Civil and Environmental Engineering Commons^™

Optimizing Sustainable Integrated Use Of Groundwater, Surface Water And Reclaimed Water For The Competing Demands Of Agricultural Net Return And Urban Population, Silvia Anastasia Landa

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The world population is growing rapidly. In developing countries, the growing population is mostly in urban areas. A bigger population requires more food, and more food requires more water. The water needed for food and people comes from the same sources: surface water (rivers, lakes, etc.) and groundwater (aquifers). Thus, there is a competing water demand between people and agriculture in urban areas.

In this research, we use computer software to make a model of the hydrologic system that focuses on surface water and groundwater. To make the model, we use data from real aquifers and streams in order to …

The Effects Of Upstream Straight Pipe Length On Magnetic Flow Meter Accuracy, Bradley C. Clawson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In closed conduit water systems, being able to accurately measure flow is absolutely essential. For many meter designs, including electromagnetic induction meters (also known as magnetic flow meters), the greatest accuracy is achieved when the device is calibrated correctly. Optimal meter accuracy often depends on the flow conditions associated with the upstream geometry in the pipe system. Manufacturers typically give standards for the length of straight pipe required upstream of the meter. These standards vary, however, and do not address every possible configuration that may be installed upstream of the straight pipe requirement.

An investigation on the effects of the …

Live-Load Test And Finite-Element Model Analysis Of A Steel Girder Bridge, Jake L. Morrill

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Utah Transportation Center in conjunction with the Mountain Plains Consortium sponsored a study to investigate the performance, and condition of a steel, twin, I-girder bridge. The bridge is located on the Idaho-Oregon border near Payette, Idaho, and was designed to carry traffic over the Snake River.

Bridge Diagnostics Inc. was contracted by the Idaho Transportation Department to perform a live-load test on the bridge. This testing included the placement of 62 gauges that measured the response of the bridge as heavy trucks were driven across it.

A 3-D finite-element model of the bridge was generated and compared to the …

Evaluation Of Unbound Pavement Layers Moduli Using The Miniaturized Pressuremeter Test, Alaa Mohammed Shaban

Theses and Dissertations

A small version of pressuremeter known as Miniaturized Pressuremeter (MPMT) was designed and built to provide high quality pavement parameters. The device, which is a modified version of PENCEL Pressuremeter (PPMT) has a 6 inch inflatable probe capable of quickly and reliably measuring the stress-strain response of thin pavement layers. The MPMT stress-strain data can be used as inputs to evaluate existing pavement structures as a part of a pavement management system, and as critical inputs in empirical pavement design methods. To check in-situ operational performance of the new probe, twenty four MPMT and PPMT tests were performed in parallel …

Acoustic Firearm Discharge Detection And Classification In An Enclosed Environment, Lorenzo Luzi, Eric Gonzalez, Paul Bruillard, Matthew Prowant, James Skorpik, Michael Hughes, Scott Child, Duane Kist, John E. Mccarthy

Mathematics Faculty Research

Two different signal processing algorithms are described for detection and classification of acoustic signals generated by firearm discharges in small enclosed spaces. The first is based on the logarithm of the signal energy. The second is a joint entropy. The current study indicates that a system using both signal energy and joint entropy would be able to both detect weapon discharges and classify weapon type, in small spaces, with high statistical certainty.

Continued Development Of A Non-Proprietary, High-Tension, Cable End Terminal System, Jennifer D. Schmidt, Robert W. Bielenberg, John D. Reid, Ronald K. Faller

Nebraska Department of Transportation: Research Reports

A non-proprietary, cable guardrail system is currently under development for the Midwest States Pooled Fund Program. A cable guardrail end terminal was necessary to accompany the cable guardrail system. The objective of this research project was to develop design recommendations for the cable end terminal. Bogie testing that was previously completed on a design concept indicated delayed cable release, which was an undesired performance that led to vehicle instabilities. Several design changes were recommended for better end terminal performance and to reflect the changes made to the cable median barrier. An LS-DYNA model of the modified cable end terminal was …

Hydrogeological Conceptual Model Of La Villa River Watershed, Republic Of Panama, Maria G. Castrellon Romero

Honors Scholar Theses

Groundwater in Panama is a valuable and poorly understood resource. Its exploitation has increased 75% in the past decade, reaching a total value of 700,000 m³/day or 185 million gallons per day (MGD). Climate change has caused a lengthening of the dry season, which has reduced precipitation and streamflow, resulting in surface water scarcity during this period. Nevertheless, it has not been possible to determine the extent to which groundwater sources have been affected by these factors since systematic monitoring of groundwater levels has not been implemented in Panama. With support from National Institution of Drinking Water Supply …

Engineering Phd Student Wins Awra Competition | College Of Engineering, Usu College Of Engineering

College of Engineering News

April 27, 2016 — Civil and environmental engineering and Water Lab PhD student Ayman Alafifi won first place in theAmerican Water Resources Association Utah Chapter student paper competition on April 13.

He received the award for his research work, "Systems Modeling to Improve River and Riparian Habitat Quality." The presentation was given at the Utah Division of Water Resources offices in Salt Lake City.

Civil Engineering And Construction News, Georgia Southern University

Civil Engineering & Construction: News & Publications (2011-2022)

• 2015 Newsletter – Dr. Mike Jackson
• 4th Annual CM Guild Clay Shoot & CECM Senior Banquet

Evaluation Of Alternative Implementation Methods Of Failure Sampling Approach For Structural Reliability Analysis, Kapil Patki, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

In this paper, several alternative approaches are used to implement the failure sampling method for structural reliability analysis and are evaluated for effectiveness. Although no theoretical limitation exists as to the types of problems that failure sampling can solve, the method is most competitive for problems that cannot be accurately solved with reliability index-based approaches and for which simulation is needed. These problems tend to have non-smooth limit state boundaries or are otherwise highly nonlinear. Results from numerical integration and three extrapolation approaches using the generalized lambda distribution, Johnson's distribution, and generalized extreme value distribution are compared. A variety of …

Estimation Of Surface Soil Moisture In Irrigated Lands By Assimilation Of Landsat Vegetation Indices, Surface Energy Balance Products, And Relevance Vector Machines, Alfonso F. Torres-Rua, Andres M. Ticlavilca, Roula Bachour, Mac Mckee

Civil and Environmental Engineering Faculty Publications

Spatial surface soil moisture can be an important indicator of crop conditions on farmland, but its continuous estimation remains challenging due to coarse spatial and temporal resolution of existing remotely-sensed products. Furthermore, while preceding research on soil moisture using remote sensing (surface energy balance, weather parameters, and vegetation indices) has demonstrated a relationship between these factors and soil moisture, practical continuous spatial quantification of the latter is still unavailable for use in water and agricultural management. In this study, a methodology is presented to estimate volumetric surface soil moisture by statistical selection from potential predictors that include vegetation indices and …

Improved Methodologies In Modeling And Predicting Failure In Aashto M-180 Guardrail Steel Using Finite Element Analysis, Phase I, Brandt M. Humphrey

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Steel guardrail systems have historic and widespread applications throughout the nation’s highways and roadways. However, catastrophic system failure can occur if the guardrail element ruptures, thus allowing an errant vehicle to pass uncontrolled through the system and potentially allow fractured ends to pierce the occupant compartment. To aid in the analysis and design of guardrail systems, further efforts are needed to develop and implement more reliable material failure criteria to predict and model guardrail steel rupture under all vehicle impact loading scenarios within impact simulation finite element method (FEM) software, such as LS-DYNA.

This Phase I study accomplished a number …

Mapping Evapotranspiration With High-Resolution Aircraft Imagery Over Vineyards Using One- And Two-Source Modeling Schemes, Ting Xia, William P. Kustas, Martha C. Anderson, Joseph G. Alfieri, Feng Gao, Lynn Mckee, John H. Prueger, Hatim M.E. Geli, C.M.U. Neale, Luis Sanchez, Maria Mar Alsina, Zhongjing Wang

Daugherty Water for Food Global Institute: Faculty Publications

Thermal and multispectral remote sensing data from low-altitude aircraft can provide high spatial resolution necessary for sub-field ( 10 m) and plant canopy (1 m) scale evapotranspiration (ET) monitoring. In this study, highresolution (sub-meter-scale) thermal infrared and multispectral shortwave data from aircraft are used to map ET over vineyards in central California with the two-source energy balance (TSEB) model and with a simple model having operational immediate capabilities called DATTUTDUT (Deriving Atmosphere Turbulent Transport Useful To Dummies Using Temperature). The latter uses contextual information within the image to scale between radiometric land surface temperature (TR) values representing hydrologic limits of …

Relating Anaerobic Digestion Microbial Community And Process Function, Kaushik Venkiteshwaran, Benjamin T.W. Bocher, James Maki, Daniel Zitomer

Biological Sciences Faculty Research and Publications

Anaerobic digestion (AD) involves a consortium of microorganisms that convert substrates into biogas containing methane for renewable energy. The technology has suffered from the perception of being periodically unstable due to limited understanding of the relationship between microbial community structure and function. The emphasis of this review is to describe microbial communities in digesters and quantitative and qualitative relationships between community structure and digester function. Progress has been made in the past few decades to identify key microorganisms influencing AD. Yet, more work is required to realize robust, quantitative relationships between microbial community structure and functions such as methane production …

Investigation On The Effect Of Recycled Asphalt Shingle (Ras) In Portland Cement Mortar, Jinwoo An, Boo Hyun Nam, Heejung Youn

Civil Engineering Faculty Publications

Tear-off roofing shingle, referred to as Reclaimed asphalt shingle (RAS), is the byproduct of construction demolition and it is a major solid waste stream in the U.S. Reuse of this byproduct in road construction sector can contribute to the success of materials sustainability as well as landfill conservation. Ground RAS has similar particle distribution as sand and its major component includes aggregate granules, fibers, and asphalt. To promote the beneficial utilization of RAS, this study evaluates the effect of RAS in cement mortar when used as replacement of sand. In addition, the study investigates how cellulose fibers from RAS behave …

Evaluation Of Resistance To Rutting And Moisture Susceptibility On High Rap Content Asphalt Concretes Using Hamburg Wheel Tracking Device, Sungun Kim

GS4 Student Scholars Symposium

Reclaimed or recycled asphalt pavement (RAP) stands for materials that are removed and reprocessed asphalt pavement materials. It is usually from asphalt road maintenance and reconstruction. Past research has proved that the use of RAP will save natural resources by incorporating the old asphalt and aggregates into the new asphalt paving material production. This practice results in cost reduction in roadway construction and maintenance, and thus benefits both the agencies and the public. However, there is a concern over the strength and durability of the pavements containing high RAP content because the old asphalt binder and aggregates aged by traffic …

Application Of Web Published Virtual Instruments In Delivering Engineering Instructions And Performing Experimental Research, Shahnam Navaee

GS4 Student Scholars Symposium

In this presentation the special utility of the LabVIEW Virtual Instruments published as HTML files is documented and discussed. The Virtual Instruments (LabVIEW programs) created using the software's web publishing tool can be used to complement the effectiveness of the classroom instructions and extend the reach of engineering researchers in more effectively conducting laboratory and field experimentation. The Virtual Instruments (VIs) created as web documents can be placed on a web-server and made available to users at remote locations. These files can enhance the collaborations and interactions among individuals at these stations. For example, the created VIs for a course …

Accelerated Insulation Recycling System (Airs), Debalina Ghosh

GS4 Student Scholars Symposium

Construction and demolition waste accounts for 52 % of the total landfilled space. While many advances in disassembly sequencing in buildings have been proposed to recycle concrete, steel, and tile associated with construction and demolition waste, the insulation contained within every building persists as a significant environmental challenge to recycle and reuse. Adding to this problem is the fact that when petroleum based foams are incinerated, it emits carbon monoxide, nitrogen oxides, isocyanine, acrylonitrile, and hydrogen cyanide in levels exceeding those allowed by the EPA, posing a significant threat to the environment and human health. Design for Disassembly (DfD) approach …

Warning Systems Evaluation For Overhead Clearance Detection, Clayton Rogers

GS4 Student Scholars Symposium

The accurate detection of road vehicle heights is a need that arises in departments of transportation across the nation. Usually, this dimension is required to solve various transportation issues. In particular, numerous bridges in the state of Georgia have been affected by repetitive crashes of tall vehicles against their structural elements. As an example, a recent inspection report of the Houlihan Bridge over the Savannah River documents damages resulting from numerous hits by overheight vehicles. This case emphasizes the urgency of finding preventive measures. To address this issue, a number of solutions are investigated. The known methods of vehicle height …

14-02 Developing Public Health Performance Measures To Capture The Effects Of Transportation Facilities On Multiple Public Health Outcomes, Colleen Casey, Stephen Mattingly, Jianling Li, James Williams

Transportation Research Center Reports

Increasingly, federal transportation and public health agencies are working together to identify transportation investments that improve public health. Investments in transportation infrastructure represent one method to utilize transportation to improve public health outcomes. The ideal transportation investment is one that not only provides safe access for pedestrians, bicyclists, motorists and transit riders, but it also promotes more utilitarian or recreational trips for walking and biking in an environment of safe air quality. However, public health objectives can be at conflict when designing transportation infrastructure to support active commuting. For example, infrastructure investments may be made that promote physical activity through …

Structural Evaluations Of Bridges With Smartphones, Garrett P. Martindale, Dean Whitfield, Jeremiah Dixon

UCARE: Research Products

According to the 2013 Report Card for America’s Infrastructure, published by the American Society of Civil Engineers (ASCE), the United States has a bridge rating of C+. The C rating is classified by ASCE as a mediocre standing. Infrastructure that is awarded the C rating shows general signs of deterioration and requires attention.

Our Hypothesis: Smartphones have become readily available to anyone and is a relatively cheap device. They have instruments within them that can capture and collect usable data. An application can be downloaded to record the smartphone’s acceleration. The acceleration data can be used to evaluate vibrations within …

Shear Testing Of Precast Concrete Sandwich Wall Panel Composite Shear Connectors, Taylor Sorensen, Jaiden Olsen, Marc Maguire

Student Research Symposium

As energy codes become more stringent, thermal efficiency of Precast Concrete Sandwich Panel Walls has become more important. This paper addresses the problem of predicting the behavior of full scale precast concrete sandwich panel walls, using data collected from small, inexpensive push-off specimens. Several fiber reinforced polymer (FRP) connectors being used today underwent shear testing performed on component scale push-off specimens. Each specimen contained several of the FRP connectors and the variables studied were wythe thickness, insulation type and insulation bond. A simplified beam spring model was created which uses beams to represent the concrete wythes and shear springs to …

Optimal Location For Bike Sharing Stations In Downtown Kalamazoo, Lizmert Lopez Gonzalez

Research and Creative Activities Poster Day

At present, emphasis is on increasing physical activities and expanding access to goods and services through non-motorized modes in order to enhance safety, social sustainability in transportation equity, environmental justice, and public health. Hence, there is an interest in developing bike sharing systems to encourage non-motorized activities in cities. This study focuses on developing a bike sharing system for city of Kalamazoo. One key parameter for a successful system is to identify optimum locations for bike sharing stations. This poster presents implementation of location-allocation models and spatial analysis tools to determine the most suitable locations for bike sharing stations within …

Design And Testing Of Sorbents For Co2 Separation Of Post-Combustion And Natural Gas Sweetening Applications, Jiajun He, John To, Peter Psarras, Jianguo Mei, Jen Wilcox

CO2 Summit II: Technologies and Opportunities

In post-combustion processes, sorbents with both high capacity and selectivity are required for reducing the cost of carbon capture. Although physisorbents have the advantage of low energy consumption for regeneration, it remains a challenge to obtain both high capacity and sufficient CO₂/N₂ selectivity at the same time. A novel N-doped hierarchical carbon has been developed, which exhibits record-high Henry’s law CO₂/N₂ selectivity among physisorptive carbons while having a high CO₂ adsorption capacity. Specifically, the synthesis involves the rational design of a modified pyrrole molecule that can co-assemble with the soft Pluronic template via …

Techno-Economic Challenges Associated With Biomass Energy Utilization And Ccs, Carl Bozzuto

CO2 Summit II: Technologies and Opportunities

Despite the recent agreement by world leaders regarding the need for reductions in CO2 emissions from the global energy system, there will still be substantial amounts of fossil fuels utilized for the next few decades. According to IEA estimates, there will likely be an “overshoot” of the CO₂ concentration that is estimated to be needed to restrain average global temperatures increases in the range of 1.5–2˚C. As a result, biomass energy has been proposed as one means to reduce net CO₂ emissions and, perhaps, even reduce the level of CO₂ in the atmosphere. One approach has been …

Evaluation Of Physical Adsorbents For Post-Combustion Co2 Capture, Youssef Belmabkhout

CO2 Summit II: Technologies and Opportunities

CO₂ capture using physical adsorbents such as activated carbon, zeolites, and metal-organic frameworks (MOFs) have attracted a lot of attention because of the technical capability of adsorption technology using such separation agents to retrofit the energy demanding liquid amine scrubbing process. Nevertheless, this will be conceivable only if the separation agents (adsorbents) in question fulfil many unambiguous attributes in terms of porosity, CO₂ affinity, kinetics, energetics, stability, throughout the right capture mechanism, in addition to the adsorbents cost.

In this paper we report recent study about the evaluation of physical adsorbents for CO₂ capture from simulated flue …

Metallic Membranes For N2 Separation & Post-Combustion Co2 Capture Improvement, Simona Liguori, Kyoungjin Lee, Jennifer Wilcox

CO2 Summit II: Technologies and Opportunities

Carbon (CO₂) capture represents an important role in the reduction greenhouse gas emissions. Among various CO₂ capture technologies currently investigated, post-combustion capture allows for the retrofitting of existing plants and industrial units. Today, the amine scrubbing is considered the most competitive method for CO₂ removal in the flue gases from power plants in comparison to other technologies. Nevertheless, recent work has shown that the energy requirement for solvent recovery can decrease the overall efficiency of the power plants up to 16%¹. Moreover, additional costs may occur in the solvent absorption technology because of solvent …

Co2 Capture Using Nanoporous Tio(Oh)2/Tetraethylpentamine, Maryam Irani, Maohong Fan, Khaled Gasema

CO2 Summit II: Technologies and Opportunities

In this work, an inorganic-organic CO2 sorbent was prepared by immobilizing tetraethylenepentamine (TEPA) onto nanoporous titanium oxyhydrate (TiO(OH)2). The prepared sorbents were characterized using X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET) analysis. At the optimal TEPA loading of 60 wt.% on TiO(OH)2, its CO2 sorption capacity reached 3.1 mmol CO2/g-sorbent for 1 vol.% CO2 in N2 along with ~1 vol.% H2O at 60°C. Studies of adsorption kinetics and thermodynamics showed that the activation energies for CO2 adsorption and desorption of TiO(OH)2/TEPA are 38.31 kJ/mol and 44.51 kJ/mol, respectively. Its low …

Nitrogen-Functionalized Porous Carbons For Enhanced Co2 Capture, Peter Psarras, Jennifer Wilcox

CO2 Summit II: Technologies and Opportunities

The global consequences of increased anthropogenic carbon dioxide emissions are well documented. To avoid the catastrophic long-term damages associated with climate change, much attention has been devoted to the development of CO₂ emission mitigation strategies. A present challenge in the mitigation of anthropogenic CO₂ emissions involves the design of less energy- and water-intensive capture technologies. Traditional capture methods, e.g. MEA solvent scrubbing, have prohibitive regeneration costs, and recent concerns in drought-ridden states like California have brought these water-intensive processes under increased scrutiny. Sorbent-based capture represents a promising solution to the aforementioned hurdles, as they do not incur the …

Direct Air Capture Versus Post Combustion Capture For Coal Fired Power Plants: Energy Balance And Life Cycle Environmental Assessment, Christoph Meinrenken

CO2 Summit II: Technologies and Opportunities

Direct air capture (DAC) has been suggested as a possible alternative to post combustion capture (PCC), as a way to lower the climate impact of fossil-based electricity generation. However, various literature suggests that the much lower concentration of CO2 in ambient air (compared to flue gas) will cause DAC to require ~3x higher energy consumption than PCC per ton CO2 captured, in turn leading to impractically high parasitic loads, costs, and potentially other adverse environmental impacts of DAC for purposes of mitigating emissions from e.g. coal-fired power plants. Here we present a comparative techno-economic and life cycle assessment (LCA) of …