Civil and Environmental Engineering Commons^™

Exploring The Effect Of In-Plane Tensile Forces On The Two-Way Shear Strength: Review, Comparative Study And Future Works, Ahmed F. Deifalla, Eslam Mousa, Dina Yehia, Amr Abdelrahman

Future Engineering Journal

Two-way shear failure of slabs is a sudden one, which has catastrophic outcomes. Slabs with large spans may be subjected to in-plane tensile forces due to thermal or earthquake loading. There is a lack of agreement between various design codes regarding the significance of in-plane tensile forces on the two-way shear strength.

Two-way shear failure of slabs is a sudden one, which has catastrophic outcomes. Slabs with large dimensions may be subjected to in-plane tensile forces due to restraint or earthquake loading. There is a lack of agreement between various design codes regarding the significance of in-plane tensile forces on …

Effect Of Reinforcement Around Web Opening On The Cyclic Behavior Of Exterior Rc Beam-Column Joints, Ahmed F. Deifalla, Amin Saleh, Sherif Elwan, Mostafa Hamad, Sherif Elzeiny

Future Engineering Journal

In many situations, it is necessary to have a beam web opening in the plastic hinge location. However, very limited studies investigated the behavior of reinforced concrete (RC) beam-column joints with nearby beam web openings. A previous study was conducted for investigating the behavior of beam-column joints with unreinforced nearby web opening. In this study, the effect of adding additional reinforcing around a nearby web opening on the seismic behavior of RC exterior Beam-Column joints is being investigated. Nine full-scale beam-column joints were tested, four joints had an unreinforced opening, while five joints had reinforced opening. The behavior of the …

Optimum Cross Section And Longitudinal Profile For Unstiffened Fully Composite Steel Beams, Ahmed M. Ebid Dr.

Future Engineering Journal

Composite steel beam is commonly used element in multistory steel buildings today. The composite action between the concrete deck and the steel beam reduces both steel weight and deflection, accordingly, enhance floor economy and serviceability. Many earlier researches were carried out to optimize the design of the composite steel beams under both static loading and dynamic behavior. None of these researches was concerned in optimizing the cross section or the longitudinal profile of built-up composite steel beams. The aim of this research is to develop simple and practical equations to determine the optimum cross section dimensions and optimum longitudinal profile …

Mit-S1 Constitutive Model Calibration For A Portland-Area Soil, Steven Ryan Young

Dissertations and Theses

Soils that are intermediate to sands and clays are a challenge for geotechnical engineers since most methods for interpreting soil properties or soil behaviors are based on sands or clays and do not address behaviors of intermediate soils. This is a particular challenge for engineers in the Portland-area where many of the major soil units are composed of intermediate soils. Analysis of intermediate soils is further challenged since many standard constitutive models are based on sandy or clay-like soils. However, the MIT-S1 constitutive model is capable of capturing intermediate soil behavior. A calibration of the MIT-S1 constitutive model for Portland-area …

Management Of The Phosphorus-Cladophora Dynamic At A Site On Lake Ontario Using A Multi-Module Bioavailable P Model, Martin Auer, Cory P. Mcdonald, Anika Kuczynski, Chenfu Huang

Michigan Tech Publications, Part 1

The filamentous green alga Cladophora grows to nuisance proportions in Lake Ontario. Stimulated by high phosphorus concentrations, nuisance growth results in the degradation of beaches and clogging of industrial water intakes with attendant loss of beneficial uses. We develop a multi-module bioavailable phosphorus model to examine the efficacy of phosphorus management strategies in mitigating nuisance algal growth. The model platform includes modules simulating hydrodynamics (FVCOM), phosphorus-phytoplankton dynamics (GEM) and Cladophora growth (GLCMv3). The model is applied along a 25 km stretch of the Lake Ontario nearshore, extending east from Toronto, ON and receiving effluent from three wastewater treatment plants. Simulation …

Festigkeitsbeschreibung Des Schwerbetons Auf Alkalischlacken – Bindemittel, A Tulaganov, S Hodjaev, A Sultanov, B Tulaganov, B Otakulov, N Hodjaev, D Abdasov

The Scientific-Practice Journal of Architecture, Construction and Design

The article describes the laws of describing the strength of heavy concrete based on non-calcined alkaline binders. It is shown that strength is written as a function of the generalized argument.

Why Unsafety Has A Negative Relationship With Economic Effectiveness In The World?, Aziz Zikriyoev

The Scientific-Practice Journal of Architecture, Construction and Design

Due to regularly registered diseases and major accidents of workers in the construction industry can be explained expandable building projects and state programs for supporting population. The main purpose of the current paperwork is to explain wining unsafety at workplaces both theoretical and practical points of view generated with economic and social levels.

Implementation Of A Novel Inertial Mass System And Comparison To Existing Mass-Rig Systems For Shake Table Experiments, Alvaro Lopez, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

Shake table testing is one of the more effective experimental approaches used to study and evaluate seismic performance of structures. Reduced-scale models can still result in large-scale specimens where incorporating the required inertial mass effectively and safely can be challenging. This study proposes a new system of arranging the mass in the experiments that combines the realism of mass participation during earthquake excitation when supported by the shake table with laboratory practicality considerations of the mass positioned off the specimen. The characteristics and dynamic motion equations for the proposed system are described and applied to shake table experiments involving large-scale …

Computational Analysis Of High Carbon Steel For Optimal Design, Muhammad Zubair, Aneela Wakeel, M. Mustafa Azeem, Aneeqa Tabbassum

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To increase the reliability of materials the computational analysis has been considered a vital tool for designing the components in the mechanical and nuclear engineering. By increasing a high percentage of carbon in liquid steel subsequently enhance the hardness, elasticity and toughness of the materials. In this research high carbon steel has been used due to its wear resistance properties in order to increasing hardness and strength. The findings of this research reveal the high carbon steel a good replacement material for conventional iron due to its low weight. Modeling and analysis of the steel, metallic glass and high carbon …

Numerical Simulation Of Continuous Cone Penetration And Interpretation Of Cptu Dissipation Tests, Andrew Phillip Eugene Huffman

Dissertations and Theses

The piezocone penetration test (CPTu) is a commonly used method of geotechnical site investigation. The CPTu is especially useful because it provides a nearly continuous data profile of in-situ soil behavior, which can be correlated to useful engineering parameters. However, limitations exist for interpretation of geotechnical properties from CPTu data and for numerical analysis of cone penetration problems. The research presented in this thesis examines interpretation of coefficient of consolidation from CPTu dissipation test data and implementation of an algorithm to advance numerical simulation of cone penetration problems. This thesis presents analysis of CPTu dissipation responses from field-measured and numerically …

Exposing Nuclear Power Plants, Sophia Austin

Copley Library Undergraduate Research Awards

This paper will begin by outlining the eco-justice topic of nuclear power and its resulting nuclear waste, and then move on to examining and making claims about the justice (distributive, procedural, and recognition-based), evidence, and process behind the development and decommissioning of these plants. Through this, we will discover historical and present ties to racism - especially as we explore the relationship between nuclear power and the white racial frame, resulting in the objectification, oppression, and suppression of the voices of Indigenous communities and people of color throughout history and into the present moment. After addressing and reflecting on many …

2021 Civil And Environmental Engineering Department News, Department Of Civil And Environmental Engineering, Michigan Technological University

Department of Civil, Environmental, and Geospatial Engineering Newsletters

Table of Contents

• CEEPAC
• Great Lakes Models
• Wastewater Treatment
• Enterprise
• Outreach
• Rail Program
• Alumni Feature
• Lifetime Giving

Moving Beyond ‘More Crop Per Drop’: Insights From Two Decades Of Research On Agricultural Water Productivity, Meredith Giordano, Susanne M. Scheierling, David O. Tréguer, Hugh Turral, Peter G. Mccornick

Daugherty Water for Food Global Institute: Faculty Publications

Concern over increasing water scarcity has led to the introduction of the concept of agricultural water productivity and an emphasis on interventions to achieve ‘more crop per drop’. Yet, a strong debate continues on how the concept is to be defined and used. Drawing largely from the irrigation literature, the origins of the concept and its methodological developments are reviewed, and its use in applied work over two decades is discussed. Based on this analysis of conceptual and applied research, key insights into the concept’s contributions and limitations are presented, as well as opportunities for further refinements.

A Critical Analysis Of The Application Of Augmented Reality (Ar) For Monitoring And Documentation Of Construction Site Progress In The Irish Aec Industry., Bim Tudublin, Lukasz Sarnot

Capstone Reports

Sarnot, L. (2021) A critical analysis of the application of augmented reality (AR) for monitoring and documentation of construction site progress in the Irish AEC industry, Capstone Project from the MSc in aBIMM

An Examination Of The Use Of Geotechnical Bim To Provide Value Engineering Solutions For Coastal Infrastructure., Bim Tudublin, Eric Brennan

Capstone Reports

The digitisation of construction is taking root as Building Information Modelling is becoming more prevalent across the industry. From an Irish context, the adoption rate of BIM has been slow; nationally its advantages and merits have been welcomed and the appropriate government support is either available, soon to be implemented or in the early conceptual stage. Within the Irish governments Project Ireland 2040 framework there are significant infrastructure developments looming ahead, in particular regarding ports and harbours. The importance of this type of infrastructure is only further compounded due to the UK’s departure from the EU and the need for …

An Analysis Of Estimated Costs Versus Actual Costs In Usace Section 14 Emergency Streambank Protection Projects, Hunter Waugaman

Theses, Dissertations and Capstones

The U.S. Army Corps of Engineers (USACE) Civil Works projects are designed to provide national management of water resources. These works use emergency streambank protection to protect public facilities, like bridges and highways. The projects under this authority have limited funding, therefore, many design and field studies are omitted, which increases project uncertainties resulting in cost overruns and contract modifications. This study analyzes previously constructed projects by comparing the independent government estimate with the contractor’s actual costs and identifying the variables causing these differences via statistical analysis. The variables identified are categorized into those elements that affect the accuracy of …

Asset Management Framework For The United States Army Corps Of Engineers Lock And Dam Electrical Equipment, Megan Elizabeth Bates

Theses, Dissertations and Capstones

The focus of this thesis is to design an efficient and effective preventative maintenance program for the electrical equipment that the United States Army Corps of Engineers (USACE) operates at the locks and dams. This thesis presents the concept of asset management and designs a framework to manage the electrical assets at USACE. The methodology was tested, and the results validated the framework proposed in this thesis. The framework was tested on two separate projects and the results were the same optimized strategies, which shows that the framework is robust and can be implemented into each project and can give …

Climate Resilience: Examination Of Revised Heat Transfer Models In The Enhanced Integrated Climatic Model For Pavement Temperature Prediction, Austin Michael Jarrell

Theses, Dissertations and Capstones

The Mechanistic Empirical Pavement Design Guide (MEPDG) is commonly referenced as the state-of-the-practice for the analysis and design of new and rehabilitated pavement assets. The Enhanced Integrated Climatic Model (EICM) incorporated within the MEPDG is a well-recognized and standardized method for estimating temperature profiles in pavements; temperature is a portion of the climate inputs in the MEPDG. Many have already begun to convert atmospheric temperature predictions from externally based climate models into the MEPDG to create robust designs for climate change. As pavement designers and researchers seek robust solutions while formulating resilient pavement designs, it is likely that the EICM …

Unsteady-State Contact Angle Hysteresis During Droplet Oscillation In Capillary Pores: Theoretical Model And Vof Simulation -- Data, Chao Zeng, Wen Deng, Lichun Wang

Unsteady-State Contact Angle Hysteresis during Droplet Oscillation in Capillary Pores: Theoretical Model and VOF Simulation -- Data

Spreadsheet - Data of Figures 2 through 11.

Supporting information

Balsa Wood Bridge, Andrew Harris

All Undergraduate Projects

Faculty at Central Washington University proposed a challenge to mechanical engineering students that could be accomplished in an in-home setting. The goal was to create a balsa wood bridge, weighing no more than 85 grams, that can support a load over an open span and raise above its resting position by means of a mechanical system. To produce a successful solution to the problem, a vertical lift bridge was created consisting of two lifting towers and a load bearing bridge. Using equations of static equilibrium and strength of materials, the required width for each member was determined. Project requirements were …

Inspire Newsletter Spring 2021, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Inspire Newsletter Fall 2021, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Studying The Relationship Between Indigenous Microbial Communities, Urease Activity, And Calcite Precipitation In Artificial Mixes Of Clay And Sand, Somaye Asghari, Bhaskar C. S. Chittoori, Malcolm Burbank, Nick Hudyma

Civil Engineering Faculty Publications and Presentations

Microbial-induced calcium carbonate precipitation (MICP) is evolving as a new method of improving the mechanical properties of soil. This environmentally friendly technique is a bio-geo-chemical process where microbes play a key role in increasing soil strength through precipitating calcium carbonate. Past studies at Boise State University have indicated that MICP via bio-stimulation could be a viable alternative for expansive clayey soil treatments. However, these studies raised a new question about the relationship between soil composition, urease activity, and calcite precipitation. To answer this question, batch studies were conducted using autoclaved-sterilized sand mixed with different percentages of non-sterile natural clay and …

Moffatt Eddies In Subglacial Mountain Valleys, Emily Martinez

ENGS 88 Honors Thesis (AB Students)

Currently, there is a global emphasis in finding the oldest ice in Antarctica, which will give the longest climate record contained within the ice. This is fundamental in the field of climate science because it will give scientists a proper baseline to compare it to sediment cores amongst other proxy records and work to determine a more accurate account of climate change. The most promising place to find the oldest ice is within the thick, slow-moving East Antarctic Ice Sheet. Within this ice sheet, there is a thick region of ice that sits on a mountain range known as the …

Renewable Energy Production By Solar Chimney: The Influence Of Curved Guide Vanes On The Performance Of A Solar Chimney Using Cfd Simulation, Haokun Xue

Theses, Dissertations and Capstones

The aim of this study is to investigate the effect of the guide vanes on the efficiency of the turbine of solar chimney power plant using Computational Fluid Dynamics (CFD). In this study, a 3-Dimentional CFD simulation of solar chimney power plant based on the Manzanares prototype is performed. The CFD simulation is validated by comparing the experimental data from the Manzanares prototype and simulation data with both 2D and 3D cases. To capture turbulent flow inside the chimney, the SST 𝑘 − 𝜔 turbulence model is used. The first object is to investigate the flow performance under the influence …

An Analysis Of A Hybrid Steel Bridge, Andrew Iglehart

Mahurin Honors College Capstone Experience/Thesis Projects

The American Institute of Steel Construction hosts a competition for graduating college seniors each year. The competition is designing and fabricating a scaled steel bridge within certain parameters. Each year the parameters change to allow different seniors to face similar challenges without copying the previous year’s work. Before the outbreak of COVID-19, a bridge was fabricated as per the rules in the 2020, and the same bridge was used for the 2021 competition. With a bridge already fabricated and being used for the competition, a question arose about analyzing the bridge.

This thesis encompasses the entire analysis of the steel …

Northeast Florida: A New Hotspot For Hurricane Damage?, William R. Dally, Raphael Crowley, Nick Hudyma

Civil Engineering Faculty Publications and Presentations

Until recent Hurricanes Matthew and Irma struck northeast Florida, Hurricane Dora had been the first and only hurricane-strength storm in recorded history to strike the region. The area had gradually become regarded as a safe spot as storms at that latitude generally curved away from Jacksonville and northeast Florida, and turned north to make landfall in the Carolinas. Unknown to most, Vilano Beach had been experiencing steady yet chronic beach erosion and was already in a highly vulnerable state in many places when the recent storms struck. The cause of the ongoing background erosion continues to be a source of …

To What Extent Can Innovative International Project Delivery Strategies (Which Leverage Bim) Improve The Cost Certainty Of Large Complex Public Procurement Projects In The Context Of Irish Public Procurement?, Bim Tudublin, Roqaya Abouklaib

Capstone Reports

Cost overrun is one of the biggest issues in the construction sector, and cost certainty is one of the main aims of the public construction sector in Ireland. Studies have shown that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. BIM, Lean, and IPD are independent methodologies that encourage collaborative work, and there are existent effective synergies among these concepts. The synergetic innovative international strategies were utilised for delivering large complex projects successfully globally, and many authors have studied large complex public projects that have adopted innovative international project delivery strategies collaboratively and have shown that the cost …

Opportunities In The Irish Reinforced Concrete Industry For Lean And Bim Adoption, Bim Tudublin, Kieran Mcconnell

Capstone Reports

The Irish Reinforced Concrete (RC) sector has yet to realise the full potential of Building Information Modelling (BIM) and Lean construction. The positive impacts and benefits of both BIM and Lean in the wider Architecture, Engineering and Construction sector are widely recognised; many of these are transferable to the RC sector, but there is limited research and knowledge on practical transference, uses and advantages. This research aims to fill some of the existing knowledge gaps by examining BIM and Lean adoption and awareness in the Irish RC sector across sub-sectors, professions, and organisational levels, and by exploring opportunities for increasing …

A Critical Examination Of Visual Programming And Generative Design For The Compliance Checking Of Open Plan Office Layouts Against Hse Guidelines Post Covid-19., Bim Tudublin, Ronan Byrne

Capstone Reports

The purpose of this study is to explore the feasibility of Visual Programming (VP) and Generative Design (GD) in assisting employers review open plan office layouts against Ireland’s HSE guidelines implemented in May 2020 in response to Covid-19. The pandemic has affected all areas of life with workplace standards requiring a complete overhaul. This study will attempt to ascertain compliance with natural ventilation and social distancing requirements through the completion of an experimental research study, utilising Computational Design (CD) tools. A GD study will be undertaken to provide the designer with numerous office layout design solutions to evaluate and evolve. …