Civil and Environmental Engineering Commons^™

A Microscopic Simulation Study Of Applications Of Signal Phasing And Timing Information In A Connected Vehicle Environment, Gwamaka Lameck Njobelo

UNF Graduate Theses and Dissertations

The connected vehicle technology presents an innovative way of sharing information between vehicles and the transportation infrastructure through wireless communications. The technology can potentially solve safety, mobility, and environmental challenges that face the transportation sector. Signal phasing and timing information is one category of information that can be broadcasted through connected vehicle technology. This thesis presents an in-depth study of possible ways signal phasing and timing information can be beneficial as far as safety and mobility are concerned. In total, three studies describing this research are outlined.

The first study presented herein focuses on data collection and calibration efforts of …

Evaluation Of Traffic Incident Timeline To Quantify The Performance Of Incident Management Strategies, Henrick Joseph Haule

UNF Graduate Theses and Dissertations

Transportation agencies are introducing new strategies and techniques that will improve traffic incident management. Apart from other indicators, agencies measure the performance of the strategies by evaluating the incidents timeline. An effective strategy has to reduce the length of the incident timeline. An incident timeline comprises various stages in the incident management procedure, starting when the incident was detected, and ending when there is the recovery of normal traffic conditions. This thesis addresses three issues that are related to the traffic incident timeline and the incident management strategies.

First, co-location of responding agencies has not been investigated as other incident …

Particle Filters For State Estimation Of Confined Aquifers, Graeme Field

UNF Graduate Theses and Dissertations

Mathematical models are used in engineering and the sciences to estimate properties of systems of interest, increasing our understanding of the surrounding world and driving technological innovation. Unfortunately, as the systems of interest grow in complexity, so to do the models necessary to accurately describe them. Analytic solutions for problems with such models are provably intractable, motivating the use of approximate yet still accurate estimation techniques. Particle filtering methods have emerged as a popular tool in the presence of such models, spreading from its origins in signal processing to a diverse set of fields throughout engineering and the sciences including …

Coupling Radio Frequency Energy Via The Embedded Rebar Cage In A Reinforced Concrete Structure For The Purpose Of Concrete Degradation Sensing, Ryan Campiz

UNF Graduate Theses and Dissertations

This study focuses on utilizing an energy harvesting system in which a dedicated Radio Frequency (RF) power source transmits RF power via rebar in a reinforced concrete column. The RF power is received and decoupled by a receiver, and is then rectified, boosted, and stored as electrical energy in a supercapacitor, later to be used to make measurements, process data, and communicate to the source via rebar. Two design attempts are presented in this study: (a) one uses single line conduction at 2.4 GHz for RF power transfer; (b) the other uses a more conventional two-line conduction at 8.0 kHz …

An Integrated Closed Convergent System For Optimal Extraction Of Head-Driven Tidal Energy, Michelle Ann Vieira

UNF Graduate Theses and Dissertations

As the demands for energy increased with the global increase in population, there is a need to create and invest in more clean and renewable energy sources. Energy derived from the movement of the tides is an ancient concept that is currently being harnessed in a handful of large tidal range locations. However, the need to move from fossil fuel driven energy sources to those that are clean and non-polluting is a priority for a sustainable future. Globally, hydropower potential is estimated to be more than 16,400-Terawatt hours annually. Given that the electricity consumption worldwide was at 15,068-Terawatt hours in …

The Role Of Wave Self-Similarity In Nearshore Wave Spectra, Morgan M. Smith

UNF Graduate Theses and Dissertations

Nonlinear wave-wave interactions and wave breaking contribute to nearshore wave energy dissipation. These factors can be analyzed by the principles of wave self-similarity. The equilibrium range can be shown in wind-driven wave spectra that exist in the form ( ) and However, the appropriate methods used to determine this loss of energy are controversial. This study examines an approach that reinvestigates the self-similarity principles. Wave spectra with lower peak periods are dominated by nonlinear wave-wave interactions which produce a scaling in shallow water. This thesis investigates the relative role of spectral similarity in different conditions in the nearshore region of …

Development Of A One-Way Coupled Diffraction/Trapped Air Model For Predicting Wave Loading On Bridge Superstructure Under Water Wave Attack, Christian Hillary Matemu

UNF Graduate Theses and Dissertations

In recent years, a number of researchers have applied various computational methods to study wind wave and tsunami forcing on bridge superstructure problems. Usually, these computational analyses rely upon application of computational fluid dynamic (CFD) codes. While CFD models may provide reasonable results, their disadvantage is that they tend to be computationally expensive. During this study, an alternative computational method was explored in which a previously-developed diffraction model was combined with a previously-developed trapped air model under worst-case wave loading conditions (i.e. when the water surface was at the same elevation as the bottom bridge chord elevation). The governing equations …

Soil Improvement Using Microbial Induced Calcite Precipitation And Surfactant Induced Soil Strengthening, Matthew P. Davies

UNF Graduate Theses and Dissertations

Microbially induced calcite precipitation (MICP) has been used for a number of years as a technique for the improvement of various geological materials. MICP has been used in a limited capacity in organic rich soils with varying degrees of success. Investigators hypothesized that microbially-induced cementation could be improved in organic soils by using a surfactant. Varying amounts of Sodium Dodecyl Sulfate (SDS) were added to soils of varying organic content and a mixing procedure was used to treat these soils via MICP. Treated specimens were tested for unconfined compressive strength (UCS). Results appeared to show direct relationships between SDS content …

Potential Replacement Of The Us Navy's Rapid Penetration Test With The Method Of Multichannel Analysis Of Surface Waves, William Fletcher

UNF Graduate Theses and Dissertations

The United States Navy (USN) currently utilizes a Rapid Penetration Test (RPT) on both land and in water as the means to determine whether sufficient soil bearing capacity exists for piles in axial compression, prior to construction of the Elevated Causeway System (Modular) [ELCAS(M)] pile-supported pier system. The USN desires a replacement for the RPT because of issues with the method incorrectly classifying soils as well as the need to have a less labor-and-equipment-intensive method for geotechnical investigation.

The Multichannel Analysis of Surface Waves (MASW) method is selected herein as the potential replacement for the RPT. The MASW method is …

A Novel Design To Harness Water-Wave Energy, Abdallah El Safty, Abdallah Walid El Safty

UNF Graduate Theses and Dissertations

Renewable energy sources are essential to our future, not only because they generally minimize harm to our environment but are also a relatively free source of energy that are available for generations to come. Wind and solar energy are proven sources of renewable energy, but both are highly variable. On the other hand, water wave energy is relatively persistent in locations around the world. Many researchers have tried to capture the energy of ocean waves, some were successful, but most were not. Harnessing wave energy is not a simple matter. One must design systems that can withstand the extreme forces …

Development Of Forward And Inversion Schemes For Cross-Borehole Ground Penetrating Radar, Donald Jones

UNF Graduate Theses and Dissertations

Tomography is an imaging technique to develop a representation of the internal features of material using a penetrating wave, such as an electromagnetic wave. The calculation method used is an example of an inverse problem, which is a system where the input and the output are known but the internal parameters are not. These parameters can be estimated by understanding the responses of a penetrating wave as it passes through the unknown media. A forward problem is just the opposite; the internal structure and input penetrating wave is known and the output is determined. For both forward and inverse problems, …

Torsional Behavior Of Rc Beams Strengthened With Pbo-Frcm Composite, Meyyada Y. Alabdulhady

Doctoral Dissertations

"Externally bonded fiber reinforced cementitious matrix (FRCM) composites have been investigated recently as an alternative to fiber reinforced polymer (FRP) composites to overcome certain shortcomings such as the inability to install on wet surfaces or in low temperatures, low fire resistance, low glass transition temperature, low reversibility, and lack of vapor permeability. This study includes an inclusive investigation of the torsional behavior of RC beams strengthened with externally bonded polyparaphenylene benzo-bisoxazole (PBO)-FRCM composite material. A comprehensive review and discussion of the previous experimental, analytical, and numerically-simulated torsional behavior of RC beams strengthened with FRP composite was introduced to gain a …

Behavior And Temporal-Based Effects Of Sustainable Self-Consolidating Concrete In Bridge Structures, Hayder Hussein Alghazali

Doctoral Dissertations

"The main objective of this study was to investigate the performance of sustainable self-consolidating concrete (SCC) for highway bridge structures. Two types of concrete were utilized in this study: high volume fly ash-self consolidating concrete (HVFA-SCC) and high strength-self consolidating concrete (HS-SCC). This dissertation consists of two major parts: a laboratory study developing and investigating the overall performance of HVFA-SCC and a field study of time-dependent field-based behavior of HS-SCC in Bridge A7957 MO, USA. In the first part, an experimental program was conducted to develop a new class of SCC incorporating up to 70% cement replacement with fly ash. …

Bio-Inspired Geomaterial Improvement And Development Of Innovative Characterization Methods, Junnan Cao

Doctoral Dissertations

"This study experimentally investigated the bio-inspired improvement on geomaterials, including enzyme induced calcite precipitation (EICP) and biopolymers. This study also developed several innovative characterization tools to advance the state-of-the-art testing techniques, including SIP-BE column, rotational sedimental panel, and backpressure saturated constant hydraulic gradient break through column. Firstly, EICP test was performed on Ottawa 50-70 sand in a newly developed SIP-BE column. Nondestructive techniques -- spectral induced polarization (SIP) and bender element were used to monitor the precipitation process and shear wave velocities (V_s). SIP, V_s, and SEM results all suggest contact cementation as the preferential precipitation …

Dragline Excavation Simulation, Real-Time Terrain Recognition And Object Detection, Godfred Somua-Gyimah

Doctoral Dissertations

"The contribution of coal to global energy is expected to remain above 30% through 2030. Draglines are the preferred excavation equipment in most surface coal mines. Recently, studies toward dragline excavation efficiency have focused on two specific areas. The first area is dragline bucket studies, where the goal is to develop new designs which perform better than conventional buckets. Drawbacks in the current approach include operator inconsistencies and the inability to physically test every proposed design. Previous simulation models used Distinct Element Methods (DEM) but they over-predict excavation forces by 300% to 500%. In this study, a DEM-based simulation model …

Quantitative Phase-Field Modeling Of Crack Propagation In Multi-Phase Materials, Arezoo Emdadi

Doctoral Dissertations

”Research presented in this dissertation is focused on developing and validating a computational framework for study of crack propagation in polycrystalline composite ceramics capable of designing micro-architectures of phases to improve fracture toughness and damage tolerance of ZrB₂-based ultra-high temperature ceramics (UHTCs). A quantitative phase-field model based on the regularized formulation of Griffith’s theory is presented for crack propagation in homogenous and heterogeneous brittle materials. This model utilizes correction parameters in the total free energy functional and mechanical equilibrium equation within the crack diffusive area to ensure that the maximum stress in front of the crack tip is …

Shear Performance And Behavior Of Long Carbon Fiber Reinforced Concrete, Benjamin Paul Gliha

Doctoral Dissertations

”In this study, a laboratory testing program was developed to investigate the shear performance of fiber reinforced concrete beams. Long carbon fibers, to be included with a traditional fresh concrete mix, were developed and their shear performance was evaluated and compared to the performance and behavior of unreinforced concrete, traditionally reinforced concrete, and fiber reinforced concrete (FRC) with other fiber types.

The experimental program consisted of 30 large-scale beams tested for shear performance under monotonic loading. In addition to the large-scale beams, small-scale specimens were constructed of the same materials to correlate large-scale performances to ASTM C1609 testing and to …

Critical Buckling And Post-Buckling Behavior Of Thin-Walled Liners Encased By Underground Pipelines In Saturated Soils, Zhaochao Li

Doctoral Dissertations

"This study aims to investigate the structural stability of thin-walled liners encased in functionally-obsolete underground pipelines in saturated soil under external hydrostatic pressure, a concentrated load, temperature change or their combination, and develop a simplified circular arch model of thin-walled liners when not constrained by the pipelines. The friction and adhesion on the interface between a liner and its constraining surface (pipeline or grouting), and the pressure gradient on deeply-buried pipelines are neglected. The critical buckling load of elastic liners is analytically derived under a plane strain condition using the principle of minimum potential energy. The analytical solution is either …

Atomic Layer Deposition Prepared Nanostructured Materials For Various Catalytic Reactions, Xiaofeng Wang

Doctoral Dissertations

"Atomic layer deposition (ALD) has been widely used for thin film coating and metal nanoparticles (NPs) preparation. In this report, the applications of ALD prepared nanostructured materials in catalysis were examined.

Highly dispersed Pt monometallic catalysts with different substrates and multi-walled carbon nanotubes (MWCNTs) supported Pt-Co bimetallic catalysts were synthesized by ALD for selective hydrogenation of α, β-unsaturated aldehydes to unsaturated alcohols (UA). Pt/MWCNTs showed the highest selectivity of UA in selective hydrogenation of citral, as compared to Pt/SiO₂, Pt/ALD-Al₂O₃, and Pt/γ-Al₂O₃. After adding Co, the highest selectivity was achieved …

Long-Term Behavior Of Fiber Reinforced Polymer (Frp) Confined Concrete Cylinders Subjected To Severe Weather And Seawater Solution Conditions, Song Wang

Doctoral Dissertations

"This study presents an experimental investigation on durability of fiber-reinforced polymer (FRP) confined concrete cylinders subjected to various environmental conditions. Two types of cylinders were tested in this experiment: concrete-filled FRP tube (CFFT) and hollow-core FRP-concrete-steel (HC-FCS), with FRP tubes having two different constitutive resin components: polyester and epoxy. The specimens were subjected to three different environmental conditions: combined freeze/thaw, wet/dry and heating/cooling cycles with options of continuous water immersion and sustained axial load in an environmental chamber, UV exposure in an UV chamber, and seawater immersion in water tanks with sustained axial load. Mechanical and material characterization tests were …

Terahertz Imaging Of Thin Film Layers With Matched Field Processing, Scott Schecklman, Lisa M. Zurk

Electrical and Computer Engineering Faculty Publications and Presentations

Terahertz (THz) time of flight (TOF) tomography systems offer a new measurement modality for non-destructive evaluation (NDE) of the subsurface layers of protective coatings and/or laminated composite materials for industrial, security and biomedical applications. However, for thin film samples, the time-of-flight within a layer is less than the duration of the THz pulse and consequently there is insufficient range resolution for NDE of the sample under test. In this paper, matched field processing (MFP) techniques are applied to thickness estimation in THz TOF tomography applications, and these methods are demonstrated by using measured THz spectra to estimate the the thicknesses …

Effect Of Vessel-Generated Waves In Near Low Tide Conditions On Shorelines In The Intracoastal Waterways, Mackenzie Lee Sanchez

UNF Graduate Theses and Dissertations

Erosion is caused when there is a net loss of sediment in a coastal system, i.e. when the amount of sediment leaving a system is more than the amount of sediment entering that same system. This investigation will focus on vessel-generated waves and their effect on the shorelines of the Jacksonville, Florida Intracoastal Waterways near low tide conditions. The investigation conducted herein examines variations in turbidity and pressure measurements in response to passing vessels at a single site location previously selected in 2016. The primary water/shoreline interaction recorded during this investigation is located below the visible scarp (near low tide …

Investigation Of Near-Bottom Current Characteristics Along An Open-Ocean Coast, Nikole S. Ward

UNF Graduate Theses and Dissertations

Near-bottom current data was collected over a period of 8 years at the U.S. Army Corps of Engineers Field Research Facility in Duck, North Carolina. This data set consisted of currents measured up to three elevations above the bottom at deployment depths of 5 meters, 8 meters and 13 meters, as well as continuous real-time wind and wave data collected at the pier. The data was collated, quality checked and analyzed to define a climatology of near bottom currents along the study area using current moments. This data set had previously never been available for analysis due to the large …

Impact Of Critical Path Method (Cpm) Of Scheduling On On-Time Completion Of Transportation Projects, Fahim Ahmed

Theses and Dissertations

This study addresses the effectiveness of Critical Path Method (CPM) scheduling on project delivery. Specifically, the on-time completion of projects with and without a CPM schedule is explored. The paper uses data from 2,097 South Carolina transportation projects let after February 2008 and substantially completed by August 2015. The delay analysis uses the original contract completion date as well as the completion date adjusted by change orders. Chi-Squared tests are used to examine the relationship between CPM scheduled projects and delayed projects, and t-tests are used to compare the mean delay (in days) between CPM scheduled and unscheduled projects. The …

Evaluation Of Sonocatalytic Degradation Of Ibuprofen And Sulfamethoxazole In The Presence Of Various Catalysts, Yasir Alhamadani

Theses and Dissertations

Over the last two decades, large quantities of products, such as medicines, disinfectants, and personal care products, have been released into surface waters and wastewater treatment facilities by the pharmaceutical and chemical industries which have come to the attention of scientists with regard to their impacts on life in lakes, rivers, and groundwater. Among various types of treatment processes, ultrasonic (US) treatment process was used in this study to investigate the effect catalysts and removal of selected pharmaceutical’s (PhACs) compounds (ibuprofen (IBP) and sulfamethoxazole (SMX)). Carbon nanomaterials (CNMs) have become candidates for numerous applications in nanocomposites, microelectric devices, sensors, energy …

Modeling The Impacts Of Sea Level Rise On Storm Surge Inundation In Flood-Prone Urban Areas Of Hampton Roads, Virginia, Luca Castrucci, Navid Tahvildari

Civil & Environmental Engineering Faculty Publications

Hampton Roads is a populated area in the United States Mid-Atlantic region that is highly affected by sea level rise (SLR). The transportation infrastructure in the region is increasingly disrupted by storm surge and even minor flooding events. The purpose of this study is to improve our understanding of SLR impacts on storm surge flooding in the region. We develop a hydrodynamic model to study the vulnerability of several critical flood-prone neighborhoods to storm surge flooding under several SLR projections. The hydrodynamic model is validated for tide prediction, and its performance in storm surge simulation is validated with the water …

Analysis On The Influence Factors Of Accident Severity: Evidence From Urban River-Crossing Tunnels In Shanghai Of China, Wan He, Zhuoye Zhang, Linjun Lu, Zhenyu Wang

CUTR Faculty Journal Publications

To analyze various factors influencing the accident severity of urban river-crossing tunnels, 12 influence factors were selected according to the three traffic elements of vehicle, road, and environment, including accident-involved vehicle type, tunnel length, tunnel speed limit, accident occurrence time, and weather. These factors were based on the historical data of 14 urban river-crossing tunnels in Shanghai. A binary logistic regression model was also utilized to identify significant influence factors and analyze the influence degrees of their accident severity. Significance analysis reveals that accident occurrence place, accident-involved vehicle type, tunnel speed limit, number of vehicles involved, and accident type are …

Manufacturing Applications Of The One-Dimensional Cutting Stock Problem As A Team Project, Hüseyin Sarper, Nebojsa I. Jaksic

Electrical & Computer Engineering Faculty Publications

This paper explains the beneficial and practical impact of operations research in two real manufacturing settings. Two manufacturing examples used in student projects were (1) cutting rails (80‘ or 40‘) to manufacture railroad frogs of many sizes and (2) cutting round metal rolls (12‘ to 20‘) to meet customer demands for various lengths of cuts. Student teams in Engineering of Manufacturing Processes and Operations Research courses wrote computer programs. The program first identified all possible patterns that can be cut out of a given stock length. Next, the program created a mathematical model (a text file) as an output. This …

Analysis Of Cracked Body Repaired By Adhesively Bonded Patches By Bem-Fem Coupling, Binh Viet Pham

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis presents an efficient numerical technique capable of handling the stress analysis of three-dimensional cracked bodies strengthened or repaired by adhesively bonded patches. The proposed technique is implemented within the framework of the coupling of the weakly singular boundary integral equation method and the standard finite element procedure. The former is applied to efficiently treat the elastic body containing cracks whereas the latter is adopted to handle both the adhesive layers and the patches. The approximation of the near-front relative crack-face displacement is enhanced by using local interpolation functions that can capture the right asymptotic behaviour. This also offers …

The Relationship Of Influential Factors On Material Management Effectiveness In Building Construction Projects: Case Study In Vietnam, Bao Van Pham

Chulalongkorn University Theses and Dissertations (Chula ETD)

The improvement of management processes in construction could be seen as one of the important keys to project success in which material management should be appropriately taken into consideration. Although many previous research studies have examined the components of construction material management, the relationship of factors influencing material management effectiveness has not been explored. This study was carried out to identify influential factors on material management effectiveness and develop a model to explain the relationships between these factors and the effectiveness of material management based on practical projects. The research method included the collection of contractors' opinions in building projects …