Civil and Environmental Engineering Commons^™

Inclusion Of An Introduction To Infrastructure Course In A Civil And Environmental Engineering Curriculum, Esmaeili Behzad, Philip J. Parker, Steven D. Hart, Brooke K. Mayer, Led Klosky, Michael R. Penn

Civil and Environmental Engineering Faculty Research and Publications

Civil infrastructure refers to the built environment (sometimes referred to as public works) and consists of roads, bridges, buildings, dams, levees, drinking water treatment facilities, wastewater treatment facilities, power generation and transmission facilities, communications, solid waste facilities, hazardous waste facilities, and other sectors. Although there is a need to train engineers who have a holistic view of infrastructure, there is evidence that civil and environmental engineering (CEE) programs have not fully addressed this increasingly recognized need. One effective approach to address this educational gap is to incorporate a course related to infrastructure into the curriculum for first-year or second-year …

Studies Of Hypervelocity Impact Phenomena As Applied To The Protection Of Spacecraft Operating In The Mmod Environment, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In keeping with the tradition of the Hypervelocity Impact Society, this paper is a written version of the keynote address I presented at the start of 2015 Hypervelocity Impact Symposium as the recipient of the Society's Distinguished Scientist Award. It covers the highlights of my nearly 30 year career working in the area of hypervelocity impact phenomenology, mainly as it is applied to the protection of humans and spacecraft that work an operate in the micrometeoroid and orbital debris (MMOD) environment.

Ballistic Limit Equations For Non-Aluminum Projectiles Impacting Dual-Wall Spacecraft Systems, William P. Schonberg, J. Martin Ratliff

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

One of the primary design considerations of earth-orbiting spacecraft is the mitigation of the damage that might occur from an on-orbit MMOD impact. Traditional damage-resistant design consists of a 'bumper' that is placed a small distance away from a spacecraft component or from the wall of the element in which it is housed. The performance of such a multi-wall structural element is typically characterized by its ballistic limit equation (BLE), which defines the threshold particle size that results in a failure of the spacecraft element. BLEs are also key components of any micro-meteoroid/orbital debris (MMOD) risk assessment calculations. However, these …

In-Service Evaluation Of High Tension Cable Barrier Systems, Brian K. Howell, Kenneth R. Agent, Jeff Jasper, William Nicholas Staats

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet has installed hundreds of miles of high-tension cable median barrier (CMB) as a safety innovation. The usage of CMB aids in the prevention of crossover crashes, where a vehicle departs the roadway on the left shoulder, crosses the median, and enters the opposing lane(s) of traffic. KYTC officials have questioned whether all three barrier products perform similarly. Some installed cable barrier systems have lost tension across the entire cable length after a single vehicle impact. If a second vehicle were to strike the cable barrier system in a location other than the damaged area of the …

In-Vehicle Evaluation Of Rumble Strips In Pre-And Post-Chip Sealed Maintenance Periods, Ernest Tufuor, Laurence Rilett

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Chip sealing will reduce the depth of rumble strips (RS) by approximately 1/8".  Will this depth reduction affect RS functional characteristics (audible and tactile warnings)?

There is no detailed study on the effectiveness of RS that have been chip sealed. USEFULNESS The results will be useful to the Nebraska Department of Roads to determine:

Operations: Whether RS will need to be re-milled after chip sealing. Cost & safety implications.

Design: New RS guidelines for highways expected to be chip sealed in the future.

It can be shown that a 1/8" reduction in the current milled RS design depth, as …

A Household Daily Non-Mandatory Activity Participation And Duration Modeling Accounting For Person Level Budget Constraints, Ivana Vukovic

Civil & Environmental Engineering Theses & Dissertations

A key methodological and behavioral innovative component in recent Activity-Based Models (ABMs) used for transportation planning is the household-level non-mandatory activity participation component. While traditional ABMs use a series of simple models to predict non-mandatory activity participation decisions in a sequential manner (which is often not correct), the Multiple Discrete Continuous Extreme Value (MDCEV) model can model both individual and joint non-mandatory activity participation and time allocation decisions in different out-of-home activities of all household members simultaneously. A key advantage of the MDCEV framework is that it accounts for complex intra-household interactions among different household members by allocating the total …

Implementing Online Updating To Complex Hysteresis Models In Real- Time Hybrid Simulation Using Constrained Unscented Kalman Filter, Bilal Ahmed Mohammed

Masters Theses

Although conventional experimental methods, such as quasi-static testing, shake table testing, etc., perform well to evaluate structural seismic performance necessary for modern seismic design, the quasi-static loading and/or reduced scale specimen used in shake table testing may not provide true dynamic responses of structural systems. To overcome these limitations, real-time hybrid simulation (RTHS) was developed, which is a combination of physical testing of the experimental substructure and analytical simulation of the numerical substructure. With the advancement of hybrid simulation, it is now possible to economically test large to full-scale specimens in laboratories at the real earthquake rate. Online model updating …

How Student Written Communication Skills Benefit During Participation In An Industry-Sponsored Civil Engineering Capstone Course, Ryan N. Fries, Bradford Cross, Jianpeng Zhou, Chad Verbais

SIUE Faculty Research, Scholarship, and Creative Activity

Because many engineering programs use capstone design courses and value strong communication abilities, authors sought to identify how student written communication skills changed because of industry-sponsored capstone design projects. A student exit survey was collected at the end of the capstone design course during faculty-led projects and projects led by practicing engineers in industry. These results led the researchers to subsequently evaluate two semesters of before-andafter writing samples using a rubric. Student surveys suggested a statistically significant increase in learning about professional issues, problem solving, and written/oral communication. Evaluation of student writing samples suggests that the students significantly improved their …

A Mechanistic-Empirical Impact Analysis Of Different Truck Configurations On A Jointed Plain Concrete Pavement (Jpcp), Lubinda F. Walubita, Tito P. Nyamuhokya, Stefan A. Romanoschi, Xiaodi Hu, Mena I. Souliman

Civil Engineering Faculty Publications and Presentations

Until the last decade, the 1993 American Association of State Highway and Transportation Officials (AASHTO) design guide has been traditionally used for the design of flexible and rigid pavements in the USA and some parts of the world. However, because of its inability to meet the new traffic and material challenges, a Mechanistic Empirical Pavement Design Guide (MEPDG) was introduced based on an NCHRP 1-37 A study conducted in 2004. This study used the MEPDG software and associated models to determine, through comparative truck damage analysis, the effects of nine different truck configurations on a 12 inch-jointed plain concrete pavement …

Emerging Pollutants In The Columbia River: A Simple Assessment Of Nonpoint Source Zones, Chulgi Kim

Civil and Environmental Engineering Undergraduate Honors Theses

Water quality modeling in the Columbia River Basin was conducted at the confluence of the Willamette and Columbia Rivers, river mile 101. The study area for this research consists of Sauvie Island, OR, and the surrounding areas of Vancouver, WA. Analysis of the region’s watershed and simple hydrologic calculations allowed for estimates of potential sources contributing to PBDEs in the Columbia River along river mile 101. This research included assessment of rainfall patterns and peak discharge rates in the areas along the rivers. A simple model of overland flow for the watershed was applied to estimate the area’s contribution to …

Evaluation Of Tack Coating Practices For Asphalt Overlays In Nebraska, Soroosh Amelian, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

The strength of the bond between asphalt layers affects the lifespan of pavement structures. It is also a key factor in preventing major pavement distresses, such as slippage cracking and delamination. This research project evaluates and compares the effectiveness and performance of different tack coating approaches to ensure the proper bond strength is achieved in asphalt concrete (AC) interlayers through an experimental study. Various tack coat materials, including different types of emulsified asphalt and asphalt binders, at multiple application rates and dilution ratios were investigated. In the first part of this study, laboratory-prepared samples were used to evaluate the sensitivity …

Evaluation Of Protection Of Frp Wrap On Bridge Piers From Corrosive Effects Of Snow And Ice Chemicals, Lizzie Miller

Honors Theses

Highway bridge components, such as decks and piers, are structures that are often exposed to chlorine-heavy chemicals. Corrosion of rebar, one of the main contributors to structural deficiencies in highway bridges, is largely caused by chloride contamination from exposure to deicing salts and chemicals. Current forms of external protection to highway bridge piers include paint coatings, shells, and wraps. This thesis will focus on the protective capabilities that Fiber Reinforced Polymer (FRP) wraps could provide to bridge piers. ASTM C666 was utilized to recreate environmental conditions, during which concrete samples were exposed to calcium chloride. ASTM C1760-12 was utilized to …

A Plastic Design Method For Rc Moment Frame Buildings Against Progressive Collapse, Hadi Faghihmaleki

Makara Journal of Technology

In this study, progressive collapse potential of generic 3-, 8- and 12-storey RC moment frame buildings designed based on IBC-2006 code was investigated by performing non-linear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when the second floor column was suddenly removed. Then, the size of beams required to satisfy the failure criteria for progressive collapse was obtained by using the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of …

In Vitro Toxicity Evaluation Of Caffeine Imprinted Polymer (Caf-Mip) For Decaffeination Method On Normal Chang Liver Cells, Fatimah Hashim, Faizatul Shimal Mehamod, Naizatul Akmal Nawi

Makara Journal of Technology

Over consuming of caffeine is one of the factors to a few health problems such as insomnia, hypertension and cardiovascular disease. This preliminary study was conducted to evaluate the Caffeine-Imprinted Polymer (CAF-MIP) toxicity that was synthesized for a new alternative method for decaffeination. It is crucial to evaluate the toxicity of CAF-MIPas this product is potential to be used as complimentary with any drinks containing caffeine. In this study, the CAF-MIP toxicity potential was confirmed on Normal Chang Liver cell (NCLC) based on its IC50 value andacridine orange and propidium iodide (AO/PI) staining for mode of cell death observation.Proliferation assay …

Sorption And Ion Exchange Behaviour Of Natural Zeolite Packing, Chandra Wahyu Purnomo, Bernice Lenora, Wiratni Budhijanto, Hirofumi Hinode

Makara Journal of Technology

It is well known that zeolite is an efficient metal ions adsorbent. The excess charge of the zeolite building blocks i.e. (AlO4)-5 and (SiO4)-4 creating a negative surface charge that attract metal cations. Beside the surface charge, zeolite also has three dimensional pore structure and reasonably large surface area which also can be used as adsorption sites. Ease of cation uptake make it suitable for many process with adsorption and desorption application. This study was conducted to observe the sorption and ion exchange behaviour of zeolite-betonite rings toward iron and cobalt cations. The results shows that the adsorption patterns follow …

Semicoupled Modeling Of Interaction Between Deformable Tires And Pavements, Jaime Hernandez, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

The interaction between deformable tires and pavements was studied using finite-element modeling and a semicoupled approach. Three finite-element models were used: (1) a hyperelastic tire rolling on an infinitely rigid surface; (2) a three-dimensional pavement model; and (3) a hyperelastic tire rolling on a deformable viscoelastic body. The tire and pavement models have been successfully compared with experimental measurements. Tire interaction with a rigid surface provided contact stresses to excite the pavement model, and results of the pavement model defined the boundary conditions of the tire rolling on the deformable body. After that, the pavement loaded with the contact stresses …

Energy–Water Reduction And Wastewater Reclamation In A Fluid Milk Processing Facility, Carly Rain Adams, Yulie E. Meneses, Bing Wang, Curtis L. Weller

Department of Food Science and Technology: Dissertations, Theses, and Student Research

The energy-water nexus is the inseparable connection linking water and energy. We are faced with a unique opportunity to co-manage these resources, as conservation of one is directly linked to the conservation of its counterpart. Therefore, immediately facing this critical challenge, will lead to tangible impacts on the water and energy crisis our food system is faced with. Determining the role of water and energy in the food industry has proved to be the starting point for reducing the distance between process productivity and resource efficiency. Therefore, this research focuses on determining opportunities for water-energy optimization and wastewater reduction and …

Evaluating The Bond Behavior Between Frp And Grooved Concrete Specimens Using Single Shear Pull Out Test, John Omboko

Master's Theses (2009 -)

Surface preparation affects the bond behavior between Fiber Reinforcing Polymer (FRP) composite material and concrete. In this research, a special type of surface preparation known as grooving, which involves cutting transverse grooves, is conducted on concrete blocks (specimens) that are categorized as either Unfilled (U) or Filled (F). This idea is to ascertain how the grooves affect the strength of FRP-bonded-concrete specimen. These two categories are then benchmarked to control (C) specimens which do not have grooves on them. Category U specimens only have the epoxy applied on the concrete surface while category F specimens have epoxy applied on both …

Biosolids-Derived Biochar For Micropollutant Removal From Wastewater, Lee Kimbell

Master's Theses (2009 -)

Trace organic compounds including antibiotics, hormones, pharmaceuticals and personal care products are discharged to the environment with liquid and solid effluent streams from water resource recovery facilities. These compounds are referred to as micropollutants, and can have negative impacts in receiving waters. Current wastewater treatment processes are not specifically designed to remove micropollutants, and many of these compounds are recalcitrant to conventional treatment technologies. Triclosan (TCS) was selected as a representative micropollutant in this study due to frequent detection in liquid effluents, residual biosolids, and surface waters. Pyrolysis - the thermochemical decomposition of organic matter at elevated temperatures in the …

Full-Scale Pavement Testing Of Aggregate Base Material Stabilized With Triaxial Geogrid, Shaun Todd Hilton

Theses and Dissertations

The objective of this research was to investigate the structural capacity of aggregate base materials stabilized with triaxial geogrid placed in a full-scale pavement involving control, or unstabilized, sections. Field testing was performed on a roadway in northeastern Utah that was 16 km (10 miles) long and included 10 test sections, seven stabilized sections and three control sections, each having five test locations. The pavement structure was comprised of a hot mix asphalt layer overlying an untreated aggregate base layer of varying thickness, depending on the test section. Except for the control sections, one or two layers of geogrid were …

Strut-And-Tie Modeling Of Multistory, Partially-Grouted, Concrete Masonry Shear Walls With Openings, Jeffrey Ryan Buxton

Theses and Dissertations

Construction practices are constantly evolving in order to adapt to physical locations and economic conditions. These adaptations may result in more cost-effective designs, but may also come at a cost of strength. In masonry shear walls, it is becoming more common to reduce the amount of grouting from every cell to only those with reinforcement, a practice known as partial-grouting. Partially-grouted masonry responds differently and in a more complex matter to lateral loads as compared to fully-grouted masonry. The response is made even more complex by wall discontinuities in the form of openings. The main objective of this study is …

The Effect Of Transit-Oriented Development Siteson Residential Home Pricing, Bradley S. Randall

Theses and Dissertations

For a number of years residential and commercial development has grown surrounding railways stations in many cities across the United States. One of the trends that has occurred in a number of cities relates to positive property value correlations between real estate values near transit stations and transit-oriented development (TOD) sites as compared to their counterparts not located near a railway station or freeway access. Many cities have noted that homeowners are willing to pay more to be near a TOD site and being near a site can represent a statistically significant factor in determining where to purchase a property. …

Structural Lightweight Grout Mixture Design, Hannah Jean Polanco

Theses and Dissertations

This research focused on designing a grout mixture using lightweight aggregate that achieves the minimum 28-day compressive strength required for normal-weight grout, 2000 psi. This research specifically studied the effects of aggregate proportion, slump, and aggregate soaking on the compressive strength of the mixture. The variable ranges investigated were 3-4.75 parts aggregate to cement volumetrically, 8-11 in. slump, and 0 and 2 cycles of soaking. The statistical model developed to analyze the significance of variable effects included a three-way interaction between the explanatory variables. All three explanatory variables had a statistically significant effect on the grout compressive strength, but the …

Seismic Analysis Of And Provisions For Dry-Stack Concrete Masonry Wall Systems With Surface Bond In Low-Rise Buildings, Joseph G. Eixenberger

Theses and Dissertations

Masonry is one of the oldest forms of construction materials that is still in use today. However, construction practices in the modern age demand faster and more economical practices. Dry-stack masonry, or masonry that doesn't use mortar to bind the blocks together, is a unique system to make masonry more economical. Though several systems of dry-stack masonry have been suggested little to no data exists as most of these systems are patented. This research used dry-stacked normal weight concrete masonry units with an eccentrically placed reinforcement. The wall system is connected through a surface bond and lacks any geometric connection. …

Remote Measurements Of Tides And River Slope Using An Airborne Lidar Instrument, Austin S. Hudson, Stefan A. Talke, Ruth Branch, Chris Chickadel, Gordon Farquharson, Andrew Jessup

Civil and Environmental Engineering Faculty Publications and Presentations

Tides and river slope are fundamental characteristics of estuaries, but they are usually undersampled due to deficiencies in the spatial coverage of water level measurements. This study aims to address this issue by investigating the use of airborne lidar measurements to study tidal statistics and river slope in the Columbia River estuary. Eight plane transects over a 12-h period yield at least eight independent measurements of water level at 2.5-km increments over a 65-km stretch of the estuary. These data are fit to a sinusoidal curve and the results are compared to seven in situ gauges. In situ– and lidar-based …

Encapsulation Process Of Propolis Extract By Casein Micelle Improves Sunscreen Activity, Muhamad Sahlan, Dara Dienayati, Darul Hamdi, Soraya Zahra, Heri Hermansyah, Malyn Chulasiri

Makara Journal of Technology

Propolis, a wax bee glue, have antioxidant activity and effective as broad spectrum UVB and UVA photoprotection sunscreens agent. To improve photoprotection activity in sunscreen cream, the propolis was encapsulated by casein micelle. The Indonesian propolis was extracted by ethanol and separated the wax by freeze precipitation. The extract was encapsulated by casein and reduced their size by ball mill homogenizer with the encapsulation efficiency about 80% and size of particles about 80 nm. The particles was applied in sunscreen cream, evaluate their stabillity and photoprotection activity Sun Protection Factor (SPF) spectrophotometer (Optometric 290s). The results shows that the selected …

Nano-Channels Early Formation Investigation On Stainless Steel 316ti After Immersion In Molten Pb-Bi, Abu Khalid Rivai, Mardiyanto Mardiyanto, Annette Heinzel

Makara Journal of Technology

Development of fuel cladding and structural materials in Pb-Bi environment, especially at high temperature, is a critical issue for the deployment of LFR (Lead alloy-cooled Fast Reactor) and ADS (Accelerator Driven Transmutation System). This is because of the corrosive characteristic of Pb-Bi to metals as constituent materials of fuel cladding and structural of the reactors. Corrosion test of a high-chromium austenitic stainless steel i.e. SS316Ti in molten Pb-Bi at 550 ºC has been carried out for about 300 hours continuously. The characterization using SEM-EDS (Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy) showed that an iron oxide as the outer …

Synthesis Of Libob Fine Powder To Increase Solubility, Etty Marti Wigayati, Titik Lestariningsih, Christin Rina Ratri, Ibrahim Purawiardi, Bambang Prihandoko

Makara Journal of Technology

Lithium bis (oxalate) borate or LiBOB compound has captured interest of researchers, because it is potentially viable to be used as electrolyte salt in lithium-ion battery system. This compound is easy to synthesize and considered to be more environmentally friendly compared to conventional electrolyte salt because LiBOB does not contain halogen element. This research focused on the synthesis of LiBOB fine powder, which main purpose is improving LiBOB salt solubility in liquid electrolyte solution. This will aid the ion transfer between electrodes which in turn will increase the electrolyte performance. Solid state reaction was employed in this experiment. Synthesis of …

Influence Of Polyethylene Glycol (Peg) In Cmc-Nh4br Based Polymer Electrolytes: Conductivity And Electrical Study, Nur Khalidah Zainuddin, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried with new type and promising polymer electrolytes system by development of carboxyl methylcellulose (CMC) doped NH4Br and plasticized with polyethylene glycol (PEG). The sample was successfully prepared via solution casting with no separation phase and good mechanical properties. The electrical conductivity and thermal conductivity of CMC-NH4Br-PEG based PEs system have been measured by the electrical impedance spectroscopy method in the temperature range of 303–373 K. The highest ionic conductivity gained is 2.48 x 10-3 Scm-1 at ambient temperature for sample contain with 8 wt. % PEG. It can be concluded that the plasticized is accountable …

Purification Simulation With Vapor Permeation And Distillation-Adsorption In Bioethanol Plant, Misri Gozan, Mia Sari Setiawan, Kenny Lischer

Makara Journal of Technology

High purity of Bioethanol is required in biofuel mixing with gasoline (EXX). In bioethanol production line, the azeotropic property of ethanol-water becomes the barrier for purification process. This study examined two bioethanol separation processes by support of simulation tools, Superpro Designer 9.0 software. Ethanol purity and a low costeconomical process were the major considerations. Purification method of vapor permeation membrane technology was compared with distillation-adsorption method. Data from previous lab experiments and some literatures were used. The results showed that distillation-adsorption method is more economical compared to vapor permeation technology. Payback period of the simulation is 3.9 years and 4.3 …