Civil and Environmental Engineering Commons^™

Development And Performance Assessment Of An Integrated Vermifiltration Based Treatment System For The Treatment Of Feedlot Runoff, Rajneesh Singh, Matteo D'Alessio, Yulie Meneses, Shannon L. Bartelt-Hunt, Brian Woodbury, Chittaranjan Ray

Nebraska Water Center: Faculty Publications

The objective of this study was to treat feedlot runoff by developing an ecologically sustainable, affordable, and resilient treatment system having a relatively long life span. Three horizontal flow soil biofilters were utilized in this study: 1) without earthworms and plants (Biofilter (BF)), 2) with earthworms only (Vermifilter (VF)), and 3) with earthworms and plants (Macrophyte Assisted Vermifilter (MAVF)). The experiments were conducted with a hydraulic retention time of four days using Lumbricus terestrris earthworms and Carex frankii wetland plants. The average COD removal from the BF, VF, and MAVF were 23.2–30.4%, 61.4–69.1%, and 68.3–78.1%, respectively. Average TN removal efficiencies …

Future Trends In Construction Waste Management, Zaur Zeynalov

International Programs

The problem of construction waste has been with us since the beginning of construction history. As the world's population continues to grow, construction waste grows with it and there is a pressing need to address how we deal with the construction waste problem As a result, the whole world is facing the problem of "construction waste management" today. This poster describes current challenges managing construction waste and offers possible solutions to minimize/mitigate/ameliorate its (negative) effects on the environment.

Improving Energy Efficiency In Residential Houses In Kosovo, Fatlum Rexhepi

International Programs

Buildings with poor insulation and infiltration in doors, windows, and other openings have very high heating and cooling demands. Due to lack of maintenance, building materials, and standard they are whopping consumers. The necessity to save energy is enormous, especially with newly environmental constrains. Moreover, this would not only save our natural resources, but it would cut large sums that households spend on electricity, gas, or coal. Thermodynamic calculation of heat gain and loss gave us a lucid picture of benefits respecting nearly zero energy buildings standards while comparing same building prior and after improving its envelope. The consumption after …

Recent Advances In Hydrothermal Carbonisation: From Tailored Carbon Materials And Biochemicals To Applications And Bioenergy, Sabina A. Nicolae, Heather Au, Pierpaolo Modugno, Hui Luo, Anthony E. Szego, Mo Qiao, Liang Li, Wang Yin, Hero J. Heeres, Nicole Berge, Maria Magdalena Titirici

Faculty Publications

Introduced in the literature in 1913 by Bergius, who at the time was studying biomass coalification, hydrothermal carbonisation, as many other technologies based on renewables, was forgotten during the "industrial revolution". It was rediscovered back in 2005, on the one hand, to follow the trend set by Bergius of biomass to coal conversion for decentralised energy generation, and on the other hand as a novel green method to prepare advanced carbon materials and chemicals from biomass in water, at mild temperature, for energy storage and conversion and environmental protection. In this review, we will present an overview on the latest …

Morphodynamics Of Transgressive Coastal Systems: Modeling Allogenic And Autogenic Response To Sea Level Rise, Storms, And Changes In Sediment Supply, Kevin C. Hanegan

LSU New Orleans Theses and Dissertations

Barrier islands are widespread and typically enclose landward basins connected to the ocean through tidal inlets. Low energy in the basin enables fine sediment accumulation and salt marsh formation. Sea Level Rise (SLR) causes loss of marshes due to their low elevations and inundation sensitivity. Both long-term trends in sediment supply due to SLR and episodic transfers of sediment due to storms are important to the sustainability of marshes and tidal basins. The trajectory of deltas, including the Mississippi River Delta (MRD), are also impacted by sediment supply. The redistribution of sediments (autogenic reorganization) within transgressive systems will determine their …

Visible-Light-Active Disinfection Of Surface Water Coliform Using Silver/Titanium Dioxide/Silver Bromide(Ag/Tio2/Agbr) As Photocatalyst, Ashraya Upadhyaya

LSU New Orleans Theses and Dissertations

As human population becomes diverse, the need for sustainable, inexpensive, scalable, and decentralized water treatment technologies to supplement or replace conventional treatment methods are important, especially to satisfy the need of small, rural communities for safe drinking water. These challenges can be somewhat met with the use of semiconductor photocatalysis, especially if the process is driven by visible light energy. Visible-light-active (VLA) photocatalysis can be effectively applied in disinfection of drinking water. In comparison to traditional, energy-intensive, physical and chemical disinfection methods, VLA photocatalysis is capable of providing high disinfection efficiency with the use of cheaper energy, no harmful by-products, …

Pooled-Fund Project No. Tpf-5(395), Genda Chen

INSPIRE-UTC Annual Meetings

The goals of the pooled-fund initiative are to engage closely with several state Departments of Transportation (DOTs) in the early stage of technology development at the INSPIRE University Transportation Center, and leverage the center resources to develop case studies, protocols, and guidelines that can be adopted by state DOTs for bridge inspection without adversely impacting traffic. The initiative involves the integration, field demonstration and documentation of a robotic system of structural crawlers, unmanned aerial vehicles, a multimodal unmanned vehicle, nondestructive devices, sensors, and data analytics. Depending on the interest of participating DOTs, the objectives of this initiative include, but are …

Vision-Based Non-Gps Uav Guidance For Bridge Inspection, Bo Shang

INSPIRE-UTC Annual Meetings

No abstract provided.

Uav-Based Smart Rock Localization For Determination Of Bridge Scour Depth, Haibin Zhang

INSPIRE-UTC Annual Meetings

First Place Award in recognition of outstanding achievement in the 2020 Annual Meeting Graduate Student Poster Competition sponsored by INSPIRE University Transportation Center

Bridge Inspection Video Data Analysis For Data-Driven Asset Management, Muhammad Monjurul Karim

INSPIRE-UTC Annual Meetings

Second Place Award in recognition of outstanding achievement in the 2020 Annual Meeting Graduate Student Poster Competition sponsored by INSPIRE University Transportation Center

Automatic Impact-Sounding Acoustic Inspection Of Concrete Structure, Jinglun Feng

INSPIRE-UTC Annual Meetings

No abstract provided.

Experimental Investigation Of A Novel Smart Shear Key For Earthquake And Tsunami Mitigation, Xinzhe Yuan

INSPIRE-UTC Annual Meetings

No abstract provided.

Autonomous Ultrasonic Thickness Measurement Of Steel Bridge Members Using Mobile Sensors, Yu Otsuki

INSPIRE-UTC Annual Meetings

Third Place Award in recognition of outstanding achievement in the 2020 Annual Meeting Graduate Student Poster Competition sponsored by INSPIRE University Transportation Center

Data-Driven Risk Assessment Of Bridges Subject To Corrosion And Scour, Yijian Zhang

INSPIRE-UTC Annual Meetings

No abstract provided.

Clamping Design For Bridge Inspection Robot Deployment Systems (Birds) Prototype Ii, Bo Shang

INSPIRE-UTC Annual Meetings

No abstract provided.

A Modeling Framework For Urban Growth Prediction Using Remote Sensing And Video Prediction Technologies: A Time-Dependent Convolutional Encoder-Decoder Architecture, Ahmed Hassan Jaad

Civil and Environmental Engineering Theses and Dissertations

Studying the growth pattern of cities/urban areas has received considerable attention during the past few decades. The goal is to identify directions and locations of potential growth, assess infrastructure and public service requirements, and ensure the integration of the new developments with the existing city structure. This dissertation presents a novel model for urban growth prediction using a novel machine learning model. The model treats successive historical satellite images of the urban area under consideration as a video for which future frames are predicted. A time-dependent convolutional encoder-decoder architecture is adopted. The model considers as an input a satellite image …

Optimizing The Methanotrophic Production Of Polyhydroxyalkanoates Using Mixed Microbial Bacteria Cultures, Kai Cheng

Civil and Environmental Engineering Theses and Dissertations

The use of petroleum-based plastics has caused serious economic and environmental problems. It is imperative to develop sustainable ways to produce valuable and environmentally-friendly materials. Methanotrophic bacteria are known for assimilating methane while generating polyhydroxybutyrate (PHB) biopolymers, which are potential substitutes for conventional plastics. Additionally, biologically generated methane and volatile fatty acids (VFAs) are abundant and readily accessible through anaerobic digestion of organic wastes. Thus, optimizing the methanotrophic production will bring significant economic and environmental benefits.

In section one, a feast-famine based cultivation system was adopted to produce PHAs using Hyphomicrobium, and Methylocysits dominated bacterial culture. The mixed bacterial culture …

Development Of A Nomogram To Predict The Maximum Contact Stress Between A Bridge I-Girder And A Support Roller, Thanin Chanmalai

Master's Theses

The incremental launching method (ILM) is one of the methods of bridge construction located in environmentally sensitive areas. During the bridge launching, there are significant contact stress issues at the contact regions between the launching system and the steel bridge girders. The Iowa River Bridge (IRB) is a case study of bridge construction that used the ILM during a steel I-girders installation. Contact stress can cause severe defects during launch, which can occur within the material where the material could be damaged.

Hertz contact theory is applied for calculating contact stress between two solid surfaces, which is initially derived from …

Bridge Resilience Assessment With Inspire Data, Iris Tien

INSPIRE-UTC Annual Meetings

Robotic data collection, both automated and remote, will enable post-disaster assessment of bridge components where it would normally be difficult and potentially dangerous for manual inspection by field workers to do so.

This project aims to develop and validate a new framework that uses the data collected from the robotic exploration of infrastructure, particularly after a disaster, to assess the condition of bridges and prioritize these structures for repair. This will improve the resilience of the transportation system to disasters by targeting bridge repairs and enabling resources to be distributed more effectively across the system for more rapid recovery after …

Climbing Robots With Automated Deployment Of Sensors And Nde Devices For Steel Bridge Inspection, Hung La

INSPIRE-UTC Annual Meetings

The PI was a research scientist/faculty at Rutgers University who successfully developed in 2014 a Robotic Assisted Bridge Inspection Tool (RABIT) for bridge deck inspections. Other bridge elements, such as girders and columns, or even underside of bridge decks are difficult to access and remain a challenge for efficient inspection. Like visual inspection, current practices for bridge maintenance are equally time consuming and expensive. Automation of simple maintenance actions such as bearing cleaning and concrete sealing with robots will lead to a leap forward to the next-generation strategy of bridge maintenance.

This project aims to develop and prototype automated climbing …

Bridge Inspection Robot Deployment Systems (Birds), Bo Shang

INSPIRE-UTC Annual Meetings

Climbing robots for both concrete and steel bridges and UAVs are being developed to support bridge inspection with advanced evaluation technologies at the INSPIRE University Transportation Center. They are mostly applicable to large open areas with little or no obstacles. For I-shaped beams or girders, climbing along the cross section of these structural members is not a trial task. In particular, a climbing robot may not have a sufficient footprint to make a safe turn from the inner to outer face of a top or bottom flange. In this case, an unmanned vehicle is conceived to facilitate I-girder inspection and …

Autonomous Wall-Climbing Robots For Inspection And Maintenance Of Concrete Bridges, Jizhong Xiao

INSPIRE-UTC Annual Meetings

Since 2002, the PI’s group has developed four generations of wall-climbing robots for NDE inspection of civil infrastructure. These robots combine the advantages of aerodynamic attraction and suction to achieve a desirable balance of strong adhesion and high mobility. They don’t require perfect sealing and can thus move on smooth and rough surfaces, such as brick, concrete, stucco, wood, glass, and metal. For example, Rise-Rover uses two drive modules to carry their middle compartment with payload up to 450 N. Ground penetrating radar (GPR)-Rover and Mini GPR-Rover are custom designed to carry a GSSI’s GPR antenna for subsurface defect detection …

Mobile-Manipulating Uavs For Sensor Installation, Bridge Inspection And Maintenance, Paul Oh

INSPIRE-UTC Annual Meetings

Mobile manipulating UAVs have great potential for bridge inspection and maintenance. Since 2002, the PI has developed UAVs that could fly through in-and-around buildings and tunnels. Collision avoidance in such cluttered near-Earth environments has been a key challenge. The advent of light-weight, computationally powerful cameras led to breakthroughs in SLAM even though SLAM-based autonomous aerial navigation around bridges remains an unsolved problem.

In 2007, the PI integrated a mobile manipulation function into UAVs, greatly extending the capabilities of UAVs from passive survey of environments with cameras to active interaction with environments using limbs. Mobile-manipulating UAVs have since been demonstrated to …

Hyperspectral Imaging Analysis Of Steel Corrosion, Abdullah Alhaj

INSPIRE-UTC Annual Meetings

No abstract provided.

A Hybrid-Climbing Robot For Steel Bridge Inspection, Thanh Son Nguyen

INSPIRE-UTC Annual Meetings

No abstract provided.

Human Collaborative Haptic-Based Mobile-Manipulating Uavs, Dongbin Kim

INSPIRE-UTC Annual Meetings

No abstract provided.

Uav Aerodynamics Simulation: Model Building And Analysis, Pu Jiao

INSPIRE-UTC Annual Meetings

No abstract provided.

Simulation Training And Control System For Bridge Inspection, Rahul Dubey

INSPIRE-UTC Annual Meetings

No abstract provided.

Integrated Sensing System Of Fe-C Coated Long Period Fiber Gratings For Mass Loss Measurement Of Steel Bars With Strain And Temperature Compensation, Chuanrui Guo

INSPIRE-UTC Annual Meetings

No abstract provided.

A Training Framework Of Robotic Operation And Image Analysis For Decision-Making In Bridge Inspection And Preservation, Ruwen Qin

INSPIRE-UTC Annual Meetings

Inspection and preservation of existing transportation infrastructure to extend their service life is an effective way of mitigating the pressure of steadily growing transportation demands on the aging infrastructure. Their current practice, though, represents one of the most costly operations in state departments of transportation.

The INSPIRE University Transportation Center will develop a remotely-controlled robotic platform that helps with these labor-intensive tasks and allows engineers to focus on decision-making processes. An important mission of INSPIRE is to leverage users’ capability of implementing, and interacting with, the robotic platform. Therefore, a long-term plan has been made to create a framework of …