Civil and Environmental Engineering Commons^™

Climate Resilience: Examination Of Revised Heat Transfer Models In The Enhanced Integrated Climatic Model For Pavement Temperature Prediction, Austin Michael Jarrell

Theses, Dissertations and Capstones

The Mechanistic Empirical Pavement Design Guide (MEPDG) is commonly referenced as the state-of-the-practice for the analysis and design of new and rehabilitated pavement assets. The Enhanced Integrated Climatic Model (EICM) incorporated within the MEPDG is a well-recognized and standardized method for estimating temperature profiles in pavements; temperature is a portion of the climate inputs in the MEPDG. Many have already begun to convert atmospheric temperature predictions from externally based climate models into the MEPDG to create robust designs for climate change. As pavement designers and researchers seek robust solutions while formulating resilient pavement designs, it is likely that the EICM …

Experimental And Numerical Studies Of Novel Thermal Energy Storage Materials For Applications In Concrete And Energy Storage Systems, Wenyu Liao

Doctoral Dissertations

In this work, several types of novel thermal energy storage (TES) materials and composites are explored, and a series of numerical simulation models and experimental protocols are developed to evaluate the potentials of these materials to be applied in concrete, pavement, and thermal energy storage systems.

The first two types of novel TES materials/composites are at the micro-scale, which use micro diatomite (DE) and cenosphere (Ceno) as carriers of phase change material (PCM), respectively. The third type of novel TES material is at the macro-scale, utilizing lightweight sand (LWS) and lightweight coarse aggregate as carriers to load PCM. The last …

Colloidal Silica: Cement Enhancing Admixture Product Evaluation, Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

As Class F- fly ash (F-ash) becomes scarce, PCC engineers will look to other supplemental cementitious materials (SCM) to replace F-ash and its ASR mitigating properties. Colloidal silica (CS), or nano-silica, has been shown to mitigate ASR at certain replacement levels; however, CS cannot be a full replacement of F-ash. Engineers at the Nebraska Department of Transportation (NDOT) learned of CS from a presentation given by Intelligent Concrete, Inc. at the 2019 Nebraska Concrete Professionals Association Conference and decided to investigate the potential use of CS in NDOT concrete mix designs.

A Comparison Of Zinc Levels In Runoff From Rubberized Hot Mix Asphalt And Conventional Pavement, Peter A. Duin

Cal Poly Humboldt theses and projects

High levels of dissolved zinc in water bodies can be toxic to aquatic organisms. There are currently over 40 waterways in California that have on occasion been in exceedance of Clean Water Act minimum toxicity threshold standards for zinc. Recycled tires that contain 1-2% zinc by mass are commonly used in California paving formulations known as Rubberized Hot Mix Asphalt (RHMA). The addition of tires to RHMA increases the zinc content of the pavement in comparison to conventional HMA. This research assesses the zinc content and leaching rate of RHMA in field and laboratory settings to estimate its contribution of …

Evaluation Of Tie-Bar Anchoring Methods: Non-Shrink Grout Vs. Epoxy, Wally Heyen, Lieska Halsey, Tim Krason, Brandon Varilek, David Hansen

Nebraska Department of Transportation: Research Reports

Tie bars are epoxy coated steel bars that connect the longitudinal joints in concrete pavement. Tie bars prevent faulting and joint separation between lanes Tie bars can be placed into the plastic concrete or inserted after curing by drilling and anchoring with epoxy or non-shrink grout. The specification for the tie bars requires the use of a No. 5 bar, 18 inches long and shall meet ASTM A775 / A775M [1], Section 1020.The Nebraska Department of Transportation “Standard Specifications for Highway Construction,” (Section 603.03) requires contractors to mechanically insert tie bars into the face of pavements during construction. Tie bars …

Development Of A Framework For The Calibration Of Rpas, A 3d Finite Element Analysis Tool For Rigid Pavements, Abbasali Taghavighalesari

Open Access Theses & Dissertations

The accurate analysis of rigid pavements requires a reliable modeling procedure based on integrating mechanistic analysis methods (i.e. closed-form solutions or numerical methods) and empirical observations (i.e. field measurements and laboratory test results). The use of the finite element method to model the response of rigid pavements has increased in recent decades due to its capability to incorporate the complexity of material behavior, traffic information, and environmental condition. Researchers from the University of Texas at El Paso developed the software Rigid Pavement Analysis System (RPAS) to comprehensively analyze the response of concrete pavements under different geometric configurations, foundation models, temperature …

A Performance-Based Analysis Of Balanced Mix Designs, Elias Aaron Castillo

Open Access Theses & Dissertations

The Superpave design procedure was established to provide a more representative design methodology and to minimize typical pavement distresses such as fatigue cracking and permanent deformation. This Superpave design methodology was developed on the premise that the voids in mineral aggregate can evaluate the quality and constructability of asphalt mixture during the design and production phases. With the increased use of recycled materials, recycling agents, modified binders and warm mix asphalt additives, several highway agencies including the Texas Department of Transportation (TxDOT), have investigated whether the Superpave volumetric-based design method is enough to ensure appropriate performance of the final product. …

Development Of High-Performance Rapid Patching Materials For Pavement Repair, Gholami Shayan, Jiong Hu, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

Concrete pavements exhibiting severe distresses which require patching are commonly observed in the concrete pavement in Nebraska. Due to the requirements of opening pavement to traffic after placing the rapid patching materials, it is essential for that concrete to achieve high early strength. To ensure this, a high cement content and chloride-based accelerators are currently used in the Nebraska Department of Transportation (NDOT) Portland cement-based rapid-patching materials. Besides its associated high cost, high cement content tends to result in a less stable mix with high shrinkage, high heat of hydration, and high cracking potential. In addition, using chloride-based accelerators has …

Effect Of Light Activated Self-Healing Polymers On The Performance Of Asphalt Pavement Containing Recycled Asphalt Materials (Rap/Ras), Sharareh Shirzad

LSU Doctoral Dissertations

A new generation of Ultraviolet (UV) light-induced self-healing polymers was introduced for the asphalt pavement application with the aim to enhance pavements durability while increasing its service life. The developed self-healing polymer was mixed with asphalt binder using two different methods, passive and reactive. For the passive method, the cured self-healing polymer was ground to smaller particle size and then it was mixed with asphalt binder using a high shear stirrer and at a high temperature. For the reactive method, self-healing polyurethane pre-polymer was added to the asphalt binder at a lower temperature and lower shear rate compare to the …

Mitigating Reflective Cracking Through The Use Of A Ductile Concrete Interlayer, Qian Zhang, Mohammad Khattak, Adway Das

Data

Corresponding data set for Tran-SET Project No. 18PLSU13. Abstract of the final report is stated below for reference:

"Reflective cracking is considered one of the most important issues that causes premature deterioration of composite pavements. Many types of mitigation methods have been studied in the past. However, they are either not effective in delaying the reflective cracking, or they only extend the service life by a few years. To address this critical issue and significantly extend the service life of the composite pavement, in this research, a ductile interlayer made of engineered cementitious composites (ECC) was proposed. It was hypothesized …

Mitigating Reflective Cracking Through The Use Of A Ductile Concrete Interlayer, Qian Zhang, Mohammad Khattak, Adway Das

Publications

Reflective cracking is considered one of the most important issues that causes premature deterioration of composite pavements. Many types of mitigation methods have been studied in the past. However, they are either not effective in delaying the reflective cracking, or they only extend the service life by a few years. To address this critical issue and significantly extend the service life of the composite pavement, in this research, a ductile interlayer made of engineered cementitious composites (ECC) was proposed. It was hypothesized that by adding a thin layer of highly ductile ECC material between the existing pavement and overlay, reflective …

The Development Of Initial Asphalt Mixture Acceptance Criteria Using The Scb Test And The I-Fit Test, Nathan Delman Parnell

Graduate Theses and Dissertations

Cracking has become the primary asphalt pavement distress in Arkansas. Arkansas along with other states have implemented a test to measure rutting resistance. This paper presents research to implement a cracking resistance test to further modify the Superpave volumetric asphalt mixture design method in Arkansas. The Illinois Flexibility Index Test (I-FIT) was the test chosen to analyze for this research. Two aging methods were tested, a short term oven aging (AASHTO R30 ST) and a long term oven aging (NCAT) method. Six asphalt mixtures were selected to be tested. The mixtures testes were recreated from Arkansas Department of Transportation (ARDOT) …

Use Of Bagasse Ash As A Concrete Additive For Road Pavement Application, Gabriel Arce, Marwa Hassan, Maria Gutierrez-Wing, Michele Barbato

Data

Corresponding data set for Tran-SET Project No. 18CLSU03. Abstract of the final report is stated below for reference:

"The objective of this study was to evaluate the use of sugarcane bagasse ash (SCBA) as a partial replacement of cement in concrete for road pavement application. The study explored the pozzolanic activity of SCBA produced from three different processing methodologies (i.e., raw SCBA, controlled SCBA and post-processed SCBA). The experimental results revealed that SCBA produced by the controlled burning of sugarcane bagasse fiber (SBF) at 650°C and grinding (C-650), presented the maximum pozzolanic activity. However, this SCBA production process was deemed …

Investigation Of Dsr Test Methods To Determine Binder Low Temperature Properties, Kommidi Santosh, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

The low temperature rheology of bituminous binders is of great interest because low temperature cracking is one of the primary asphalt pavement failure modes observed in cold-climate places such as Nebraska. Low temperature binder characterization/grading has been primarily conducted using the bending beam rheometer (BBR), while the dynamic shear rheometer (DSR) can alternatively be used to characterize the low temperature properties of binders with the recent advancement of DSR equipment that can cover a wide range of testing temperatures. This study investigates alternative testing-analysis methods using the DSR to determine low temperature asphalt binder properties that have been measured by …

Use Of Bagasse Ash As A Concrete Additive For Road Pavement Application, Gabriel Arce, Marwa Hassan, Maria Gutierrez, Michele Barbato

Publications

The objective of this study was to evaluate the use of sugarcane bagasse ash (SCBA) as a partial replacement of cement in concrete for road pavement application. The study explored the pozzolanic activity of SCBA produced from three different processing methodologies (i.e., raw SCBA, controlled SCBA and post-processed SCBA). The experimental results revealed that SCBA produced by the controlled burning of sugarcane bagasse fiber (SBF) at 650°C and grinding (C-650), presented the maximum pozzolanic activity. However, this SCBA production process was deemed challenging for large-scale industrial application due to low SCBA yield (i.e., 3 to 6%). On the other hand, …

Investigating The Interaction Of Ndot Hot-Pour Pcc Joint Sealant And Penetrating Concrete Sealers, Bruce Barrett, Dale Byre, Wally Heyen, Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

Based on the field observations on NE-83, PCS potentially impacts the bond between the concrete and hot-pour sealant after application. If penetrating sealers break the interfacial bond after application, concrete pavements could become compromised and subject to freeze-thaw damage, chloride attack, and other deleterious effects.

The results show that discoloration occurred when applying the five PCS products to the NE-3405 hot-pour sealed testing blocks. All three test methods of application; spraying, 1-min, and 5-min soaks, caused discoloration. The level of discoloration increased with the duration of contact with the PCS. Despite discoloration, none of the five PCS products caused de-bonding …

Research On High-Rap Asphalt Mixtures With Rejuvenators - Phase Ii, Hamzeh Haghshenas, Gabriel Nsengiyumva, Yong-Rak Kim, Kommidi Santosh, Soroosh Amelian

Nebraska Department of Transportation: Research Reports

A previous study by the authors have demonstrated effectiveness of three rejuvenators: R1 (triglyceride/fatty acid: agriculture-tech based), R2 (aromatic extract: petroleum-tech based), and R3 (tall oil: green-tech based) on rejuvenating properties of the aged binder. In that study, it was observed that the rejuvenators made high-RAP mixtures softer and more compliant, which may increase the rutting potential, while they simultaneously improve cracking resistance of the high-RAP materials. Research outcomes and findings from the previous study resulted in consequential research needs for more specific investigation of high-RAP mixtures with rejuvenators in order to achieve realistic implementation into future high-RAP paving projects …

A Threshold To Utilize Guayule Resin As A New Binder In Flexible Pavement Industry, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study denotes a threshold to utilize Guayule Resin as a new bio-based binder or asphalt cement (AC) proportion, both with/out crumb rubber modifier (CRM), regarding solutions for environment, cost, and sustainability aspects. Via this research, 15 designated binders will be presented, all of them were tested as unaged and RTFO, whereas eight binders proceeded with PAV. Superpave was utilized to study their physical properties. Viscosity was examined upon some guayule-based binders with/out CRM, getting 114cP (at 135℃) for BGR, increased to about 3 times with 10%CRM (by weight of liquid binder) and about 7-8 times with 20%CRM. Comparisons among …

Use Of Ultra‐High‐Performance Fiber‐Reinforced Concrete (Uhp‐Frc) For Fast And Sustainable Repair Of Pavements, Shih-Ho Chao

Data

Corresponding data set for Tran-SET Project No.17STUTA03. Abstract of the final report is stated below for reference:

"This research presents a new methodology, which enables streets, roads, highways, bridges, and airfields to use an advanced fiber-reinforced concrete material, which can delay or prevent the deterioration of these transportation infrastructure when subjected to traffic and environmental loadings. The major problem of concrete is its considerable deterioration and limited service life due to its brittleness and limited durability. As a result, it requires frequent repair and eventual replacement, which consumes more natural resources. Ultra-high-performance fiber-reinforced concrete (UHP-FRC) introduces significant enhancement in the …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Data

Corresponding data set for Tran-SET Project No. 17CLSU05. Abstract of the final report is stated below for reference:

"The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated …

Use Of Ultra-High-Performance Fiber-Reinforced Concrete (Uhp-Frc) For Fast And Sustainable Repair Of Pavements, Shih-Ho Chao

Publications

This research presents a new methodology, which enables streets, roads, highways, bridges, and airfields to use an advanced fiber-reinforced concrete material, which can delay or prevent the deterioration of these transportation infrastructure when subjected to traffic and environmental loadings. The major problem of concrete is its considerable deterioration and limited service life due to its brittleness and limited durability. As a result, it requires frequent repair and eventual replacement, which consumes more natural resources. Ultra-high-performance fiber-reinforced concrete (UHP-FRC) introduces significant enhancement in the sustainability of concrete structures due to its dense microstructure and damage-tolerance characteristics. These characteristics can significantly reduce …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Publications

The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated in compression, tension, and bending to assess its mechanical properties. Furthermore, the cracking characteristics of the materials produced …

Understanding Asphalt Concrete Aging Using Nanoindentation, Hasan M. Faisal

Civil Engineering ETDs

Asphalt concrete (AC) is created by mixing liquid asphalt binder with solid aggregates. When asphalt binder is mixed with aggregates, it creates a thin film (about 7-16 microns thick) around the aggregate surface. Fine aggregate (smaller than 0.075 mm size) get entrapped within the binder film or mixed with the binder, and create a phase called mastic. Both asphalt film and mastic play significant roles in aging of asphalt pavement. To this day, tests were performed mainly on the bulk liquid asphalt, but not on the film or mastic. In this study, for the first time, nanoindentation tests were done …

Assessment Of Sustainability And Resilience In Transportation Infrastructure Geotechnics, Jasaswee T. Das

Civil Engineering Dissertations - Archive

Transportation infrastructure, such as roads, embankments, bridges, railroads, airports, docks, and canals, serve as pathways for the mobility of people, goods, and services, and form the backbone of cities and communities. The construction, operation, and rehabilitation of these facilities put significant strain on the local, state, and federal agencies, including depletion of natural resources, and contributing to the global carbon footprint and greenhouse gas emissions. Further, these features stimulate anthropocentric development in a region which affects the land-use patterns and influences the demography of communities. In recent years, most transportation infrastructure are typically designed to withstand external and internal disturbances …

New Mixture Additives For Sustainable Bituminous Pavements, Gabriel Mukristu Nsengiyumva, Kommidi Santosh, Yong-Rak Kim, Helan Xu, Yiqi Yang

Nebraska Department of Transportation: Research Reports

In an effort to improve mechanical properties of asphalt concrete, an exploratory research using mixture additives was attempted. Two different types of additives on two material scales were used: asphalt concrete (AC) level and binder level. At the start of this study, the effect of natural cornhusk fibers on the resistance of two types of AC mixtures on cracking were tested for hot-mix asphalt (HMA) and cold-mix asphalt (CMA). The results showed slight improvements in cracking resistance in cornhusk reinforced HMA, and in the case of the CMA, marshal flow. Overall, based on the test results, cornhusk-reinforced HMA and CMA …

Hot Applied Sealant Bond Test For Joints With Penetrating Sealers, Lieska Halsey

Nebraska Department of Transportation: Research Reports

Recently a concern has been raised for hot applied sealant bond for joints with penetrating sealers. The objective of this study will be to determine if the bond between the sealant and the concrete is compromised by the sealer currently approved to be used in Nebraska. The expected results will be that the bond is not compromised and is serving for the expected joint service life.

Compressive Strength Of Concrete Cylinders By Different Preparation Methods: Sulphur, Neoprene Pads And Grinding, Wally Heyen, Lieska Halsey

Nebraska Department of Transportation: Research Reports

The purpose of this evaluation is to compare the effects of four types of cylinder preparation methods prior to compressive strength testing in accordance to ASTM C 39.

Effect Of Polypropylene Fiber Reinforcement On The Consolidation, Swell And Shrinkage Behavior Of Lime Blended Expansive Soil, Arif Ali Baig Moghal, Bhaskar C.S. Chittoori, B. Munwar Basha

Civil Engineering Faculty Publications and Presentations

In this article, synthetic fibers in the presence of lime stabilization are proposed as an alternative to overcome the issues related to shrink-swell distress in expansive soils. Two types of synthetic fibers, Fiber Cast® (FC) and Fiber Mesh® (FM), were studied by conducting one dimensional fixed ring Oedometer swell-consolidation and bar linear shrinkage tests. Three dosages (0.2, 0.4 and 0.6% percent by weight of soil) and two lengths of the fibers (6 and 12 mm) were evaluated with and without lime treatments. The results indicated that FC fibers had better swell restricting performance in the absence of lime treatment, while …

Optimization For The Allocation Of Funds For Pavement Maintenance In Pavement Management Systems, Armando Ramirez

Open Access Theses & Dissertations

Pavement maintenance and rehabilitation are critical and costly elements for highway agencies. A challenge for transportation agencies is to preserve roadways in an appropriate condition and extend the pavement service life while maintaining the safety and satisfaction of its users, and maximize the benefits obtained by the repair investments. Pavement maintenance programming is increasing in complexity due to limited resources and increments in traffic and population. Management decisions are usually based on personal judgment by pavement managers and sometimes those decisions are not even supported by previous experience. Research shows that optimization methods can produce significant benefits when transportation agencies …

Guayule Plant Extracts As Binder Modifiers In Flexible (Asphalt) Pavement Mixtures, Steven Michael Lusher

Doctoral Dissertations

"The guayule (pronounced, 'why-YOO-lee') plant is a woody perennial shrub that is native to areas of the southwestern United States and northern Mexico, and is a well-documented source of high-quality natural rubber. The U.S. needs a domestic source of natural rubber to allay concerns about its future availability. Cultivation of guayule in North America has been attempted many times since the late 19th century, and companies, including major tire manufacturers, are again investing in guayule research. However, full-scale commercialization of guayule rubber needs established markets for the two basic by-products of guayule rubber extraction: the plant resins (primarily non-rubber compounds) …