Civil and Environmental Engineering Commons^™

Toward Automated Irrigation Management With Integrated Crop Water Stress Index And Spatial Soil Water Balance, Sandeep Bhatti, Derek M. Heeren, Susan A. O’Shaughnessy, Christopher M. U. Neale, Jacob Larue, Steve Melvin, Eric Wilkening, Geng Bai

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Decision support systems intended for precision irrigation aim at reducing irrigation applications while optimizing crop yield to achieve maximum crop water productivity (CWP). These systems incorporate on-site sensor data, remote sensing inputs, and advanced algorithms with spatial and temporal characteristics to compute precise crop water needs. The availability of variable rate irrigation (VRI) systems enables irrigation applications at a sub-field scale. The combination of an appropriate VRI system along with a precise decision support system would be ideal for improved CWP. The objective of this study was to compare and evaluate two decision support systems in terms of seasonal applied …

Remote Sensing And Artificial Intelligence-Based Modeling And Prediction Of Harmful Algal Blooms In Lake Pontchartrain, Ian Smith

LSU Master's Theses

Harmful Algal Blooms (HABs) and particularly toxic cyanobacterial harmful algal blooms (CyanoHABs) have become a growing threat to the environment, economy, communities, and human and animal health. This is particularly true for Lake Pontchartrain. Forecasting the occurrence of cyanobacterial HABs in Lake Pontchartrain is a process that currently does not exist, as nowcasting by the NCCOS Algal Bloom Monitoring System or the similar system implemented by the U.S. EPA is currently the only method to monitor HAB production in the Lake. This thesis made this process possible by identifying antecedent environmental conditions controlling CyanoHABs, describing the conditions using NASA satellite …

Assessing The Release Of Microplastics And Nanoplastics From Plastic Containers And Reusable Food Pouches: Implications For Human Health, Kazi Albab Hussain, Svetlana Romanova, Ilhami Okur, Dong Zhang, Jesse Kuebler, Xi Huang, Bing Wang, Lucia Fernandez-Ballester, Yongfeng Lu, Mathias Schubert, Yusong Li

Department of Civil and Environmental Engineering: Faculty Publications

This study investigated the release of microplastics and nanoplastics from plastic containers and reusable food pouches under different usage scenarios, using DI water and 3% acetic acid as food simulants for aqueous foods and acidic foods. The results indicated that microwave heating caused the highest release of microplastics and nanoplastics into food compared to other usage scenarios, such as refrigeration or room-temperature storage. It was found that some containers could release as many as 4.22 million microplastic and 2.11 billion nanoplastic particles from only one square centimeter of plastic area within 3 min of microwave heating. Refrigeration and room-temperature storage …

Ecological Validity Of Immersive Virtual Environment Experiments On Human Thermal State And Behavioral Intentions: Experimental Protocol Factors, Girish Rentala

LSU Doctoral Dissertations

Using immersive virtual environment (IVE) based experiments to investigate human thermal states and thermal adaptive behaviors during the building design phase could help identify potential comfort issues and enable designers to optimize building performance cost-effectively before the actual building construction. However, to effectively utilize IVEs to study thermal states/adaptive behaviors, it is crucial to ensure the ecological validity of IVE experiment protocols. This entails accurately representing in-situ (real) environments within IVEs and establishing comparability and generalizability of data collected under different thermal stimuli between IVE and in-situ environments. Existing thermal stimuli based IVE studies have not effectively evaluated the ecological …

Behavioral Comparison Of Fluorescent Tracer Sediment To Lightweight Polystyrene Sediment Of The Lower Mississippi River Physical Model (Lmrpm), Julia C. Mudd

LSU Master's Theses

A lightweight, unexpanded polystyrene sediment with a specific gravity of 1.05 and a D10, D50 and D90 of 0.250 mm, 0.425mm, and 0.800 mm, respectively, is utilized in the Lower Mississippi River Physical Model (LMRPM) at Louisiana State University to mimic the sand transport of the Lower Mississippi River. While the black model sediment is easily visible against the stark white of the LMRPM, the relative homogeneity of the sediment particles and the opaqueness of the model channel make it difficult to closely study sediment dynamics during an experiment. For this reason, a tracer sediment that is marked with fluorescence …

Exploring Machine Learning In Deep Foundation And Soil Classification Application, Mohammad Moontakim Shoaib

LSU Master's Theses

The applicability of several Machine Learning (ML) models was explored in this research to predict the ultimate capacity and load-settlement behavior of axially loaded single-driven piles from Cone Penetration Test (CPT) data. Additionally, a common CPT-based soil behavior type (SBT) classification system was reproduced using those ML models. Eighty static pile load tests and corresponding CPT data close to those pile locations were collected from 34 sites in Louisiana for the deep foundation application. On the other hand, 70 CPT soundings were taken in 14 different parishes across Louisiana for the soil classification application. Specifically, tree-based ML models such as …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

High-Throughput Phenotyping Of Plant Leaf Morphological, Physiological, And Biochemical Traits On Multiple Scales Using Optical Sensing, Huichun Zhang, Lu Wang, Xiuliang Jin, Liming Bian, Yufeng Ge

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Acquisition of plant phenotypic information facilitates plant breeding, sheds light on gene action, and can be applied to optimize the quality of agricultural and forestry products. Because leaves often show the fastest responses to external environmental stimuli, leaf phenotypic traits are indicators of plant growth, health, and stress levels. Combination of new imaging sensors, image processing, and data analytics permits measurement over the full life span of plants at high temporal resolution and at several organizational levels from organs to individual plants to field populations of plants. We review the optical sensors and associated data analytics used for measuring morphological, …

Evaluation Of Temperature-Index And Energy-Balance Snow Models For Hydrological Applications In Operational Water Supply Forecasts, Tian Gan, David G. Tarboton, Tseganeh Z. Gichamo

Civil and Environmental Engineering Faculty Publications

In the western United States, snow accumulation, storage, and ablation affect seasonal runoff. Thus, the prediction of snowmelt is essential to improve the reliability of water supply forecasts to guide water allocation and operational decisions. The current method used at the Colorado Basin River Forecast Center (CBRFC) couples the SNOW-17 temperature index snow model and the Sacramento Soil Moisture Accounting (SAC-SMA) runoff model in a lumped approach. Limitations in parameter transferability and calibration requirements for changing conditions with the temperature-index model motivated this research, in which new avenues were investigated to assess and prototype the application of an energy-balance snow …

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Program: Senior Projects (Public)

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

The Efficacy Of Conservation Practices In Reducing Floods And Improving Water Quality, Shivendra Srivastava, Andrea D. Basche, Elbert Traylor, Tirthankar Roy

Department of Civil and Environmental Engineering: Faculty Publications

Conservation practices such as crop rotation, filter strips, and constructed wetlands are nature-based approaches intended to safeguard natural resources in agricultural landscapes. In this study, we reviewed the literature on how conservation practices, both at watershed and field scales, have been proven to subdue flood peaks, surface runoff, soil erosion, sediment transport, and nutrient loss. We classified different conservation practices based on the mode of their application (i.e., in-field, edge-of-field, and structural practices) and described what prior research efforts have concluded about the efficacy of different practices. At the field scale, practices such as reduced or no-till farming, grassed waterways, …

Evaluating The Potential Of Geopolymer Concrete As A Sustainable Alternative For Thin White-Topping Pavement, Sathvik S. Chandra, Pshtiwan Shakor, Sarwar Mohmmad, Bankole O. Awuzie, Atul K. Singh, Abishek Rauniyar, M Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Introduction:

The construction industry uses a large quantity of natural materials in the production of concrete. Although attempts to incorporate green materials in concrete began years ago, not every building uses such materials today, and roadways, particularly, still rely on unsustainable materials.

Methods:

Therefore, this study used alternative materials, including fly ash, manufactured sand aggregates, and different molarities of alkaline activators, to incorporate waste byproducts in a geopolymer concrete white-topping pavement layer. Recent developments have led to the emergence of geopolymers as distinct classes of materials. In the 1990s, fly ash-based geopolymers became more popular than other kinds, as they …

Meta-Analysis Of Driving Behavior Studies And Assessment Of Factors Using Structural Equation Modeling, Duong Ngoc Hai, Chu Cong Minh, Nathan Huynh

Department of Civil and Environmental Engineering: Faculty Publications

The aim of this paper is to understand the factors that influence unsafe driving practices by examining published studies that utilized the Theory of Planned Behavior (TPB) to predict driving behavior. To this end, it reviews 42 studies published up to the end of 2021 to evaluate the predictive utility of TPB by employing a meta-analysis and structural equation model. The results indicate that these studies sought to predict 20 distinct driving behaviors (e.g., drink-driving, use of cellphone while driving, aggressive driving) using the original TPB constructs and 43 additional variables. The TPB model with the three original constructs is …

Strength As A Function Of Liquid Water Content In Different Snow Types - Results From Field Experiments Using A Blade Hardness Gauge, Mikael Schlumpf

Civil Engineering ETDs

The rapid weakening of snow layers that locally accumulate infiltrating liquid water is a well-known mechanism for wet slab avalanche formation. To quantify this process and improve the prediction of these destructive avalanches, a blade hardness gauge (BHG, a.k.a thin blade penetrometer) and SLF snow sensor were used to take 349 targeted paired measurements of strength and LWC, respectively, in the snow above 19 artificially wetted capillary barriers. Using a multiple regression analysis, we develop an expression for the blade hardness of manually wetted snow as a function of LWC, crystal form, and blade hardness prior to wetting. To understand …

Equity In Transportation: Data Driven Analysis Of Transportation Services And Infrastructures, Javad Jomehpour Chahar Aman

Civil and Environmental Engineering Theses and Dissertations

Achieving equity in transportation is an ongoing challenge, as transportation options still vary tremendously when it comes to marginalized populations. This dissertation addresses this challenge by conducting a comprehensive review of existing transportation equity literature and identifying two critical gaps: the lack of data-driven approaches to studying spatial mismatch between transportation supply and demand, and limited information on women's perceptions and expectations towards emerging transportation services.

Chapter two introduces the concept of transportation "deserts," specifically transit deserts and walking deserts, and develops data-driven frameworks to identify and investigate neighborhoods with limited transportation service supply but high demand. The frameworks compare …

A Mechanics-Based Analytical Solution For Restrained Beams With Application To Progressive Collapse Behavior, Leven Deputy

Civil and Environmental Engineering Theses and Dissertations

This dissertation presents an axially restrained beam (ARB) model that incorporates axial-flexural interaction throughout the entire static load-deflection curve: the elastic material range, the plastic, flexural dominant range, the range beyond plastic flexure with increasing catenary effect, and the full catenary range. Energy methods are applied to static load-deflection curves to determine dynamic load-deflection relationships. Specifically, this dissertation considers the two conditions; Pinned-Pinned-Pinned (PPP) which has no flexural resistance at the boundaries, and Fixed-Fixed-Fixed FFF (also Pinned-Fixed-Pinned, PFP) condition which provides the beam with flexural resistance at the boundaries equal to flexural capacity of the beam. Behavior is explained analytically …

3d Printing Of Earthen Materials: Toward The Carbon-Zero Construction, Shiva Bhusal

Civil Engineering ETDs

In recent years, digital manufacturing techniques in the architecture and construction industry have rapidly gained attention, especially with 3D printing, also called additive manufacturing. The use of cement has been common in modern construction and is now being explored for 3D printing. However, due to cement's contribution to approximately 7 percent of global carbon emissions and its high cost, research on sustainable and greener materials has gained attention. Previous studies on alternative construction have examined the mechanical and rheological properties of soil mixes, but not much attention has been given to printability evaluation, shrinkage, and cracking, which can affect the …

Additive Manufacturing Of Lightweight Concrete Mixtures, Kourosh Rashidi

Civil Engineering ETDs

Additive manufacturing, also known as 3D printing, is an innovative technique that is increasing its popularity in many industries including construction. 3D printing is related to the layer wised manufacturing or additive construction of any simple to intricate geometry from a digital file. The construction industry has a high potential for using 3D printing technology. However, one of the critical factors in the adaption of additive manufacturing in the construction industry is achieving a printable concrete mix design. This research aims to design printable mixes of lightweight concrete that could be effectively used in the 3D printing of walls or …

Evaluation Of The Geotechnical And Foundation Components On Jud Site, Mirabel W. Nkanor

Honors Theses

This thesis is part of the senior design final project of the Civil Engineering Department at the University of Mississippi. Geotechnical and foundation analyses were done on a proposed construction project for a multi-family home in Orlando, Florida. This evaluation done in this thesis follows the pre-existing geotechnical report on the side, USDA soil reports, ASCE Code 32-01 (Design of Foundations), and ASCE-7 Section 12.31.1 (Foundations and Superstructure-to-Foundation Connections).

A structural system was selected from the proposed location, on the corner of South Conway and Judge Road, and an evaluation of the Bearing Load capacity was completed to determine the …

An Investigation Into The Common Problems Of Lagoon Wastewater Treatment In Kentucky, Kaylee A. Jones

Honors Theses

Lagoon wastewater treatment systems are commonly used in areas that do not have the available resources for typical mechanical wastewater treatment. Lagoon systems consist of multiple preliminary lagoons, but mainly rely on long-term facultative lagoons for most analyte removal. In this study, one particular lagoon wastewater treatment system (named Municipality A Wastewater Treatment Plant) is investigated due to noncompliance with governmental standards provided by the National Pollutant Discharge Elimination System (NPDES). Samples were collected by researchers at 4 different instances inside of the treatment systems. These samples were sent to an analytical laboratory for testing. The readings from these samples …

The Use Of Lidar To Measure Water Surface Elevations In Froude-Scaled Physical Hydraulic Models, Gary L. Bell

Theses and Dissertations

Light detection and ranging (LiDAR) instrumentation is becoming more diverse in our world of today. One challenge in scaled physical hydrodynamic models in a laboratory setting is obtaining high resolution water surface elevation data while maintaining accuracy requirements. Accurate water surface elevations are a primary parameter in hydraulic models as they are a means of controlling/monitoring the physical model’s boundary conditions, analyzing model experiment results, and informing model conclusions. This study focuses on laser scanners that have ranging accuracies of at least +/-10 millimeters (mm) or better for the purpose of attaining LiDAR water surface elevation measurements in scaled physical …

Aggregate Characteristics For Unpaved Highway Shoulders, Jessica V. Lewis

Theses and Dissertations

This thesis studied unpaved highway shoulders, and in particular shoulders of lower volume asphalt pavements being overlaid. The primary objective was to better understand how different shoulder aggregates perform on lower volume routes with asphalt surfaces and relatively narrow shoulders. A literature review and an evaluation of a full-scale test section containing five aggregate categories in nine test sections over a thirty-four-month period were the primary efforts performed to evaluate unpaved highway shoulders. The study concluded shoulder width measurements were not especially informative, and that California Bearing Ratio measurements were only modestly informative. Crushed concrete outperformed all other aggregates, though …

Lateral Swelling Pressure In Variably Saturated Expansive Clay, Steven Ray Garrett

Theses and Dissertations

Lateral swelling pressure induced in expansive soils upon wetting can adversely impact the performance and integrity of earthen structures and foundations. The yearly cost associated with damage to structures from expansive clays in the United States is estimated to exceed the loss associated with natural disasters such as earthquakes, floods, and hurricanes. The main objective of this dissertation is to provide new insight into the evolution of lateral swelling pressure in variably saturated expensive soils under infiltration via physical testing. In the first part of this study, a new laboratory-scale testing apparatus was built to measure lateral and vertical swelling …

Integrating Steel Slag Aggregates Into Asphalt Paving By Harmonizing Availability, Quality, Economics, And The Environment, Timothy R. Murphy

Theses and Dissertations

This thesis provides guidance on how to balance matters related to the environmental stewardship, market sources, origin and uses, material properties, performance, and economic impact of using slag materials in pavements. The literature on this topic provides numerous references on the use of slag materials for specific applications, and this thesis aims to make use of those references along with other data from the author to describe slag materials from a holistic perspective and provide some suggestions for balancing several factors that impact optimal use of this resource within pavement structures. Discussion is given to the increased importance of recycling …

Wildfire-Altered Geotechnical Soil Properties And Their Impact On Subsequent Landslides, James M. Kellogg

Theses and Dissertations

Wildfires result in altered landscape as well as altered soil properties. Wildfires result in conditions that are more susceptible to geotechnical hazards introducing a potential for cascading events in the surrounding area. Shallow landslides are common geohazards that result in a post-wildfire landscape. With an ever-increasing trend in wildfires, the need to better understand the impact wildfire-altered soil properties play on shallow slope instability is critical to evaluating risks to existing or planned development, mitigation of potentially hazardous conditions, prioritization of post-wildfire planning, and post-wildfire response preparation. The primary objective of this study is to provide a comprehensive overview of …

Synthesis Of Biomass-Based Graphene Nanomaterials For Aqueous Heavy Metal Removal And Cement-Based Composite Property Enhancement, Tharindu N. Karunaratne

Theses and Dissertations

Utilizing biomass such as lignin, bamboo, soybean, corn stalk, rice husk, etc., as a carbon source to produce graphene-based nanomaterials has been reported recently. However, the potential of using such nanomaterials for engineering and environmental applications has not been realized. This dissertation investigates the use of graphene-based nanomaterials synthesized from using biomass as a carbon source for water remediation and cement-based composites’ (CBCs) property enhancement.

The first chapter introduces graphene and graphene-based nanomaterials, as well as the synthesis and application of graphene-based nanomaterials for removing heavy metals in an aqueous solution and for property enhancement in CBCs. The experimental investigation …

The Effect Of Four Decades Of Deregulation On Competition And Productivity Of The U.S. Freight Transportation Industry, Seungjae Shin

Theses and Dissertations

This study reviews the competition and productivity of the U.S. freight transportation industry for the past 41 years. This study investigated the trends of HHI market concentration index values and labor productivity values of rail and truck sectors and tried to find any relationships between the two values in the separate periods before and after the abolishment of the ICC. This study also investigated how the existence of a regulatory body impacted productivity of the freight transportation industry by using a Cobb Douglas production function on annual financial statement data in the U.S. stock exchange market. This study found that: …

Advancements In Geospatial Monitoring Of Structures, Jordan Keith Baldwin

Theses and Dissertations

The need for advancements in geospatial monitoring of structures has evolved naturally as structures have become larger, more complex, and technology has continued to rapidly develop. Greater building heights generally lead to greater challenges for surveyors, limiting the practical use of traditional measurement methods. For this reason, a new complimentary method was developed and implemented to support elevation monitoring activities during construction of the Salesforce Tower in San Francisco, California. While some studies have explored the use of strain gauges to monitor strain development within individual members, the primary contribution of this work is that it presents a practical and …

Physics-Based Modeling Of Post-Wildfire Landslides In Unsaturated Hillslopes, Masood Abdollahi

Theses and Dissertations

Changes in climatic regimes and land use have led to increases in wildfire activities around the world. Wildfires are now happening more frequently, at higher altitudes, and higher severities. Adverse impacts of wildfires can last years after the fire has been contained through post-fire geohazards, such as shallow landslides. Post-wildfire shallow landslides are often mobilized by rainfall and due to fire-induced changes in soil and land cover properties and near-surface processes. This study aims to develop a physics-based framework to evaluate the stability of burned hillslopes against rainfall-triggered shallow landslides. A coupled hydromechanical infiltration model is developed by employing a …

Research And Application Of Dynamic Compaction Treatment Method For Highway Subgrade In Karst Development Area, Liu Xiaoming, Wang Yigang, Zhao Minghua

Journal of China & Foreign Highway

This paper utilizes discrete-continuum coupled numerical simulation to investigate the failure modes of karst cave roofs with varying spans under specific compaction energy levels. The relationship between the span of the cave roof and the compaction energy required to cause roof collapse is established, providing an estimation method for the maximum unsupported span of cave roofs within the subgrade area. Based on this, the stability of karst cave foundations under the influence of subgrade loads can be evaluated. Depending on the results, a double-layer reinforced continuous concrete slab can be installed in the pavement base to enhance stability and mitigate …