Civil and Environmental Engineering Commons^™

Kentucky Transportation Cabinet Right Of Way Process Review (Phase I), Christopher W. Van Dyke, Bryan Gibson, Robin Baskette, Jeff Jasper, Candice Y. Wallace, Steven Douglas Kreis

Kentucky Transportation Center Research Report

From the Executive Summary:

The Kentucky Transportation Cabinet (KYTC) is responsible for planning, developing, constructing, and maintaining a prodigious inventory of roadway and bridge assets throughout the state. Project development is a complex process involving the coordination of numerous divisions and preconstruction disciplines across the Cabinet. On many projects, right-of-way (ROW) acquisition presents many challenges. Frequently, the ROW process is found on the critical path, meaning that it effectively governs a project’s overall duration. In some cases — especially on more complex projects — acquiring the ROW may take several years. Recognizing the need to shorten the duration and improve …

Update To Methodology For Setting Speed Limits In Urban Areas: Spr 827, Miguel Figliozzi, Avinash Unnikrishnan, Jaclyn S. Schaefer

Civil and Environmental Engineering Faculty Publications and Presentations

Many cities in Oregon are requesting a comprehensive review of speed zoning guidelines and existing procedures for streets with high volumes of active travelers. The main goal of this research is to develop recommendations for alternate criteria for setting speed zones on roadways with a high percentage of active travelers. Literature pertaining to factors affecting operating speed, speed and safety, speed management, and current speed zone practices is reviewed. The selection of the site and performance criteria is discussed. Qualities and characteristics of the speed data utilized are given. Distinctions between neighborhood and non-neighborhood greenways are noted. A before and …

Advancing Water Resources Systems Modeling Cyberinfrastructure To Enable Systematic Data Analysis, Modeling, And Comparisons, Adel Mohammad Kheir Abdallah

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Water resources systems models aid in managing water resources holistically considering water, economic, energy, and environmental needs, among others. Developing such models require data that represent a water system’s physical and operational characteristics such as inflows, demands, reservoir storage, and release rules. However, such data is stored and described in different formats, metadata, and terminology. Therefore, Existing tools to store, query, and visualize modeling data are model, location, and dataset-specific, and developing such tools is time-consuming and requires programming experience. This dissertation presents an architecture and three software tools to enable researchers to more readily and consistently prepare and reuse …

Evaluating The Hydraulic Performance Of Digital Photogrammetry-Derived 3-Dimensional Models Of A Hydraulic Structure Using Computational Fluid Dynamics, Tyler J. Ashby

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research investigated the combination of aerial imagery, photogrammetry, and computational fluid dynamics (CFD). Two 3D models of an 8-ft ramp flume were developed from aerial imagery using a commercial photogrammetry software. The GCP model was developed using ground control points (GCP) to improve and measure the model's accuracy. The Non-GCP model used GCPs as check points, which only measure the model's accuracy. The horizontal and vertical errors were, respectively, 0.39 in. and 0.73 in. for the GCP model, and 5.37 in. and 2.80 in. for the Non-GCP model.

In addition to the GCP and Non-GCP models, two hybrid 3D …

The Role Of Carbonate Minerals In Arsenic Mobility In A Shallow Aquifer Influenced By A Seasonally Fluctuating Groundwater Table, Jeremy Jensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Arsenic (As) is a poison historically used to great effect before modern detection methods rendered it obsolete. However, the largest mass poisoning in human history occurred due to groundwater in the Bengal Basin contaminated by natural sources of As. Since that time, research has determined that As is found in groundwater worldwide. This includes aquifers located in basin-filled valleys of the western United States. One of these valleys is the Cache Valley Basin located in Northern Utah. This semi-arid region contains carbonate-rich soils and is heavily influenced by snowmelt and seasonal runoff. Previous studies have found that 15% of private …

Investigation Of Strength And Fatigue Life Of Rubber Asphalt Mixture, Jiang Yuan, Songtao Lv, Xinghai Peng, Lingyun You, Milkos Borges Cabrera

Michigan Tech Publications, Part 1

Strength and fatigue life are essential parameters of pavement structure design. To accurately determine the pavement structure resistance of rubber asphalt mixture, the strength tests at various temperatures, loading rate, and fatigue tests at different stress levels were conducted in this research. Based on the proposed experiments, the change law of rubber asphalt mixture strength with different temperatures and loading rates was revealed. The phenomenological fatigue equation of rubber asphalt mixture was established. The genetic algorithm optimized backpropagation neural network (GA-BPNN) is highly reliable for optimizing production processes in civil engineering, and it has a remarkable application effect. A GA-BPNN …

Improved Ballistic Limit Equations For High-Speed Non-Aluminum Projectiles Impacting Aluminum Dual-Wall Spacecraft Systems, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

One of the major design considerations of earth-orbiting spacecraft is the damage that might occur from an impact by a micrometeoroid or orbital debris particle. Ballistic limit equations (BLEs), which predict the response of spacecraft components under impact, are one of the key components of any micrometeoroid / orbital debris risk assessment calculation. However, given that a limited number of BLEs have been developed, analysts will sometimes use a BLE to assess the impact projectile made of a material that was not used in the development of that BLE. This paper presents the results of a two-part study that focused …

Quantitative Assessment Of Alkali-Silica Reaction In Small And Large-Scale Concrete Specimens Utilizing Nonlinear Acoustic Techniques, Clayton Malone

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Nonlinear resonance techniques have been shown to be sensitive to microcracking in materials, including alkali-silica reaction (ASR) damage in concrete. However, application of nonlinear resonance tests have been limited due to the difficulty of application to large-scale field structures and the inability to quantitatively relate material nonlinearity with damage development. In this study, the development of ASR in concrete prisms and large concrete beam specimens of varying aggregate types and specimen sizes was monitored using linear and nonlinear resonance techniques.

For the concrete prisms, although the linear resonance frequency test could detect initiation and development of ASR damage in specimens …

Estimation Of Construction Site Elevations Using Drone-Based Orthoimagery And Deep Learning, Yuhan Jiang, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

Using deep learning to recover depth information from a single image has been studied in many situations, but there are no published articles related to the determination of construction site elevations. This paper presents the research results of developing and testing a deep learning model for estimating construction site elevations using a drone-based orthoimage. The proposed method includes an orthoimage-based convolutional neural network (CNN) encoder, an elevation map CNN decoder, and an overlapping orthoimage disassembling and elevation map assembling algorithm. In the convolutional encoder-decoder network model, the max pooling and up-sampling layers link the orthoimage pixel and elevation map pixel …

Sharing Is Caring: Assessing Willingness To Share Autonomous Vehicles For Evacuation And Disaster Relief, Thomas Alan Shirley

All Theses

Coastal areas in the southeastern United States face the threat of hurricanes each year. Some of the greatest danger associated with these storms is experienced by citizens without personal means to evacuate. Along with storms comes the inevitable post-disaster relief process of evaluating losses and delivering supplies. With the rapid development of autonomous vehicle technology, this study examines the potential use of autonomous vehicles, publicly or privately owned, to assist in these evacuation and disaster relief efforts. Examining this new field of study, the researchers hosted three focus groups and received 1050 responses to an online survey. Based on the …

Three-Dimensional (3d) Characterization Of The Middle Ordoovician (Darriwilian) Strata In The Southern Great Basin, Western United States, Uday Mohamed Baheej Kara Ali

UNLV Theses, Dissertations, Professional Papers, and Capstones

Carbonates are mostly produced in shallow-marine environments and their deposition is sensitive to water depth changes on carbonate platforms. The water depth in depositional environments of a particular carbonate platform is controlled by the interplay of eustatic sea-level change, tectonic subsidence, platform morphology, and depositional rate. Due to the morphological variations of carbonate platforms in different tectonic settings, facies distribution across carbonate platforms varies significantly even during a single eustatic sea-level cycle. Carbonate platforms developed on passive continental margins are thought to be the most stable platforms and their facies distribution is commonly taken as examples in textbook depositional models. …

Performance Of Cracked Reinforced Concrete Pipes Subjected To Different Environmental Conditions, Bassam Hatem Karim Al-Lami

Civil Engineering Dissertations - Archive

Performance of reinforced concrete pipes, as a major part of the water and waste-water infrastructure, plays an important role in the resilience and sustainability of today’s modern cities. Cracks may appear in these pipes due to handling and placement and might affect their long-term performance due to corrosion concerns. Current practice for quality control after installation of these pipes is quite strict and any pipe with a crack width of more than 0.01" is not approved. The goal of this research project is to evaluate the performance of cracked reinforced concrete pipes subjected to saline environments with three different concentration …

Temporal And Spatial Analysis Of The Wage Gap For Women And Underrepresented Minorities In The Architecture, Engineering, And Construction (Aec) Workforce, Saba Nikkhah Manesh

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Architecture, Engineering, and Construction (AEC) industry has failed to solve persistent labor shortage problems or to fill the labor demand in the workforce by recruiting from untapped/underrepresented groups such as Women and Underrepresented Minorities (WUMs). There have been several studies on diversity and inclusion in the AEC industry, but the issue still persists, as the AEC industry has failed to solve these issues. If the industry better understands the status of wage gaps by gender and race, as well as how the industry has performed in terms of providing comparable wages for the workforce over time, along with the …

Active Transportation And Health: Understanding The Impact Of Transportation-Related Physical Activity On Health, Sina Famili

Civil Engineering Dissertations - Archive

Car-oriented infrastructure in the U.S. leads to physically inactive lifestyles and negative health outcomes. To promote physical activity, public health officials encourage active transportation, namely biking and walking on daily trips. Previous studies proved that both perceived or self-assessed and objective health measures should be used to understand individuals’ health status. Therefore, this study uses the National Household Travel Survey (NHTS) data to understand the associations between perceived health and modal trip features including the number of trips, trip distance, and duration for auto, public transit, walk, and bike trips. Regarding the objective health, this dissertation uses one-week walking activities …

Development Of A Structural Design Methodology For Cementitious Sprayed Applied Pipe Linings In Gravity Storm Water Conveyance Conduits, Amin Darabnoush Tehrani

Civil Engineering Dissertations - Archive

Culverts are important components of the highway infrastructure. They form passageways through the embankment to convey storm water. Culverts are structurally designed to support superimposed earth loads or other fill materials as well as live loads. Corrugated metal pipes (CMPs) and reinforced concrete pipes (RCPs) are commonly used as culverts in the United States. Most of these culverts were installed four to five decades ago and have reached their design life. Spray applied pipe linings (SAPLs) are trenchless technology solutions for culvert rehabilitation that prevent further deterioration, such as corrosion, abrasion, etc., and can provide structural support for severely damaged …

Advancing Hydrologic And Hydraulic Understanding And Application Through Inundation Mapping And Estimation Of Losses, Jiaqi Zhang

Civil Engineering Dissertations - Archive

Flooding is the most frequent weather hazard that can cause serious fatalities and property damages worldwide. Climate change with extreme weather has further increased the impact from flooding and brought unprecedented challenges to engineering infrastructure and design. Scientists and engineers have used models to investigate and forecast the hydrologic and hydraulic responses to environmental changes in meteorological forcing and land use. With recent advances in sensing and computing technologies, models have been reaching higher levels of spatiotemporal granularity and scale. However, gaps exist between the scientific exploration and engineering practices. This doctoral study has been conducted to bridge such gaps …

Life Cycle Assessment Of The Us Beef Processing Through Integrated Hybrid Approach, Shaobin Li, Yuwei Qin, Jeyamkondan Subbiah, Bruce Dvorak

Department of Civil and Environmental Engineering: Faculty Publications

Hybrid life cycle assessment (LCA) incorporating process-based and economic input-output (EIO)–based inventory data has been applied in various industries (e.g., wind energy, biofuel). Few hybrid LCA studies have been found in the food industry. This work analyzes the life cycle environmental impacts of the US beef processing industry using process-based and integrated hybrid LCA. The process-based inventory includes all resource inputs and waste outputs associated with a beef processing plant. The EIO-based inventory includes key activities missing in the process-based inventory, such as technical and management service, wood and paper, and industrial equipment. Ten environmental impact categories from TRACI v2.1 …

Weber Basin Water Conservancy District Bottom-Up Climate Vulnerability Study Using Riverware, Jacob Everitt

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

With so much uncertainty of what the future has in store for us, how can we prepare for what lies ahead? The Weber Basin Water Conservancy District (WBWCD) needs to know how they can best prepare for future climate changes and future growth, and where their water system is vulnerable. A bottom-up approach can be used to consider how factors and subfactors effect the vulnerability of their water system's storage and delivery. This approach is accomplished with the use of RiverWare, an advanced water system modeling program. Scenarios to represent the factors are as follows: range of future stream flows, …

Kinetics, Affinity, Thermodynamics, And Selectivity Of Phosphate Removal Using Immobilized Phosphate-Binding Proteins, Kaushik Venkiteshwaran, Erin Wells, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

A phosphate (P_i)-selective adsorption system featuring immobilized P_i-binding proteins (PBP) has recently attracted attention for ultralow P_i removal followed by recovery. This study investigated the adsorption kinetics, affinity, thermodynamics, and selectivity, as well as the effect of pH and temperature on P_i adsorption using immobilized PBP (PBP resin). Immobilizing PBP did not affect its P_i affinity. Kinetic studies at 22 °C and pH 7.1 showed that the PBP resin achieved 95% of its equilibrium capacity within 0.64 ± 0.2 min. The estimated Langmuir affinity constant (K_L) was 21 ± 5 …

Entrepreneurial Based Project: Minority Owned Guardrail Installation Company, Nicholas Rubio

Construction Management

This company will provide commercial and highway guardrail installation services to the Northern California Region. The organization will retain a Minority Owned Business Certification and will operate under a Class C-32 License for Parking and Highway Improvement. Due to the large backlog of guardrail projects and the lack of qualified contractors in Northern California, the company plans to partner with existing firms that are unable to take on work. After firmly establishing ourselves in the private commercial market, the organization plans to migrate to public road work where the Minority Owned title can provide more benefit. Through this process we …

Seismic Design Coefficients For Speedcore Or Composite Plate Shear Walls - Concrete Filled (C-Psw/Cf), Shubham Agrawal, Morgan Broberg, Amit H. Varma

Bowen Laboratory Research Reports

This report summarizes the results from FEMA P695 analytical studies conducted to verify the seismic design factors for composite plate shear walls – concrete filled (C-PSW/CF), also referred to as Speedcore. ASCE 7-16 provides the seismic design factors, which include the seismic response modification factor, R, deflection amplification factor, C_d, and overstrength factor, Ω_o, for various approved seismic systems. C-PSW/CFs are assigned a response modification factor of 6.5, a deflection amplification factor of 5.5, and an overstrength factor of 2.5 for C-PSW/CFs. These seismic design factors were selected based on the seismic performance of similar structural …

Climate Change And Market-Based Insurance Feedbacks, Eric R. Holley, Adam Liska, Cory Walters, Geoffrey C. Friesen, Michael Hayes, Max J. Rudolph, Donald A. Wilhite

Adam Liska Papers

Climatic events have accounted for 91% of $1.05 trillion in insured costs for global catastrophic events from 1980 to 2016. Costs are driven by socio-economic development and increased frequency and severity of climatic disasters driven by climate change. Government policies to reduce systemic risk (e.g., cap-and-trade, carbon tax) have been a predominant approach for mitigation and adaptation. Alternatively, market-based incentives for climate change adaptation and mitigation already operate via the insurance industry to lessen impacts on society. Insurance feedbacks include changes in 1) premiums and insurance policies, 2) non-coverage, and 3) policy making and litigation. Alongside government policies, insurance feedbacks …

Alternative Designs Of Molten Salt Storage Shells For Use In Solar Energy Storage, Samaan G. Ladkany, Nathan Loyd

Civil and Environmental Engineering and Construction Faculty Research

Molten salt (MS) storage systems in the 565°C range can store green solar energy from thermal solar power station, such as the Crescent Dunes solar plant in Nevada. Large containers can be used to store energy and generate electricity for eight hours or more to be used at night or during peak demand hours, depending on the container size. Energy storage can reduce the fluctuation due to weather conditions experienced at thermal solar power stations because stable diurnal energy supply is made available by MS energy storage. Supported by the Office of Naval Research (ONR), the research presented discusses the …

Machine Learning-Based Temporary Traffic Control Cost Analysis, Yuhan Jiang, Sisi Han, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

In a design-bid-build infrastructural project, the agency may use a lump-sum, or unit-price for temporary traffic control (TTC) items, while their cost is hard to estimate. This paper presents the research results of developing a machine learning model of the relationship between the TTC items’ cost with the project total cost and non-TTC items in infrastructural projects. In detail, 163 infrastructural projects’ data were collected for analyzing two research questions: first, the relationship between the TTC items with the project total cost and non-TTC items; second, the relationship between the TTC items’ payment option with the project total cost and …

Wind Uplifting Performance Of Roof-To-Wall Connections And Roof Structures With Elastomeric Adhesives In Light-Frame Wood Buildings, Bilal M. Alhawamdeh

Dissertations

Light-frame wood residential buildings are highly susceptible to damage caused by severe wind events such as hurricanes and tornados. Roof failures in residential buildings are commonly observed due to weaknesses of or missing connections. Roof-to-wall connections not only have significant influences on roof performance but also affect building resistance due to their critical role of transferring wind loads to the wall system and ultimately to the foundation. Roof fails when it has no sufficient wind uplift resistance due to improper selection or installation of construction materials (including fasteners) and strength degradation due to aging or long service. Toenailing is commonly …

Feasibility Study On Concentrated Solar Power Plants In Malaysia, De Jen Choy

Student Works (2020-2029)

The rapidly growing economy and population in Southeast Asia has elevated the need for affordable, secured, sustainable and environmentally friendly energy sources. One such energy source is solar energy which is a suitable energy source for most Southeast Asian countries which are within the Sun Belt region. This study performs a performance and financial analysis on concentrated solar power (CSP) technologies, specifically the solar power tower (SPT) in the Malaysian environment through the use of simulation software. The significance of the study lies in the fact that limited research has been done on CSP technologies in Malaysia and the study …

Development Of Bragg Fiber Sensor For Corrosion Detection, Cai Hui Tan

Student Works (2020-2029)

Steel corrosion has posed one of the major structural defects in the civil society today. Conventional methods for corrosion monitoring involve high maintenance cost and destructive methods with low accuracy. Recently, Fiber Bragg gratings (FBG) sensor with its high sensitivity in measuring strain and temperature have been widely studied and used in structural health monitoring (SHM). A non-destructive corrosion detection approach based on FBG sensors was developed and tested to monitor corrosion in this research work. The principle of FBG sensing is based on Bragg wavelength shifts that from the corrosion process that induced strain on the FBG due to …

Application Of Artificial Intelligence And Geographic Information System For Developing Automated Walkability Score, Md Mehedi Hasan

Dissertations

Walking is considered as one of the major modes of active transportation, which contributes to the livability of cities. It is highly important to ensure walk friendly sidewalks to promote human physical activities along roads. Over the last two decades, different walk scores were estimated in respect to walkability measures by applying different methods and approaches. However, in the era of big data and machine learning revolution, there is still a gap to measure the composite walkability score in an automated way by applying and quantifying the activityfriendliness of walkable streets. In this study, a street-level automated walkability score was …

Venturi Flowmeter Performance Installed Downstream Of The Branch Of A Tee Junction, Benjamin G. Sandberg

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research was to evaluate the influence of a tee junction on flow rate measurement of a Venturi flowmeter installed downstream of the branch of a tee. Accuracy in flow measurement is important to organizations where miscalculated flow rates can add up to be millions of dollars in either lost revenue, overcharges to the client, or improper system operation. This research used Computational Fluid Dynamics (CFD) to determine ratios by which the manufacturer’s straight-line calibrated C_d (discharge coefficient) can be adjusted to improve the accuracy of the flow measurement when the Venturi is installed on the …

Assessing The Prevalence Of Suspicious Activities In Asphalt Pavement Construction Using Algorithmic Logics And Machine Learning, Mostofa Najmus Sakib

Boise State University Theses and Dissertations

Quality Control (QC) and Quality Assurance (QA) is a planned systematic approach to secure the satisfactory performance of Hot mix asphalt (HMA) construction projects. Millions of dollars are invested by government and state highway agencies to construct large-scale HMA construction projects. QC/QA is statistical approach for checking the desired construction properties through independent testing. The practice of QC/QA has been encouraged by the Federal Highway Administration (FHWA) since the mid 60’s. However, the standard QC/QA practice is often criticized on how effective such statistical tests and how representative the reported material tests are. Material testing data alteration in the HMA …