/h) and an angle of 25 degrees. Test no. …

Ls-Dyna® Modeling Enhancement Support, John D. Reid, Robert W. Bielenberg, Chaz Ginger

Nebraska Department of Transportation: Research Reports

The Pooled Fund Program member states provided funding for LS-DYNA modeling enhancements in Years 17 thru 22 (2006-2011), with a project period of 2006-2016. This report documents many of the modeling issues addressed throughout the project period. The funding has been effectively utilized to advance the current state-of-the-art for computer simulation and has provided the following benefits for the entire industry: (1) improved roadside safety hardware, (2) reduced development time and cost, (3) improved understanding of the behavior of roadside safety features, especially for impacts outside of normal crash test conditions, (4) improved LS-DYNA modeling techniques and procedures, and (5) …

Evaluation Of Tack Coating Practices For Asphalt Overlays In Nebraska, Soroosh Amelian, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

The strength of the bond between asphalt layers affects the lifespan of pavement structures. It is also a key factor in preventing major pavement distresses, such as slippage cracking and delamination. This research project evaluates and compares the effectiveness and performance of different tack coating approaches to ensure the proper bond strength is achieved in asphalt concrete (AC) interlayers through an experimental study. Various tack coat materials, including different types of emulsified asphalt and asphalt binders, at multiple application rates and dilution ratios were investigated. In the first part of this study, laboratory-prepared samples were used to evaluate the sensitivity …

Protocol To Evaluate And Load Rate Existing Bridges, Maria Szerszen, Ali Alhajami

Nebraska Department of Transportation: Research Reports

Load tests can be used to verify component and system performance under a known live load and provide an alternative evaluation methodology to analytically computed the load rating of a bridge. Procedures for nondestructive load testing, which involves field observations and measurements of in- service bridges and field testing often can revel additional capacity since analytical bridge rating tend to be fairly conservative. The goal of presented research was to develop a data-driven rating process to assess and rate bridges. This data-driven rating system reduces the subjective judgment of the bridge inspectors through the use of computer models and field …

Assessing Passenger Car Equivalency Factors For High Truck Percentages, Jianan Zhou, Laurence Rilett, Elizabeth Jones

Nebraska Department of Transportation: Research Reports

The Passenger Car Equivalent (PCE) values in the Highway Capacity Manual (HCM) 2010 might not be valid for western Nebraska freeway conditions. This is because: 1) Interstate 80 (I-80) experiences high truck percentages (25% to 60%), while the HCM provides PCE values up to 25% of the truck percentage; 2) the average speed of trucks are observed lower than passenger cars, which is incompatible with the HCM assumption that the free speed of all vehicle types is the same at level terrain; and 3) it is unclear whether the “average” truck used in the simulation study for PCE values in …

Laboratory X - Autonomous Vehicle Application, Nate Lant, Matthew Strong

Engineering Applications of GIS - Laboratory Exercises

Autonomous vehicles are currently the newest and hottest technology and show tremendous potential in making current transportation much more efficient. GIS is a key element in providing different mapping solutions and satellite assistance to support the cars in addition to their LIDAR and camera systems. Over the last few decades, different technologies have been integrated into cars to make them more user friendly--more autonomous. Recently, cars have been given a standardized range to categorize them into different levels of autonomy. The levels range from 0 to 5. Level 0 has no capacity of any autonomous technology; level 1 has cruise …

Laboratory Exercise – Frontrunner Extension, Meeya Apelu, Jordan Arrowchris, Joseph Browning

Engineering Applications of GIS - Laboratory Exercises

The Utah Transit Authority’s (UTA) FrontRunner is a commuter rail line that runs 89 miles through Weber, Davis, Salt Lake, and Utah counties. There are 16 different stops along this line which are: Pleasant View, Ogden, Roy, Clearfield, Layton, Farmington, Woods Cross, North Temple, Salt Lake Central, Murray Central, South Jordan, Draper, Lehi, American Fork, Orem and Provo (UTA 2017). Using the FrontRunner is easy and is very convenient. The popularity of this transit system is increasing and UTA has announced their future plans to continue the rail line. UTA is exploring ways to go forward with this plan and …

Life Cycle Assessment (Lca) Of Ore Transportation Route Alternatives For Eagle Mine, Soumith Kumar Oduru

Dissertations, Master's Theses and Master's Reports

Transportation sector at large is a major consumer of fossil fuels and constitutes more than a quarter of the global greenhouse gas emissions. When making infrastructure route and mode choice decisions for new freight-oriented projects, it is important that environmental and emissions considerations are included as an integral part of the selection process. Emissions from freight transportation projects related to mining and natural resource industry are especially critical, as they involve high volumes and tonnages often in pristine environments. The most logical time for emissions analysis is during modal and route analysis that are often conducted in the planning stage …

Measuring Access To Employment To Guide And Evaluate Public Transit Service Planning In New Orleans, Kevin Harrison

LSU New Orleans Theses and Dissertations

New software and technology is making it easier than ever before for public transportation planners to evaluate how quickly residents can reach jobs and other destinations. Because in the past it was difficult to measure access to opportunities, these concepts remained primarily in the theoretical and academic realms of research. This thesis reviews methods that could be used to evaluate routine bus service improvements and performs a comparative analysis of different methods in the context of New Orleans. There are many different variables in how the analysis could be performed, but this thesis focuses on the role that time of …

Development Of A Transition Between An Energy-Absorbing Concrete Barrier And A Rigid Concrete Butress, Tyler L. Schmidt, Ronald K. Faller, Jennifer D. Schmidt, John D. Reid, Robert W. Bielenberg, Scott Rosenbaugh

Nebraska Department of Transportation: Research Reports

From 2010 to 2015, MwRSF researchers developed the RESTORE barrier, which is a restorable MASH TL-4 median barrier with a steel and concrete rail supported by elastomer posts and steel skids. The research effort reported herein describes the initial development of a transition from the RESTORE barrier to a rigid TL-4 concrete buttress.

The previously-developed RESTORE barrier LS-DYNA model was validated against three full-scale vehicle crash tests. Several design concepts were generated through a series of brainstorming efforts. The primary transition concept consisted of a pin and loop connection between the RESTORE barrier and rigid concrete buttress, which was designed …

Modeling Economic Impacts Of The Inland Waterway Transportation System, Furkan Oztanriseven

Graduate Theses and Dissertations

The inland waterway transportation system of the United States (U.S.) handles 11.7 billion tons of freight annually and connects the heartland of the U.S. with the rest of the world by providing a fuel-efficient and environmentally friendly mode of transportation. This dissertation aims to create decision support tools for maritime stakeholders to measure the economic impacts of the inland waterway transportation systems under real world scenarios including disruptions, demand changes, port expansion decisions, and channel deepening investments. Monte Carlo simulation, system dynamics, discrete-event simulation, agent-based modeling, and multiregional input-output modeling techniques are utilized to analyze the complex relationships between inland …

Use Of Recycled Crushed Concrete (Rcc) Fines For Potential Soil Stabilization, Lindeman Mark, Varilek Brandon, Lieska Halsey, Rick Gloe, Maria Olomi

Nebraska Department of Transportation: Research Reports

This study evaluated the use of Recycled Crushed Concrete (RCC) Fines for potential soil stabilization. Soil stabilization is the enhancement of subgrade stability to improve the constructability of successive pavement layers. Use of RCC fines may not only provide less costly alternatives for subgrade stabilization, but their use may also alleviate landfill disposal challenges.

Transportation Rating Systems And Social Sustainability: A Comprehensive Analysis, Kelsey Lineburg

Senior Honors Projects, 2010-2019

The purpose of this study is to explore the social sector of sustainability in transportation design and engineering. Along with establishing a definition for social sustainability in transportation from existing literature, this document also includes a comprehensive analysis of current sustainability rating systems based on their evaluation of social sustainability metrics. The goal of this thesis is to inform transportation professionals about the existing social sustainability gaps in transportation literature and sustainability rating systems.

Social sustainability in transportation is comprised of two fundamental concepts: social equity and sustainability of community (Bramley and Power, 2009; Dempsey, 2009; McKenzie, 2004; Magis, 2010; …

Evaluation Of Poisson’S Ratio Of Asphalt Concrete, Elvis Alexander Castillo Camarena

Graduate Theses and Dissertations

Poisson´s ratio can be defined as the negative ratio of strains perpendicular to the load direction to the strains parallel to the loading direction. If elastic or viscoelastic models are used, Poisson´s ratio, together with elastic modulus, is a main input used to predict distresses in flexible pavement structures such as rutting and cracking. In asphalt concrete, Poisson’s ratio is commonly measured using two different testing configurations: indirect tension (IDT) and uniaxial. However, results from these two testing configuration can potentially have differences. Design methodologies such as the Mechanistic Empirical Design Guide (MEPDG, now PavementME) have been shown to be …

Evaluation Of Resistance To Rutting And Moisture Susceptibility On High Rap Content Asphalt Concretes Using Hamburg Wheel Tracking Device, Sungun Kim

GS4 Student Scholars Symposium

Reclaimed or recycled asphalt pavement (RAP) stands for materials that are removed and reprocessed asphalt pavement materials. It is usually from asphalt road maintenance and reconstruction. Past research has proved that the use of RAP will save natural resources by incorporating the old asphalt and aggregates into the new asphalt paving material production. This practice results in cost reduction in roadway construction and maintenance, and thus benefits both the agencies and the public. However, there is a concern over the strength and durability of the pavements containing high RAP content because the old asphalt binder and aggregates aged by traffic …

Evaluation Of Lightweight Pieces In Aggregates, Mark Lindemann, Doug Macke, Jim Wilken, John Ebito, Mark Hassler, Lieska Halsey, Bob Seger

Nebraska Department of Transportation: Research Reports

No abstract provided.

Automated Vehicles: A Guide For Planners And Policymakers, Charlie Coles

Master's Theses

Automated vehicles are those which are capable of sensing their environments in order to perform at least some aspects of the safety-critical control (like steering, throttling, or braking) without direct human input. As a guide for planners and policymakers, the objective of this thesis is to develop a strong foundation for anticipating the potential impacts resulting from advancements in vehicle automation. To establish the foundation, this thesis uses a robust qualitative methodology, coupling a review of literature on the potential advantages and disadvantages of vehicle automation and lessons from past innovations in transportation, with recent trends of the Millennial Generation, …

Bakken Crude Oil And The Changing Logistics Of The American Oil Industry, Austin Rau

Independent Research

The extraction of Bakken crude oil in the Williston Basin of North Dakota is transforming how petroleum is shipped. Before 2008, North American oil was carried primarily via pipeline from source regions to refineries along the Gulf Coast or to metropolitan areas close to consumers. The current pipeline system is ill-equipped to accommodate massive volumes of oil from this previously low producing region. Lack of infrastructure and high demand for “light tight oil” (LTO) led to the use of railroads as a means of moving the product to refineries across the nation. Transporting oil via rail over long distances was …

Laboratory Exercise — Safety On Roads, Elise Estep, Kyungmin Kim, Danielle Nixon

Engineering Applications of GIS - Laboratory Exercises

In transportation study area, safety is a great issue. GIS is appropriate to perform spatial analysis the accident history in define area. Specifically, GIS allow researchers to find an area or road segment that have high probability of any type of car accident such as Vehicle to Vehicle, Vehicle to Pedestrian, and Vehicle to Bicycle.

Reuse Of Aqueous Waste Streams For Transportation-Related Applications, Gregory L. Hansen

Electronic Theses and Dissertations

Aqueous waste streams produced from commercial, industrial, and municipal processes may be potentially reused for transportation applications. The objectives of this project were to identify potential transportation-related applications for aqueous waste streams available in South Dakota, develop guidance for the beneficial reuse of aqueous waste streams, and evaluate the reuse of MIEX® brine generated by the Watertown Municipal Water Treatment Plant (WMWTP). This study identified many aqueous wastes from municipal water and wastewater treatment facilities, industrial and agricultural processes in South Dakota that can be potentially used for ice and dust control. Beneficial reuse of these waste streams requires a …

Integrating Cobots In Engineering Technology Education, Ana M. Djuric, Vukica Jovanovic, Tatiana V. Goris, Otilia Popescu

Engineering Technology Faculty Publications

Collaborative robots or CoBots, unlike traditional robots, are safe and flexible enough to work harmoniously with humans. Exploiting the efficiency of automated operations and the flexibility of manual operations in one process can improve productivity and worker job satisfaction. CoBots technology has been experiencing strong growth in different areas such as ground transportation, food-processing industry, car manufacturing, and naval or aeronautical engineering. Current CoBots education and training opportunities are rare or non-existent in university environments. In response to this need, we developed several CoBots modules which will be integrated in the current robotics and mechatronics courses. In this paper we …

Java Based Visualization And Animation For Teaching The Dijkstra Shortest Path Algorithm In Transportation Networks, Ivan Makohon, Duc T. Nguyen, Masha Sosonkina, Yuzhong Shen, Manwo Ng

Civil & Environmental Engineering Faculty Publications

Shortest path (SP) algorithms, such as the popular Dijkstra algorithm has been considered as the "basic building blocks" for many advanced transportation network models. Dijkstra algorithm will find the shortest time (ST) and the corresponding SP to travel from a source node to a destination node. Applications of SP algorithms include real-time GPS and the Frank-Wolfe network equilibrium.

For transportation engineering students, the Dijkstra algorithm is not easily understood. This paper discusses the design and development of a software that will help the students to fully understand the key components involved in the Dijkstra SP algorithm. The software presents an …

Work In Progress -- Does A Technology-Rich Transportation Engineering Experiences Increase Interest In Civil Engineering, Marissa K. Orr, Sanjay Tewari, David E. Hall, Norman D. Pumphrey

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper examines whether a technology-rich transportation engineering experience generates interest among college freshman students towards transportation related degrees and careers, specifically, whether it increases interest in civil engineering. Louisiana Tech’s first-year engineering experience provides relevant, project-focused education for over 500 students each year and an opportunity to introduce transportation-related projects. The six semester-hour, three-course sequence, called “Living with the Lab,” boosts experiential learning through student ownership of inexpensive laboratory equipment. In one section of the Living with the Lab course, a transportation engineer visited the class and the students were led through a technology-rich transportation engineering activity. They used …

Evaluation Of The Safety Effectiveness Of Clearview Font And Fluorescent Yellow Sheeting On Michigan Freeways And Non-Freeways, Lusanni Mercedes Acosta Rodrieuez

Masters Theses

Halation or irradiation makes guide sign fonts difficult to read. Missing the necessary guide sign information causes anxiety and confusion to drivers, and hence may lead to crashes. In order to avoid or mitigate the situation a newer font, Clearview, is used to provide better readability at long distances. In a similar context the lack of brightness in sheeting material for warning signs reduces conspicuity of sings. Installation of fluorescent yellow sheeting has been done to provide signs with more noticeable and brighter materials. This observational before and after study is an evaluation of the safety and economic benefits of …

An Exploratory Scenario For San Francisco To Become A Walking, Bicycling And Transit City, Chaowen Huang

Master's Projects and Capstones

The effects of greenhouse gases (GHGs) on global warming and climate change have become increasingly evident, and the transportation sector is a dominant contributor to GHG emissions which responsible for 13% of the world’s total GHG emissions and more than 21% of overall energy-related CO₂ emissions. Cities need sustainable transportation system that integrate new technologies and strategies to provide efficient and effective transit service while reducing its GHG emission and improving its livability. This paper explores a suitable and sustainable transportation scenario for San Francisco to achieve its 2035 goal which is to reduce 1,767,500 metric tons GHG emissions …

Comparing Layer Types For The Use Of Mepdg For Fdr Design, Sadie Smith

Graduate Theses and Dissertations

While Full Depth Reclamation (FDR) has many potential cost and environmental benefits, especially over the lifetime of the pavement, it is necessary to be able to ensure that the recycled pavement will perform adequately. One way in which this can be accomplished is understanding how to best complete the structural design of FDR pavements. Because FDR is a combination of several different layers of material pulverized, mixed, stabilized and re-compacted, it does not fit neatly into any of these predetermined types of materials considered by the Mechanistic Empirical Design Guide (MEPDG). Current practice is to treat FDR as an unbound …