Civil and Environmental Engineering Commons^™

Ce 432-102: Structural Steel Design, Raj Navalurkar

Civil and Environmental Engineering Syllabi

No abstract provided.

Mech 236-004: Engineering Mechanics: Dynamics, Rajib Moral

Civil and Environmental Engineering Syllabi

No abstract provided.

Mech 236-002: Engineering Mechanics: Dynamics, Rajib Moral

Civil and Environmental Engineering Syllabi

No abstract provided.

3d Printing Reinforced Concrete Structures, Bryce Tyler Tafolla

Masters Theses

"This study aims to investigate a 3D printing method to directly incorporate continuous reinforcement into concrete structures. The ability to design and produce complex structures with optimized topographical configuration can be used to reduce potential material waste while maintaining the required structural strength. Furthermore, the ability to actively incorporate reinforcement into printed members substantially reduces potential labor requirements and eliminates the need to set up formwork.

The study began its initial approach with a manual extrusion process containing reinforcement to observe the necessary constraints required to achieve a printing system with this functionality. The second stage of development was designing …

Removel Of Polluntants From Aqueous Solution Via Graphene Oxide/Magnesium Oxide Nanocomposites, Mahdi Heidarizad

Civil and Environmental Engineering Theses and Dissertations

In this study, a series of graphene oxide/magnesium oxide nanocomposites (GO/MgO NCs) were synthesized and applied for the removal of Methylene Blue (MB) from aqueous solutions. The prepared NCs were characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The results showed that MgO particles were successfully layered on GO. The impacts of different experimental variables on the removal of MB including GO/MgO NCs dosage, pH, contact time, and initial MB concentration were investigated.

Thereafter, we investigate the mechanism and kinetics of ozonation processes in the presence of GO/MgO NCs as a catalyst …

Evaluation Of The Mechanisms And Effectiveness Of Nano-Hydroxides, Wood And Dairy Manure-Derived Biochars To Remove Fluoride And Heavy Metals From Water, Anna Rose Wallace, Wenjie Sun Dr, Chunming Su Dr

Civil and Environmental Engineering Theses and Dissertations

The development of effective treatment processes for the removal contaminants, such as fluoride and heavy metals, from polluted water have been urgently needed due to serious environmental health and safety concerns. In this dissertation, a variety of materials including various (hydro)oxide nanomaterials, biochars and surface modified biochar were studied to evaluate their effectiveness and mechanism on removing fluoride or mixed heavy metals from water.

In the Chapter 2, this study investigated the adsorptive removal of fluoride from water using various (hydro)oxide nanomaterials, focusing on ferrihydrite, hydroxyapatite (HAP) and brucite, which have the potential to be used as sorbents for surface …

Generalized Relay Network Design And Collaborative Dispatching In Truckload Transportation, Amin Ziaeifar

Operations Research and Engineering Management Theses and Dissertations

The truckload industry faces a serious problem of high driver shortage and turnover rate which is typically around 100\%. Among the major causes of this problem are extended on-the-road times where drivers handle several truckload pickup and deliveries successively; non-regular schedules and get-home rates; and low utilization of drivers dedicated time. These are by-and-large consequences of the driver-to-load dispatching method, which is based on point-to-point dispatching or direct shipment from origin-to-destination, commonly employed in the industry. In this dissertation, we consider an alternative dispatching method that necessitates careful design of an underlying network. In this scheme, a truckload on its …

Mech 234-003: Engineering Mechanics - Statics, G. Milano

Civil and Environmental Engineering Syllabi

No abstract provided.

Field Monitoring Of A Tieback Wall And Comparison To Common Design Methods, Matheus Barbosa Santos De Miranda

Graduate Theses - Civil Engineering

This thesis presents the monitoring of a 28-foot high retaining wall located on the Rose- Hulman Institute of Technology (RHIT) campus and compares inclinometer and load cell data with common design methods. In addition, it briefly provides discussion regarding how the retaining structure is used to enhance student learning. The wall consists of soldier piles and wood lagging with tiebacks that vary from 22.5 to 40 feet. Construction was completed in 2017. Instrumentation, including load cell and inclinometers were installed to measure deflection, tieback load, and water level. This thesis describes the construction activities and the data gathered to date. …

Ce 200a-041: Surveying Lab, Allison Lapatka

Civil and Environmental Engineering Syllabi

No abstract provided.

Outdoor Education Center Concept Site Master Plan And Improvements As Designed By Wingineers, Christina Thibodeau

Honors Program: Senior Projects (Public)

This thesis builds on a basis of four years of engineering education to produce a final project for the capstone course. The idea behind this project was to provide a workable master plan and conceptual site improvements for a real application, the Outdoor Education Center in east Lincoln, Nebraska. The Boy Scouts of America Cornhusker Council and the University of Nebraska – Lincoln Department of Civil Engineering have cooperated throughout the Senior Design capstone course to make this possible for the students involved.

Boy Scouts Of America Concept Site Master Plan And Improvements, Anna Cole, Jacob Chekal, William Seeger, Shanon Al-Brady, Nicholas Cowles

Honors Program: Senior Projects (Public)

Our team, G1 Engineering, has partnered with the Boy Scouts of America to provide an update to their master plan for the Outdoor Education Center site located at 600 S. 120^th Street, Lincoln, NE. Our work included providing transportation solutions; drainage evaluations; investigation of geotechnical conditions; environmental evaluation and determination of permitting requirements; preparation of concept design plans for bridges, drainage, utilities, and overall site plan; and evaluation of structural elements included in the project.

Two streams cross the property presenting site access issues. Our team provided pedestrian, UTV, and emergency vehicle access bridges to address these issues. With …

Equilibrium-Based Workload Balancing For Robust Emergency Response Operations In Metropolitan Areas, Parya Roustaee

Civil and Environmental Engineering Theses and Dissertations

This thesis presents an equilibrium-based modeling framework for emergency response (ER) workload balancing to achieve robust operation in large-scale metropolitan areas. The problem is formulated as a non-linear mathematical program (NLP), which determines the optimal workload cutoff for each ER station such that the weighted sum of the area-wide expected response time and its variation are minimized. The concept of Marginal Cost of Uncertainty (MCU) is introduced to measure the impact of a station’s workload increase on the area-wide service performance. The solution of the NLP is proved to be equivalent to a state of equilibrium in which all stations …

Behavior Of Geothermal Energy Piles Embedded In Rock, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Geothermal energy piles are categorized as closed systems. Energy piles are a relatively new technology which couples the structural role of traditional pile foundations to that of heat exchangers to fulfill the required energy demand of buildings and infrastructures. These foundations are equipped with pipes embedded in the concrete forming the pile. While connected to a heat pump, the fluid circulating inside these pipes provides the exchange of heat with the ground for heating and cooling purposes. As the undisturbed temperature at the shallower depths of the ground stays comparatively constant the whole year, being warmer than the surrounding temperature …

Geo-Spatial Mapping As A Catalyst For Creative And Engaged Design In Engineering Education, Jessie Zarazaga

Multidisciplinary Studies Theses and Dissertations

Exploiting the technology of geo-spatial mapping student designers can develop deep understandings of the rich and layered data of a spatial context, a situational understanding essential to responsible civic design. However the actions inherent in the construction of spatial data armatures can simultaneously be harnessed as creative strategies, in which mapping processes become the context for generative spatial play. The ambition of this study is to propose efficient pedagogic structures to help prepare civil and environmental student engineers to be not only strong participants, but leaders, in the design of the built environment. The interpretation of site data, mapped as …

Congestion Mitigation Strategy: Modeling The Effect Of Different Geometric Configurations Of A Two-Lane On-Ramp On Capacity Using Vissim, Rhizlane Brachmi

ETD Archive

Freeway on-ramps are critical components of freeway systems since they control the entry of traffic to the mainline. According to the Highway Capacity Manual (HCM), a two-lane on-ramp configuration will achieve less turbulence than a similar one-lane on-ramp but little guidance on the desired lengths of the acceleration lanes or their effect on the operation of the influence area is provided. An experiment was designed to investigate the effect of the lengths of the acceleration lanes of isolated, two-lane on-ramps on the operation of the ramp influence area. The Highway Capacity Software (HCS) was used to calculate the density of …

Ce 431-106: Construction Materials Laboratory, Steve George

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 443-141: Foundation Design, Ivan Guzman

Civil and Environmental Engineering Syllabi

No abstract provided.

Investigation Of Dredge Material Dewatering Through Hydraulic And Ground Improvement Methods, Monica Moody

Williams Honors College, Honors Research Projects

Every year almost 1.5 million tons of material is dredged from Lake Erie to allow passage for boat traffic. In the past, this material has been placed back into the open waters of the lake. However, starting July 2020 this will no long be permitted due to the passing of Senate Bill 1. Therefore, secondary uses of this dredging material are being investigated. To be used, the material needs to be quickly dewatered and stabilized. This project consists of literary reviews of two methods of rapid dewatering, hydraulic placement and ground improvement methods. Hydraulic placement dewatering requires the use of …

Spatial Exploration Of Trace Metals In Near-Surface Water And Soil In The Bolivian Altiplano, Lizzie Wilson

Civil and Environmental Engineering Theses and Dissertations

We analyzed soil and groundwater samples from the Bolivian Altiplano for trace metal concentrations, correlations and partitioning trends. Total digestion, sequential extraction and loss on ignition experiments were performed on soil samples. We ran aqueous samples on an ICP-MS. Results were analyzed to identify trace metal concentrations and find any significant correlations. We generated interpolated maps in ArcGIS to spatially analyze results. Results for elevated concentrations of interest were divided into sub-groups of organophilic metals, oxoanions and divalent metals and include vanadium, arsenic, selenium, zinc, nickel, lead, cobalt, uranium, copper and manganese. These elements are likely naturally sourced. We found …

Developing Computer Codes For Analyzing Bridge Response Due To Wim Data Truck Loading, Kenneth Patrick Pasley

Graduate Theses and Dissertations

Despite actual truck demographics evolving over the past 30 years, the Arkansas legal loads for bridge posting have not been updated. Custom computer codes were developed.to facilitate comparison between the current Arkansas legal loads for bridge posting and the actual Arkansas truck traffic to ensure that actual reactions are enveloped by the state'. The program, WIMFluence, calculates shear and moment influence lines for a bridge and the resulting shear and moment reactions based on weigh-in-motion data. With supporting scripts, the reactions due to actual Arkansas truck traffic were compared to those due to the current Arkansas legal loads for bridge …

Effect Of Continuity Plate Eccentricity On The Performance Of Welded Beam-To-Column Connections, Jason Thomas Norwood

Graduate Theses and Dissertations

Beam-to-column connections in structural steel buildings may have varying degrees of rotational restraint and varying degrees of moment transfer. In fully restrained moment connections, shear is typically transferred through the beam web, while the moment is mostly transferred through the beam flanges which create tension/compression force couples. Column sections that are incapable of resisting these flange forces are often retrofitted with continuity plates within the connection region to improve capacity. In cases of unequal beam depths on either side of the column, an eccentricity between the framed-in beam flange and continuity plate may be required; however, limited research exists to …

Flexural Rigidity Estimation Using Noisy Static Influence Lines, Yasha Hajizeinalibiouki

Civil and Environmental Engineering Theses and Dissertations

Society depends on critical infrastructure to support everyday activities. Even as critical components of civil infrastructure approach and exceed their design lives, demand on these structures continues to increase. In light of the need for managing aging infrastructure, several opportunities exist for research that can aid infrastructure managers in significant the challenge of detecting, classifying, and mitigating structural impairments. This dissertation presents a novel framework for impairment detection through the capture and utilization of deformation influence lines for flexural rigidity estimation on Euler-Bernoulli beams. In this research study, mechanical theory, a computer-vision algorithm, and multiple numerical methods are integrated to …

Ce 350-101: Transportation Engineering, Joyoung Lee

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 333-001-003: Reinforced Concrete Design, M Ala Saadeghvaziri

Civil and Environmental Engineering Syllabi

No abstract provided.

Mech 234-001-003: Engineering Mechanics: Statics, G Milano

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 332-001: Structural Analysis, Eduardo Castro

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 200a - Surveying Lab, Allison Lapatka

Civil and Environmental Engineering Syllabi

No abstract provided.

Ce 360-001: Sustainable Civil Engineering Materials, Matthew Adams

Civil and Environmental Engineering Syllabi

No abstract provided.

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …